Post by: dougiegillam on March 09, 2013, 01:53:00 AM
QUOTE(JazJon @ Mar 7 2013, 12:46 PM) 
If this is the sticky to find XBox Backup Creator, isn't v2.5 old when I find v2.9 via google searches? I want to be certain I'm finding the most update to date proper app
Last version they did was 2.9.0.425
Post by: Xbox-Scene on March 23, 2007, 11:11:00 PM
| Redline99 released a new version of Xbox Backup Creator(info), a tool that will allow you to easily dump, create/patch and burn Xbox and Xbox 360 images with full support for SS, DMI and PFI. What's new/fixed: * Lost - Change log due to bad happenings on my USB KeyDrive (Below is what I can remember, I'm sure there was more though) * Added - Ability to replace file in ISO (Up to user to know what they are doing). Easy to replace with a smaller file or Replace with a file that falls within same sector space. The file entry in the Dir Table will be patched to the correct new file size. Possible corruption if you replace with a file larger than the original. Use at your own risk. * Changed - FW Branding Check to be disabled by default * Changed - A couple tool tips to reflect correct verbiage * Changed - DVD Finalize time-outs * Changed - Command line parameters to ImgBurn depending on version. This is to deal with the .dvd message if it exists. * Fixed - 64bit IO in Image Browser Official Site: n/a, by Redline99 Download: here News-Source: xbins.org |
Post by: ScrewinGates on March 23, 2007, 10:28:00 PM
Post by: ILLusions0fGrander on March 23, 2007, 10:58:00 PM
Post by: gerzand on March 23, 2007, 11:34:00 PM
This post has been edited by gerzand: Mar 24 2007, 06:41 AM
Post by: sharris203 on March 24, 2007, 12:33:00 AM
Post by: xxYoDaddyXX on March 24, 2007, 02:36:00 AM
Post by: me7 on March 24, 2007, 04:38:00 AM
QUOTE(gerzand @ Mar 24 2007, 06:05 AM) 
does this new version address games that went gold after 1/19/2007 with the new video partition size that make it stupidly hard to rip?
That was already fixed in the previous version (2.4.0.225).
Post by: DeMoN_DARREN on March 24, 2007, 07:13:00 AM
If you don't have it though i would reccomend this program to all, use the SH-162 people!
Post by: Kharoof on March 24, 2007, 10:20:00 AM
Just thought i'd mention that the mscomctl missing file on Vista with UAC off has not been resolved and still occurs
Post by: sosotiit on March 24, 2007, 07:28:00 PM
plse take the time to read the pinned of the forum associated to your questions, answer would have been found easily. your post moved to newbie section.
rgds, soso
This post has been edited by sosotiit: Mar 25 2007, 04:19 AM
Post by: Heet on March 24, 2007, 10:29:00 PM
Post by: danejadee on March 25, 2007, 02:44:00 AM
Post by: dmanjohn on March 25, 2007, 07:20:00 AM
Post by: waynevan2000 on March 25, 2007, 04:03:00 PM
Any chance of setting my SH-D163A to default under drive specific ? I am lazy and would love to press only 2 tabs rather than 4 to create my backup's
Post by: coheedtheslayer on March 25, 2007, 10:17:00 PM
it just says that its 13 mb and the start button on the read tab isnt usable.
what do i do??
Post by: sosotiit on March 26, 2007, 05:58:00 AM
What drive are you using to extract?
and as a newcomer you have taken the time
to explore the pinned section at the top of the Newbie Chat forum ( Where To Find Help, Info, Tools For The XS Newbie PLEASE !!!READ!!! BEFORE ASKING QUESTIONS! ) as much is covered there.rgds, soso
Post by: spinemangler on March 26, 2007, 06:47:00 AM
a) boot into Windows XP, which isnt a huge issue, but XBC is now my only app that doesnt work in Vista
OR
re-enable UAC, then reboot. This requires just as much time as step a, so I usually dont do it.I just want to say that I love this program, and I'm not complaining in the slightest, but those who are using Vista can confirm the royal pain that is UAC. I have had it disabled from day one, and cannot go back, even if it does fix this minor issue.
