Post by: Xbox-Scene on January 24, 2009, 08:23:00 PM
| A new beta version of JungleFlasher (the flasher that came with Team Jungle's IXtreme 1.5 release) has been released: Quote
Official Site: n/a, by Team Jungle Download: here News-Source: xbins.org |
Post by: moutainDEW883 on January 24, 2009, 09:53:00 PM
Post by: OggyUK on January 24, 2009, 10:01:00 PM
Download
This post has been edited by OggyUK: Jan 25 2009, 06:02 AM
Post by: ruph on January 24, 2009, 10:29:00 PM
Post by: diddyk on January 24, 2009, 11:34:00 PM
Post by: Serious Sam on January 24, 2009, 11:56:00 PM
Was hoping it would work this time with Vista (IMG:style_emoticons/default/sad.gif)
This post has been edited by Serious Sam: Jan 25 2009, 07:56 AM
Post by: gaatjenixaan on January 25, 2009, 01:46:00 AM
QUOTE(Serious Sam @ Jan 25 2009, 08:32 AM) 
Still not working in Vista x86 Ultimate. A message pops up saying "No VIA ports were found!" When I click OK windows locks up and I have to reset my PC. I do not have a VIA card in this PC. I only have the onboard Nforce 570 SATA.
Was hoping it would work this time with Vista (IMG:style_emoticons/default/sad.gif)
Same here, "No VIA ports were found!"
Post by: neildo on January 25, 2009, 02:19:00 AM
Had no issues with .26 beta on this setup:
Via 8237 sata on motherboard
Via 6421A pci card
This post has been edited by neildo: Jan 25 2009, 10:28 AM
Post by: DevilDave on January 25, 2009, 04:59:00 AM
QUOTE(moutainDEW883)
Is there a guide or tutorial for using jungle flasher to flash a benq drive yet? I have not been able to find one.
Yes. Here is a guide to flash the benq and the sammy drive with JF guide
I recently used it to flash a samsung ms28 and it worked like a charm.
Post by: offtopic on January 25, 2009, 05:04:00 AM
Thanks
ps
what version Firmtool ?? 1.3.1
This post has been edited by offtopic: Jan 25 2009, 01:07 PM
Post by: OggyUK on January 25, 2009, 05:46:00 AM
QUOTE(Serious Sam @ Jan 25 2009, 07:32 AM) 
Still not working in Vista x86 Ultimate. A message pops up saying "No VIA ports were found!" When I click OK windows locks up and I have to reset my PC. I do not have a VIA card in this PC. I only have the onboard Nforce 570 SATA.
Was hoping it would work this time with Vista
QUOTE(gaatjenixaan @ Jan 25 2009, 09:22 AM)
Same here, "No VIA ports were found!"
Try following the Appendix of the user guide and delete VIA Ports Only from Registry Settings.
Post by: kinvig on January 25, 2009, 06:28:00 AM
When using the new version of JF on loading older dummy.bin files created by the older JF, it pops up a window saying,
dummy.bin is missing some drive specific information and that it if possible should re-extract drive info again with the latest tools - proceed anyway ?.
Does anyone know what this specific info is and how detrimental it is to the operation of the console ?
regards
Kinvig
Post by: neildo on January 25, 2009, 06:57:00 AM
This post has been edited by neildo: Jan 25 2009, 02:58 PM
Post by: PurpleHippo on January 25, 2009, 08:27:00 AM
After around 10 seconds pc resets (screen goes black, and bios screen appears}
After bios screen windows does not load, instead the following message appears:
Reboot and select proper boot device, or insert media in selected boot device and press a key
I have to reset the PC again to get back into windows.
Asus a8v deluxe motherboard with VIA VT8237 on sata
Jungleflasher 0.26 beta worked fine.
Post by: RRoD420 on January 25, 2009, 10:26:00 AM
No onboard sata
Works like a mexican, lets keep 'em around. Thanks Team Jungle!
Post by: ghaladream on January 25, 2009, 11:01:00 AM
QUOTE(neildo @ Jan 25 2009, 05:55 AM)
GUI doesn't appear and JungleFlasher.exe running at 99% cpu continously.
Had no issues with .26 beta on this setup:
Via 8237 sata on motherboard
Via 6421A pci card
EXACT Same problem. No onboard Sata, Via 6421A PCI Card.
