xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: OggyUK on August 05, 2009, 01:25:00 PM

Title: .bin Files Lost For Liteon
Post by: OggyUK on August 05, 2009, 01:25:00 PM
If you read the samsung and spoof it into LiteOn iX

Erase

Flash

Powere cycle / half open tray

Dummy from iX

You'll have:

A LiteOn hacked, and your dummy.bin smile.gif
Title: .bin Files Lost For Liteon
Post by: HOMiE7 on August 05, 2009, 01:38:00 PM
Dump fw from Sammy and extract your unique dvd key, inquiry, identify and serial. If your serial is blank you can read all codes from stickers on original drive.
Title: .bin Files Lost For Liteon
Post by: OggyUK on August 05, 2009, 01:44:00 PM
Ok:

Unlock the drive (dont use sammy unlock, instead use VCC Trick or Half Open Tray and Intro.

Read the Samsung f/w

Open iX 1.6 for LiteOns

Spoof source to target.

Remove Samsung

Hook Up LiteOn

MTKFlash32 / LiteOn Erase

If good flash chip properties,

Write.

Power Cycle LiteOn

Set half open tray on LiteOn

DVDKey32 / Dummy from iX

This will give you your dummy.bin.

As above, if JF warns drive specific info is missing, you can rebuild from the labels on the drive.
Title: .bin Files Lost For Liteon
Post by: rolopuente on August 05, 2009, 03:39:00 PM
Does it change the fact that the iXtreme present on my sammy is 1.41? Can I still proceed with the above steps?
Title: .bin Files Lost For Liteon
Post by: OggyUK on August 05, 2009, 03:41:00 PM
Sammy never had 1.41, 1.4 however:

VCC Trick / Activate.ISO are your only unlock methods.
Title: .bin Files Lost For Liteon
Post by: saleem_hacks_360s on August 05, 2009, 03:49:00 PM
dosflash32 1.7 in windows unlocks samsung great and dumps them fine.

 dry.gif  

Title: .bin Files Lost For Liteon
Post by: OggyUK on August 05, 2009, 03:54:00 PM
Providing you have a VIA/Nforce controller, yes.

an ICH user cant unlock it with DosFlash alone.

QUOTE(rolopuente @ Aug 5 2009, 10:47 PM) View Post

Either way the above procedure it's doable then? Why you said "dont use sammy unlock"?
Thanks again!


Because its designed for stock MS28's only.

Again, for users that dont have VIA/Nforce chipsets.
Title: .bin Files Lost For Liteon
Post by: rolopuente on August 05, 2009, 05:25:00 PM
From what I've seen that is not an option, since I don't have dummy.bin to change the dvdkey to.
Am I correct? If not, can anyone confirm MrBucket101 approach?

Cheers,
Rolo

QUOTE(MrBucket101 @ Aug 6 2009, 12:22 AM) View Post

if you have the key written down, why not just type that into jungleflasher and spoof it to source instead of worrying about dumping the sammy again

Title: .bin Files Lost For Liteon
Post by: rolopuente on August 05, 2009, 05:37:00 PM
QUOTE(MrBucket101 @ Aug 6 2009, 12:29 AM) View Post

i could be wrong, it definitely wouldn't be the first time thats for sure

but since you don't have the dummy.bin from the liteon, why can't you just use a probe and get the needed files from it that way.

I'm not really seeing how the samsung fits into the big picture here. The only use I see for it is to get the original key from, but you already have that written down and saved.

Title: .bin Files Lost For Liteon
Post by: MrBucket101 on August 05, 2009, 06:27:00 PM
QUOTE(rolopuente @ Aug 5 2009, 06:37 PM) View Post

So where exactly in JF would you do that?

http://jungleflasher...ngleFlasher.pdf
Title: .bin Files Lost For Liteon
Post by: OggyUK on August 05, 2009, 10:03:00 PM
Because he's probably minced the UART of the drive (going on his previous thread)

I really dont see why you had to throw another method (that doesnt copy full serial ranges) into the mix either.
Title: .bin Files Lost For Liteon
Post by: OggyUK on August 05, 2009, 10:16:00 PM
Manual spoof of the key into iX will not copy his serial ranges over.

How I listed is the correct method to do what he is trying to do.
Title: .bin Files Lost For Liteon
Post by: rolopuente on August 05, 2009, 10:39:00 PM
UPDATE! For what is worth I was able to dump the firmware again, using a homemade spear thanks a lot for your help!

I am now up and running my liteon ixtreme 1.6 thanks to you guys!

Honestly I followed that approach because I didn't wanna mess with my sammy, since it was already working.
Probably tomorrow I'll update it too.

Thanks again, and keep gaming!

Cheers!
Rolo