Post by: Xbox-Scene on December 23, 2008, 12:18:00 AM
IXtreme 1.5 LiteOn - BenQ - Samsung - TEAM JUNGLE Posted by Iriez | December 23 02:18 EST | News Category: Xbox_Xbox360 |
| A new firmware release for a variety of Disc Drives on the Xbox360... TEAM JUNGLE Presents IXtreme 1.5 firmware ----------------------------------------- World first IXtreme fw for the unhackable Liteon drive! Also for Benq and Samsung drives! This has been a huge effort by everyone in Team Jungle comprising of the best talent in the world. It has been a privilege to work in the team which has enabled us to get to this point. Truly a worldwide effort and the greatest hack that i have been involved in! The road has been a long one: - getting the key serial output - decapping the 1319L chip - reading the embedded flash, very difficult! - decrypting fw - creating iXtreme - creating Jungleflasher GUI+tools Greatest teamwork eva! Features -------- Support for Liteon DG-16D2S unhackable drive Flash from Windows with new Jungleflasher GUI Smart Inquiry cdb for enhanced spoofing - Liteon Enhanced c/r timing - all drives Enhanced disc jitter - all drives Enhanced spoofing support for Liteon - Samsung and Benq Enhanced bad angle support - all drives Secret Liteon MS Inquiry cdb support - Samsung and Benq Half Open tray on powerup for Windows inquiry/flash mode - all drives Disc lock/unlock cdb - Liteon Windows mode Drive key+serial info cdb - Liteon Windows mode More secure firmguard - Benq Hitachi 1.5 is set to be released shortly. Hold onto your pants Hitachi owners! Release will be in early january. =) There is ALOT of new information to digest, in regards to this entire project, and the utilization of the LiteOn IXtreme firmware. With this release, also includes a new FirmTool (version 1.3), a beta version of JungleFlasher, which is a new GUI based all-in-one flash that includes a firmware tool, DVDKEY32 0.7, MTK flashing and Hitachi support. Please note that this software IS BETA and will not function 100%. Yes, there will be plenty of bugs :) JungleFlasher logs all errors/actions and will ask you to save a log upon exit. If you have a error please help us improve the software by emailing the log file to JungleFlasher - at - gmail - com. At this moment, we have had quirky issues in regards to VIA chipsets and flashing/reading/erasing the LiteOn drive. Please pay attention to the 2nd prompt in particular after hitting the Lite-On-Erase button. Power cycling the drive at the correct time is very important for VIA users. If the VIA polls the drive after erase, it WILL freeze/lock your computer. Tools for DOS erase/flash/key/spoof are included in this release for any users having difficulties within windows. JungleFlasher REQUIREMENTS: -PortIO32.exe - you MUST run this exe to install PortIO onto your system! (included in release)if you have issues installing in vista please reference here:here If you have a x64 system PortIO is not currently supported. Please use a x32 system to modify your drive. -.NET 2.0 or above Please note that at this time, IXtreme 1.5 still requires the utilization of a RS232 to TTL serial hardware, or a popular variant such as CK3 with Probe or Maximus Xtractor. This is necessary to extract the key/inquiry/identify .bin files. These files are neccessary for spoofing & gathering your key, even if you are just flashing the 1.5 IXtreme to a LiteOn drive. They contain serial information that is required for proper identification and security related issues. Note that spoofing to previous versions of IXtreme are NOT stealth, and is not supported. If you have a CK3 please refer to this tutorial for dvdkey extraction:here If you have a Maximus Xtractor please refer to this tutorial for dvdkey extraction:here We have compiled a tutorial on flashing the Liteon drive prior to the release of JungleFlasher. Tutorial is located here:here Instructions on flashing a LiteOn with JungleFlasher are as follows: 1: Hookup LiteON to sata port and power drive 2: In JungleFlasher select MTK Flash 32 Tab. 3: Select correct port (see above tutorials for figuring out the correct port) 4: Hit Lite-On-Erase button. NOTE - This is done AFTER you have already successfully transferred your inquiry.bin / identify.bin / key.bin files!!! Please read the Prompts VERY carefully! It is important to power cycle the drive at the correct moment to prevent your computer from freezing with VIA cards. 5: After power cycle, drive should return status 0x72 and display Flash information. If it does not, click Device ID and power cycle as prompted. If still not successful then you did not successfully erase the drive. 6: Once Flash information is displayed, you are ready to write! Go to firmware tool 32 tab and select "Load from dump files" and select your key/inquiry/identify .bin files. Then select ix15-liteon.bin after pressing "Open Target Firmware". Press "Spoof Source To Target". Then "Save to File" and save your CFW.bin. 7: Go back to MTK Flash 32 tab and select Write. It should automatically take the liteon firmware you loaded in the Firmware 32 tab and flash to the drive. It will automatically verify flash. If verified your done :) If write verification fails, then there is likely a issue with JungleFlasher and your sata chipset. Please use DosFlash(info)(info) to flash the drive with the CFW.bin with the correct spoofed information. If the drive is successfully erased, dosflash will see the flash information and will be capable of writing! DOS Instructions: You will need to have your key.bin/inquiry.bin/identify.bin handy using the windows applications! If this is the case, please use firmtool 1.3 or JungleFlasher to prepare your ix15-liteon.bin with the correct dvdkey and spoofed serial information(inquiry/identify). At this moment, DOS based dvdkey/inquiry/identify extraction is not fully supported by TEAM JUNGLE. There is DOS based instructions for the CK3 by xecuter in the tutorial above. 1: Run L-O-Eras.EXE with the correct port specified (see tutorial above for Lite-On-Erase.exe information) 2: Run DosFlash.exe 3: Select correct number that represents your sata port / LiteOn drive. Note that the drive has to be successfully erased in order for DosFlash to see the drive! 4: Select write, and choose your liteon firmare .bin that you have prepared with your dvdkey / correctly spoofed identify / inquiry data! 5: Write, plug in drive and play xbox :) A new DosFlash will be released very shortly that will include LiteOn DVDKey extraction and dummy.bin capabilities. Note that firmtool uses dummy.bin to correctly spoof information from dumped key/inquiry/identify into other 1.5 firmwares. At this moment JungleFlasher and DVDKey32 support the dummy.bin feature! Official Site: n/a Download: JungleFlasher 0.0.26 BETA here Download: FirmTool 1.3 here Download: DVDKey32 0.7 here Download: Updated iPrep Definitions here Download: IXtreme 1.5 n/a (built with XDK) News-Source: xbins.org |
Post by: Iriez on December 23, 2008, 01:16:00 AM
In regards to the above, bigbugga7373 PM'd me and said....
QUOTE
hello i found a way to install PortIO on my windows xp pro 64bit system,i just installed it failed went to the driver folder it made copyed all the driver files to the same folder as the JungleFlasher .26 BETA folder and now JungleFlasher .26 BETA works great just flashed my jasper 360 with a lite on drive and i flashed my falcon elite with benq drive.big thanks to you and the whole team
QUOTE(Big_Dave @ Dec 23 2008, 04:22 AM) 
BIG thanks to all involved - even the coffee guy!
Can't seem to change JungleFlasher to my SATA port "EFF0" - Any ideas?
You have not correctly installed PortIO32.
QUOTE(ilin @ Dec 23 2008, 04:54 AM)
So awesome, will try this in couple hours. Is there any way i can make donation for such awesome team?
JungleFlasher will be released with a banner for donations. This was intented, but the rush to get this to everyone prevented it. Future versions will have it.
QUOTE(Dead Echo @ Dec 23 2008, 05:07 AM)
Very nice job Team Jungle!
We just need an updated tutorial for newbies like me looking to update his BenQ drive - The old 360mods tutorial have been rendered null and void by various changes apparently.
Yes, im sure someone will update the tutorials to include JungleFlasher. However this is ixtreme like any other ixtreme. You can flash with DosFlash16 or DosFlash32!
QUOTE(paul543 @ Dec 23 2008, 05:14 AM)
is there going to be a new Dos Version of DVDKey? There is a new version for windows and it seems that the current DVDKey dos version doesn't create the dummy.bin file.
Not yet. Soon
QUOTE(Nismo @ Dec 23 2008, 05:21 AM)
Great stuff
What's the best way to update a BENQ with 1.5? Should I be using this new Jungle Tool, or wait for definitions to be updated for the iPrep method?
New definitions are out! Get them here: Download: Updated iPrep Definitions:...1.5-ixtreme.rar
QUOTE(antonchigurh @ Dec 23 2008, 05:29 AM)
No good. I just tried to erase my firmware computer froze on me. After reboot liteon drive will not respond. I think its bricked. I was using a via chipset. I hope you guys can help me out.
Manually uninstalling the VIA then deleting the drivers yourself (system32/vmraid.sys) so that windows does not automatically install the card will fix your freezing problems. However, this WILL cause windows to flip out and tell you that you have new hardware every damn boot and 3 seconds
The VIA drivers constantly poll the drive, and this is a issue, especially with erased liteon drives.The liteon is VERY difficult to brick. As long as you dont flash some stupid shit, you can always fix it. It is normal for the drive to not eject after erase!!!
QUOTE(bissmo @ Dec 23 2008, 05:47 AM)
ive got the same problem started erase got 0x72 so i switched it off and on like it says and now its just freazing up on me does this mean its been wiped ..should i just try dos for the flash.... and im using via 6421 card
also the drive will not eject
Yes, try dosflash or the msg above to get it working in windows.
QUOTE(--NZ MODZ-- @ Dec 23 2008, 05:58 AM)
Wicked - I have tried it out and it works a treat, at least at getting the Lite On key - I have been trying all day to get a valid key using the ck3tool_v1.2.4 but kept getting CCCCCC's - then first time using Team Jungle - JungleFlasher I got a valid key!!! Stoked I checked Xbox-scene before bed
Thanks for the effort put into this tool and the firmware, much appreciated.My first attempt wasn't quite 100% successful as I did not know how long to wait before power cycling the drive during the Lite On Erase - and now the drive seems munted, cant eject and not being recognised - so I need to find out whether or not it is salvageable - if I undo the solder connections will it still work? I havent tested it yet. At least I have the valid key, identify and inquiry strings I can flash onto another drive if I have to, but it would be good to get a hacked firmware on the Lite On finally.
Just like the Hitachi 78FK/FL - Took a long time but we got there.
Now lets get these drives to report discs present so we can play games from just the hard drive.
Can anyone offer any help regarding my now non-responding Lite-On? I am using the Xecuter CK3 Pro and USB - no RS232 cable. Have successfully read off keys etc but unable to erase and flash.
Glad to hear the success
The CK3 is not required for flashing. ALSO....xecuter is using dvdkey 0.6. USE THE 0.7 VERSION FOR KEY EXTRACTION!! Just power and sata. It sounds like you are having issues getting your liteon hooked up, and in the correct mode (half tray open) and seeing it on the correct sata port, with PortIO32 installed.QUOTE(cardyology @ Dec 23 2008, 06:22 AM)
First of all let me just say kudos for achieving what they said could not be done. You guysa are seriously skilled
My 360 is rocking a BENQ on ix1.4 spoofed as a liteon in my 360Elite... as Im sure many lite-on users have also.
Will peeps who have replaced their lite on drives be upgrading to 1.5? If so, will it be best to continue to use the spoofed BENQ drive & flash it to this new 1.5 fw or can we go back to our lite-on drives? Is there a "better" one to use? Any advantages/disadvantages to going back to liteon or sticking with BENQ>?
Thanks again guys, this is gonna make my flashed-console-wanting, lite-on-owning friends very very happy this xmas!
YES. Updated to 1.5 ABSOLUTELY. Previous versions of ANY firmware are NOT compatible with spoofing from LiteOn. There is extra security features in 1.5 that relates to cross drive spoofing for liteon that is a MUST.
Post by: stevenalvarado on December 23, 2008, 01:22:00 AM
Post by: gaatjenixaan on December 23, 2008, 01:23:00 AM
Post by: tronix.co.nz on December 23, 2008, 01:26:00 AM
Post by: eyepartie on December 23, 2008, 01:27:00 AM
Post by: Heet on December 23, 2008, 01:27:00 AM
Thank you very much for all of your ALMOST IMPOSSIBLE work.
Post by: lord^infamous on December 23, 2008, 02:06:00 AM
Post by: StrictPuppet on December 23, 2008, 01:34:00 AM
Post by: deilzfcjk on December 23, 2008, 01:36:00 AM
Post by: Iriez on December 23, 2008, 01:36:00 AM
QUOTE(lord^infamous @ Dec 23 2008, 04:06 AM)
HELL YEAH. Xbins here I come.
thats my boy!
Post by: sargos on December 23, 2008, 01:36:00 AM
Post by: Pseudo99 on December 23, 2008, 01:39:00 AM
Great job guys!!!!!!!
Post by: angelbless on December 23, 2008, 01:40:00 AM
I cant be more happy...
thxs a lot..Now if just textbook could do a guide to hack the 360 for a really starter in all the Xbox scene like me... then this would be paradise
Post by: Kurto2022 on December 23, 2008, 01:40:00 AM
http://team-xecuter....iteon_probe.htm
Post by: Big_Dave on December 23, 2008, 01:46:00 AM
Can't seem to change JungleFlasher to my SATA port "EFF0" - Any ideas?
Post by: Killah2km on December 23, 2008, 02:23:00 AM
Post by: angelbless on December 23, 2008, 01:47:00 AM
QUOTE(Kurto2022 @ Dec 23 2008, 05:16 AM)
Wow!!!! that was really quick thank you very much!!!
Post by: Toddler on December 23, 2008, 02:24:00 AM
Post by: nbitzis on December 23, 2008, 02:25:00 AM
Post by: driesken on December 23, 2008, 02:27:00 AM
Post by: flow on December 23, 2008, 02:30:00 AM
Thanka you!
