Post by: Boogyman on February 12, 2009, 03:48:00 PM
What I mean by not proceeding is that the screen I am at is:
VIA Technologies, Inc. VIA VT6421 V-RAID CDROM BOOT BIOS v5.20
Copyright © VIA Technologies, Inc. All Right reserved.
6421R520.ROM - FOR RAID
Scan Devices,Please wait...
No Raid
Ctrl10 Chn10 Master HL-DT-STDVD-ROM GDR3120L - SATAPI mode
Press <Ctrl+Z> Key into User Window!
When I hit Ctrl+Z nothing happens.
Thanks for the help.
Post by: Takashi on February 12, 2009, 03:51:00 PM
Atleast I can't.
I have to use My Asus mobo pc with the Intel sata chipset,
and flash from within XP.
Post by: Traviss63 on February 12, 2009, 04:12:00 PM
There is no reason to use Slax when flashing a Hitachi. Podger created a wonderful little tool aptly named the Mode B Utility and it has been integrated into Jungle Flasher. Getting into mode B is as simple as pressing a button on Jungle Flasher...this may be blasphemous to say in these forums but I think we can all agree that although Textbook's tutorial is full of great info, especially for the noobish crowd... it's a little outdated when it comes to flashing techniques.
If you would like me to explain the process with Jungle Flasher let me know. (IMG:style_emoticons/default/biggrin.gif)
This post has been edited by Traviss63: Feb 13 2009, 12:13 AM
Post by: Takashi on February 12, 2009, 04:22:00 PM
not necessarily the via card within it.
I just never bothered to diagnose it further.
Out of the almost 60 consoles i've flashed,
I've ran into 4 Hitachi's, thank god!
They suck!
Post by: Traviss63 on February 12, 2009, 04:27:00 PM
Post by: Boogyman on February 12, 2009, 10:43:00 PM
Post by: Traviss63 on February 13, 2009, 12:59:00 AM
Start Jungle Flasher go to the Hitachi GDR3120 Tab
Under Port Properties select the correct port for your Hitachi 59
Under Drive Revision click the 58/59 bubble
Under Drive select your Hitachi GDR3120l ROM 0059
Under Transfer Method click the Classic bubble
Under Flashing Options click the Dump Drive bubble
Under Port Properties ensure that your Hitachi drive is recognized and click Send Mode-B
After it completes click Open and the Hitachi tray should open
Insert a retail DVD movie or Xbox 360 game (retail meaning not burned) and click Close to close the tray
Make sure to stop any autorun caused by inserting the DVD and click Read to Source
Jungle Flasher will now read your Hitachi 59 original firmware and ask you to save it (name it orig.bin).
After saving, Jungle Flasher should automatically direct you to the Firmware Tool 32 Tab with your stock 59 firmware open in source
Now open your iXtreme1.4_Hitachi.rar and double click fwpack.rar.
Right click on 59_16-12x.bin and select Extract to specified folder choose a location and select OK
In Jungle Flasher, under the Firmware Tool 32 Tab, click Open Target Firmware and navigate to the 59_16-12x.bin you extracted and open it
Now click Spoof Source to Target and Jungle Flasher will inject your key into the Hitachi 59 ixtreme 1.4 hacked firmware.
Go back to the Hitachi GDR3120 Tab
Ensure that your Hitachi drive is still selected.
Under Flashing Options click the Flash Hacked F/W bubble
Click the Flash Hacked F/W button and Jungle Flasher will flash your hacked firmware.
Once it completes, go ahead and power down, plug the drive back into the 360 and test her out.
Hope that helped! (IMG:style_emoticons/default/biggrin.gif)
Post by: Boogyman on February 15, 2009, 07:15:00 PM
Is this a problem with my PC?
Post by: Takashi on February 15, 2009, 07:49:00 PM
Post by: Boogyman on February 16, 2009, 01:19:00 AM
Post by: Boogyman on February 18, 2009, 09:58:00 PM
Post by: vorny on March 07, 2009, 06:31:00 PM
QUOTE(Boogyman @ Feb 19 2009, 07:34 AM) 
Any help on this would be greatly appreciated.
i have the same problem when i open jungleflash it says drive not ready (IMG:style_emoticons/default/sad.gif) iv installed the port10 32 manualy and enabled the sata in bios (IMG:style_emoticons/default/blink.gif) also if i turn on my pc with the xbox turned on it wont boot @ all (IMG:style_emoticons/default/ohmy.gif) untill i switch off the xbox (IMG:style_emoticons/default/uhh.gif) btw im on vista 32 bit (IMG:style_emoticons/default/smile.gif) please help me out guys
Post by: vorny on March 07, 2009, 10:12:00 PM
still no luck guys but i did manage to see it come up as a drive in my bios settings 
just shame that jungleflash wont find it properly lol
Post by: Boogyman on March 07, 2009, 10:30:00 PM
Post by: vorny on March 08, 2009, 01:16:00 PM
QUOTE(Boogyman @ Mar 8 2009, 08:06 AM) 
Hey vorny I got mine working fine. You need the new Jungle Flasher 1.51. What I did was load up windows completely then turned on my xbox and loaded up Jungle Flasher and put it in mode B. When I restart the computer and windows loads up again the drive is detected and everything is fine. I was reading that you can't flash with Jungle Flasher until the new release they came out with like 2 days ago.
thanks for the reply but when i load up jungle flash it wont show any drive at all
it says vender = No Drive Detected also when i press send mode b after i have done the open tray and power off thing , the jungle flash will crash of i move the mouse away from the thing while its trying to put it into mode b im realy puzzled what to do do i first need it to find my drive before it will go into mode b ? or will it find my drive once its in mode b i dont understand 
when i go into my bios it shows the drive there so its connected right
Post by: Boogyman on March 08, 2009, 08:23:00 PM
