xboxscene.org forums

OG Xbox Forums => Software Forums => Xbox Bioses => Topic started by: charulo on March 09, 2005, 01:42:00 PM

Title: Flashing A 2.6
Post by: charulo on March 09, 2005, 01:42:00 PM
Can I flash a 2.6 chip with the x2 4983.06 bios?  Can I use the smae bioses that I used to flash a 2.3?
Title: Flashing A 2.6
Post by: bucko on March 09, 2005, 05:36:00 PM
depends what your xbox version is the 2.6 is going into.
Title: Flashing A 2.6
Post by: ThaCrip on March 09, 2005, 08:22:00 PM
either way i HIGHLY RECOMMEND a program called "FlashX v1.2" to update your bios's on a already working xbox... it works perfect and is simple to use.

X2.4983 = 1.0-1.5 xbox (u can use either bank for this bios)
Evox M8 for 1.6 xbox or Evox M8+ for 1.6b xbox ... bios MUST be on BANK2!

This post has been edited by ThaCrip: Mar 10 2005, 04:28 AM
Title: Flashing A 2.6
Post by: charulo on February 02, 2020, 11:19:00 PM
Do both bioses for the v1.6 or v1.6b need to be on bank 2?  If so, why?  Thanks for the feedback by the way.
Title: Flashing A 2.6
Post by: ThaCrip on March 14, 2005, 10:05:00 PM
wink.gif
Title: Flashing A 2.6
Post by: vgs.co.il on March 18, 2005, 06:09:00 AM
it doeasnt matter on which bank youput the m8 as long as it is in the right size !!
if you will try to put a 256k bios on a 512k bank you will be getting porblems!!! so make sure you creat the right size !
Title: Flashing A 2.6
Post by: ThaCrip on March 18, 2005, 10:17:00 PM
QUOTE(vgs.co.il @ Mar 18 2005, 07:15 AM)
it doeasnt matter on which bank youput the m8 as long as it is in the right size !!
Title: Flashing A 2.6
Post by: KeyMastur on March 18, 2005, 10:24:00 PM
a side note - when you flash a chip, it flashes from the beginning to the end. so it doesn't matter if you got the switch set to bank 2, if you only flash a 512 image it'll all be on bank 1.

basically to flash to bank 2, you must use a 1 mb image, so that it flashes until the end of bank 2.
Title: Flashing A 2.6
Post by: ThaCrip on March 19, 2005, 07:27:00 AM
QUOTE(KeyMastur @ Mar 18 2005, 11:30 PM)
a side note - when you flash a chip, it flashes from the beginning to the end. so it doesn't matter if you got the switch set to bank 2, if you only flash a 512 image it'll all be on bank 1.
Title: Flashing A 2.6
Post by: Fazered on March 19, 2005, 10:41:00 AM
QUOTE(ThaCrip @ Mar 19 2005, 05:23 AM)
for a Xecuter 2.6 modchip it DOES matter what BANK u put the bios on "if" u got a 1.6 or 1.6b xbox, for a 1.0-1.5 xbox it dont matter what BANK u put the bios on ... this is common knoledge, if u dont believe me go check teamxecuter.com forums out... even the admin (Xecuter) knows this.