xboxscene.org forums

Xbox360 Forums => Xbox360 Hardware Forums => Xbox360 General / Hardware Chat => Topic started by: Skeemask on December 04, 2006, 02:31:00 PM

Title: Ms28 Bricked By Flash Or....
Post by: Skeemask on December 04, 2006, 02:31:00 PM

Hi guys,

I got a problem of wich i hope someone can help with or advise me...

Here,s what happend:

I got a brand new Ms28 and connected it to my Via6421 card and connectivity kit V2 to pull out the original firmware wich worked 100%. After doing this i made Xtreme 4.2b and flashed it back with 100% sucsess. When i turned on the 360 i noticed i had an eject tray error and even worse the middle light kept flashing inside the ring wich i know is the same error when there is no drive connected! So i hooked it back up to my pc and tryed to flash the orig.bin back wich also went 100% but after hooking the drive up agian.. Still same error

I looked At the orig.bin in hexworkshop and it seems to be fine and includes everything it should so i dont think my orig.bin is corrupted but just to be sure i downloaded a new ms28 from devilmods and added my key to it, flashed it back with 100% but still same error after connecting but now the drive does not even eject or seem to spin up like it previously did and after i wanted to hook it back up to my drive up to my pc agian Mtkflash gave me a status code 00 should be 70 so somehow it does not seem to connect to neither xbox or pc anymore  (IMG:style_emoticons/default/sad.gif)

I tested the drive on 2 different motherboards and they both give me the same problem so i know its the drive (tested it still did ejecting, before i flashed it with the downloaded ms28 and made it totally die..)

Is there any way possible to bring my ms28 back to life?

Any help is really much apreciated!
Thnx in advance

This post has been edited by Skeemask: Dec 4 2006, 10:32 PM

Title: Ms28 Bricked By Flash Or....
Post by: smitty2003 on December 04, 2006, 02:58:00 PM

the "should be 70 error" is a timing error.

Does it still eject when connected to the pc using th conncetivity kit?

are you sure your using MS28 firmware? or are you sure it is a MS28?

Other then that i have no clue what you did man
sorry (IMG:style_emoticons/default/sad.gif)