Also, I have not tried this version, but from Kharoof's post, it seems to still exist, but I will try it when I get out of work.
Thanks
Post by: En1gma on March 26, 2007, 05:20:00 PM
Post by: En1gma on March 28, 2007, 03:39:00 PM
Post by: DazSH on March 28, 2007, 03:53:00 PM
QUOTE(En1gma @ Mar 27 2007, 12:27 AM)
Hey quick question. I'm trying to backup Virtua Tennis 3. When the image is done I go to stealth check and it passes except it says Vide is Questionable! I tried extracting and injecting as well with schtrom and XBC and still get that message when I run stealth check. Any idea what's causing this and how to fix it? Thanks!
Dont think the video is questionable is a problem i get it everytime with the new xbcr . think its just normal as it probly cant be sure with videos i wouldnt worry, it should burn fine!!!
Post by: sosotiit on March 28, 2007, 03:53:00 PM
You can also try the image check of schtrom.
but I would just burn it and forget about it, nothing very essential.
rgds, soso
Post by: sosotiit on April 05, 2007, 08:10:00 AM
since you have a thread going in the backup section on the same subject, will continue/focus the discussion there. (no cross posting
)rgds, soso
Post by: punchman1 on April 13, 2007, 12:30:00 PM
Post by: Huntsdesk on April 13, 2007, 10:24:00 PM
I've been able to rip before with older versions of your software but when I upgraded, it stopped working. I tried going back to an older version and it still wont work. It unlocks correctly...then it will start ripping. At 28% it comes up with an error saying "A read error occurred in the file system data area. If this data cannot be recovered or you choose to zero fill this section it will result in an incomplete back up. Partition Offset LBA 925648, Overall Offset LBA 1055472" Its doing it with all games now when I try ripping. This particular one is Call of Duty 3, which I know I've ripped before.
Log:
Xbox Backup Creator v2.5 Build:0230 By Redline99
Found ODD: SONY DVD RW DRU-810A 1.0e at [D]
Additional Info: Mar22 ,2006
Found ODD: TSSTcorp DVD-ROM SH-D163A SB00 at [E]
Additional Info: XB360 KREON V0.80
Nero API is not available
ImgBurn executable not found
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.87 MB (7,206,912 bytes)
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.81 GB (7,307,001,856 bytes)
Starting read process...
Target Xbox version = Xbox360
Space Available on Drive C:\ 350 GB (375,507,857,408 bytes)
Creating backup image [E]
Opening image output file
Processing Video Partition
Processing Filler Sectors
Processing PFI Sector
Processing DMI Sector
Processing Security Sector
<-- Security Sector Details -->
Source Drive: SH-D163A
Header
--------------------------------------
E10F31100004FB2000FB04DF0020339F
CPR_MAI Key
--------------------------------------
AEF09A4B
RT CID MOD DATA Drive Response
-- -- -- ------------- -----------------
03 7D 00 04A9B0 04B9AF 40468AF6 04E971F4
01 53 00 20D7F0 20E7EF 8BA2AB24 A262F2B4
03 80 00 DF85F0 DF95EF E019CFEB 2D6B78FF
01 3B 00 FB5B70 FB6B6F 92420FD4 8D6671EE
07 A6 00 04A9B0 04B72F 6833FE32 00000000
05 3D 00 20D7F0 20E56F C22A2951 5B000000
07 60 00 DF85F0 DF936F 10BC0D36 B3000000
05 8E 00 FB5B70 FB68EF 13AC982B 0D010000
E0 CA 00 FC9AF8 9B88F7 00000000 00000000
------------------------------------------
Unlocking Game Partition
Checking Game Partition Availability
Processing Game Partition
Reading XDVDFS File system
Reading Volume Descriptor
Sorting Section Map
Optimizing Section Map
Setting read speed to 12x
Setting SH-D163A error mode to 0x00
Block error recovered at Partition LBA: 925488
Block error recovered at Partition LBA: 925536
Auto setting the speed to default settings
Setting read speed to 6x
Cancelling do to read errors
Action: Read Error Partition LBA: 0x000E1FD0 (925648)
Sense Error: 5 / 20 / 00
INVALID COMMAND OPERATION CODE
CDB: Undefined
0xFF 00 BB FF 00 00
Setting read speed to 6x
A total of 32 sectors with read errors were recovered.