It is X-MAS earlier this year!
Post by: huh07 on December 23, 2008, 02:40:00 AM
Post by: swg1251 on December 23, 2008, 02:12:00 AM
Good thing I just got my xtractor
Post by: ilin on December 23, 2008, 02:54:00 AM
Post by: tezza192 on December 23, 2008, 03:01:00 AM
Happy Christmas!!!
Post by: Dead Echo on December 23, 2008, 03:07:00 AM
We just need an updated tutorial for newbies like me looking to update his BenQ drive - The old 360mods tutorial have been rendered null and void by various changes apparently.
Post by: paul543 on December 23, 2008, 03:14:00 AM
Post by: regeli on December 23, 2008, 02:43:00 AM
Post by: Nismo on December 23, 2008, 02:45:00 AM
What's the best way to update a BENQ with 1.5? Should I be using this new Jungle Tool, or wait for definitions to be updated for the iPrep method?
Post by: lord^infamous on December 23, 2008, 03:27:00 AM
Post by: jumojn on December 23, 2008, 03:27:00 AM
Post by: antonchigurh on December 23, 2008, 02:53:00 AM
Post by: InvidiousDemise on December 23, 2008, 03:05:00 AM
Can anyone explain to me what the bad angle thing is? Does that mean better chance at reading security sectors and stuff that might not have burned well?
Please forgive my ignorance in this subject.
I'm very glad this came out when it did. I just took my box apart yesterday so I can paint it and I might flash my benq.
Post by: mac456 on December 23, 2008, 03:08:00 AM
Am i right to think if i am using a montherboard chipset (ich8) for flashing the lite-on with the team jungle software. it should not come accross any problems?
Post by: Wolf12886 on December 23, 2008, 03:09:00 AM
You guys are awesome
Post by: Th3_Burn3r on December 23, 2008, 03:11:00 AM
GREAT WORK
i flashed my lite on in less than 1 minute and it runs great
Post by: bissmo on December 23, 2008, 03:11:00 AM
also the drive will not eject
This post has been edited by bissmo: Dec 23 2008, 11:15 AM
Post by: gotloveforall on December 23, 2008, 03:15:00 AM
Thanks for everything, TEAM!
Guess what?
I just picked up my Maximus 360 Xtractor Tool + Spear from the Post Office just a few hours ago.
THERE IS A GOD!
Post by: brokentwice on December 23, 2008, 03:22:00 AM
went to do 3rd and fourth ... and it frooze the pc after erase ...
Looked like all hope was gone then i went back to good old dosflash ..
AND ALL IS WELL !!
I recommend that everyone use dosflash since it wont lock up the pc.
Windows is freezing cause the Drive no longer has firmware when it locks up mid erase .
Hope this helps
and once again merry xmas all !
Post by: --NZ MODZ-- on December 23, 2008, 03:22:00 AM
Thanks for the effort put into this tool and the firmware, much appreciated.My first attempt wasn't quite 100% successful as I did not know how long to wait before power cycling the drive during the Lite On Erase - and now the drive seems munted, cant eject and not being recognised - so I need to find out whether or not it is salvageable - if I undo the solder connections will it still work? I havent tested it yet. At least I have the valid key, identify and inquiry strings I can flash onto another drive if I have to, but it would be good to get a hacked firmware on the Lite On finally.
Just like the Hitachi 78FK/FL - Took a long time but we got there.
Now lets get these drives to report discs present so we can play games from just the hard drive.
Can anyone offer any help regarding my now non-responding Lite-On? I am using the Xecuter CK3 Pro and USB - no RS232 cable. Have successfully read off keys etc but unable to erase and flash.
Post by: cardyology on December 23, 2008, 03:46:00 AM
My 360 is rocking a BENQ on ix1.4 spoofed as a liteon in my 360Elite... as Im sure many lite-on users have also.
Will peeps who have replaced their lite on drives be upgrading to 1.5? If so, will it be best to continue to use the spoofed BENQ drive & flash it to this new 1.5 fw or can we go back to our lite-on drives? Is there a "better" one to use? Any advantages/disadvantages to going back to liteon or sticking with BENQ>?
Thanks again guys, this is gonna make my flashed-console-wanting, lite-on-owning friends very very happy this xmas!
Post by: mad473 on December 23, 2008, 03:48:00 AM
Many Thanks to the team. Post by: podger on December 23, 2008, 03:50:00 AM
Always best to use same drive if possible... Cross spoofing is alway more ricky than as straight flash
For benq, you should move to 1.5 if you can.... there are several imporvements in there...
Post by: Dead Echo on December 23, 2008, 03:54:00 AM
This post has been edited by Dead Echo: Dec 23 2008, 11:57 AM
Post by: alexinfurs on December 23, 2008, 03:54:00 AM
I already have a liteon's KEY.bin,INQUIRY.bin and IDENTIFY.bin but i don't have a dummy.bin
Do i have to repeat the procedure or there is a way to insert my key in hacked firmware without dummy??
Thanks and marry christmas
Post by: markyk1974 on December 23, 2008, 04:06:00 AM
Post by: alexinfurs on December 23, 2008, 04:09:00 AM
QUOTE(markyk1974 @ Dec 23 2008, 12:42 PM)
Before i attempt the flashing of my lite on, can someone just confirm that my key.bin, enquiry.bin and identify.bin should only be 1k in size. When i retreived these files the key looked legit and everything went smoothly. Thanks in advance.
yes. but key.bin is just 16 bytes
Post by: ilin on December 23, 2008, 04:09:00 AM
QUOTE(alexinfurs @ Dec 23 2008, 12:30 PM)
Hi guys, I have a little question
I already have a liteon's KEY.bin,INQUIRY.bin and IDENTIFY.bin but i don't have a dummy.bin
Do i have to repeat the procedure or there is a way to insert my key in hacked firmware without dummy??
Thanks and marry christmas
No, when you load KEY.bin,INQUIRY.bin and IDENTIFY.bin in jungle flasher, window will popup and ask where to save dummy.bin
Post by: cRACKmONKEY421 on December 23, 2008, 04:12:00 AM
Post by: alexinfurs on December 23, 2008, 04:15:00 AM
QUOTE(ilin @ Dec 23 2008, 12:45 PM)
No, when you load KEY.bin,INQUIRY.bin and IDENTIFY.bin in jungle flasher, window will popup and ask where to save dummy.bin
Thanks a lot! (I don't have a windows pc now and i don't have tryed)
Post by: aggybong on December 23, 2008, 04:20:00 AM
It even says that when I try to load the ixtreme firmware with "Open Target Firmware"
What am I missing? I'm on Vista32.
Edit: I've also tried to use FIRMTOOL, but it's asking for orig.bin to be 256k in size, when I don't have that (I have the 3, 1KB files that a Lite-On should have).
So I'm still stuck (IMG:style_emoticons/default/sad.gif)
This post has been edited by aggybong: Dec 23 2008, 12:27 PM
Post by: lazzeri on December 23, 2008, 04:21:00 AM
Kudos! I hope Santa bring you all some nice gifts, you well deserved them! ;-)
Post by: braveheart43 on December 23, 2008, 04:29:00 AM
QUOTE(alexinfurs @ Dec 23 2008, 11:51 AM)
Thanks a lot! (I don't have a windows pc now and i don't have tryed)
SAME PROBLEM!
Ideas anyone?
Post by: SonicPower on December 23, 2008, 04:29:00 AM
Is there anything glaringly bad in the 1.4 firmware compared to the 1.5 firmware in terms of the C/R timings?
Post by: penfolduk on December 23, 2008, 04:36:00 AM
QUOTE(aggybong @ Dec 23 2008, 11:56 AM)
I am on step #6 of the Lite-On flash tutorial, and whenever I select my key\inquiry\identify .bin files, jungleflasher says "Can't Open file <path>"
It even says that when I try to load the ixtreme firmware with "Open Target Firmware"
What am I missing? I'm on Vista32.
Edit: I've also tried to use FIRMTOOL, but it's asking for orig.bin to be 256k in size, when I don't have that (I have the 3, 1KB files that a Lite-On should have).
So I'm still stuck
put the 3 bin files in the same folder as jungleflasher is located
i just tried and it worked
also move ix15 into same folder as well
Post by: pipniga on December 23, 2008, 04:38:00 AM
You did fantastic job.
Post by: cardyology on December 23, 2008, 04:38:00 AM
woot!
Post by: ruley on December 23, 2008, 04:43:00 AM
Post by: antonchigurh on December 23, 2008, 04:45:00 AM
Thanks TEAM JUNGLE and C4eva. (IMG:style_emoticons/default/biggrin.gif)
Post by: kero on December 23, 2008, 04:47:00 AM
Post by: Badger101 on December 23, 2008, 05:27:00 AM
I've just downloaded it from xbins
Is there any difference between the firmware files in the Dos folder and the ones in the root folder?
Thanks Team Jungle!!
Post by: run187 on December 23, 2008, 04:51:00 AM
QUOTE(Iriez @ Dec 23 2008, 08:52 AM)
Please note that if you have a x64 system, there is not a currently known way to install PortIO to your system! If anyone knows a work-around please feel free to PM me and I will investigate.
Can you not just install it normaly then copy paste the files into the JF folder from the driver folder
And thanks for the work this will give me the option to back up my games in case decide to walk around the Front room with my pad in hand and trip over the xbox again ruining me disk..
Post by: braza on December 23, 2008, 04:55:00 AM
Post by: aggybong on December 23, 2008, 04:58:00 AM
QUOTE(antonchigurh @ Dec 23 2008, 06:21 AM) 
I finally got it. This is for anyone that is haveing problems with windows. You need to use dosflash. If you already erased your Lite on drive in windows with JungleFlasher .26 BETA and windows freezes on you you are ok. Just finish with dosflash. Create a bootable usb drive with the link http://www.bay-wolf.com/usbmemstick.htm. After you finished copy over your hacked firmware and boot into dos. Run dosflash and select your port. Then select write and hacked.bin I hope this helps anyone that is haveing problems. If you have any ?'s just pm me.
Thanks TEAM JUNGLE and C4eva. (IMG:style_emoticons/default/biggrin.gif)
This isn't working for me. I type 'dosflash', and then it tries to find which port it's on. Port 2 has MTK Vendor Intro failed on Port 0xb400. 0xb400 is what I used in Windows to get the key, so I'm fairly positive that's the correct port.
After selecting 2, it asks me what I want to do. I pick "W" and it then says "Unknown flash chip!"
What am I doing wrong now?
Post by: farntheplaya on December 23, 2008, 05:02:00 AM
jungleflash crashes every time i try to run it. it locks up my PC as well
Post by: Muzzakus on December 23, 2008, 05:04:00 AM
I thought it was rock solid in 1.41 ??
Post by: biggy7 on December 23, 2008, 05:04:00 AM
This post has been edited by biggy7: Dec 23 2008, 01:07 PM
Post by: plugin on December 23, 2008, 05:07:00 AM
Post by: oxide32 on December 23, 2008, 05:10:00 AM
happy xmas to all and thanks for all the hard work guys.
Post by: tomgreen99200 on December 23, 2008, 05:12:00 AM
Post by: achysklic on December 23, 2008, 05:49:00 AM
Post by: biggy7 on December 23, 2008, 05:55:00 AM
QUOTE(achysklic @ Dec 23 2008, 12:49 PM) 
anyone know where i can get xbins auto dowloader program i really dont want to install mirc ?
have a look here mate: http://team-xecuter.com/ck3/downloads.htm
Post by: chenzhuops2 on December 23, 2008, 05:19:00 AM
Can flash to write?
Post by: ruley on December 23, 2008, 05:57:00 AM
QUOTE(achysklic @ Dec 23 2008, 10:19 PM)
anyone know where i can get xbins auto dowloader program i really dont want to install mirc ?
www.360mods.net
Post by: audi_a8 on December 23, 2008, 05:25:00 AM
this is all I need, right? I have a pc with serial port.
+ some way to power dvd.
I already got the via pci card, ready to go.
thanx
Post by: Teun. on December 23, 2008, 05:26:00 AM
But i've a question about flashing a LiteOn.
If i flash in Windows and it freezes, is my drive bricked after freezing?
Or can i just try to flash it again in Dos?
Post by: ruley on December 23, 2008, 05:26:00 AM
QUOTE(biggy7 @ Dec 23 2008, 10:10 PM)
Thanx worked a treat
Post by: alexinfurs on December 23, 2008, 05:27:00 AM
Post by: OggyUK on December 23, 2008, 05:29:00 AM
QUOTE(chenzhuops2 @ Dec 23 2008, 12:55 PM)
Can flash to write?
Yes, you probably used toolbox to insert key before.
No need for OFW, drive is locked once written.
Post by: alexinfurs on December 23, 2008, 05:29:00 AM
QUOTE(Teun. @ Dec 23 2008, 02:02 PM) 
Great Work, Respect for Team Jungle!!
But i've a question about flashing a LiteOn.
If i flash in Windows and it freezes, is my drive bricked after freezing?
Or can i just try to flash it again in Dos?
erase and flash again.
but I suggest you to flash directly in dos
Post by: dpbmt on December 23, 2008, 06:12:00 AM
easiest drive ive flashed so far!
Post by: pipniga on December 23, 2008, 06:12:00 AM
QUOTE(Badger101 @ Dec 23 2008, 01:27 PM)
Just a quick question. (And probably a silly one!)
I've just downloaded it from xbins
Is there any difference between the firmware files in the Dos folder and the ones in the root folder?
Thanks Team Jungle!!
According to MD5 Check, they are completely same.
