xboxscene.org forums

Xbox360 Forums => Xbox360 Software Forums => General Software Discussion => Topic started by: Stubberzz on August 16, 2010, 09:46:00 PM

Title: Freeboot And Dashlaunch Help!
Post by: Stubberzz on August 16, 2010, 09:46:00 PM
Hey guys i am having a few problems with my Jtag 360 it is a Zephyr with freeboot 0.32 made with toolbox so dashlaunch 1.0 is included.Now the problems i am having are, every time i boot my Xbox it will return it initial setup e.g chose your country ect., Dashlaunch will not start freestyle dash and the ping limit patch does not show up. can anyone shed some light on my problems?
Title: Freeboot And Dashlaunch Help!
Post by: ravendrow on August 16, 2010, 10:25:00 PM
did you install the launch.xex using the flash installer? i know on my zephyr every time i get an e79 at boot i have to reinstall the stupid file into flash
Title: Freeboot And Dashlaunch Help!
Post by: jaygriggs on August 19, 2010, 11:06:00 PM
I have an issue getting dashlaunch to work too sad.gif
I bought a banned jtag xenon that had xbr on it
I bought a kv and created my freeboot image with  freeboot toolbox maker 2.4 r3
Everything booted up fine no issues with the system
I know it took because it shows 9199 in system settings plus its unbanned
I read a few tuts and tried to get autolaunch up and running
Im using the flash installer
I assume you just make the ini. point to it and it'll work but for whatever reason I can't get it to go
Any help would be appreciated love.gif
Title: Freeboot And Dashlaunch Help!
Post by: jaygriggs on August 20, 2010, 07:48:00 AM
QUOTE(inspuration @ Aug 20 2010, 09:35 AM) View Post

I believe you have to flash launch.xex and launch.ini to the nand using the software that comes with dashlaunch. You can get this from the usual places.

I've done that but everytime I reboot it goes to NXE
Title: Freeboot And Dashlaunch Help!
Post by: jaygriggs on August 20, 2010, 09:35:00 AM
Got it biggrin.gif
Had to change /freestyle/freestyle.xex
to //freestyle/default.xex  

sometimes I miss the simple things, hopefully this helps someone
Title: Freeboot And Dashlaunch Help!
Post by: sm32 on August 21, 2010, 01:55:00 AM
hate to hijack but i have a similar problem. miine goes to FSD 50% of the time and NXE 50% of the time. i can't figure out why?

it always loads up FSD when first turned on. it also always loads up FSD when BUT_X is held. similarly Xexmenu always loads up when LB is pushed (both are configured as so in my ini file). BUT FSD is defined exactly the same way with BUT_X as it is with Default but there's still the issue of not always going to FSD with "default". ideas?