xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical Onboard Bios / Kernel / Dashboard Forum => Topic started by: Dicko316 on July 29, 2012, 06:11:00 AM

Title: Issues Reading Nand Through Matrix Nand Flasher
Post by: Dicko316 on July 29, 2012, 06:11:00 AM

What model xbox are your trying to dump?

Is the light on the power brick Orange?

Have you tried connecting to the PC different ways?
eg unplug usb from pc, unplug xbox, plug in xbox, then plug in usb. Then try nand pro again.
or unplug both, then plug in usb, then plug in xbox. Then try again.

Have you tried different versions of nandpro eg version d or a?

Title: Issues Reading Nand Through Matrix Nand Flasher
Post by: deilzfcjk on August 18, 2012, 08:27:00 PM

heaven lord have mercy. Those wires are stripped way too much! We therefore cannot rule out user error due to hardware or software.

Softwre wise would be you installing incorect drivers. Hardware means anything with the way your wires are.

Title: Issues Reading Nand Through Matrix Nand Flasher
Post by: deilzfcjk on August 23, 2012, 02:46:00 PM

I can tell you for one, If the wires on the side of the matrix spi nand flasher are touching that heatsink you have it resting on. Then , it'll throw a whole bunch of read errors. it's shorting to the heatsink.