Post by: Craigsblackie on December 23, 2008, 05:38:00 AM
Post by: Dead Echo on December 23, 2008, 05:40:00 AM
Post by: JAN_VIII on December 23, 2008, 05:42:00 AM
Post by: thorro on December 23, 2008, 05:43:00 AM
QUOTE(aggybong @ Dec 23 2008, 01:34 PM)
This isn't working for me. I type 'dosflash', and then it tries to find which port it's on. Port 2 has MTK Vendor Intro failed on Port 0xb400. 0xb400 is what I used in Windows to get the key, so I'm fairly positive that's the correct port.
After selecting 2, it asks me what I want to do. I pick "W" and it then says "Unknown flash chip!"
What am I doing wrong now?
Power cycle the drive, then run dosflash again. Worked for me.
Team Jungle, great work!
Post by: playerman on December 23, 2008, 05:50:00 AM
QUOTE(antonchigurh @ Dec 23 2008, 12:29 PM)
No good. I just tried to erase my firmware computer froze on me. After reboot liteon drive will not respond. I think its bricked. I was using a via chipset. I hope you guys can help me out.
I have similar problem.Ive used the option liteone erase and then it start doing something but after my computer froze so i think flash chip its not erased in full.windows doesnt boot when drive its connected.If i try hot plug on already booted winxp computer froze so i cannot erase again.dosflash is tying to do something but my drive doesnt want to give status 0x72 probably because its not erased in full(tried many times with power cycle).
command l-o-eras xxxx in dos doesnt do nothing(always status f80)
Any solution??Mayby somebody can make some kind of program to erase flash under dos or any other good solution for that.I hate windows wrrrr.... (IMG:style_emoticons/default/mad.gif)
This post has been edited by playerman: Dec 23 2008, 01:52 PM
Post by: dpbmt on December 23, 2008, 05:53:00 AM
Post by: Champion on December 23, 2008, 05:58:00 AM
Can you explaine:
Enhanced c/r timing - all drives
Enhanced disc jitter - all drives
Enhanced spoofing support for Liteon - Samsung and Benq
Enhanced bad angle support - all drives
Secret Liteon MS Inquiry cdb support - Samsung and Benq
Post by: BenieUK on December 23, 2008, 06:08:00 AM
QUOTE
cant even get it to work
jungleflash crashes every time i try to run it. it locks up my PC as well
jungleflash crashes every time i try to run it. it locks up my PC as well
Me too, clean install vista 32bit, all drivers installed, never had a problem with ALL other software/tools but this one just lockup my pc soon as i try to run it (even tried compatibility mode) any ideas ?
Post by: Digital_sin on December 23, 2008, 06:16:00 AM
Post by: dpbmt on December 23, 2008, 06:23:00 AM
Post by: Badger101 on December 23, 2008, 06:40:00 AM
QUOTE(pipniga @ Dec 23 2008, 01:12 PM)
According to MD5 Check, they are completely same.
Thanks mate.
Post by: mad473 on December 23, 2008, 06:44:00 AM
Post by: pipniga on December 23, 2008, 06:46:00 AM
But if you have ck3, I would use ck3.
Post by: bucko on December 23, 2008, 06:48:00 AM
QUOTE(Iriez @ Dec 23 2008, 08:52 AM)
Please note that if you have a x64 system, there is not a currently known way to install PortIO to your system! If anyone knows a work-around please feel free to PM me and I will investigate.
I have a X360 USB and Vista x64 would that be a workaround?
Nice work guys, I'm so tempted to flash my Lite-On drive now the 1 year is out, but I'm just guessing I will get ROD if I try.
Almost tempted to get a second box but everyone thinks you are such a geek if you have two of the same console's like with my Xbox 1's
Post by: stevebull on December 23, 2008, 07:31:00 AM
I have a LiteOn Drive that i replaced with another(before you could flash them),
but got rid of the console. So i would like to test the drive in my own console.
Is this possible
Post by: mad473 on December 23, 2008, 07:31:00 AM
When i connect dvd drive to PC sata and switch on with ck3 , my pc pretty much locks up and thats before running jungleflash.
Please help im stuck.
(when powering the dvd drive with ck3, should the light be red or blue ?)
Post by: gaatjenixaan on December 23, 2008, 07:34:00 AM
Post by: WTFudge on December 23, 2008, 07:01:00 AM
Great work!
Post by: tadge on December 23, 2008, 07:40:00 AM
new to all this but would certainly be a big help...
cheers
Post by: mad473 on December 23, 2008, 07:40:00 AM
Post by: matyus on December 23, 2008, 07:43:00 AM
is there any way i can get this file do i realy need it
can i just flash my liteon without this file added to ixtreme fw and will it work
thanks and great job guys
Post by: mad473 on December 23, 2008, 07:44:00 AM
Post by: mac456 on December 23, 2008, 07:46:00 AM
Post by: KarlosB on December 23, 2008, 07:48:00 AM
ive yet to test it on my via pc, but it should be fine i guess, i used the CK3 pro with homemade spear.
offering the service in the UK ...check my signature for more details.
Post by: sp44m on December 23, 2008, 07:48:00 AM
It was impossible to get DVDKey32_v0.7 to work in Win2k on a MSI K8N Neo2 motherboard with a AMD Athlon 64bit 3000+. I used the onboard SATA from Nforce3 chipset and all i got in DVDKey32 were zeros (in Indentify, Inquiry & Key everything were 0). Tried just about everything (mostly different booting sequenses). This is strange because DVDkey_V1.2 workes just great on this computer under DOS.
But when i switched to another computer with WinXP and a VIA6421A it worked just great again!
Then i flashed using the first computer (MSI K8N) in DOS and no problems there! Had to run L-O-Eras.EXE a few times and reboot once, but then it worked like a charm.
I would realy like to see a new version of DVDKey for DOS which creates a dummy.bin, but it workes just fine as it is right now.
By the way, I can't flash BenQ with the MSI K8N ether, even when I use a VIA6421A. But the same VIA6421A flashes BenQ just fine when used in the other computer (P3 700Mhz Asus CUV4X).
Post by: PalmiNio on December 23, 2008, 07:49:00 AM
Got the Key and everything so it's just flashing for me.
1. I put l-o-eras.exe and dosflash.exe on my bootable USB. With the hacked .bin file which i created in Djungle Flash.
2. I typ, in DOS, l-o-eras.exe E800 (E800 being my port on my VIA chip). This should return med Status 72?
My friend gor Status FF72, is its good also?
Then i switch off switch on
3. After I get Status 72 i typ dosflash.exe. It should find something on my E800 port?
Does it do like with BenQ? Ask for Y/N? Is just to type Y? Or should i Switch Off/On? What if it get's stuck after that?
Sorry for maybe asking to much, can anyone write a more detalied DOS guide?
Post by: WTFudge on December 23, 2008, 07:57:00 AM
If your drive freezes using Jungletool do this:
1) Make a dos boot disk
2)Copy the insides of the 'dos' folder in Ixtreme 1.5
3)Copy your newly made Ixtreme 1.5 file with your own key inserted to it (rename it IX15.bin for ease)
4) Make sure 'l-o-eras.exe' is in there
5)Boot to dos
6)Type 'l-o-eras.exe' followed by the port number you're using. In my case I wrote 'l-o-eras.exe EC00'
EC00 being my port number
7)Keep retrying untill you get a 'FF72' status after the command
8 ) FF72 = Fully erased drive
9)Type 'Dosflash'
10) Should talk some stuff about MTK Vendors and should find any dvd drives present.
11) Keep pressing 'N' untill you come across your Lite-on (Mine was listed as Unknown Drive on port EC00)
12) Press 'Y' when you get to your Lite-on.
13) It should come up saying a number of options talking about 'W for write' , E for Erase etc.
14) Type 'LITEON W'
15) Should come up saying 'Type the file name of the bin you want to flash'
16) Type 'IX15.bin'
17) Wait and it should flash 4 banks (might say erase again aswell)
18 )Wait for a data checksum
Post by: paquete on December 23, 2008, 08:04:00 AM
Post by: mad473 on December 23, 2008, 08:06:00 AM
i wouldnt even know how to make a DOS boot disc.
Post by: WTFudge on December 23, 2008, 08:07:00 AM
Post by: t0m on December 23, 2008, 08:11:00 AM
thanks c4e/team
Post by: toneedo on December 23, 2008, 07:40:00 AM
QUOTE(WTFudge @ Dec 23 2008, 06:57 AM)
FF72 is good
If your drive freezes using Jungletool do this:
1) Make a dos boot disk
2)Copy the insides of the 'dos' folder in Ixtreme 1.5
3)Copy your newly made Ixtreme 1.5 file with your own key inserted to it (rename it IX15.bin for ease)
4) Make sure 'l-o-eras.exe' is in there
5)Boot to dos
6)Type 'l-o-eras.exe' followed by the port number you're using. In my case I wrote 'l-o-eras.exe EC00'
EC00 being my port number
7)Keep retrying untill you get a 'FF72' status after the command
8 ) FF72 = Fully erased drive
9)Type 'Dosflash'
10) Should talk some stuff about MTK Vendors and should find any dvd drives present.
11) Keep pressing 'N' untill you come across your Lite-on (Mine was listed as Unknown Drive on port EC00)
12) Press 'Y' when you get to your Lite-on.
13) It should come up saying a number of options talking about 'W for write' , E for Erase etc.
14) Type 'LITEON W'
15) Should come up saying 'Type the file name of the bin you want to flash'
16) Type 'IX15.bin'
17) Wait and it should flash 4 banks (might say erase again aswell)
18 )Wait for a data checksum
You forgot a step after step #8, POWER CYCLE after erasing your liteon.
Post by: FalconLTD on December 23, 2008, 08:28:00 AM
Thanks
Post by: toneedo on December 23, 2008, 08:32:00 AM
QUOTE(FalconLTD @ Dec 23 2008, 07:28 AM)
Sorry about the off topic or bad question. I am new to this hacking thing but I have researched alot in the past few days for the lite on drive. Where can I get the ixtreme 1.5 firmware? The first page says not available.
Thanks
http://360mods.net/index.php?name=Downloads&file=details&id=29
that app will connect you to xbins server to grab the fw
or you can can go to #xbins on irc efnet and type !list to get access to the server.
Post by: s1k3sT on December 23, 2008, 08:33:00 AM
QUOTE(FalconLTD @ Dec 23 2008, 10:28 AM)
Sorry about the off topic or bad question. I am new to this hacking thing but I have researched alot in the past few days for the lite on drive. Where can I get the ixtreme 1.5 firmware? The first page says not available.
Thanks
xbins (use toneedo's link)
Post by: undrugme on December 23, 2008, 08:34:00 AM
Post by: mad473 on December 23, 2008, 08:37:00 AM
So would it be worth while going the DOS route ?, wouldnt it just do the same ?
(i have via card)
Post by: FalconLTD on December 23, 2008, 08:43:00 AM
Post by: Scud02 on December 23, 2008, 08:43:00 AM
I am a n00b at this stuff
The thing is, I've a benq flashed to ixtreme 1.41
Now do I have to get my original firmware and use firmtool to make it ixtreme 1.5?
or can I just use the ixtreme 1.5 benq firmware that comes already in the downloaded files?
Please reply ASAP because I wana play 360
many thanks
Post by: soca90 on December 23, 2008, 08:13:00 AM
This post has been edited by soca90: Dec 23 2008, 04:23 PM
Post by: MODMANMIKE on December 23, 2008, 08:57:00 AM
Post by: csald on December 23, 2008, 08:21:00 AM
QUOTE(matyus @ Dec 23 2008, 10:43 AM)
i only have the key.bin and Inquiry.bin for my lite on but i dont have identity.bin (i used dvdkey32 to get the files) but that never gave me the identity one
is there any way i can get this file do i realy need it
can i just flash my liteon without this file added to ixtreme fw and will it work
thanks and great job guys
I also have this problem. Anyone have an answer?
Post by: nox78 on December 23, 2008, 09:02:00 AM
Now if it connect to the PC, all hangs in the DOS can not be determined. How to return him back original Firmware? Mtkflash? or Firmtool?
help
Post by: tekdelorean on December 23, 2008, 09:08:00 AM
To all the guys who worked on this, I want you to imagine the faces of M$ Engineers and the people who designed this DVD-ROM to be "UNHACKABLE", imagine their faces when the get the email from co-workers who lurk the scene, and then imagine their faces when they open this site and read this forum
IT HAS BEEN DONE BITCHES
Back to square one, time to hit the drawing board, TEAM JUNGLE DEFEATED YOU, SRY TRY AGAIN!!!!!
Pat yourselves on the back guys, this is EPIC
Post by: barzi on December 23, 2008, 08:33:00 AM
My way: Making a usb stick bootable with iPrep, and then dump/hack/flash it.
And what's new for the non-LiteOn users? And is it usefull to update to 1.5? Or if 1.41 worked OK, I don't have to switch?
This post has been edited by barzi: Dec 23 2008, 04:35 PM
Post by: Baunegaard on December 23, 2008, 08:35:00 AM
After Pressing Lite-On Erase, i found out that of some reasen the text field at the bottom, was bigger than the program window. So i could not read the last lines in the text field, meaning that i had no idea of when to power cycle. So when i couldnt do anything i tried to close the program, but the program froze. Now i cant get any respond from the drive at all.
Im on windows XP, and by the way has anyone else had the problem of Jungleflasher freezing every other time?
This post has been edited by Baunegaard: Dec 23 2008, 04:37 PM
Post by: Toddler on December 23, 2008, 09:14:00 AM
QUOTE
:[email protected] NOTICE #xbins :Channel locked temporarily due to flood, sorry for any inconvenience this may cause :-)
Would be decent of someone to mirror, no?
