xboxscene.org forums

Xbox360 Forums => Xbox360 Hardware Forums => Xbox360 Backup Forum - DVD DL help / ISO Building => Topic started by: sosotiit on May 15, 2007, 12:38:00 PM

Title: problem getting drive detected
Post by: sosotiit on May 15, 2007, 12:38:00 PM

what drive samsung ms25/ms28? you must first run the 0800 disc in your drive for like 20sec

also connect to a sata port on your mb (not the pci card if you can)

-soso

Title: problem getting drive detected
Post by: sosotiit on May 15, 2007, 01:56:00 PM

Are you connected to your motherboard SATA (not the pci card sata), if you can try that .

Title: problem getting drive detected
Post by: sosotiit on May 15, 2007, 04:09:00 PM

try updating your pc bios, drivers and winupdates.

for your card, is it a 6421? which version of drivers
if so try the 5.2 drivers on viarena site, some of the drivers after that were causing problems

-soso

Title: problem getting drive detected
Post by: appleseed85 on May 16, 2007, 10:26:00 PM

anyone else have any ideas?

should I use xtreme0800.bin instead of activate.iso?
should I roll back my Via driver?
should I reflash my ms28 with a 52b,c,or d?
Is there a setting i need to change somewhere?

any suggestions would be much appreciated!