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.81 GB (7,307,001,856 bytes)
Read failed
This post has been edited by Huntsdesk: Apr 14 2007, 05:24 AM
Post by: mlapaglia on April 15, 2007, 12:50:00 AM
any help?
EDIT: sorry, it's 64 bit edition, if that matters.
This post has been edited by mlapaglia: Apr 15 2007, 07:51 AM
Post by: elan76 on April 21, 2007, 06:25:00 PM
Xbox Backup Creator v2.5 Build:0230 By Redline99
Found ODD: LITE-ON DVDRW SOHW-1673S JS05 at [D]
Additional Info: 2005/02/23 10:13
Found ODD: TSSTcorp DVD-ROM SH-D162C TS04 at [E]
Additional Info: XB360 KREON V0.81
Nero API is not available
ImgBurn 2.3.2.0 is available
ImgBurn - The Ultimate Image Burner! by LIGHTNING UK!
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.87 MB (7,206,912 bytes)
The Start button never gets illuminated it stays grey.
I have tried going back to version 2.3 and it stops at 3.51% everytime and says "getting security sectors" dvd read error.
Please help. I have read this and other forums for hours on end and cannot figure it out. Any Help would be awesome thanks. Should I remove AnyDVD and ImgBurn completeky? I have cosed them from running in the background.
Post by: ukbully on April 25, 2007, 04:14:00 PM
i've looked around and can't find a guide on how to use this version 2.3
just installing a samsung sh-d162 drive (flashed v0.81 Kreon Xtreme) and dl xbox backup version 2.3 i think anyone used it and if so any tips on settings and burning
i have tried 3 reads using the settings on read tab (full,mapped and current) but all are producing a 6+ gig file for a xbox 1 game i want to back up my xbox 1 games on standard dvd-r 4.7 gig disc's i know when backing up my 360 games i will need the bigger dl disc's
how do i go about producing a smaller file do i need to remove parts from the produced iso or am i missing settings that will do it for me ?
cheers
Post by: lawdawg0931 on May 01, 2007, 03:39:00 PM
Post by: sosotiit on May 01, 2007, 03:57:00 PM
-soso
Post by: lawdawg0931 on May 02, 2007, 08:04:00 AM
Post by: sosotiit on May 02, 2007, 08:31:00 AM
note that if you have that problem with both it could be the hardware. try moving you Kreon master/slave, secondary/primary IDE as a first step.
-soso
This post has been edited by sosotiit: May 2 2007, 03:40 PM
Post by: B@k3r on May 08, 2007, 06:13:00 AM
This post has been edited by B@k3r: May 8 2007, 01:21 PM
Post by: matty12 on June 24, 2007, 11:17:00 AM
I have tried copying with cd clone and the same happens.
Post by: sosotiit on June 24, 2007, 11:27:00 AM
run the stealth check in imagetools?
tried burnign with imgburn and XBC Tutorial: XBCreator & Imgburn
-soso
This post has been edited by sosotiit: Jun 24 2007, 06:28 PM
Post by: headonism on July 04, 2007, 03:18:00 AM
QUOTE(B@k3r @ May 8 2007, 01:13 PM) 
I get Unable to determine visible partion. I updated the backup creator to 2.5 and it still does it. I searched and thats what all the results were. I am also running vista...
i am having the same problems, ive now had this problem since star trek came out. i am having to extract ss, dmi and pfi.bin using xbc 2.5 then using strom to extract the iamge then i have to use ss merger 1.7 to blend it all together before burnig with clone........ i just want my xbc to work again.......