Post by: Ig0tGAME on December 23, 2008, 09:24:00 AM
QUOTE(barzi @ Dec 23 2008, 11:09 AM)
Can I just update my drive (BenQ 1.41) with the new 1.5, like I did from the orginial firmware to 1.41? Or is there a special way?
My way: Making a usb stick bootable with iPrep, and then dump/hack/flash it.
And what's new for the non-LiteOn users? And is it usefull to update to 1.5? Or if 1.41 worked OK, I don't have to switch?
I am currently using 1.41 in my BENQ as well...and I don't think I will upgrade.
But I will provide you some insight, I upgraded my BENQ from like 1.4 IXtreme to IXtreme 1.41 in the past....and you do it just like you normally would. Reason it works like that is because the only thing it needs from your previous firmware is the KEY, which is obviously in the firmware you are currently using on your drive or it wouldn't work. So it just extracts the key from your 1.41 just as it would from factory firmware...then uses that key in your new 1.5fw.
So yes...unless something has changed that I am not aware of...you can flash/overwrite your old firmware with the new one just like you did when you went from original to hacked fw.
Post by: barzi on December 23, 2008, 09:28:00 AM
QUOTE(Ig0tGAME @ Dec 23 2008, 05:24 PM)
I am currently using 1.41 in my BENQ as well...and I don't think I will upgrade.
But I will provide you some insight, I upgraded my BENQ from like 1.4 IXtreme to IXtreme 1.41 in the past....and you do it just like you normally would. Reason it works like that is because the only thing it needs from your previous firmware is the KEY, which is obviously in the firmware you are currently using on your drive or it wouldn't work. So it just extracts the key from your 1.41 just as it would from factory firmware...then uses that key in your new 1.5fw.
So yes...unless something has changed that I am not aware of...you can flash/overwrite your old firmware with the new one just like you did when you went from original to hacked fw.
Thanks, but I tried to load the new 1.5 firmware in iPrep, and it says "Not valid firmware" (or something).
So I can't use iPrep anymore...
Post by: Dead Echo on December 23, 2008, 09:29:00 AM
QUOTE(barzi @ Dec 23 2008, 05:28 PM)
Thanks, but I tried to load the new 1.5 firmware in iPrep, and it says "Not valid firmware" (or something).
So I can't use iPrep anymore...
Exactly my problem ( http://forums.xbox-scene.com/index.php?showtopic=670906 ) also asked a few times in here, no one seems to have an answer.
Post by: Ig0tGAME on December 23, 2008, 09:33:00 AM
QUOTE(barzi @ Dec 23 2008, 11:28 AM)
Thanks, but I tried to load the new 1.5 firmware in iPrep, and it says "Not valid firmware" (or something).
So I can't use iPrep anymore...
That's interesting...I haven't even attempted to try the 1.5fw yet...I assume iPrep may need a minor update then. My 1.41 has been going strong for a long time. I don't think I will change.
Post by: barzi on December 23, 2008, 09:35:00 AM
QUOTE(Ig0tGAME @ Dec 23 2008, 05:33 PM)
That's interesting...I haven't even attempted to try the 1.5fw yet...I assume iPrep may need a minor update then. My 1.41 has been going strong for a long time. I don't think I will change.
May I ask why not to update? And if iPrep get a update, will it work the same way as before(from original to 1.41)? So the main thing is the same, only another file?
Post by: biggy7 on December 23, 2008, 09:39:00 AM
QUOTE(barzi @ Dec 23 2008, 04:28 PM)
Thanks, but I tried to load the new 1.5 firmware in iPrep, and it says "Not valid firmware" (or something).
So I can't use iPrep anymore...
have you put the new 1.5Def files into iprep folder? i posted a link to it a few pages back, have a search!
QUOTE(barzi @ Dec 23 2008, 04:35 PM)
May I ask why not to update? And if iPrep get a update, will it work the same way as before(from original to 1.41)? So the main thing is the same, only another file?
i think it is best to update if you can easily do it, and if you have samsung or benq then just use iprep in the usual way.
Post by: Digital_sin on December 23, 2008, 09:40:00 AM
QUOTE(barzi @ Dec 23 2008, 06:28 PM)
Thanks, but I tried to load the new 1.5 firmware in iPrep, and it says "Not valid firmware" (or something).
So I can't use iPrep anymore...
QUOTE(biggy7 @ Dec 23 2008, 02:40 PM)
iPrep 1.5Def: http://www.megaupload.com/?d=D5OBW7BS
Post by: Iriez on December 23, 2008, 09:49:00 AM
QUOTE(Big_Dave @ Dec 23 2008, 04:22 AM)
BIG thanks to all involved - even the coffee guy!
Can't seem to change JungleFlasher to my SATA port "EFF0" - Any ideas?
You have not correctly installed PortIO32.
QUOTE(ilin @ Dec 23 2008, 04:54 AM)
So awesome, will try this in couple hours. Is there any way i can make donation for such awesome team?
JungleFlasher will be released with a banner for donations. This was intented, but the rush to get this to everyone prevented it. Future versions will have it.
QUOTE(Dead Echo @ Dec 23 2008, 05:07 AM)
Very nice job Team Jungle!
We just need an updated tutorial for newbies like me looking to update his BenQ drive - The old 360mods tutorial have been rendered null and void by various changes apparently.
Yes, im sure someone will update the tutorials to include JungleFlasher. However this is ixtreme like any other ixtreme. You can flash with DosFlash16 or DosFlash32!
QUOTE(paul543 @ Dec 23 2008, 05:14 AM)
is there going to be a new Dos Version of DVDKey? There is a new version for windows and it seems that the current DVDKey dos version doesn't create the dummy.bin file.
Not yet. Soon
QUOTE(Nismo @ Dec 23 2008, 05:21 AM)
Great stuff
What's the best way to update a BENQ with 1.5? Should I be using this new Jungle Tool, or wait for definitions to be updated for the iPrep method?
New definitions are out! Get them here: Download: Updated iPrep Definitions:http://dwl.xboxscene.com/iriez/ixDef_1.5-ixtreme.rar
Post by: chrisdot on December 23, 2008, 09:50:00 AM
Post by: Xenthalon on December 23, 2008, 10:00:00 AM
I just flashed 1.5 over my old 1.4 benq, everything still works, operations on dvds seem a bit smoother now. Great!
Post by: Iriez on December 23, 2008, 10:02:00 AM
QUOTE(antonchigurh @ Dec 23 2008, 05:29 AM)
No good. I just tried to erase my firmware computer froze on me. After reboot liteon drive will not respond. I think its bricked. I was using a via chipset. I hope you guys can help me out.
Manually uninstalling the VIA then deleting the drivers yourself (system32/vmraid.sys) so that windows does not automatically install the card will fix your freezing problems. However, this WILL cause windows to flip out and tell you that you have new hardware every damn boot and 3 seconds
The VIA drivers constantly poll the drive, and this is a issue, especially with erased liteon drives.The liteon is VERY difficult to brick. As long as you dont flash some stupid shit, you can always fix it. It is normal for the drive to not eject after erase!!!
QUOTE(bissmo @ Dec 23 2008, 05:47 AM)
ive got the same problem started erase got 0x72 so i switched it off and on like it says and now its just freazing up on me does this mean its been wiped ..should i just try dos for the flash.... and im using via 6421 card
also the drive will not eject
Yes, try dosflash or the msg above to get it working in windows.
QUOTE(--NZ MODZ-- @ Dec 23 2008, 05:58 AM)
Wicked - I have tried it out and it works a treat, at least at getting the Lite On key - I have been trying all day to get a valid key using the ck3tool_v1.2.4 but kept getting CCCCCC's - then first time using Team Jungle - JungleFlasher I got a valid key!!! Stoked I checked Xbox-scene before bed
Thanks for the effort put into this tool and the firmware, much appreciated.My first attempt wasn't quite 100% successful as I did not know how long to wait before power cycling the drive during the Lite On Erase - and now the drive seems munted, cant eject and not being recognised - so I need to find out whether or not it is salvageable - if I undo the solder connections will it still work? I havent tested it yet. At least I have the valid key, identify and inquiry strings I can flash onto another drive if I have to, but it would be good to get a hacked firmware on the Lite On finally.
Just like the Hitachi 78FK/FL - Took a long time but we got there.
Now lets get these drives to report discs present so we can play games from just the hard drive.
Can anyone offer any help regarding my now non-responding Lite-On? I am using the Xecuter CK3 Pro and USB - no RS232 cable. Have successfully read off keys etc but unable to erase and flash.
Glad to hear the success
The CK3 is not required for flashing. ALSO....xecuter is using dvdkey 0.6. USE THE 0.7 VERSION FOR KEY EXTRACTION!! Just power and sata. It sounds like you are having issues getting your liteon hooked up, and in the correct mode (half tray open) and seeing it on the correct sata port, with PortIO32 installed.QUOTE(cardyology @ Dec 23 2008, 06:22 AM)
First of all let me just say kudos for achieving what they said could not be done. You guysa are seriously skilled
My 360 is rocking a BENQ on ix1.4 spoofed as a liteon in my 360Elite... as Im sure many lite-on users have also.
Will peeps who have replaced their lite on drives be upgrading to 1.5? If so, will it be best to continue to use the spoofed BENQ drive & flash it to this new 1.5 fw or can we go back to our lite-on drives? Is there a "better" one to use? Any advantages/disadvantages to going back to liteon or sticking with BENQ>?
Thanks again guys, this is gonna make my flashed-console-wanting, lite-on-owning friends very very happy this xmas!
YES. Updated to 1.5 ABSOLUTELY. Previous versions of ANY firmware are NOT compatible with spoofing from LiteOn. There is extra security features in 1.5 that relates to cross drive spoofing for liteon that is a MUST.
Post by: BOVA80 on December 23, 2008, 10:08:00 AM
it says invite only.
Post by: barzi on December 23, 2008, 10:09:00 AM
And what are the benifits to update my 1.41 BenQ to 1.5? Is it safer for playing xbox live? I don't really know what the new features meen. And do i have to have the newest iPrep (version 008 beta) to update to 1.5? Because I liked 006 better (I like the dos interface better and I'm used to it).
Post by: ThaBeretta on December 23, 2008, 10:13:00 AM
Post by: bonsc2 on December 23, 2008, 10:14:00 AM
Post by: Chrushev on December 23, 2008, 10:24:00 AM
I read the Key perfectly.. followed the tutorial and flashed.. it flashed and verified the 4 banks (0,1,2,3) and said everything is good to go.
Now the drive wont eject... on the dashboard it says "Ejecting" but it doesnt actually eject.
I did accidentaly connect the pins on the drive board that made the drive eject/go back in, while i was trying to read the key...
how do I fix it so that it ejects the drive properly? I tried both via the button and dashboard with controller.. same problem =/
Edit - yes the Pin3 is connected on the power and everything else is as well.
Post by: offtopic on December 23, 2008, 10:25:00 AM
Post by: k0mpresd on December 23, 2008, 10:26:00 AM
Post by: fayd on December 23, 2008, 10:26:00 AM
Post by: mac456 on December 23, 2008, 09:55:00 AM
QUOTE(offtopic @ Dec 23 2008, 07:25 PM)
When i run JungleFlasher.0.0.26.Beta my computer get crash and freeze. I install PortIO32.
this is also happenin to me, tried on the machine next to me and it works fine with the same file, whats goin on?
Post by: jimbo james on December 23, 2008, 10:36:00 AM
Created firmware to flash, went to erase, then gave a 72 status then nothing... now my Lite-On drive is dead
Can't be detected on SATA channel, in BIOS anything. What gives? Did JungleFlasher kill my drive?
Post by: braveheart43 on December 23, 2008, 10:10:00 AM
QUOTE(mac456 @ Dec 23 2008, 05:31 PM)
this is also happenin to me, tried on the machine next to me and it works fine with the same file, whats goin on?
I am also suffering from FREEZE/Hang, if i power cycle the drive a few times i can get the PC to respond again - I was trying to update to 1.5 on my ms28 - Jungleflasher just does not seem to work for this at all!
I had to manually cx key using firmtool then put file into backups folder on iprep USB and carry out badflash as normal -
My drive is working fine with 1.5 but would have been nice to get jungle flasher working!
was using a VIA card first (and for badflash) but tried jungleflash from onboard SATA - results - no freeze but still couldn't get it to work
"drive reports incorrect status!" (IMG:style_emoticons/default/sad.gif)
Any insights would be great!
Post by: Reaper527 on December 23, 2008, 11:06:00 AM
Post by: heydricas on December 23, 2008, 11:09:00 AM
Post by: ThaBeretta on December 23, 2008, 10:34:00 AM
EDIT: I was unable to find the "vmraid.sys" in my system32 folder, but I did find a "viamraid" file in system32 > drivers folder. Are these the same files?
This post has been edited by ThaBeretta: Dec 23 2008, 06:40 PM
Post by: BOVA80 on December 23, 2008, 11:13:00 AM
Post by: Harry1 on December 23, 2008, 11:19:00 AM
Post by: syph007 on December 23, 2008, 11:27:00 AM
Post by: coedshowers on December 23, 2008, 11:38:00 AM
had my liteon flashed in under 10 min.
now i just have to reflash my spoofed hitachi back to normal..
BTW thought i would add this lil tip...
the casing on a hitachi 0078/79 and the older 0059 are the same.
in case anyone was wanting to send a broke 0078 drive back with a 3rrod console but wanted to keep the good 0059.. say um.. just switch the internals and microsoft sees the origanal 0059 drive in the rrod consol they junk it send you a new liteon etc... the hard part is remembering the casings were switched so write "59dj" on the drive lid ( under where the crome bezel clips ) so its noticable when re-using/flashing the drive..
still waiting on the consol to be shipped back to me so i can flash another liteon w00t!!!
