Post by: LordX on June 24, 2006, 04:42:00 PM
game is just stack !
what is a problem ? Overheating ?
it happens in all games , after 5-10min .
I not have any Error Codes and Ring is green .
Post by: bigjimmy on June 24, 2006, 10:18:00 PM
Unless if youve opened it up and voided your warrenty, you should just remove the foil from the GPU heatsink and put some Arctic Silver 5 on there.
Post by: d13w93 on June 25, 2006, 01:12:00 AM
Post by: LordX on June 25, 2006, 03:02:00 AM
and yes I not have warranty...
Post by: d13w93 on June 25, 2006, 04:33:00 AM
Post by: LordX on June 25, 2006, 10:41:00 AM
QUOTE
overheating which has damaged the GPU
but 1st 5min it works fine ...
I am going to open it and check the GPU ...
anyone fixed this problem before ??
Post by: d13w93 on June 25, 2006, 11:54:00 AM
Post by: LordX on June 25, 2006, 12:52:00 PM
Post by: sidewinder33 on June 25, 2006, 02:24:00 PM
Post by: LordX on June 25, 2006, 03:06:00 PM
so they wont fix it just need some one who know the problem and fixed it before ...
Post by: BCfosheezy on June 26, 2006, 09:11:00 AM
QUOTE(LordX @ Jun 25 2006, 04:13 PM) 
console is moded and hacked so they wont fix it
just need some one who know the problem and fixed it before ...
so they wont fix it just need some one who know the problem and fixed it before ...
Quite a few people. Those with memory overheating, obviously cooling the GPU only helps marginally. Here is a thread with the answers you were looking for...in the same forums just a few topics up. Not that hard to find. http://forums.xbox-s...howtopic=522438
Post by: LordX on June 27, 2006, 03:29:00 PM
they are working on some 1000rpm .
normaly when GPU or CPU Overheating fan working faster , but not here , same speed all the time !
looks like speed control is not working, any one know something about this problem ?
Post by: neoed30 on June 28, 2006, 05:06:00 AM
QUOTE(LordX @ Jun 27 2006, 05:36 PM) 
looks like my problem is in the Fans .
they are working on some 1000rpm .
normaly when GPU or CPU Overheating fan working faster , but not here , same speed all the time !
looks like speed control is not working, any one know something about this problem ? (IMG:style_emoticons/default/huh.gif)
Mine does the same thing. I've been looking for the fan speed controller as well. I did find 2 different spots on the board that cause the fans to speed up if you place your finger on either one of them for a few seconds while the system is on. One spot is in front of the GPU fan. ::: If you hold your finger on that one spot long enough the fans will speed up very quickly and then 2 red lights will flash and the system will shut down. The fans will still be running for a second or two and continue flashing the 2 red lights. Once the fans stop on their own you can then hit the power button to turn off the flashing lights. The other spot on the board is down in front of Memory Slot A right next to the little yellow ring with the wire wrapped around it. The spot to place your finger on is right underneath that on the bottomside of the board. It is just a little spot though. That spot will speed the fans up but will not cause any flashing lights or anything. Also I noticed that for me if I turn the 360 on from a cold start and it will not boot and just flashes 3 red lights. If I leave it on and flashing for about 20 to 45 minutes then restart it. It will sometimes boot but it will crash shortly afterwards. Weird.
Post by: LordX on June 28, 2006, 03:53:00 PM
guys anyone have some info about it ?
Post by: SuDDeN on June 28, 2006, 05:58:00 PM
Post by: frenzy987 on June 28, 2006, 09:48:00 PM
No red lights but freezes after very little use, usually with graphical glitches on the screen. This happens with or without the h.d.d.. Machine is out of warranty and MS want $200 AUS to fix it, plus I have to ship it to them at a cost to me. Funny that they can quote and charge me this amount before they even know what is wrong with it.
Post by: neoed30 on June 29, 2006, 03:30:00 AM
QUOTE(frenzy987 @ Jun 28 2006, 11:19 PM)
My NTSC 360 has just developed the same problem after 6 months of use.
No red lights but freezes after very little use, usually with graphical glitches on the screen. This happens with or without the h.d.d.. Machine is out of warranty and MS want $200 AUS to fix it, plus I have to ship it to them at a cost to me. Funny that they can quote and charge me this amount before they even know what is wrong with it.
Oh, I'm sure they already know what's wrong with it. If it hasn't flashed any lights at you yet, give it time it will. Also, the money they are charging to fix the 360 is some of the money they lost when building it and selling it to the consumer for less than what it actually cost them to build it. That's why for alot of us it worked great until after the warranty expired. Knowing that alot of us would not purchase the extended warranty. Gotta make that cash back somehow. Right?
QUOTE(SuDDeN @ Jun 28 2006, 07:29 PM)
Do the 12v mod. This way you know it's working at the highest setting....
Let's just say it is the fan speed control. If we did the 12v fan mod and made the fans go at that high setting. Wouldn't the motherboard still throw us the flashing lights because it senses the bad fan speed controller and not the actual speed the fans are running at? Just a thought.
Post by: LordX on July 02, 2006, 03:44:00 AM
QUOTE(SuDDeN @ Jun 29 2006, 01:29 AM)
Do the 12v mod. This way you know it's working at the highest setting....
yes possible , but I like to fix it
. anyone have some diagram or anything about it ?
Post by: LordX on July 06, 2006, 11:46:00 AM
today I forget to turn it on
it worked some 5min , and then same problem with gfx like in the 1st page.
I turn it off , wait some 15min and turn it on I have no screen . and ring was green , after some 10 trys I get Red ring , and my error is 0110 ( not on screen I use ring to detect my error ).
so anyone want this board ?
I have a drive key for it .
Post by: jtom617 on July 06, 2006, 11:54:00 AM
QUOTE(LordX @ Jul 6 2006, 06:53 PM)
I Played useing a big fan to cool it ...
today I forget to turn it on
it worked some 5min , and then same problem with gfx like in the 1st page.
I turn it off , wait some 15min and turn it on I have no screen . and ring was green , after some 10 trys I get Red ring , and my error is 0110 ( not on screen I use ring to detect my error ).
so anyone want this board ?
I have a drive key for it .YGPM
Post by: unspoiledpuma on July 13, 2006, 08:58:00 AM
-remove the heatsink on the gpu
-start the 360
-you gonna get a 2 red light blinking if u get a 3 red light blinking wait a little bit u gonna get a 2 red lights (overheating)
-turn off the 360
-replace the heatsink
-turn on the 360
-you should now have the 360 boot logo
-if it doesnt work try to a litlle pression on the heatsink and powerup the 360