Post by: cvec7 on August 21, 2006, 12:11:00 AM
I even tried to get the ring of light to come on by creating errors....nothing. I tried the 'learn' function or whatever for the wireless controllers and nothing whatsoever on the ring of light will come on. I also checked and made sure that the power was plugged in properly and all the way.
Now, I'm thinking that I just need a new ring of light/RF PCB... however, would that make sense if the RF media remote still works? Or is it possible that only part of the board broke?
Now, I have no problem opening up the 360 and am technically inclined to do so (A+ certified actually). And I can get the ring of light/RF PCB off ebay for $25 and replace it myself. However, if I open it up and break the seal, MS will not even touch it even though it's an out of warranty repair for $130 (actually, more like $180 with shipping from alaska). So I'm worried that what if I open it up and it turns out that it's something more severe than the ROL/RF PCB that will cost more than the $180??? Or, if soldering needs to be done, I will not do it...I have always been horrible at soldering, especially on something like this...
So, I guess my main questions are:
Do I need a new ROL/RF PCB?
How is the ROL/RF PCB connected?
Should I open it up and risk a $180+ repair cost?
Thank you very much in advance!
O btw, it fell bottom first (opposite end of hdd)
This post has been edited by cvec7: Aug 21 2006, 07:24 AM
Post by: xboxexpert on August 21, 2006, 12:50:00 AM
Quite Possibly.
How is the ROL/RF PCB connected?
Three Screws and a simple USB Like connector. Its not a USB but I'm just using that as an example. If you want pictures I'll post em tomorrow.
Should I open it up and risk a $180+ repair cost?
Thats completely up to you and you alone. Dont take advice of users on this subject matter. Some will say do it your self others will say send to MS but in the end you will have to decide if you can and are able to fix it yourself. If might not be the ROL board...
-xboxexpert
Post by: cvec7 on August 21, 2006, 12:53:00 AM
I think I'll call MS back tommorrow and see if that $130 covers the parts needed (which I doubt)....and if it doesn't I think I'll work on it myself...
Post by: cvec7 on August 21, 2006, 12:02:00 PM
I do not have a usb controller to test it with, so I plugged in a flash drive w/ some songs on it, and plugged it into the front usb ports and all was fine.
I still am pretty sure it's the ROL/RF PCB that is my problem...however, since the RF function still works (I was able to test out the media remote) that should mean that the connection to the motherboard is fine, correct? So, thus, the motherboard should be fine.... or, is the connection from the PCB to the mobo wired to where a few wires control the RF and a few control the ROL? (to where it's possible that part of the connector on the mobo broke? (I've had this happen on a laptop of mine where only really, really basic pc cards will even recieve power from the pc card slot)
Post by: IAmCanadian on August 21, 2006, 01:18:00 PM
QUOTE(cvec7 @ Aug 21 2006, 11:33 AM) 
Ok, I called MS and they said that the $130 repair fee covers all parts and shipping back to me. But shipping to them is going to be around $40.
I do not have a usb controller to test it with, so I plugged in a flash drive w/ some songs on it, and plugged it into the front usb ports and all was fine.
I still am pretty sure it's the ROL/RF PCB that is my problem...however, since the RF function still works (I was able to test out the media remote) that should mean that the connection to the motherboard is fine, correct? So, thus, the motherboard should be fine.... or, is the connection from the PCB to the mobo wired to where a few wires control the RF and a few control the ROL? (to where it's possible that part of the connector on the mobo broke? (I've had this happen on a laptop of mine where only really, really basic pc cards will even recieve power from the pc card slot)
dude, the media remote is I/R, not R/F.
Post by: xboxexpert on August 21, 2006, 01:22:00 PM
Thats why that works and controllers dont.
Post by: cvec7 on August 21, 2006, 06:17:00 PM
Ok, thanks for reminding me, that certainly clears some stuff up.
Post by: G0t M4xx 21 on August 21, 2006, 08:34:00 PM
Worst case scenario i can think of is that the connector on the motherboard is damaged (mashed/broken off, etc)
Post by: IAmCanadian on August 22, 2006, 12:16:00 PM
Post by: cvec7 on August 24, 2006, 05:28:00 PM
Currently, my dad is trying to see if his store (BX/PX) will take it back like they did when our 1.5 yr. old PS2 stopped reading discs a few years ago....
This post has been edited by cvec7: Aug 25 2006, 12:28 AM
Post by: sicknasty413 on August 25, 2006, 11:27:00 AM
But my personal opinion: F'd up R/F board. Id say just buy another one off of say.. ebay (you could try the 360 b/s/t as well). Then replace it yourself. (uber uber simple) Then say it doesnt work.. ok, so what? You spent like 10 dollars at most? (i have no idea how much r/f boards are going for these days, so dont quote me on that)
good luck though.