Post by: smirnisdeman on December 27, 2008, 11:11:00 AM
just to clear off, i have just hooked up the drive to the pc with a sata cable, and power the drive through the 360 console power supply.
DVDKey32 output:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~
JungleFlasher 0.0.26 Beta
Session Started Sat Dec 27 17:55:01 2008
Found 4 I/O Ports.
Found 1 Com Ports.
Found 4 windows drives.
Found 0 CD/DVD drives.
Sending DVDKey request to I/O port 0x9000 and COM1
................................
***WARNING*** Key does not look good
Your Key is: 00000000000000000000000000000000
Sending Inquiry to I/O port 0x9000
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Sending Inquiry to I/O port 0x9000
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0090: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 00 00 00 00 ....
Sending Serial data request to I/O port 0x9000
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 FF FF FF FF - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 12 00 FF FF 02 00 02 00 ................
0030: 02 00 02 00 02 00 02 00 - 02 00 02 00 02 00 02 00 ................
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 14 00 FF FF ................
Sending DVDKey request to I/O port 0x9000 and COM1
................................
***WARNING*** Key does not look good
Your Key is: 00000000000000000000000000000000
Sending Inquiry to I/O port 0x9000
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 37 34 38 35 30 43 41 30 - 41 31 44 36 30 38 43 47 74850CA0A1D608CG
0030: 38 33 37 39 31 31 30 30 - 43 56 31 20 20 20 00 00 83791100CV1 ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Sending Inquiry to I/O port 0x9000
0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 38 - 43 47 38 33 37 39 31 31 ....D608CG837911
0020: 30 30 43 56 31 20 20 20 - 00 00 00 00 00 00 34 37 00CV1 ......47
0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 00 00 ............h...
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 20 20 00 00 ..
Sending Serial data request to I/O port 0x9000
0000: 44 36 30 38 43 47 38 33 - 37 39 31 31 30 30 43 56 D608CG83791100CV
0010: 31 20 20 20 FF FF FF FF - 38 49 30 31 30 30 37 30 1 ....8I010070
0020: 31 37 43 31 31 34 58 58 - 9C 89 FF FF 53 34 50 38 17C114XX....S4P8
0030: 39 30 35 30 30 30 30 30 - 31 33 32 39 31 33 34 31 9050000013291341
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 31 FF FF ............A1..
i can save the key.bin files... but if it says the key is not good, i feel pretty unsafe on continueing without guidance (IMG:style_emoticons/default/smile.gif)
thanks in advance
Post by: SimianEtza on December 27, 2008, 11:44:00 AM
What setup are you using to extract it?
Post by: Siph3r on December 27, 2008, 12:13:00 PM
Post by: xbox360sexual on December 27, 2008, 12:55:00 PM
Post by: smirnisdeman on December 27, 2008, 03:03:00 PM
QUOTE(xbox360sexual @ Dec 27 2008, 09:31 PM) 
Just for reference, 0000 = shit serial connection, CCCC = drive tray not half closed (IMG:style_emoticons/default/smile.gif)
with serial connection, you mean the sata connection? or the connection to the COM1 port? because, like i said in my first post.. i only have a sata connection..
and if that cable is the problem what can i do to solve it? (IMG:style_emoticons/default/smile.gif)
great thanks
there is only one com port in jungle flasher.. only com 1
like i said in the start, i only have it hooked up with a red sata cable to my pc, is that good enough?
or do you need another serial cable to connect to that specific com port?
thanks
what do you mean by setup?
it's an intel core 2 quad cpu .. with an asus psk-premium mobo
it's running windows xp sp3
Post by: thcmagus on December 27, 2008, 03:11:00 PM
QUOTE
Please note that at this time, IXtreme 1.5 still requires the utilization of a RS232 to TTL serial hardware, or a popular variant such as CK3 with Probe or Maximus Xtractor. This is necessary to extract the key/inquiry/identify .bin files. These files are neccessary for spoofing & gathering your key, even if you are just flashing the 1.5 IXtreme to a LiteOn drive. They contain serial information that is required for proper identification and security related issues. Note that spoofing to previous versions of IXtreme are NOT stealth, and is not supported.
your getting that reading because you have nothing connected to your pc's serial port..
Post by: xbox360sexual on December 27, 2008, 03:38:00 PM
QUOTE(smirnisdeman @ Dec 27 2008, 10:39 PM)
with serial connection, you mean the sata connection? or the connection to the COM1 port? because, like i said in my first post.. i only have a sata connection..
