Post by: Xbox-Scene on January 18, 2009, 07:37:00 PM
| Trancy released a new version of Xflasher 360 on modcontrol.com. The tool is now also available in english and french: Quote
Official Site: modcontrol.com Download: here |
Post by: Redx508 on January 18, 2009, 08:55:00 PM
Post by: ubiman on January 18, 2009, 09:05:00 PM
Post by: Wateva on January 18, 2009, 10:31:00 PM
Post by: dom0012 on January 19, 2009, 01:45:00 AM
Post by: Klutsh on January 19, 2009, 01:47:00 AM
Post by: hitman43 on January 19, 2009, 02:18:00 AM
QUOTE(dom0012 @ Jan 19 2009, 10:21 AM) 
jungleflasher and dosflash FTW!!!!!!!!!!!!!!!!!!!!!!!!!!
Hi, yeah, but this you can also read inside the fullreadme.txt file and of course, we never say, that we made a tool that comes with a new programm/routine.
Sure, the also uses DosFlash and FirmTool, because it is the best choice. We only made an exe for DOS to let users use dosflash and firmtool easier.
QUOTE
Thanks goes to:
---------------
- c4eva for the iXtreme Firmware
- Geremia, Modfreakz and Kai Schtrom for DosFlash
- Caster420 for FirmTool
- hitman43, Arakon, Legueux and MountieXXL for the translations and beta testing
---------------
- c4eva for the iXtreme Firmware
- Geremia, Modfreakz and Kai Schtrom for DosFlash
- Caster420 for FirmTool
- hitman43, Arakon, Legueux and MountieXXL for the translations and beta testing
QUOTE(Klutsh @ Jan 19 2009, 10:23 AM)
They could have changed the names of the files they ripped out of iPrep, lol
Hi Klutsh, we didn´t want and of course didn´t rip of your work on iPrep, our idea behind this little tool was to make the read/flash/spoof procedure a little bit easier of course also with other languagesupport, because a lot of german and french people have problems to understand english.
Also some people with a selfmade RS232 converter have problems to get the correct key, so we added the option to read the key serveral times.
Sure, it make a lot of things that your tool also can do, but every of this kind of tools makes the same, because every tool like this uses dosflash and firmtool for the flashing/reading/spoofing action.
To make an .bat that uses firmtool and dosflash isn´t the same non_big_move like our tool did/is but it is for a lot of noobs easy and that is that we want!
I hope everything is fine.
Best regards
hitman43
Post by: Klutsh on January 19, 2009, 03:23:00 AM
Take what you can from it.
I was refering to "mkubt.exe", it was originally "HPUSBF.EXE" before I renamed it.
It came with the HP USB Disk Storage Format Tool Version 2.0.6, so although not my work, it was taken from iPrep.
This post has been edited by Klutsh: Jan 19 2009, 11:28 AM
Post by: ToBbErT on January 19, 2009, 03:52:00 AM
Post by: -markie- on January 19, 2009, 07:47:00 AM
also could be handy as i have 64bit computer and programs didnt run on there i.e iprep
Post by: Iriez on January 19, 2009, 09:09:00 AM
QUOTE(hitman43 @ Jan 19 2009, 04:54 AM)
Hi, yeah, but this you can also read inside the fullreadme.txt file and of course, we never say, that we made a tool that comes with a new programm/routine.
Sure, the also uses DosFlash and FirmTool, because it is the best choice. We only made an exe for DOS to let users use dosflash and firmtool easier.
Hi Klutsh, we didn´t want and of course didn´t rip of your work on iPrep, our idea behind this little tool was to make the read/flash/spoof procedure a little bit easier of course also with other languagesupport, because a lot of german and french people have problems to understand english.
Also some people with a selfmade RS232 converter have problems to get the correct key, so we added the option to read the key serveral times.
Sure, it make a lot of things that your tool also can do, but every of this kind of tools makes the same, because every tool like this uses dosflash and firmtool for the flashing/reading/spoofing action.
To make an .bat that uses firmtool and dosflash isn´t the same non_big_move like our tool did/is but it is for a lot of noobs easy and that is that we want!
I hope everything is fine.
Best regards
hitman43
One thing xflasher does not allow, is for abit of customization. The process is TOO automated. I had someone that needed to just flash (erased fine in windows, couldnt get drive to identify) so I told him to try out xflasher in dos. Xflasher automatically starts trying to dump keys, instead of prompting you for a action. Add options to specify what actions you would like to do.
Post by: trancy on January 19, 2009, 10:43:00 AM
Post by: HotKnife420 on January 19, 2009, 12:52:00 PM
As far as BenQ & Samsung go, dosflash is about as easy as it needs to be; any more auto-simplify will only lead to bad things (hopefully not writing when you want to read).
This post has been edited by HotKnife420: Jan 19 2009, 08:53 PM
Post by: spavia on January 19, 2009, 02:25:00 PM
Can anyone help me i tryied to put the file ix15-sam i have there did not work , I renamed it nothing again any one can tell me please?
