xboxscene.org forums

Xbox360 Forums => Xbox360 Hardware Forums => Xbox360 Backup Forum - DVD DL help / ISO Building => Topic started by: chrisvenn on February 04, 2020, 07:50:00 AM

Title: Write Error Please Help
Post by: chrisvenn on February 04, 2020, 07:50:00 AM
Hi guys im quite new to this and have been registered here for awhile but learning by reading up on the guides and searching through the forums the best i can. I thought i had managed to grasp it all but got a write error on my 1st burn so thought i best ask for a little bit of help if you dont mind?

I know i will look like a noob asking questions but please believe me when i say i have searched and wished i could find the answer myself.

Anyways ive ripped my original copy of MOHA using my Samsung DVD drive with Kreon V0.81 firmware to my harddrive using XBox backup Creator 2.6 following your back up guide (http://forums.xbox-scene.com/index.php?showtopic=588763)

But when i come to write it with imgburn i get this write error see link below:

(IMG:http://stashbox.org/43388/write%20error.jpg)

the DVD burner im using is LITE-On DVDRW SOHW-1633S BSOC

Ive set imgburn up so its set the bitsetting up on my Lite on drive to DVD-ROM

Im also using Verbatim DVD+R DL media

Oh and i left splitvid ticked on xbox backup creator is this wise to leave this on?

Hope thats all the info you guys need?

Has anyone got any idea whats going wrong?

Thanks alot

This post has been edited by chrisvenn: Today, 03:51 PM
Title: Write Error Please Help
Post by: HellBoyBell on February 04, 2020, 08:00:00 AM
If your using good media which you are, and i can see your burning at 2x which is good, i would then guess it to be the DVD burner at fault. Check all connections and try again, if that dont work then id think about investing in another burner.
Title: Write Error Please Help
Post by: chrisvenn on February 04, 2020, 08:14:00 AM
Thanks for the fast reply, yeah im burning at 2x speed.

Ive also got another burner i could try a HP dvd writer dvd630.

otherwise i will have to get a Pioneer 111 or 112 but was trying to get by without buying another burner as already got 2 lol

This post has been edited by chrisvenn: Today, 04:16 PM
Title: Write Error Please Help
Post by: HellBoyBell on February 04, 2020, 08:26:00 AM
Personally, and this is just my opinion, but im not much of a fan of the Pioneer burners, i had a 111D and i got about 25 or 30 burns out of it before it died. NEC on the other hand seem to last alot longer, im currently using an NEC Optiarc AD-7170s SATA burner, and its been burning very well for about 6 months now, and for £23 its a bargain.
Title: Write Error Please Help
Post by: chrisvenn on February 04, 2020, 08:36:00 AM
Where abouts did u get that NEC burner from then? Any links?

Title: Write Error Please Help
Post by: HellBoyBell on October 12, 2007, 09:34:00 AM
Have a look HERE for one in the UK.

I got mine from a shop near me which is really cheap (Laindon, Essex), i get my DL disks there aswell, 10 Mirror DL disks for £7, cant beat that can you
Title: Write Error Please Help
Post by: chrisvenn on February 04, 2020, 09:36:00 AM
Thanks for the link.

Anyone else have any other idea what might be wrong or worth me trying before i buy another burner?
Title: Write Error Please Help
Post by: sosotiit on October 12, 2007, 07:13:00 PM
yes, your burner  tongue.gif . liteon 1633 was amongst the first attempt at DVD DL (only 2.4x speed) and is far from optimal for DL burning.

I am the opposite of previous poster (sorry), had bad experience with nec (in fact a sony made by nec) but pioneer and liteon gave me great performance (still have a A05 in use !!!). I would vote pioneer 112 and if sata is required the Liteon,

That said, like anything else if you get unlucky and get a bad unit (nec, pioneer)...

soso
Title: Write Error Please Help
Post by: chrisvenn on October 15, 2007, 02:59:00 AM
Can anyone answer if the below link is a drive that will work for back-ups before i buy it?

http://www.ebuyer.com/product/125215

I think it is as its a pioneer but i wanted to check so as not to waste any money
Title: Write Error Please Help
Post by: Edem on October 15, 2007, 03:58:00 AM
I have the same problem with pioneer 111d (imgburn)
Title: Write Error Please Help
Post by: chrisvenn on October 15, 2007, 06:24:00 AM
So it might not be my burner then if u have a pioneer and get the same write error with imgburn.

Has any1 else anything i should try before changing my burner?
(also if i have to get a pioneer is the link a few posts above one that will burn them?)

Edem: Have u made back-ups before or is this your 1st try aswell? If it is there might be somthing we both are doing wrong, but what that is i dont know. Would it be anything to do with splitvid?
Title: Write Error Please Help
Post by: chrisvenn on October 16, 2007, 02:07:00 AM
QUOTE(sosotiit @ Oct 13 2007, 02:49 AM) View Post

yes, your burner  tongue.gif . liteon 1633 was amongst the first attempt at DVD DL (only 2.4x speed) and is far from optimal for DL burning.

soso

Ive had another thought if i update the firmware on the liteon (is that possible) will it make it any better?
Title: Write Error Please Help
Post by: jesterrace777 on October 16, 2007, 11:15:00 AM
It definitely could make a difference so I would give it a shot.  On a side note, another vote for the Pioneer here.
Title: Write Error Please Help
Post by: chrisvenn on October 16, 2007, 12:51:00 PM
QUOTE(jesterrace777 @ Oct 16 2007, 06:51 PM) View Post

It definitely could make a difference so I would give it a shot.  On a side note, another vote for the Pioneer here.


Stupid question where would i find liteon firmware to update my drive has any1 any links or is it a case of just google seaching? (The reason im asking is im at work at the mo so cant go searching and downloading things so if there was a link i could click it when home)

Nevermind found the liton site with the firmware update for my drive

http://www.liteonit....o...&Itemid=154
Title: Write Error Please Help
Post by: chrisvenn on October 17, 2007, 01:55:00 AM
I know i keep adding to my own thread but found out more info.

My verbatim are made in India and not Singapore have any1 confirmed if these are as good?
Title: Write Error Please Help
Post by: chrisvenn on October 17, 2007, 03:01:00 AM
UPDATE PLEASE HELP WITH NEW ERROR

Right ive updated my liteon firmware and it burn the disc all the way upto 100% then came up with this Finalise disc error

(IMG:http://stashbox.org/44469/2nd%20error.jpg)

I clicked retry and it seemed to finalise the disc it then ejected the dvd and gave this error

(IMG:http://stashbox.org/44470/3rd%20error.jpg)

I tried the disc in my 360 and it doesnt work it just shows open tray

Any more ideas guys?

This post has been edited by chrisvenn: Oct 17 2007, 10:02 AM
Title: Write Error Please Help
Post by: chrisvenn on October 17, 2007, 10:06:00 AM
Tried my other burner the HP 630c and i get another write error

IPB Image

So thats 3 discs wasted hmm

Any1 got any other ideas before i get a new burner?