im using?:- TSSTcorp DVD-ROM SH-D162C TS04 with well over 200g of space on my hard drive, 2g ram,duel core processor
So im now thinking of calling the A team maybe they can help LOLPost by: greenleaf699 on July 04, 2007, 09:53:00 AM
QUOTE(Huntsdesk @ Apr 14 2007, 01:00 AM)
I'm running Windows Vista Prem using the newest XBC software, and running the Kreon drive/D163A. I did use the setup install before I used the program
I've been able to rip before with older versions of your software but when I upgraded, it stopped working. I tried going back to an older version and it still wont work. It unlocks correctly...then it will start ripping. At 28% it comes up with an error saying "A read error occurred in the file system data area. If this data cannot be recovered or you choose to zero fill this section it will result in an incomplete back up. Partition Offset LBA 925648, Overall Offset LBA 1055472" Its doing it with all games now when I try ripping. This particular one is Call of Duty 3, which I know I've ripped before.
Log:
Xbox Backup Creator v2.5 Build:0230 By Redline99
Found ODD: SONY DVD RW DRU-810A 1.0e at [D]
Additional Info: Mar22 ,2006
Found ODD: TSSTcorp DVD-ROM SH-D163A SB00 at [E]
Additional Info: XB360 KREON V0.80
Nero API is not available
ImgBurn executable not found
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.87 MB (7,206,912 bytes)
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.81 GB (7,307,001,856 bytes)
Starting read process...
Target Xbox version = Xbox360
Space Available on Drive C:\ 350 GB (375,507,857,408 bytes)
Creating backup image [E]
Opening image output file
Processing Video Partition
Processing Filler Sectors
Processing PFI Sector
Processing DMI Sector
Processing Security Sector
<-- Security Sector Details -->
Source Drive: SH-D163A
Header
--------------------------------------
E10F31100004FB2000FB04DF0020339F
CPR_MAI Key
--------------------------------------
AEF09A4B
RT CID MOD DATA Drive Response
-- -- -- ------------- -----------------
03 7D 00 04A9B0 04B9AF 40468AF6 04E971F4
01 53 00 20D7F0 20E7EF 8BA2AB24 A262F2B4
03 80 00 DF85F0 DF95EF E019CFEB 2D6B78FF
01 3B 00 FB5B70 FB6B6F 92420FD4 8D6671EE
07 A6 00 04A9B0 04B72F 6833FE32 00000000
05 3D 00 20D7F0 20E56F C22A2951 5B000000
07 60 00 DF85F0 DF936F 10BC0D36 B3000000
05 8E 00 FB5B70 FB68EF 13AC982B 0D010000
E0 CA 00 FC9AF8 9B88F7 00000000 00000000
------------------------------------------
Unlocking Game Partition
Checking Game Partition Availability
Processing Game Partition
Reading XDVDFS File system
Reading Volume Descriptor
Sorting Section Map
Optimizing Section Map
Setting read speed to 12x
Setting SH-D163A error mode to 0x00
Block error recovered at Partition LBA: 925488
Block error recovered at Partition LBA: 925536
Auto setting the speed to default settings
Setting read speed to 6x
Cancelling do to read errors
Action: Read Error Partition LBA: 0x000E1FD0 (925648)
Sense Error: 5 / 20 / 00
INVALID COMMAND OPERATION CODE
CDB: Undefined
0xFF 00 BB FF 00 00
Setting read speed to 6x
A total of 32 sectors with read errors were recovered.
Getting media info [E]
Media Type: DVD-ROM
Bytes Used: 6.81 GB (7,307,001,856 bytes)
Read failed
The same thing has happened to me all of a sudden with Windows XP. I tried going back to 2.4 and the same thing happened.
Has anyone got any ideas to get around this problem?
Thanks
Post by: leeds on July 10, 2007, 02:05:00 PM
Post by: kosss on July 15, 2007, 04:58:00 AM
i am having problems backing up battlefield 2 using XBC 2.5 it gets to 3.51% then has trouble reading ss sector
Xbox Backup Creator v2.5 Build:0230 By Redline99
Found ODD: HL-DT-ST DVDRAM GSA-4167B DL11 at [E]
Additional Info:
Found ODD: TSSTcorp DVD-ROM SH-D162C TS04 at [F]
Additional Info: XB360 KREON V0.81
Nero v7.0.1.4
ImgBurn 2.3.2.0 is available
ImgBurn - The Ultimate Image Burner! by LIGHTNING UK!