COM connection mate (IMG:style_emoticons/default/smile.gif)
Post by: Fast240Z on December 27, 2008, 11:34:00 PM
I tried this method on two computers, one with a usb to serial adapter and one with on board serial. No success on either read. I've also removed pin 3 and ejected the drive half way as everyone else said to do.
What should I do from here?
Post by: Nismo on December 28, 2008, 02:19:00 AM
http://team-xecuter.com/forums/showthread.php?t=48236
I then used Jungleflasher to create the FW, then L-O-ERAS and DOSFLASH to write the FW in DOS (as JF just doesn't work for me when flashing the drive for some reason)
Post by: mayto on December 28, 2008, 08:11:00 AM
Post by: SuperSoldier on January 04, 2009, 02:47:00 AM
Post by: micflair on January 04, 2009, 06:04:00 AM
So when you eject the drive halfway and try to read you get 0000000000 or cccccccccccc. After you have ejected the drive, turn the CK3 OFF and back on again, the drive will stay half way out as you left it. Then try read the key, works for me everytime!
Post by: SlayerQC on January 04, 2009, 02:07:00 PM
QUOTE(xbox360sexual @ Dec 27 2008, 01:31 PM)
Just for reference, 0000 = shit serial connection, CCCC = drive tray not half closed (IMG:style_emoticons/default/smile.gif)
Team Xecuter begs to differ, here's a quote from their ck3 site:
TROUBLESHOOTING NOTE:
If your drive key is 000000000 = Your tray is not half way correctly (probably too much in or you didn't press eject on the CK3 and push the tray half way in manually) (See Image 3)
If your drive key is CCCCCCCC = You need to power cycle the CK3 (Turn power off, unplug SATA cable from DVD, plug SATA cable back in, turn CK3 power ON), or you have not connected the TX point correctly with the CK3 Probe (or not soldered correctly if you do not have the Probe)
QUOTE(micflair @ Jan 4 2009, 06:40 AM)
I have the CK3 probe and kit to read.. following there instructions did'nt work for me, just a slight adjustment and it works everytime.
So when you eject the drive halfway and try to read you get 0000000000 or cccccccccccc. After you have ejected the drive, turn the CK3 OFF and back on again, the drive will stay half way out as you left it. Then try read the key, works for me everytime!
That's the way!
This post has been edited by SlayerQC: Jan 4 2009, 10:11 PM
Post by: nu1mlock on January 04, 2009, 02:59:00 PM
QUOTE(SlayerQC @ Jan 4 2009, 10:43 PM)
Team Xecuter begs to differ, here's a quote from their ck3 site:
TROUBLESHOOTING NOTE:
If your drive key is 000000000 = Your tray is not half way correctly (probably too much in or you didn't press eject on the CK3 and push the tray half way in manually) (See Image 3)
If your drive key is CCCCCCCC = You need to power cycle the CK3 (Turn power off, unplug SATA cable from DVD, plug SATA cable back in, turn CK3 power ON), or you have not connected the TX point correctly with the CK3 Probe (or not soldered correctly if you do not have the Probe)
That's the way!
Well, Team Xecuter is probably wrong.
000000 doesn't necessarily mean that the tray isn't half way closed. First time I flashed a Lite-On with JungleFlasher I did this:
I powered on the drive, ejected it, pushed the tray half way, then tried to read the key. That gave me a lot of 0000's.
What I forgot was to power of and then on the drive in-between the pushing.
When I instead powered on the drive, ejected it, powered it off, pushed it half way, powered it on, then tried to read the key - I got the correct key just fine. It has worked ever since.
So, a lot of 00000's doesn't necessarily mean that the tray isn't half way closed. It could also mean that you forgot to power of the drive in-between the pushing.
Either Team Xecuter is wrong, or they just didn't know this when writing that tutorial. Also, it doesn't say anything about the need to power of the drive before pushing the tray half way, even though it is necessarily (at least on my setup).
nu1mlock
nu1mlock
Post by: sinvel on January 06, 2009, 01:23:00 PM
I had the exact same problem trying to get the key from my Liteon with a CK3 lite. I always got the profile.bin and identity.bin files just fine but get a 00000000000000 BAD KEY with both jungleflasher and doskey32 on COM1. I know that I was halfway closing the tray correctly, and that I soldered the r707 points correctly on the drive. I read somewhere that the sata cable will only get you the profile and identity files, but the key can ONLY be retrieved using the serial (or usb) cable. I didn't know how to test my serial port, since I'm not that good with computers, so I finally bought a PCI serial adapter (you know the ones that give you extra serial ports) which gave me an extra COM3 and COM5. I connected the serial from COM5 to the ck3 lite and it worked and gave me the key the first time I tried, both in dvdkey32 and jungleflasher!
I hope this helps somebody out.