( i've flashed 2 liteons no problems this morning so far and have about another 2-3 coming to me before christmas )
!!all were flashed with ck3 lite ( serial port ), just drop solder 707 and with a via card!!
also before "doign it all manually" as in the tutorial.... just open the jungleflasher everything is there that tutorial will just confuse half the people.. they made the program easy to use and all the tools are there pretty much..
Post by: Antman1 on December 23, 2008, 11:04:00 AM
QUOTE(Harry1 @ Dec 23 2008, 12:19 PM)
Hey got a questions, I got my liteon keys,a nd files dumped from a friend, as I dont have rs232 converter thing, do I still need to use that to flash liteon, or is the sata port fine
the rs232 is only needed to get the files. use those files you have to flash the Lite-On. You can skip the step of extracting the key and spoof data cause you already have it.
QUOTE(ThaBeretta @ Dec 23 2008, 12:10 PM)
Is manually uninstalling the VIA 6421 SATA card and its drivers (system32/vmraid.sys) a surefire solution to the freezing? I really don't want to be stuck using DosFlash as I'm not sure how it works and if my bootable USB is even working.
EDIT: I was unable to find the "vmraid.sys" in my system32 folder, but I did find a "viamraid" file in system32 > drivers folder. Are these the same files?
It sounds like it is erased. Now use Dosflash to reflash the drive. Do this in Dos. Not sure if Dosflash32 will do it or not.
This post has been edited by Antman1: Dec 23 2008, 07:06 PM
Post by: neu318 on December 23, 2008, 11:47:00 AM
Post by: miggidy on December 23, 2008, 11:13:00 AM
QUOTE(Iriez @ Dec 23 2008, 09:52 AM)
Please note that if you have a x64 system, there is not a currently known way to install PortIO to your system! If anyone knows a work-around please feel free to PM me and I will investigate.'
Is this just for operating systems running at 64bit, or does this apply to CPU's as well?
Man this is great stuff, looks like now I have a little project to work on during the holiday break (IMG:style_emoticons/default/beerchug.gif)
Post by: RoboChicken on December 23, 2008, 11:50:00 AM
Post by: tornadog on December 23, 2008, 11:16:00 AM
QUOTE(miggidy @ Dec 23 2008, 07:49 PM)
Man this is great stuff, looks like now I have a little project to work on during the holiday break (IMG:style_emoticons/default/beerchug.gif)
My sentiments exactly!!!
Post by: Chrushev on December 23, 2008, 11:56:00 AM
if I move pin 3 (like out/in) the drive will eject/go in.. and the drive reads both retail and backups.
but the eject button doesnt work =/ wtf =/
So drive is operational.. but wont eject.
i think its perhaps because i did the original flash when it was half way in trying to open and not half way open closed..
how do I fix this =/
i tried reflashing 3-4 times now... each time it says its a success but eject still doesnt work
Post by: reborn2603 on December 23, 2008, 11:58:00 AM
Thanks in advance for any help.
Post by: Ranger72 on December 23, 2008, 11:58:00 AM
Well 7 down and god knows how many more to go.
Great work TJ
Post by: t_mac_ca on December 23, 2008, 12:01:00 PM
Post by: 360lossless on December 23, 2008, 11:25:00 AM
QUOTE(WTFudge @ Dec 23 2008, 02:57 PM)
FF72 is good
If your drive freezes using Jungletool do this:
1) Make a dos boot disk
2)Copy the insides of the 'dos' folder in Ixtreme 1.5
3)Copy your newly made Ixtreme 1.5 file with your own key inserted to it (rename it IX15.bin for ease)
4) Make sure 'l-o-eras.exe' is in there
5)Boot to dos
6)Type 'l-o-eras.exe' followed by the port number you're using. In my case I wrote 'l-o-eras.exe EC00'
EC00 being my port number
7)Keep retrying untill you get a 'FF72' status after the command
8 ) FF72 = Fully erased drive
9)Type 'Dosflash'
10) Should talk some stuff about MTK Vendors and should find any dvd drives present.
11) Keep pressing 'N' untill you come across your Lite-on (Mine was listed as Unknown Drive on port EC00)
12) Press 'Y' when you get to your Lite-on.
13) It should come up saying a number of options talking about 'W for write' , E for Erase etc.
14) Type 'LITEON W'
15) Should come up saying 'Type the file name of the bin you want to flash'
16) Type 'IX15.bin'
17) Wait and it should flash 4 banks (might say erase again aswell)
18 )Wait for a data checksum
Mate, you are a complete star, have had trouble all day, read what you put and going through the logic of it, followed all you said and hey presto, that got the little monster.
If knew ya personally would give you a drink.
Star, thank you
Post by: DaddyLongLegs on December 23, 2008, 11:30:00 AM
QUOTE(Craigsblackie @ Dec 23 2008, 02:14 PM)
Updated my Benq drive, all working great. Dosflash works with absolute ease, never been able to use any of the Windows tools though, they freeze of don't pick up the drive correctly, not a major hassle though - I'm a command line kinda guy.
This is good to know since I plan on using a floppy disk like I've always been doing. Just copy the new firmware to the floppy/USB device with iPrep, and reboot? Then flash as when you did with 1.4?
Post by: qqliudl on December 23, 2008, 12:11:00 PM
Post by: Ave on December 23, 2008, 12:14:00 PM
QUOTE(qqliudl @ Dec 23 2008, 03:11 PM)
Hi guys, I can not download the Ixtreme 1.5, it shows 'Download: IXtreme 1.5 n/a (built with XDK)', no link on it, please help!
Post by: playerman on December 23, 2008, 11:49:00 AM
QUOTE(Iriez @ Dec 23 2008, 07:02 PM)
Manually uninstalling the VIA then deleting the drivers yourself (system32/vmraid.sys) so that windows does not automatically install the card will fix your freezing problems. However, this WILL cause windows to flip out and tell you that you have new hardware every damn boot and 3 seconds (IMG:style_emoticons/default/tongue.gif) The VIA drivers constantly poll the drive, and this is a issue, especially with erased liteon drives.
OMG You are awsome mate.After few atempts(45 minutes (IMG:style_emoticons/default/smile.gif) my lite-on came back to live(with ix1.5 off course ).Thank You very much for you and all jungle team.
Post by: Refferehtom on December 23, 2008, 12:29:00 PM
I'm using an RS232 TTL adapter and having problems extracting it. Hopefully santa brings me a CK3 or the DIY gadget. I really want to flash this bad larry.
Excellent work to the whole team, I've been reading on this everyday since the lite-ons came out.
Post by: tornadog on December 23, 2008, 11:58:00 AM
QUOTE(Refferehtom @ Dec 23 2008, 08:29 PM)
I feel like I'm the only one who doesn't have his key. LOL
I'm using an RS232 TTL adapter and having problems extracting it. Hopefully santa brings me a CK3 or the DIY gadget. I really want to flash this bad larry.
Excellent work to the whole team, I've been reading on this everyday since the lite-ons came out.
waiting on my diygadget too. Hope it comes today
Post by: O_oTheGameo_O on December 23, 2008, 12:35:00 PM
good job!
Post by: jeppe777 on December 23, 2008, 12:52:00 PM
But before that i thought the files were corrupted
so i edited them in note pad like an idiot.Ive saved exactly what DVDkey gave me. any chance could someone tell me how to put it back and make the files like how i had them Please.
C:\Downloads\New #2\Xbox\K810 Firmware\Lite-On\DVDKey32_v0.7
\DVDKey32_v0.7>DIR
Volume in drive C is Windows Vista
Volume Serial Number is E4D1-FA72
Directory of C:\Downloads\New #2\Xbox\K810 Firmware\Lite-
On\DVDKey32_v0.7\DVDKe
y32_v0.7
2008/12/23 07:31 PM <DIR> .
2008/12/23 07:31 PM <DIR> ..
2008/12/09 05:16 PM 10 559 DummyGen.EXE
2008/12/09 04:25 PM 45 056 DVDKey32.exe
2008/09/26 01:49 AM 95 232 PortIO32.exe
2008/10/19 10:38 PM 1 943 ReadMe.txt
4 File(s) 152 790 bytes
2 Dir(s) 12 357 881 856 bytes free
C:\Downloads\New #2\Xbox\K810 Firmware\Lite-On\DVDKey32_v0.7
\DVDKey32_v0.7>DVDKe
y 1CD0 1
'DVDKey' is not recognized as an internal or external command,
operable program or batch file.
C:\Downloads\New #2\Xbox\K810 Firmware\Lite-On\DVDKey32_v0.7
\DVDKey32_v0.7>DVDKe
y32 1CD0 1
Your Indentify String is
0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 44 36 30 38 - 43 47 38 32 38 39 30 38 ....D608CG828908
0020: 30 31 52 33 30 20 20 20 - 00 00 00 00 00 00 34 37 01R30 ......47
0030: 35 38 43 30 20 20 4C 50 - 53 44 20 20 20 20 47 44 58C0 LPSD GD
0040: 31 2D 44 36 53 32 20 20 - 20 20 20 20 20 20 20 20 1-D6S2
0050: 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 00 00 ..
0060: 00 00 00 0B 00 00 00 04 - 00 02 06 00 00 00 00 00 ................
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 E3 00 - 78 00 00 00 00 00 00 00 ..x.x...x.......
0090: 00 00 00 00 00 00 00 00 - 02 02 00 00 68 00 40 00 ............h.@.
00A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
....Saved to Identify.bin
Your Inquiry String is
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 37 34 38 35 30 43 41 30 - 41 31 44 36 30 38 43 47
74850CA0A1D608CG
0030: 38 32 38 39 30 38 30 31 - 52 33 30 20 20 20 00 00 82890801R30 ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
....Saved to Inquiry.bin
This may take 20 seconds
................................
....key looks good !
Your Drive Key is
0000: 16 D8 F3 F9 8C 62 7C EC - A4 54 42 8D FD F8 AB DB .....b|..TB.....
....Saved to Key.bin
C:\Downloads\New #2\Xbox\K810 Firmware\Lite-On\DVDKey32_v0.7
Please help
Post by: vwcr on December 23, 2008, 01:10:00 PM
I read my liteon so i have my key
Went to erase with jungle flasher then my comp froze
Now this drive looks to me to have erased since it wont eject.
Thing is now my computer just keeps hanging when i power the drive on.
Is there away to flash this back now or is it a brick?
Thanks
Post by: The Dude Z on December 23, 2008, 12:36:00 PM
QUOTE(Teun. @ Dec 23 2008, 08:02 AM)
Great Work, Respect for Team Jungle!!
But i've a question about flashing a LiteOn.
If i flash in Windows and it freezes, is my drive bricked after freezing?
Or can i just try to flash it again in Dos?
I couldn't get the Lite-On-Erase in the package to work in windows.
So I downloaded it from xbins and then it erased fine but it imediately locked up the pc after that.
So I turned the 360 on with no response from the bricked drive and booted it into windows and used jungleflash pointed it to the target FW and it was able to find and flash the empty Firmware bank just fine.
So my Lite-on is now flashed and working fine after being bricked.
I tried dosflash after it bricked and had no luck at all but jungleflash worked.
Windows took a while to boot up when it was bricked but I just let it go and it eventually booted into windows.
I was using via 6421L card to get the key and erase but it wouldn't work to flash it after it had been erased so I used my on-board sata and it worked fine.
Post by: caster420 on December 23, 2008, 12:41:00 PM
AMAZING RELEASE EVERYONE! CONGRATULATIONS TO ALL INVOLVED!
Caster.
This post has been edited by caster420: Dec 23 2008, 08:46 PM
Post by: legssmit on December 23, 2008, 01:21:00 PM
Flashed my BenQ to iXtreme 1.5 using DosFlash32 1.3...worked like a charm
Thanks guys !!!
Post by: Chrushev on December 23, 2008, 12:47:00 PM
QUOTE(legssmit @ Dec 23 2008, 12:21 PM)
First of all: great work team, thanks a lot to everyone involved.
Flashed my BenQ to iXtreme 1.5 using DosFlash32 1.3...worked like a charm (IMG:style_emoticons/default/smile.gif)
Thanks guys !!!
i cant figure out dosflash... what is the command? i tried dosflash f 0x0170 1.5ix.bin and it wouldnt go =/
Post by: legssmit on December 23, 2008, 12:51:00 PM
QUOTE(Chrushev @ Dec 23 2008, 09:23 PM)
i cant figure out dosflash... what is the command? i tried dosflash f 0x0170 1.5ix.bin and it wouldnt go =/
I just use dosflash32 (IMG:style_emoticons/default/tongue.gif) has nice buttons, really easy....never failed me
Post by: xbupgrade on December 23, 2008, 01:35:00 PM
Post by: redfive19 on December 23, 2008, 01:38:00 PM
Post by: BenieUK on December 23, 2008, 01:38:00 PM
QUOTE
i cant figure out dosflash... what is the command? i tried dosflash f 0x0170 1.5ix.bin and it wouldnt go =/
0170 (NOT 0x0170)
Post by: paquete on December 23, 2008, 01:42:00 PM
this was my experience: i have windows vista32 and i was having troube with jungle flasher because the window of the program wont open complete and i can only see half the program dont know why but dosnt matter now. i just use good old DOS, i downloaded dvdkey32_v07 and extract my key,inquiry and identify bin and it make my dummy.bin, then proceed to use firmtool to make my hacked liteon ix15, the i make a bootable dos pendrive and put all the files from dos including my liteon ix15, rebbot pc wen to dos and follow guide from DOS and all went great , now i have my liteon flashed and its working perfect son again thak you guys for this amazing work
Post by: barzi on December 23, 2008, 01:46:00 PM
Post by: penfolduk on December 23, 2008, 01:12:00 PM
QUOTE(WTFudge @ Dec 23 2008, 02:57 PM)
FF72 is good
If your drive freezes using Jungletool do this:
1) Make a dos boot disk
2)Copy the insides of the 'dos' folder in Ixtreme 1.5
3)Copy your newly made Ixtreme 1.5 file with your own key inserted to it (rename it IX15.bin for ease)
4) Make sure 'l-o-eras.exe' is in there
5)Boot to dos
6)Type 'l-o-eras.exe' followed by the port number you're using. In my case I wrote 'l-o-eras.exe EC00'
EC00 being my port number
7)Keep retrying untill you get a 'FF72' status after the command
8 ) FF72 = Fully erased drive
9)Type 'Dosflash'
10) Should talk some stuff about MTK Vendors and should find any dvd drives present.
