xboxscene.org forums

Xbox360 Forums => Xbox360 Hardware Forums => Xbox360 Audio/Video Technical => Topic started by: Dark Mod on July 19, 2010, 07:25:00 AM

Title: After Soldering Vga Port To The Motherboard,not Seems To Be Responding
Post by: Dark Mod on July 19, 2010, 07:25:00 AM
it could be miswired somehow....see if you can find the proper diagram for the VGA cable
Title: After Soldering Vga Port To The Motherboard,not Seems To Be Responding
Post by: RRODXbox on July 25, 2010, 08:44:00 AM
I did this mod a while ago with that guide and did the twisted pairs as advised, it appears you have just done them straight?
Title: After Soldering Vga Port To The Motherboard,not Seems To Be Responding
Post by: JuliVerHJ on July 26, 2010, 03:15:00 PM
Nope still the same thing,i twist them up.
Title: After Soldering Vga Port To The Motherboard,not Seems To Be Responding
Post by: JuliVerHJ on July 27, 2010, 02:15:00 PM
hey guys,some one told me that i need to check with multi meter that theres actually some Ampers flowing around the wires,so what is the best way to do it?,it just hard to work without fans in the upwards side.
Title: After Soldering Vga Port To The Motherboard,not Seems To Be Responding
Post by: JuliVerHJ on August 06, 2010, 01:21:00 PM
Checked with multimeter for short circuit,but no there is no short circuit (i checked three times),but still no respond.i guess the wires is just not set correctly,right?.or is it because i tried too much times (like 5) and it seems to be a little burned...
Title: After Soldering Vga Port To The Motherboard,not Seems To Be Responding
Post by: bucko on August 07, 2010, 09:58:00 AM
don't hijack threads either =/, watching your video you suggest it could be because the cable is not VGA TO VGA I would try on a spare monitor or CRT at least.  You might just need to reset your VGA resolution using the controller..

http://support.microsoft.com/kb/911059
Title: After Soldering Vga Port To The Motherboard,not Seems To Be Responding
Post by: JuliVerHJ on August 08, 2010, 01:53:00 PM
Reseted the settings,still no go.
Title: After Soldering Vga Port To The Motherboard,not Seems To Be Responding
Post by: JuliVerHJ on August 08, 2010, 04:55:00 PM
No edit button here but i upload here a high resolution picture of my board,look at the legs of the video output they are a  bit burned up.this is because i did it like 10 times(and burned couple wire isolators).
Hope it will help you guys help me biggrin.gif

Link:
http://img337.images...us/f/006je.jpg/