Post by: sosotiit on December 21, 2008, 06:50:00 PM
Tutorial On Making Backup With Xbc / Imgburn
RIPPING
1-Open XBC ,
2-Select your ripping drive like Kreon or Samsung/Benq drive
3-Place your game in the drive,
4-Press Start (with Complete Backup" selected),
BURNING WITH IMGBURN called by XBC
1-Open XBCr* , select IMGBURN as burning engine
2-Select your burning drive ,
3-Place a blank DVD+R DL the drive,
4-Press Start , select the .ISO file you have just created
5-Imgburn will start
Complete tutorial
soso
This post has been edited by sosotiit: Dec 22 2008, 03:35 AM
Post by: ashegam on December 29, 2008, 03:57:00 PM
Also how can you find out the name of the game burnt on a dvd, with out obviously playing it in an xbox.
Post by: sosotiit on December 29, 2008, 08:42:00 PM
if you want to check your burn in order to see if everything is there, put it is XBC and do a stealth check using the Drive Tools tab, or a full validate of the burn against the image in How to verify a burn
soso
Post by: ashegam on December 29, 2008, 08:15:00 PM
Post by: nidx on February 09, 2009, 10:31:00 PM
Post by: Arcriku on March 14, 2009, 07:38:00 PM
This post has been edited by Arcriku: Mar 15 2009, 02:39 AM
Post by: DeathBringer007 on March 20, 2009, 11:43:00 PM
Post by: BlackWar on March 22, 2009, 03:30:00 PM
2: to play backup games (from the disks you own) you have to have the fw flashed on the 360's dvd-rom drive in order for it to read them properly. Just like above, the info is all here on these forums, search for it.
3: From my experiences, XBC 2.8 and imgburn (latest as of this writing) work just fine in win7 (using 64bit verson here, and assuming that you run them with admin privliges). Granted each users mileage may vary. Please keep in mind tho, I have yet to update my benq drive to the latest fw (still running 1.41) so their *might* be issues with how it works with the new 1.51+ fw's.
This post has been edited by BlackWar: Mar 22 2009, 10:35 PM
Post by: kaneda_77 on April 03, 2009, 11:26:00 AM
Instead I used the samsung ts-h943 drive with the xtreme 0800 firmware. It's great for backing up my 360 games. However, xbox 1 games are not working at all. It freezes/stops at 5.46% on every one and gives me the can not open partition error.
I tried tweaking the settings(drive specific, xbox1), but each time it's a no go. Any recommendations or tips?
Post by: lefos on April 21, 2009, 08:52:00 AM
I put the disc in my benq 0800 flashed drive, window sees it, and xbc doesn't.
When I put the game (this is an original disc) into my regular drive, xbc can see it, but it will not let me rip because it only sees the video part, as 3.52MB or w./e.
What do I do to get XBC to recognize my drive? P.S. I currently have 5 cd drives recognized by my system, 3 read in xbc.
Post by: lefos on April 21, 2009, 10:27:00 AM
Post by: ledezma2003 on July 27, 2009, 03:45:00 PM
Post by: Circaflex on July 30, 2009, 11:25:00 AM
QUOTE(ledezma2003 @ Jul 27 2009, 10:45 PM) 
Hi i have the sh-D162D and kreon firmware 1.00 and it takes over an hour to rip any suggestions?
Mine takes <15minutes, so something isnt right.
Post by: The_Nightfly on September 15, 2009, 01:28:00 AM
I have a problem with ripping my xbox360games. I have a SH-D163D with Kreon V1.0 and it has worked some time ago. I used XBC und ripping was no problem at all.
I just tried to rip a new game and it XBC started to tip (128kb file was on my HDD) and then it stopped by doing nothing at all. No error message, nothing, just 0% and not i byte more.
What could that be? Anydvd is not running while I'm ripping.
Does someone has an idea?
Does the SH Drive have to be Master or Slave?
Thx
Post by: d9988 on October 21, 2009, 06:00:00 PM
QUOTE
5-When completed, you will get a 7 651 848KB ISO ( or 7.29GB) or 7,651,262KB depending on the x360 games. If you do not activate the Splitvid then the files will be 7,395,392KB or 7.05GB. The .iso for Xbox1 will be 7,258,816KB (or 6.92GB) without splitvid.
It's been a while since I used XBC (early this year). My drive is the SH-D162C with 1.0 kreon firmware. I did update XBC to v2.9 build 0306 yesterday, although I did not update the drive firmware since it already was at 1.0.