11) Keep pressing 'N' untill you come across your Lite-on (Mine was listed as Unknown Drive on port EC00)
12) Press 'Y' when you get to your Lite-on.
13) It should come up saying a number of options talking about 'W for write' , E for Erase etc.
14) Type 'LITEON W'
15) Should come up saying 'Type the file name of the bin you want to flash'
16) Type 'IX15.bin'
17) Wait and it should flash 4 banks (might say erase again aswell)
18 )Wait for a data checksum
followed this but when i got to step 14 it came up invalid so i just put the letter W in then gave it the bin name it wanted and hey presto it worked
This post has been edited by penfolduk: Dec 23 2008, 09:13 PM
Post by: DimmuJed on December 23, 2008, 01:49:00 PM
I noticed it says things about 'enhanced disc jitter' well the last couple times they tried that, guess what happened? A shitload of people got banned because of it.
Also there are a lot of questions about what is enhanced for drives that aren't Lite-on or spoofs, and NO ANSWERS....
Something seems fishy, or off here. I'll stick with 1.41 till i get confirmation.
Post by: dayvey on December 23, 2008, 01:50:00 PM
I don't have a lite-on and haven't tried this yet, however have the utmost faith that, as always, the jobs a good 'un.
Keep it up boys, and if your ever in my neck of the woods just look me up - i'd buy you boys a pint any day!
Nice one
Post by: The Dude Z on December 23, 2008, 01:14:00 PM
QUOTE(xbupgrade @ Dec 23 2008, 03:35 PM)
I try to do the DOS Lite-On-Erase.exe EC00 and i keep getting "status FFFF" any one know why or how to fix it?
I was getting that same error and an error saying it isn't an internal app/not recognised blah blah blah.
So I downloaded the Lite-On-Erase from Xbins and it erased it the 1st time then promptly locked up my pc.
So I just rebooted and unplugged the sata cable until the windows logo came up and it started to boot into windows then plugged the sata in as it was booting into windows and used jungleflash to write the new FW over to it.
Post by: cragnut on December 23, 2008, 02:14:00 PM
Post by: 360lossless on December 23, 2008, 01:38:00 PM
QUOTE(penfolduk @ Dec 23 2008, 08:48 PM)
followed this but when i got to step 14 it came up invalid so i just put the letter W in then gave it the bin name it wanted and hey presto it worked
Yep it was spot on really, I had to make a few minor changes but hey, this guy saved me one hell of a ball ache.
Mine was as:
USB FLASH DRIVE LITEON FLASHING
-------------------------------
1)Make a dos boot disk
2)Copy the insides of the 'dos' folder in Ixtreme 1.5
3)Copy your newly made Ixtreme 1.5 file with your own key inserted to it (rename it IX15.bin for ease)
4) Make sure 'l-o-eras.exe' is in there
5)Boot to dos
6)Type 'l-o-eras.exe' followed by the port number you're using. In my case I wrote 'l-o-eras.exe DC60'
(L-O-ERAS.EXE DC60)
DC60 being my port number
7)Keep retrying untill you get a 'FF72' status after the command
8 ) FF72 = Fully erased drive
9)Type 'Dosflash'
10) Should talk some stuff about MTK Vendors and should find any dvd drives present.
11) Keep pressing 'N' until you come across your Lite-on (Mine was listed as Unknown Drive on port DC60)
12) Press Number That Corresponds With Lite-on Drive. (In My Case Was '6')
13) It should come up saying a number of options talking about 'W for write' , E for Erase etc.
14) Type 'W'
15) Should come up saying 'Type the file name of the bin you want to flash'
16) Type 'IX15.bin' (If you named file to this, if not to the name of your file)
17) Wait and it should flash 4 banks (might say erase again aswell)
18 )Wait for a data checksum
Without this guy I think my drive would have been kicked up the back yard lol
Post by: evga on December 23, 2008, 02:24:00 PM
JungleFlasher all the way
Oh, what fun it is to flash
In a one Xbox open tray
JungleFlasher, JungleFlasher
JungleFlasher all the way
Oh, what fun it is to say thank you to TEAM JUNGLE.
Thank you
Post by: jagough on December 23, 2008, 02:26:00 PM
Flashed Liteon first go with Jungle Flasher
Thanks to all for your hard work
Post by: Plug on December 23, 2008, 02:27:00 PM
but im stumped on the following.
could someone tell me how to edit my original liteon firmware so that the key from my xbox is added to it..
i dont want to use the key thats already on the liteon drive i want to use my own so that i can swap out my sammy for the liteon drive..
but for the life of me i cant get firmware toolbox to reconise the liteon firmware so that i can spoof it to a samsung ms28 with my ms28 key...
Post by: mat1c on December 23, 2008, 01:57:00 PM
provides plenty of step by step instructions and pictures in their tutorial.
might help some of you out:
http://team-xecuter.com/ck3/liteon_windows.htm
-MATiC
Post by: f575gtc on December 23, 2008, 02:37:00 PM
Post by: jbaruch76 on December 23, 2008, 02:53:00 PM
Post by: matyus on December 23, 2008, 02:55:00 PM
keep getting cant open firmware file
wont open key file either
help pls
Post by: driesken on December 23, 2008, 02:20:00 PM
QUOTE(jbaruch76 @ Dec 23 2008, 10:53 PM)
ok, sorry for the noobish topic, i just don't want to buy anything i don't need. i have gone through all 14 pages and i jsut want to confirm taht i need to buy the ck3 (or maximus xtractor) + the probe (if i don't wnat to solder) in order to complete the flash? i have a via 6421 chipset which is all i needed for previous flashing. i just don't wanna spend $50 if i don't have to. also, what is the difference between the ck3 pro and lite?
The lite is good enough if you have a COM port on your motherboard. The Pro also offers USB support.
You don't have to buy a probe as you can easily make one yourself I heard.. I also need to figure this out how this can be done. Anyone?
Post by: joeyddr on December 23, 2008, 02:21:00 PM
This post has been edited by joeyddr: Dec 23 2008, 10:25 PM
Post by: Apache14 on December 23, 2008, 02:58:00 PM
Post by: DeXteR_CwB on December 23, 2008, 02:23:00 PM
But using the Dvdkey32, JungleFlash not work in my PC.
And at the moment the erase, not see 0x72, here show Status FFFF
I'm opened dosflash32, turn off and turn on ( xtractor ) the drive and show the options to Write.
My motherboard is Soyo K8VM Via
Sorry for my english.. i'm Brazilian.
Thanks Jungle Team !!
This post has been edited by DeXteR_CwB: Dec 23 2008, 10:29 PM
Post by: bikermike69uk on December 23, 2008, 02:36:00 PM
(IMG:http://i62.photobucket.com/albums/h115/streethawkuk/orly.jpg)
another one here for the yes pile.
thanks to the team
Post by: markyk1974 on December 23, 2008, 03:20:00 PM
After I erase the Lite on, my pc doesn't lock up. I flash the firmware with jungle tool but the verification fails. Now my drive does not eject.
I'm asuming that the flashing from dos approach should be the right method for me. Will post the results later.
Peace out and thanks to TEAM JUNGLE
Post by: xbupgrade on December 23, 2008, 03:22:00 PM
Post by: buster1395 on December 23, 2008, 03:41:00 PM
Post by: Aerolite on December 23, 2008, 03:43:00 PM
I got the key out and erased fine. However after erasing I can't find my drive anymore anywhere.
Tried dosflash and it doesent show up. It doesent show up in BIOS either like before.
When I query the port with ck3tool1.2.4 it says incomplete packet write and then shows everything CC CC CC CC...
which is correct since the drive is empty?
When I try to query a different port it says CC CC CC... No device found on this port so ck3tool can access the drive I think..?
I can't eject the drive anymore via CK3 too. I've tried switching CK3 on and off at different points too and doesen't seem to help..
Any ideas??
P.S. I tried manually flashing with dosflash but it wouldn't do it, would just show the help info.
I'm starting to feel hopeless.. Spent hours and hours trying to read the key (problem was I had ck connected through COM11 (doh)) and now I can't flash the damn thing
Thanks in advance.
Post by: xpream on December 23, 2008, 03:45:00 PM
great work, thanks team jungle, c4eva and all the rest involved.
a question for somebody who has flashed a liteon( i have to wait till tomorow to flash one).
i allready installed jungleflasher just to check everything out for tomorow.
can somebody check in the program if it's normal that when nothing connected to the serial port. it doesn't show any com port
just to be sure, and i can't wait to play with it
Post by: dbldown768 on December 23, 2008, 03:09:00 PM
Secondly, it appears that no one has responded to questions similar to the one below? What advantages does the 1.5 fw hold for a samsung M28 user like myself? Does the "if it's not broke don't fix it" come in to play with this version? Is it possible for someone to elaborate a bit more on how this fw benefits all users? I know its early in the announcement and a lot of people will have many questions, I just though it will be hard to search for these answers in what appears to be a 100 page thread.
QUOTE(SonicPower @ Dec 23 2008, 07:05 AM)
Question: For iXtreme 1.4 users, are the added benefits for iXtreme 1.5 significant for an upgrade?
Is there anything glaringly bad in the 1.4 firmware compared to the 1.5 firmware in terms of the C/R timings?
This post has been edited by dbldown768: Dec 23 2008, 11:15 PM
Post by: ssj4android on December 23, 2008, 03:51:00 PM
Post by: xbupgrade on December 23, 2008, 03:57:00 PM
When I try it on:
Windows command prompt
L-O-Eras.exe EC00 I get Status FFFF
Then I try to do it in DOS and I get Status FF80
Now both drives I tried it on go DEAD (wont eject) after I try to do it in DOS, when I did it in windows drives still ejected.
any one know why this is happening?
Post by: keine on December 23, 2008, 03:23:00 PM
Okay, my first question answered. I can just use jungle flasher if I previously got all the .bin's except for dummy.bin and I don't necessarily want to hook up my lite-on again.
Also, thanks so much to the incredibly talented work of everyone involved.
However, my main question is.
Does anyone know now what caused all those previous bannings as of late? Will the new features in the firmware combat whatever happened?
Thanks.
This post has been edited by keine: Dec 23 2008, 11:24 PM
Post by: antonchigurh on December 23, 2008, 03:29:00 PM
Here is what you need to have been before you move on. You need to have a hacked.bin file of your orig.bin file. To do this if you don't have one already.
Open up Jungleflasher you should be on firmware tool 32. If you used xtractor reader to obtain your key select LOAD FROM DUMP FILES tab insert your key, inquiry, identify files. After you select ok a save screen will pop up with dummy as a save name. You can name it whatever you want I chose to use orig its easier to remember. After you type your name save it a folder you you'll remember. Now you should see your key. Next you need to select OPEN TARGET FIRMWARE and select ix15-liteon. You should now see a key that doesn't match yours. Select SPOOF SOURCE TO TARGET tab and now both keys should match. After you are done with that select SAVE TO FILE tab and save as whatever you want. I used hacked. Now create a bootable flash drive using the following link http://www.bay-wolf.com/usbmemstick.htm. After you are done with that download dosflash 1.6 from xbins. Use the following link if you don't have xbins http://www.360mods.net/index.php?name=Down...tails&id=29. After you have finished downloading dosflash 1.6 extract all the files to a folder. Open the folder and copy all the files to your flash drive. Now you need to locate your hacked.bin file and copy this file over as well. Now restart your pc and select your flash drive to boot from first in your bios. If you unsure of how to do this google works really nice. Now you should boot into dos.
1.C:\dosflash
2.searching for atapi drives make sure your xbox 360 is plugged in
3.Select the number for your correct port that your 360 is plugged into
4.Select W
5.hacked.bin
6.If everything went well all banks should be ok.
This is my first tutorial so please don't knowck me to hard if I forgot anything. I'm just trying to help whoever I can. If anyone has anything to add please fell free.
Post by: trent666 on December 23, 2008, 04:08:00 PM
Post by: DaddyLongLegs on December 23, 2008, 04:13:00 PM
Post by: zainday on December 23, 2008, 03:37:00 PM
QUOTE(dbldown768 @ Dec 23 2008, 03:45 PM)
First of, let me say great work. Your hard work is always appreciated.
Secondly, it appears that no one has responded to questions similar to the one below? What advantages does the 1.5 fw hold for a samsung M28 user like myself? Does the "if it's not broke don't fix it" come in to play with this version? Is it possible for someone to elaborate a bit more on how this fw benefits all users? I know its early in the announcement and a lot of people will have many questions, I just though it will be hard to search for these answers in what appears to be a 100 page thread.
I've been waiting since release for the same answer...seen the question asked a few times with no response...seems everyone wants to try and flash and find out results later...like the same issue that tons of people are haven with flashing....light-on people , i understand, its new etc...but for everyone else...whats the benefit of going from 1.4 to 1.5? Hope that someone will answer this question so that it doesn't have to be asked a hundred more times.
If anyone knows....it would be appreciated and prolly save some redundant pages on this topic....