Post by: mUb on January 25, 2009, 11:51:00 AM
QUOTE(kinvig @ Jan 25 2009, 02:04 PM)
Hi Guys
When using the new version of JF on loading older dummy.bin files created by the older JF, it pops up a window saying,
dummy.bin is missing some drive specific information and that it if possible should re-extract drive info again with the latest tools - proceed anyway ?.
Does anyone know what this specific info is and how detrimental it is to the operation of the console ?
regards
Kinvig
I`m having the same issue here too. Can anyone shed any light?
Post by: barzi on January 25, 2009, 12:01:00 PM
Post by: jelle250386 on January 25, 2009, 01:17:00 PM
QUOTE(mUb @ Jan 25 2009, 08:27 PM)
I`m having the same issue here too. Can anyone shed any light?
either they failed to code proper dummy.bin recognition
or
if recognition of the firmware is ok, dummy.bin created by the old JF was faulty
or it
could mean they wrote new code to prepare the dummy.bin more properly now
either way its quirky program to me, just use dosflash for liteon , then firmtool that dummy.bin onto the liteonixtreme. i use dosflash for benq/samsung/liteon. i don't require JF
it's a good thing to write a windowsbased all-in flasher that does about everything you could do, but it too big of a project for now i don't use it. if in all glory it oneday works without any issues then i'm real impressed
Post by: Millerboy3 on January 25, 2009, 01:32:00 PM
QUOTE(jelle250386 @ Jan 25 2009, 03:53 PM)
either they failed to code proper dummy.bin recognition
or
if recognition of the firmware is ok, dummy.bin created by the old JF was faulty
or it
could mean they wrote new code to prepare the dummy.bin more properly now
either way its quirky program to me, just use dosflash for liteon , then firmtool that dummy.bin onto the liteonixtreme. i use dosflash for benq/samsung/liteon. i don't require JF
it's a good thing to write a windowsbased all-in flasher that does about everything you could do, but it too big of a project for now i don't use it. if in all glory it oneday works without any issues then i'm real impressed
+1
Post by: Zan3 on January 25, 2009, 03:04:00 PM
What PC do you guys have? chipset? via card?... what makes it freez like that? im getting my CK3 probe soon and whant to know if im set up to go all the way in jungle flasher.
Post by: antz1970 on January 25, 2009, 03:27:00 PM
Post by: MickRick on January 25, 2009, 04:23:00 PM
QUOTE(moutainDEW883 @ Jan 25 2009, 05:29 AM)
Is there a guide or tutorial for using jungle flasher to flash a benq drive yet? I have not been able to find one.
Heres my guide if it's any use:
1. Connect your Benq to your pc's sata controller and boot into Windows WITHOUT turning the drive on. Once in Windows, turn the drive on.
2. Start Jungleflasher and click the MTK Flash 32 tab
At the I/O Port section on the left hand side, select the port that shows your Benq drive in the Drive
Properties section
Click the Benq Unlock button - a message will appear saying the drive is unlocked
Click the Read button and your existing Benq firmware will be read - save this file. It will be called
BENQ-OFW.bin
3. Click the FirmwareTool 32 tab
Click the Load Source Firmware button and select your BENQ-OFW.bin file
Click the Open Target Firmware button and select the ix15Benq.bin
Click Spoof Source To Target button
Click the Save To File button - save as Benq_CFW.bin
4. Click the MTK Flash 32 tab again
Click Write and your drive will first be erased and then the Benq_CFW.bin will be written to your drive.
Thats it really.
QUOTE(antz1970 @ Jan 25 2009, 11:03 PM)
great work to all involved in this software etc , what i would like to know is.........is there any major reason to use this version of jungleflasher if the previous version worked fine for you?
I'm thinking the FirmTool 32 Liteon bug has been resolved with this release.
QUOTE(Zan3 @ Jan 25 2009, 10:40 PM)
To these who have made it all way in jungleflasher, like Read(of course), erase & write successfull without make the PC freez...
What PC do you guys have? chipset? via card?... what makes it freez like that? im getting my CK3 probe soon and whant to know if im set up to go all the way in jungle flasher.
Don't use Jungleflasher for Liteon erase/write. Use Dosflash16 (DOS version) and L-O-Eras.
Post by: somenutter on January 25, 2009, 07:00:00 PM
QUOTE(Zan3 @ Jan 25 2009, 11:40 PM)
To these who have made it all way in jungleflasher, like Read(of course), erase & write successfull without make the PC freez...