Getting media info [F]
Media Type: DVD-ROM
Bytes Used: 6.87 MB (7,206,912 bytes)
Found ODD: HL-DT-ST DVDRAM GSA-4167B DL11 at [1:0]
Found ODD: TSSTcorp DVD-ROM SH-D162C TS04 at [1:1]
Getting media info [1:1]
Media Type: DVD-ROM
Bytes Used: 6.87 MB (7,206,912 bytes)
Starting read process...
Target Xbox version = Xbox360
Space Available on Drive D:\ 47.2 GB (50,675,806,208 bytes)
Creating backup image [1:1]
Opening image output file
Processing Video Partition
Processing Filler Sectors
Processing PFI Sector
Processing DMI Sector
Processing Security Sector
Action: Read Security Sector
Sense Error: 6 / 29 / 00
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
CDB: READ DVD STRUCTURE
0xAD 00 FF 02 FD FF FE 00 08 00 07 C0
Get Security Sector Failed; Retrying again
Get Security Sector Failed; Retrying again
Get Security Sector Failed; Retrying again
Get Security Sector Failed; Retrying again
Get Security Sector Failed; Retrying again
Action: Read Security Sector
Sense Error: 6 / 29 / 00
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
CDB: READ DVD STRUCTURE
0xAD 00 FF 02 FD FF FE 00 08 00 05 C0
Setting read speed to 6x
Getting media info [1:1]
Media Type: DVD-ROM
Bytes Used: 6.81 GB (7,307,001,856 bytes)
Read failed
i have tried to use Schtrom but same problem at the ss sector
i have backed up viva pinata using XBC 2.5 and it worked ok
Any Ideas
Post by: Madmuhfuh on July 25, 2007, 07:29:00 AM
The drive is a SATA SATS-H353A flashed with the SH-D163A version of kreon 0.80 running on a via8237 rev A2 (according to bios) chipset. Latest drivers, bios, firmwares on everything.
Schrom and wxripper cant see the drive at all but i can rip xbox360 data using XDVDMulleter (for instance, just cause has $systemupdate, archives and FMV folder and default.xex and xbox360_file_order.log and i can rip them to hd) so the drive is defo working.
Any ideas?
-------------------------------------------------------------------------
Xbox Backup Creator v2.5 Build:0230 By Redline99
OS is Windows XP v5.1, Build 2600
Process running with Administrator privileges
The file system on drive C:\ is NTFS
Found ODD: TSSTcorp DVD-ROM SH-D163A SB00 at [G]
Additional Info: XB360 KREON V0.80
Found ODD: LITE-ON DVDRW LH-20A1S 9L08 at [H]
Additional Info: 2007/06/20 17:07
Nero v7.5.9.0
ImgBurn 2.3.2.0 is available
ImgBurn - The Ultimate Image Burner! by LIGHTNING UK!
Getting media info [G]
Media Type: DVD-ROM
Bytes Used: 7.05 GB (7,572,881,408 bytes)
------------------------------------------------------------------------
Post by: Madmuhfuh on July 26, 2007, 02:30:00 PM
Redline99 - if you want to try and address this problem ill give you whatever help you need man. Doesnt look like itll take much of a fix.
Post by: Astronutty on November 10, 2007, 12:47:00 AM
Post by: R0B on November 12, 2007, 02:57:00 PM
That should read the full game at 7GB. I have to do this for all my games I backup using XBC 2.5
Post by: edrock200 on November 23, 2007, 02:15:00 PM
Also, I did downgrade to stock firmware before upgrading to 1.0 as it was running .8 before. Any ideas? The flasher won't let me downgrade it back to .8.
Post by: edrock200 on November 23, 2007, 03:02:00 PM
Post by: ozzy_paul on July 11, 2008, 09:53:00 AM
Thanks for posting the file Redline99. Much appreciated.