PS THANKS FOR ALL THE HARD WORK GUYS!
Post by: DaddyLongLegs on December 23, 2008, 03:38:00 PM
QUOTE(zainday @ Dec 24 2008, 12:13 AM)
I've been waiting since release for the same answer...seen the question asked a few times with no response...seems everyone wants to try and flash and find out results later...like the same issue that tons of people are haven with flashing....light-on people , i understand, its new etc...but for everyone else...whats the benefit of going from 1.4 to 1.5? Hope that someone will answer this question so that it doesn't have to be asked a hundred more times.
If anyone knows....it would be appreciated and prolly save some redundant pages on this topic....
PS THANKS FOR ALL THE HARD WORK GUYS!
Someone already mentioned a lot of the reading problems the 1.4 had on BenQ's has been fixed up a bit (but not completely taken away). Apparently using the custom firmware on a BenQ drive creates worse load times, but this 1.5 helps fix that somewhat.
Post by: zainday on December 23, 2008, 03:41:00 PM
QUOTE(DaddyLongLegs @ Dec 23 2008, 04:14 PM)
Someone already mentioned a lot of the reading problems the 1.4 had on BenQ's has been fixed up a bit (but not completely taken away). Apparently using the custom firmware on a BenQ drive creates worse load times, but this 1.5 helps fix that somewhat.
Sorry....I should have said I have a samsung...Geuss i should have asked the question in regards to samsung drive benefits from 1.4 to 1.5
Post by: xbox360sexual on December 23, 2008, 04:21:00 PM
Post by: DeXteR_CwB on December 23, 2008, 03:47:00 PM
QUOTE(xbupgrade @ Dec 23 2008, 08:57 PM)
I have a VIA VT 6421L card, I have extracted and modded the lite-on with a Samsung swap now I want to go back and flash the Lite-On drives I have, i did all the steps fine till I get to the Lite-On erase part I keep getting errors:
When I try it on:
Windows command prompt
L-O-Eras.exe EC00 I get Status FFFF
Then I try to do it in DOS and I get Status FF80
Now both drives I tried it on go DEAD (wont eject) after I try to do it in DOS, when I did it in windows drives still ejected.
any one know why this is happening?
Turn on the drive
Open DOSFLASH32
Click YES
Turn-off drive and Turn-ON
WOOALLAA !!
Select WRITE and go HAPPY !!
Here worked
Post by: parat8t9 on December 23, 2008, 04:24:00 PM
QUOTE(DimmuJed @ Dec 23 2008, 03:49 PM)
As everyone rushes to install this, I'm going to sit back and watch a bit.
I noticed it says things about 'enhanced disc jitter' well the last couple times they tried that, guess what happened? A shitload of people got banned because of it.
Also there are a lot of questions about what is enhanced for drives that aren't Lite-on or spoofs, and NO ANSWERS....
Something seems fishy, or off here. I'll stick with 1.41 till i get confirmation.
I concur
Post by: phistyle on December 23, 2008, 04:27:00 PM
Post by: danooch13 on December 23, 2008, 04:30:00 PM
This is gonna be a good holiday.
Post by: parat8t9 on December 23, 2008, 04:33:00 PM
QUOTE(phistyle @ Dec 23 2008, 06:27 PM)
I'm having problems reading my benq drive firmware with iprep. I updated the def. and firmtool to 1.3 and created a bootable usb drive and after clicking yes to resend mtk vender command it's stuck on 0x7F and when I turn on my xbox 360 it goes to 0x80 and stays at that.
Try pressing N when to the first one see if you get a second one. I always get 1 or 2 before my xbox due to dvd drive. Also I dont really use the batch files I just through Dos Flash and firmtool on a bootable thumb drive, dump the firmware use flashtool to patch it then dos flash again to write. Also I haven't used the new dos flash or firm tools yet, may want to try older versions.
Post by: fisk7000 on December 23, 2008, 04:36:00 PM
I have the following Q...
Can I accomplish the whole procedure only with the "Xecuter CK3 Probe", which is like 8£, w/o buying the pro kits or any additional expenses? Thanks
EDIT:
My drive is Lite-On
Post by: BenieUK on December 23, 2008, 04:36:00 PM
QUOTE
Anyone know how to force Vista to use older 5.30c VIA drivers?
Yer put 5.30 drivers in a folder, uninstall old drivers (in device manager), scan for new hardware, if it install driver for you select update driver in device manager, select have disk, point to where you have 5.30 drivers
Post by: xbox360sexual on December 23, 2008, 04:46:00 PM
Post by: xbupgrade on December 23, 2008, 04:56:00 PM
I try to erase the lite-on but it didnt work keep getting FFFF so I try to use JungleFlasher .26 BETA to erase it and after it was done my PC froze, I restarted my PC then I turn Lite-)n drive on and as soon as I do PC freezes again and the drive doesnt eject any more. any help? I will paypal $20 if some one can help me get this working my aim is xbenbonx
I have a VIA card 6421L running windows XP and i have the CK3
Post by: dpbmt on December 23, 2008, 04:59:00 PM
look at the front page...
Post by: CJM1682 on December 23, 2008, 05:05:00 PM
Post by: jpcesar on December 23, 2008, 05:07:00 PM
http://imageshack.us
http://g.imageshack.us/img211/problemsr1.jpg/1/
- im using C3K pro
- i've correctly joined the 2 points (solded, i dont have probe)
- im using windows xp
- i have a gigabyte p45 motherboard with ICH10 sata controller
- iprep tells me "unable to find any devices"
ill pay USD $10 by paypal to any clue that will solve my problem
thanks
Post by: manu_xl on December 23, 2008, 05:11:00 PM
Post by: radyboysmith on December 23, 2008, 05:19:00 PM
i have a via6421a and the same thing happened to my drive. it became lifeless . it wouldnt eject , the tray stayed half closed even when i turned it off and on a few times .
i thought i bricked it.
i was also trying a spoof the liteon to a benq. i was also using jungle flasher to erase the liteon.
i got x72 but then it became lifeless.
- so i turned the whole 360 off for a couple of minutes,
- closed all applications got to do with liteon flashing.
- turned on the 360
- opened up dosflash32
- it then found my drive
- clicked "write"
- chose my dummy file
- vaoila(i dont know how to spell it, lol)
- my drive was back
and flashing to benq worked .
to spoof as benq, you need to first ;
- get key.bin and inquiry.bin for benq(using jungleflash)
- delete key.bin and inquiry.bin of liteon
- copy key.bin and inquiry.bin of benq into that folder
- you should now have a]key.bin(benq) b]inquiry.bin(benq) c)identify.bin(liteon)
- make dummy file using jungleflasher
- use firmtool with dummy file as source and ix15-liteon.bin as hacked
- should get key copied and something else copied , and you should get a warning!!!
- its o.k. just flash with dosflash32
done.
Post by: BenieUK on December 23, 2008, 05:22:00 PM
QUOTE
Vista tells me "it has determined the best drivers are already installed"
When you uninstall via card in device manager make sure you put tick on to remove driver from disk/computer, also when asked make sure to select HAVE DISK and browse to where your 530 drivers are
Post by: sekone on December 23, 2008, 05:23:00 PM
will we be able to restore original liteon firmware?
thanks,
sek
Post by: bikermike69uk on December 23, 2008, 05:23:00 PM
QUOTE(jpcesar @ Dec 24 2008, 01:07 AM)
I'm having a problem:
http://imageshack.us
http://g.imageshack.us/img211/problemsr1.jpg/1/
- im using C3K pro
- i've correctly joined the 2 points (solded, i dont have probe)
- im using windows xp
- i have a gigabyte p45 motherboard with ICH10 sata controller
- iprep tells me "unable to find any devices"
ill pay USD $10 by paypal to any clue that will solve my problem
thanks
dont know for sure but try the primary sata port, your screenshot shows you using the secondary port
scrub that, its late and didnt read it properly. it found 4 drives? try disconnecting all but your boot up hdd
Post by: DWilli on December 23, 2008, 05:25:00 PM
Post by: staind691 on December 23, 2008, 05:26:00 PM
Post by: radyboysmith on December 23, 2008, 05:31:00 PM
you get that message when you havent done the half tray thingy or your serial cable not done right .
i used a max3232 adapter from ebay and a bit of soldering of those points , Rx , Tx , ground and +3.3 power.
also join 707 must be done to drive.
Post by: SimianEtza on December 23, 2008, 05:33:00 PM
haha you guys deserve all the kudos in the world. <333333
Post by: ZakMcRofl on December 23, 2008, 05:49:00 PM
QUOTE(Iriez @ Dec 23 2008, 06:02 PM)
Glad to hear the success
The CK3 is not required for flashing. ALSO....xecuter is using dvdkey 0.6. USE THE 0.7 VERSION FOR KEY EXTRACTION!! Hey Iriez could you please elaborate? I used CK3 1.2.4 for the key extraction. Am I at risk or why do you discourage the use of dvdkey 0.6 / CK 1.2.4.
Post by: Tron[ADS] on December 23, 2008, 05:52:00 PM
Mine (hooked up to a 6421A) returned FF80 maybe 15 times. I figured by then it wasnt going to give me the correct response, so I figured Id try it anyway. I power cycled the PC and the Lite-on, at which point it wouldnt eject (as expected). I then ran Dosflash chose the correct port, selected W, pointed it at a:\ix15.bin and after that it gave me an Erasing, then Erase Successful type message, then flashed banks 0-3 and finished.
The drive now ejects ok, but I dont have a 360 to test it in just now....Im sure its fine though.
My question (apart from how many times should I be attempting erase), is , are there any specific points in time to power cycle the drive, or even an apropriate time to switch the drive on in the first place.
Seems its difficult to brick these drives, so Im going to expiriment further now...but it would be useful to see how many times others using DOS are having to fire the l-o-erase command at it.
Post by: snmp on December 23, 2008, 05:57:00 PM
use dosflash to erase and flash the drive
i got ffff as status like 100 times
it erased the first time on dosflash and flashed properly
u will know if it workd when u flashed the drive, the green center led will remain solid, and the drive will eject again.
Post by: Tron[ADS] on December 23, 2008, 06:01:00 PM
QUOTE(snmp @ Dec 24 2008, 02:57 AM)
dont use l-o-eras
use dosflash to erase and flash the drive
i got ffff as status like 100 times
it erased the first time on dosflash and flashed properly
u will know if it workd when u flashed the drive, the green center led will remain solid, and the drive will eject again.
Im not sure why they would have provided l-o-eras.exe in the DOS folder if it wasnt required though ?
Did you just use the W command in dosflash, or the seemingly more lite-on specific ones ?
Does dosflash detect that the drive isnt erased and only erase if required ?
Post by: toneedo on December 23, 2008, 06:11:00 PM
To the guy that got the key.bin and inquiry.bin from a benq drive for spoofing, did you just run dvdkey? What if i dont have the original benq drive and only got the drive key as txt, how do i convert that txt to a valid key.bin to use with jungle?
Post by: caster420 on December 23, 2008, 06:17:00 PM
QUOTE(ZakMcRofl @ Dec 23 2008, 07:49 PM)
Am I at risk or why do you discourage the use of dvdkey 0.6 / CK 1.2.4.
DVDKey32 0.7 issues more requests to the drive to allow for the ixtreme lite-on fw to be patched with as much original information as possible. This is why it is recommended, along with JungleFlasher, for retreiving your key.
Caster.
Post by: uron1000 on December 23, 2008, 06:18:00 PM
One quick question got a lot of brandnew liteon drives which i've replaced can i spoof them to read as Sammys/Hitachi/Benq ? be good to know as i have a load of brand new spare drives i can use in that case. Yippee!! I would think it shouldn't be to hard now?
Post by: toneedo on December 23, 2008, 06:28:00 PM
QUOTE(uron1000 @ Dec 23 2008, 05:18 PM)
one word guys AWSOME!!! Merry Christmas
One quick question got a lot of brandnew liteon drives which i've replaced can i spoof them to read as Sammys/Hitachi/Benq ? be good to know as i have a load of brand new spare drives i can use in that case. Yippee!! I would think it shouldn't be to hard now?
As long as you can get the original drive key in .bin form, yes u can spoof using jungle. Im stuck at the part where u get the key.bin from a txt file.
Post by: snmp on December 23, 2008, 06:31:00 PM
it wasnt uploaded untill later on, it wasnt included with the package
or dosflash32, lol
probably still too buggy to release to noobs, who are erasing drives before they dump the keys, lol
dosflash erase erased my drive perfectly
it was suggested to me last night in #fw when l-o-eras wasnt working
remember half this software is BETA lol
and you should use what works, everyone who has flashed many already like myself, 5 before 7am this morning, have tested all. Turns out the only way to turn your liteon into a brick is to not dump the keys and files correctly. if youve done that, the drive erases and writes just fine.
QUOTE(toneedo @ Dec 24 2008, 02:28 AM)
As long as you can get the original drive key in .bin form, yes u can spoof using jungle. Im stuck at the part where u get the key.bin from a txt file.
what are u using to dump keys.
Post by: xbupgrade on December 23, 2008, 06:32:00 PM
Post by: uron1000 on December 23, 2008, 06:36:00 PM
QUOTE(toneedo @ Dec 24 2008, 03:28 AM)
As long as you can get the original drive key in .bin form, yes u can spoof using jungle. Im stuck at the part where u get the key.bin from a txt file.
You should just be able to open the bin file in Firmware toolbox 4.8 and just replace the key from your text file
I have CK3 + probe to dump key.bin and enquiry.bin
QUOTE(xbupgrade @ Dec 24 2008, 03:32 AM)
I bricked 3 lite-on drives they wont eject but I flashed the 4th one right, any one know how to unbrick it???