What PC do you guys have? chipset? via card?... what makes it freez like that? im getting my CK3 probe soon and whant to know if im set up to go all the way in jungle flasher.
i didnt make it all the way in jf
To cut a long story short it took me 2 days of pissing around to find out what to do so here gos
get a VIA VT6421A (i already had one) install a fresh copy of windows vista 32bit install all your board drivers etc then install Port IO and the CK3 PRO usb drivers shut down connect CK3 and drive start pc eject liteon push half way back in turn off turn on boot to windows run jf connect probe dump key etc.. but after that it freezes if you try to flash the drive so i dont bother grab xflasher
http://forums.xbox-s...howtopic=674210
and run the program with your usb stick put all of your dumped files in a folder called 12345 thats inside a folder like this on the pen drive usb drive:\BACKUPS\1234567\12345 then rename the hacked firmware you made with jf to hack-lit.bin instead of the name jf gives it otherwise xflasher wont recognise it reboot go into bios change your pc to boot from usb run xflasher when it asks what serial your xbox is put in 1234567 12345 then it will say you must of dumped your keys before so just go ahead and erase the drive and flash it works like a dream
hope that helps my motherboard is a asus p5k deluxe ive got 4gb of ram and 2 samsung f1s in raid 0 and an nvidia 8800gts
Post by: goaliedude on January 25, 2009, 07:23:00 PM
Post by: X-hacker on January 25, 2009, 08:48:00 PM
Installed PortIO, run jungleflasher and my pc freezes for about 10 secs then I get a BSOD...
Something like "INVALID PAGE CALLER" or something along them lines...
Stick with 0.26 I think...
Post by: bill16504 on January 26, 2009, 05:00:00 PM
MSI mobo with NForce 2 chipset
Post by: tapanet on January 28, 2009, 09:37:00 AM
Post by: bishop05 on January 28, 2009, 08:08:00 PM
the CPU spiked to 99%, i continued to dump the files, spoofed the FW.
I went to erase and the app froze.
I needed to use iprep to erase the drive with L-O-Eras, I used JF again to flash....
Strange!
XP SP3 (Clean intall)
VIA 6421A PCI card.
intel Motherboaed.
This post has been edited by bishop05: Jan 29 2009, 04:16 AM
Post by: mr2000jp on January 28, 2009, 09:03:00 PM
driver is installed ,using via pci card 6421a and winxpsp2 framework 2 installed too, and jf.26 works almost every thing but hangs when flashing ,
Post by: MODMANMIKE on January 30, 2009, 08:52:00 PM
Post by: CCaine on February 01, 2009, 07:36:00 AM
'viaportsonly' and set it to 0 (this one worked for me)
This post has been edited by CCaine: Feb 1 2009, 03:37 PM
Post by: Refferehtom on February 03, 2009, 10:01:00 AM
Is it essential to use those drivers?
Post by: offtopic on February 05, 2009, 08:55:00 AM
How can unpack Identify, Inquiry, Key from dummy.bin ?
Post by: Millerboy3 on February 05, 2009, 02:10:00 PM
Post by: Refferehtom on February 05, 2009, 06:46:00 PM
Oh well
Post by: inc209 on February 09, 2009, 09:56:00 PM
Using a dell vostro 410 with intel sata chipset, ck3 and probe.
I've flashed lite-on, ben-q, sammy, and used hitach un-lock tools. However, I had to use maximus to dump and flash.
I have another dell sitting in my living room, which is a 4 year old computer with on-board intel sata. That also works flawless. I use windows XP for flashing as vista had issues in the past bricking a drive.
I will not try the JF 0.43 since there's no issues now.
Post by: stoatie_weasel on February 14, 2009, 07:47:00 AM
Post by: larrylje on March 03, 2009, 12:24:00 PM
QUOTE(stoatie_weasel @ Feb 14 2009, 11:23 AM)
Was having the same problem as some of you.. JF .26 working no problems but when I came to use .43 It wouldn't open and the CPU usage was at 99%. Eventually got it working by deleting the Jungleflasher folder in the registry then uninstalling the PortIO32 driver, . Restarted the computer and ran .43, GUI opens. Unticked Via ports only and exited. Installed PortIO32 and restarted. Success. Hope this helps.
Thank you for these directions.
Was about to tear my hair out till I came across your post.
Worked great!
Thanks again!
Post by: GIBI360 on March 06, 2009, 01:32:00 PM
What do you mean by GUI opens "unticked via ports only" and exited ? I 'll see if this works for me
This post has been edited by GIBI360: Mar 6 2009, 09:34 PM