Thanks
Post by: ph7ryan on January 19, 2009, 02:34:00 PM
Oh well...I am going to try to format a flash drive with it, and then copy over every other file to a floppy....
I think that should work....
I may post back and tell you if it does...if I remember...which is probably not
Post by: drtiki on January 19, 2009, 03:59:00 PM
Anyone help?
Thanks
Post by: ph7ryan on January 19, 2009, 04:38:00 PM
and it has plenty of room to copy the backup files...the problem is when it gets to the firware tool part (spoofing part), it complains that my hack-ben is not 256kb...I wne into windows to check this and sure enough, 128kb...the odd thing is that my orig.bin is 256kb...any help would be greatly appreciated....
thanks
Post by: gfxdreams on January 19, 2009, 06:36:00 PM
This tool would of been awesome than and I can imagine it's only going to get better! Anything that makes it more effortless people will enjoy the entire process more!
~gfxdreams
Post by: s1k3sT on January 19, 2009, 08:23:00 PM
QUOTE(hitman43 @ Jan 19 2009, 04:54 AM)
Also some people with a selfmade RS232 converter have problems to get the correct key, so we added the option to read the key serveral times.
I've been having no luck using jungleflash with a rs232 to usb converter, do you think this would solve my problems?
Post by: hitman43 on January 20, 2009, 12:39:00 AM
Post by: spavia on January 20, 2009, 01:38:00 AM
QUOTE(spavia @ Jan 20 2009, 12:01 AM) 
Im having a problem, after i select the Language an error comes saying it did not find the ix15Sam.bin in the firmware folder.
Can anyone help me i tryied to put the file ix15-sam i have there did not work , I renamed it nothing again any one can tell me please?
Thanks
Help please
Post by: warbeast on January 20, 2009, 09:45:00 AM
QUOTE(spavia @ Jan 19 2009, 11:01 PM)
Im having a problem, after i select the Language an error comes saying it did not find the ix15Sam.bin in the firmware folder.
Can anyone help me i tryied to put the file ix15-sam i have there did not work , I renamed it nothing again any one can tell me please?
Thanks
QUOTE(spavia @ Jan 20 2009, 09:38 AM)
Help please
1st make sure its in the right folder also if you have renamed it dont add the .bin it should already be a bin file if you add .bin it would then become ix15sam.bin.bin
Post by: AngelBallz69 on January 20, 2009, 12:17:00 PM
Post by: hitman43 on January 20, 2009, 02:53:00 PM
For reading the lite-on drivekey you need an selfmade RS232 Adapter, or a Maximus Xtracor or a Xecuter Connectivity Kit v3 Pro/Lite.
When you didn´t want to solder the bridge on the dvd-rom pcb of course you will need an Spear (Maximus Xtractor) or Probe Addon (Xecuter CKV3) to read and save the drivekey.
Hope my english is good enough and understandable.
Best reagards
hitman43
Post by: AngelBallz69 on January 20, 2009, 04:47:00 PM
Post by: RoboChicken on January 20, 2009, 09:30:00 PM
QUOTE(Wateva @ Jan 18 2009, 10:07 PM)
you can always create a batch file with all the necessary steps...
That's what I did- made my own. It erases previous bins, reads, verifies that files are present, erases, then flashes, pausing between each action with dumb messages to myself
I just spacebar through the whole thing, it's great.
I left the backup commands out and do those manually since sometimes people have long a$$ names that don't comply to 8/3 naming.
Post by: tapanet on January 21, 2009, 04:59:00 PM
I erased the flash old way, and flashed again. everthing is ok now.
I never saw Xlflasher erased the flash.
Nice menu, i will try next version
Post by: trancy on January 22, 2009, 09:33:00 AM
Thanks for testing
This will be fixed in the next version soon.
Post by: DMT on January 25, 2009, 06:06:00 PM
QUOTE(tapanet @ Jan 22 2009, 02:35 AM) 
Fail to flash BENQ drive, i tried in two benqs (VIA), read and spoof ok, but after flash xflasher show error.
I erased the flash old way, and flashed again. everthing is ok now.
I never saw Xlflasher erased the flash.
Nice menu, i will try next version
Here too... I've used Xflash and my drive was f**up. Because of the writing errors. Xflasher said everything went OK.
Iprep does a erase before the write...
Flashed with Iprep 8.8 and drive worked again.
Post by: Kiton on January 26, 2009, 10:16:00 AM
MTK vendor intro failed
Anyone know what it is, and how I can fix it. I´m using a Xecuter Lite v3 and CK3 probe?
Post by: trancy on February 06, 2009, 12:24:00 PM
ver 0.77
- Bug fixing
- Fix for read DVD-Key
- Fix for erase BenQ and Samsung DVD-Rom
- Updated english, french and german How 2
http://www.modcontro...hp?postid=78066