QUOTE(kawgomoo @ Apr 11 2009, 08:02 PM)
just flashed a drive on a box that was already hurtin.. dead gpu.
hitachi 0079fl drive.
tdk media (cdr)
slax 2.1
image.cue {wav}
onboard via sata controller
360 powering drive.
followed podgers tut to the T, everything went just like it said. flashed the drive no problems.
reboot the drive...bricked. cant get back into mode b, windows wont recognize it.
so my question is, why did it get bricked? is the firmware in fwtoolbox useless?
in the past i have have trouble using programs like slayer {xbox1} i always had better results dumping a premade bin instead of using some all in one prog.
anyway to unbrick it? dont really care about the drive.
this was a junk tester box, but i need to know why the flash went bad or the drive is bricked before i try it on another "real" 360.
can anyone help on this?
fwtoolbox 4.8 is old but 4.6 older, its really worth trying to get jungleflasher working , the trouble with the 79 there are four different versions of firmware depending where the key is held, jf is just a better application than toolbox ,determining your firmware where as toolbox relies on flashing differences. When its working correctly jungleflasher it works like a charm ,all drives.