Post by: jesterrace777 on September 08, 2006, 12:17:00 PM
Post by: ILLusions0fGrander on September 08, 2006, 12:19:00 PM
111d+verbs+samsung+old fw = perfect for me
Post by: Braveheart1980 on September 09, 2006, 04:14:00 PM
After several hours i could easily change origina discs with no problem!
Any ideas?
Pot tweaking is my only option?
Post by: Braveheart1980 on September 10, 2006, 02:01:00 AM
Post by: Braveheart1980 on September 13, 2006, 04:11:00 PM
I then restarted my xbox360 AND MY PROBLEM STILL PERSISTS!!
UNBELIEVABLE!
My only hope is pot tweaking,which ain't a good idea after all.....
Any,I repeat,any help would be greatly appreciated!
Post by: Bush-Is-My-Hero on September 13, 2006, 07:32:00 PM
you should do that and replace the goo with some better thermal compound under the heatsinks ,
you could also seal the gap between the shroud and the cpu heatsink with some electrical tape or something for better air path through the cpu heatsink
Post by: Braveheart1980 on September 13, 2006, 11:50:00 PM
QUOTE(Bush-Is-My-Hero @ Sep 14 2006, 04:39 AM) 
pot tweak is fairly easy to do , you just need to understand what you are doing ,
you should do that and replace the goo with some better thermal compound under the heatsinks ,
you could also seal the gap between the shroud and the cpu heatsink with some electrical tape or something for better air path through the cpu heatsink
Yes it is easy,I understand that
But how safe could it be?
I will pot tweak my drive if i have no other option left..
Post by: Braveheart1980 on September 14, 2006, 05:20:00 AM
I opened up(again!) my 360 and measured my pot. It was 4,2 kΩ !(quite high indeed)
Since the normal values are between 4,2 and 3,4 kΩ , I've adjusted my pot to a quite normal value , which is 3,52 kΩ
Now everything plays nice and smooth even after 2+ hours of gaming!
I'd like ,once more, to thank you all , for your help!