The last game I did rip is Ninja Gaiden 2 (I think that was done with XBC 2.7). It came out as 7.05 GB/7,395,392KB which matches one of the sizes above.
The games I just ripped, Madden 2010 and NCAA 2010 (from originals) come out with different sizes. they are both 7.29 GB/7,654,876KB, which is a little off from the above noted size.
Do newer games have different sizes or is this not normal??
Post by: PhoneyVirus on October 24, 2009, 10:27:00 PM
ABGX and Mulleter DB: No discussion on Online Database portion of such tools.
* These tools are of no use if you did the backup yourself, you know that all these stealth components match together because you extracted them from the same original
* You need a drive (kreon or X360) that can extract the SS, and as a result you can just do a "complete Backup" right from the start, and no need to inject anything
* Using these tools to change stealth component is the equivalent to downloading stealth file which against our rules
After I do a "complete Backup" with my BenQ VAD6038, extract the SS and no need to inject anything like ABGX or Mulleter, then burn them to a disc can I go online just like the Original and if so OMG
now I got all my games full with something lucky I never Burned them yet Thank you if this is right. *** NOTE ***
This build of XBC does not support older Xtreme ripping firmwares
(Kreon drives are still supported though)
Stealth Checking verbiage/intent removed, XBC only does limited checking.
Post by: PhoneyVirus on December 24, 2009, 03:02:00 PM
QUOTE(grandpa69 @ Dec 24 2009, 05:31 PM)
This is my first time doing a back-up, I am using XBC v2.9. Under write I select complete back-up and hit start. When I went to burn with XBC the SS passes PFI validation failed mismatching DMI passes and everything else did not test and stealth fails. So I went to verify with ABGX and everything passes so what is right, XBC or ABGX? Will it be safe for live?
Forget about Live use Schtrom360 Xtract S360X v4.1 make two copy's from the Original verify with S360X or ABGX360 but do so offline Read my Guide about verifying with ABGX360. Also burn with Imgburn Read Schtrom360 Xtract Guide at the end of the tutorial about using Imgburn alone and not XBCr v2.9.0.306.
Pinned:: **HOW TO CREATE WORKING 360 BACKUPS
Post by: PhoneyVirus on December 24, 2009, 04:15:00 PM
QUOTE(grandpa69 @ Dec 24 2009, 06:27 PM)
So if it passes with ABGX360 it should be good including playing on live right? Any idea why stealth would fail with XBC? I do burn with Imgburn and wiill try S360X v4.1.Thanks
I just got done answering the same Question lol
Make two copy's from the Originals verify them with S360X or ABGX360 but do so offline!
Why ?
Because of there DB database that holes info from everyone might be wrong PFI DMI etc. There is no reason to use (Verify if Stealth Passes under the Options Tab) also read the info they have provided by hovering your mouse over the blue dot beside (Verify if Stealth Passes under the Options Tab) and Read my Guide everything you need to know is there Plus more hope this helps
Pinned:: **HOW TO CREATE WORKING 360 BACKUPS
Forget about online with any version of FW and if you got a Liteon drive iX v1.6 and looking to play Wave 4 or 5 games your going to need Activate iso witch is the only way for now, that's if you play Wave 4 games Activate iso One Shot Boot disc hope this help.
BenQ and Samsung with iX v1.61 can boot all Wave 4 games and for the Liteon drive I think this is how it goes you can't use no other version of FW why because there was never a version created for the Liteon besides iX v1.6 for more info on this just look through Xbins server.
Post by: showstopper on November 15, 2011, 07:08:00 AM
QUOTE(xcapeartist @ Nov 15 2011, 01:31 PM)
im having a problem with imgburn, getting a I/O error while its verifying sectors.
Probably your media. What is that disk memorex?
Post by: xcapeartist on November 15, 2011, 11:41:00 AM
QUOTE(showstopper @ Nov 15 2011, 09:08 AM)
Probably your media. What is that disk memorex?
Yes memorex it is, same spindle I used to burn the last 20 or so games before the may update unflashed my drive. Now I'm reflashed and trying to caught up on this new burning process my mod guy is telling me about.
Got Lt2.0
Lite On iHAS424-98B
iXtreme burner max
Followed the tut to flash the burner
Folder GL1A
tried imgburn with-
calculated layerbreak @ 2.4 with opc off
Calculated layerbreak @ 4x with opc on
User specified 1913760 @2.4 with opc off
(was told the layerbreak was set automatically now but ran the finished disc through abgx360 and it said "layerbreak for this dvd was reported as 2133520 (1913760 expected) so I tryed it with that one)