Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: Bravo1 on May 19, 2009, 11:05:00 AM
Title: Lite-on Drive, Ixtreme 1.6 And Lite-on-erase
Post by: Bravo1 on May 19, 2009, 11:05:00 AM
I have a Lite-On Drive that is running ixtreme 1.51 and want to upgrade to 1.6. However, I don't have a Connectivity Kit to perform the power on/off quickly.
Would it make sense that I could just run the Lite-On-Erase command from DOS and update the firmware that way?
Or should I just get/make a connectivity kit for future upgrades as well?
Thanks!
Title: Lite-on Drive, Ixtreme 1.6 And Lite-on-erase
Post by: Ranger72 on May 19, 2009, 11:18:00 AM
Since you have 1.51 installed you don't need the probe to get the drive key and dump files.
You can power cycle the drive using the 360 power supply.
Title: Lite-on Drive, Ixtreme 1.6 And Lite-on-erase
Post by: kaneda_77 on May 19, 2009, 11:25:00 AM
^^^^ wut he said. you get plenty of time while it's waiting for you to power off and on
Title: Lite-on Drive, Ixtreme 1.6 And Lite-on-erase
Post by: Bravo1 on May 19, 2009, 11:41:00 AM
So just pushing the power button on the 360 instead of yanking the power plug from the drive is recommended?
Yes.
Title: Lite-on Drive, Ixtreme 1.6 And Lite-on-erase
Post by: OneRicardo on May 19, 2009, 03:54:00 PM
I flash mine in DosFlash, using the xbox power supply without problems... I put the files ( key and the other files ) in the main directory, erase and write and gives me no error!
Just one question, in the next firmwares, can i use the same way ?
This post has been edited by OneRicardo: May 19 2009, 10:54 PM
Title: Lite-on Drive, Ixtreme 1.6 And Lite-on-erase
Post by: ibbi on May 19, 2009, 04:13:00 PM
^^ Most probably yes.
Title: Lite-on Drive, Ixtreme 1.6 And Lite-on-erase
Post by: Bravo1 on May 19, 2009, 04:41:00 PM