Try to erase drive and reflash
Post by: snmp on December 23, 2008, 06:38:00 PM
there really isnt a txt file, there should be key.bin inquiry.bin identify.bin
then u can use jungleflasher to make firmware
Post by: aidux on December 23, 2008, 06:40:00 PM
Post by: uron1000 on December 23, 2008, 06:43:00 PM
QUOTE(snmp @ Dec 24 2008, 03:38 AM)
yeah shouldnt have any probs dumping the keys if you have correct tools
there really isnt a txt file, there should be key.bin inquiry.bin identify.bin
then u can use jungleflasher to make firmware
lovely gonna try and spoof a liteon as a sammy MS25 later to see how that goes i#ll post to let you all know.
P.s
Glad to be here much more active and friendly ppl
QUOTE(aidux @ Dec 24 2008, 03:40 AM)
can someone make video tutorial how to do all work?what equipments do you need to do all the work?
try this mate http://dwl.xbox-scene.com/iriez/lite-on.dosflash32.tutorial.pdf
Post by: caster420 on December 23, 2008, 06:49:00 PM
QUOTE(uron1000 @ Dec 23 2008, 08:18 PM)
One quick question got a lot of brandnew liteon drives which i've replaced can i spoof them to read as Sammys/Hitachi/Benq ? be good to know as i have a load of brand new spare drives i can use in that case. Yippee!! I would think it shouldn't be to hard now?
Yes, spoofing is already supported by JungleFlasher and firmtool.
Caster.
Post by: aidux on December 23, 2008, 07:00:00 PM
QUOTE(uron1000 @ Dec 24 2008, 03:43 AM)
lovely gonna try and spoof a liteon as a sammy MS25 later to see how that goes i#ll post to let you all know.
P.s
Glad to be here much more active and friendly ppl
try this mate http://dwl.xbox-scene.com/iriez/lite-on.dosflash32.tutorial.pdf
srry i got windows Vista is there any tutorial for vista? where can i buy spear or KC3 kit?
Post by: jc123rules on December 23, 2008, 07:02:00 PM
Post by: wes302 on December 23, 2008, 07:03:00 PM
i would like to donate to teamjungle. is there a way?
Post by: B01070 on December 23, 2008, 07:05:00 PM
QUOTE(antonchigurh @ Dec 24 2008, 04:35 AM)
Here is a quick tutorial
Here is what you need to have been before you move on. You need to have a hacked.bin file of your orig.bin file. To do this if you don't have one already.
Open up Jungleflasher you should be on firmware tool 32. If you used xtractor reader to obtain your key select LOAD FROM DUMP FILES tab insert your key, inquiry, identify files. After you select ok a save screen will pop up with dummy as a save name. You can name it whatever you want I chose to use orig its easier to remember. After you type your name save it a folder you you'll remember. Now you should see your key. Next you need to select OPEN TARGET FIRMWARE and select ix15-liteon. You should now see a key that doesn't match yours. Select SPOOF SOURCE TO TARGET tab and now both keys should match. After you are done with that select SAVE TO FILE tab and save as whatever you want. I used hacked. Now create a bootable flash drive using the following link http://www.bay-wolf.com/usbmemstick.htm. After you are done with that download dosflash 1.6 from xbins. Use the following link if you don't have xbins http://www.360mods.net/index.php?name=Downloads&file=details&id=29. After you have finished downloading dosflash 1.6 extract all the files to a folder. Open the folder and copy all the files to your flash drive. Now you need to locate your hacked.bin file and copy this file over as well. Now restart your pc and select your flash drive to boot from first in your bios. If you unsure of how to do this google works really nice. Now you should boot into dos.
1.C:\dosflash
2.searching for atapi drives make sure your xbox 360 is plugged in
3.Select the number for your correct port that your 360 is plugged into
4.Select W
5.hacked.bin
6.If everything went well all banks should be ok.
This is my first tutorial so please don't knowck me to hard if I forgot anything. I'm just trying to help whoever I can. If anyone has anything to add please fell free.
Good work mate... It will sure help the starters...
Aru
Post by: Chrushev on December 23, 2008, 07:13:00 PM
Post by: Tron[ADS] on December 23, 2008, 07:26:00 PM
So on this reflash, I again got nothing other than FF80 on the l-o-eras.exe command. This time I sent it 50 times. I again power cycled the drive, and find that eject had stopped working, so I do think that something has been erased, if not everything. I then again used dosflash as before, selecting W, and again it stated it was erasing before it flashed banks 0-3, and after another power cycle of the drive, it started ejecting again.
So it looks like Im not going to get any joy with l-o-eras, but it also looks like it doesnt seem to matter.
Im still not entirely comfortable with it....somethings not right with l-o-eras not working.
Post by: VanydotK on December 23, 2008, 07:33:00 PM
I was able to get this to work in Windows with my VIA 6421 card. I unisntalled the drivers and followed the directions and what do you know, it worked. I did have to close and reopen jungle flasher after reading the key to get the lite-on drive to erase and write.
Post by: davree on December 23, 2008, 07:33:00 PM
I have a couple of issues, I have Key.bin, Inquiry.bin and Identity.bin, so I went to Jungleflasher and hit firmware tool 32 and created the lite-cfw.bin.
I then went to MTK Flash 32, changed the port to FE00 (sata port with liteon connected and powered) hit Lite-on-erase got the warning message saying am I sure, hit ok, then got the message:
when erase complete vendor intro will be sent.
Power drive off then on in quick succession, Once!
Drive should return status 0x72 and a good device id
Do you wish to proceed.
I hit yes and got the following:
Sending Lite-On-Erase request to port 0xFE00
Drive returned Status 0x51
--------------------------------------------------
Device Intro Failed
Now my drive cannot be recognised and when I power on my 360 the green led just flashes.
Have I bricked my drive somehow? I have tried with two Pc's with the same results one using Nvidia sata controller and one using VIA.
I just don't know what to do now, any help would be much appreciated.
Thanks in advance
davree
Post by: kipper2k on December 23, 2008, 07:45:00 PM
QUOTE(xbupgrade @ Dec 24 2008, 02:32 AM)
I bricked 3 lite-on drives they wont eject but I flashed the 4th one right, any one know how to unbrick it???
I bricked mine using dumb via 6421, i used dosflash to write the ix15-liteon.bin file back to the drive, and then restarted the process in jungleflash making sure i replaced the key.bin and inquiry .bin with the correct files and it worked fine
Post by: echto on December 23, 2008, 07:54:00 PM
Post by: booogieboy on December 23, 2008, 08:00:00 PM
QUOTE
A new DosFlash will be released very shortly that will include LiteOn DVDKey extraction and dummy.bin capabilities. Note that firmtool uses dummy.bin to correctly spoof information from dumped key/inquiry/identify into other 1.5 firmwares. At this moment JungleFlasher and DVDKey32 support the dummy.bin feature!
does this mean you will be able to retrieve your key with this?
Post by: maxxximus on December 23, 2008, 08:01:00 PM
Post by: AlvinDSM on December 23, 2008, 08:18:00 PM
Used iPrep method
Post by: xbupgrade on December 23, 2008, 07:54:00 PM
QUOTE(uron1000 @ Dec 23 2008, 05:36 PM)
Try to erase drive and reflash
I did try to erase it wont let me, it let me flash the drive but it wont read any games, i got it t eject. any ideas?
Post by: WA7ER on December 23, 2008, 08:01:00 PM
Post by: Nailed on December 23, 2008, 08:09:00 PM
However, one of the 360s has a wierd problem... it cannot read DVD movies or music CDs... anyone ever encountered that issue?
Post by: martymar160 on December 23, 2008, 08:51:00 PM
im so excited i dont even know where to start this is my first time even try to attempt suck a hack and im lost
im readin this threw many times in order to get this right
i hope whne i bump into problems you guys will be willin to help
this is exciting
Post by: Naan_H on December 23, 2008, 09:04:00 PM
just wanna say thanks to team jungle for sorting this out. I just managed to flash mine and seems to be good so far. used the jungleflash software in the end...was really simple and 360pathces guide which made it a doddle..
Looks like i got a few to do now for friends.....
Post by: sekone on December 23, 2008, 09:06:00 PM
Post by: DeepUnder on December 23, 2008, 09:12:00 PM
One Q - is it still the same way to flash the Benq drive using the latest dosflash
Post by: woody21_1 on December 23, 2008, 09:13:00 PM
using a via 6421a pci card and ck3 + home made probe (reincarnated multimeter probe)
i could not flash in windows as my pc kept locking up, i have the portio drivers installed but think i need to try it on a fresh install of xp.
i attempted the erase in windows and it had not fully erased as the drive tray was unresponsive, so used the dosflash package included to erase and flash
i left the tray in the half open position when i attempted to flash in windows, after that the tray wouldnt open or close until, i dont know if tray position makes a difference for erasing or flashing.
i like the way this liteon drive loads backups and its not loud either at 12x
great work from the team... thanks all involved
Post by: matt_cooper_1987 on December 23, 2008, 09:19:00 PM
its a new one...
bollocks
Post by: rb2000 on December 23, 2008, 09:45:00 PM
Post by: zainday on December 23, 2008, 09:15:00 PM
If anyone knows....answer would be greatley appreciated.....
If any samsung users have gone from 1.4 to 1.5, have you noticed any difference?
Also saw guy posted DVD and CD not working with his 1.5 flash....Do others have the same issue or has anyone confirmed that they read and work properly?
Let me know!
Thanks!
Post by: mrwiw on December 23, 2008, 10:52:00 PM
and if i need the hardware what the best one to use?
thanks
Post by: NicePants on December 23, 2008, 11:01:00 PM
l-o-eras.exe kept returning 80, just erased/wrote with dosflash.
took a little fiddling but everything worked out, tested fine.
Post by: tornadog on December 23, 2008, 11:10:00 PM
Post by: xboxmoddude on December 23, 2008, 11:52:00 PM
Post by: keystroke on December 24, 2008, 12:14:00 AM
couldn't of been any easier.
Post by: tornadog on December 24, 2008, 12:15:00 AM
Post by: apextreme on December 24, 2008, 12:17:00 AM
original games work fine, but when i tried to run my backup of gtaiv it stucks in the first white letters
what do you think?
Post by: luciano360 on December 24, 2008, 12:27:00 AM
Post by: Nailed on December 24, 2008, 12:21:00 AM
QUOTE(apextreme @ Dec 24 2008, 07:17 AM)
flashed liteon 1.5.
original games work fine, but when i tried to run my backup of gtaiv it stucks in the first white letters
what do you think?
I'd guess your disk is damaged, or your previous firmware (if you had one) was of a slower speed that allowed it to read better (afaik, 1.5 is always 12x). I'd try making a new backup.
Post by: drowsy on December 24, 2008, 01:02:00 AM
What about if i have a benq and want it to be hacked and leave it as a benq ? Are there any reasons why I should swith from 1.4 to 1.5 ?
Thanks!
Post by: deilzfcjk on December 24, 2008, 01:29:00 AM
Post by: seanhassars on December 24, 2008, 01:32:00 AM
Post by: Mirkec23 on December 24, 2008, 02:04:00 AM
Greetings from Croatia!
Post by: ilin on December 24, 2008, 02:05:00 AM
Post by: gaatjenixaan on December 24, 2008, 01:46:00 AM
QUOTE(seanhassars @ Dec 24 2008, 09:32 AM)
So I can see the drive detected in my BIOS during startup. I can even select it as a bootable drive, yet dosflash says I have no ATAPI devices, and nothing is detected if I try through windows. I'm not using a VIA card. I'm using the onboard ICH9 sata ports on my motherboard. I've tried all 4 and I get nowhere. If anybody can help me I'd appreciate it.
same here, vista? on my pa's pc (ich7 and win xp) it works. but in my pc, also ich7 and vista, it only views up in bios. i have al drivers installed etc etc.
Post by: PsYcHo-NZ on December 24, 2008, 01:50:00 AM
great Xmas present!! I have used the windows GUI that was created by you guys I stuck with iPrep101 v6 as it works great for me but look forward to using it in the future!!Thanks x100 and MERRY XMAS!! Happy New Year to you all also!
Post by: toneedo on December 24, 2008, 02:36:00 AM
QUOTE(uron1000 @ Dec 23 2008, 05:36 PM)
You should just be able to open the bin file in Firmware toolbox 4.8 and just replace the key from your text file
Doesnt work with firmware toolbox, the key.bin is only 1k file size and it pops up an error saying firmware not supported when you open it in fwtb.
QUOTE(snmp @ Dec 23 2008, 05:31 PM)
what are u using to dump keys.
The keys that i have for my benq drives where dump with dosflash, read within firmware toolbox, and saved key as .txt
Post by: bossete on December 24, 2008, 02:42:00 AM
Firmtool 1.3 works only on 32bit system. :/
The same for JungleFlasher.
Thanks
Post by: RayTwoOneThree on December 24, 2008, 02:21:00 AM
Post by: jameswalker on December 24, 2008, 02:56:00 AM
Post by: aidux on December 24, 2008, 03:10:00 AM
Post by: gui1e on December 24, 2008, 03:36:00 AM
QUOTE(matyus @ Dec 23 2008, 09:55 PM)
wont work for me
keep getting cant open firmware file
wont open key file either
help pls
This happens to me too on Vista 32 bit and jungle flasher, Is there any other way of generating the liteon fw without using jungle flasher?
Post by: BenieUK on December 24, 2008, 03:45:00 AM
QUOTE
This happens to me too on Vista 32 bit and jungle flasher, Is there any other way of generating the liteon fw without using jungle flasher?
Put your key.bin etc in same folder as DVDKey32 v0.7 then double click the DUMMYGEN.EXE, then use FIRMTOOL v1.3
Post by: Iriez on December 24, 2008, 04:07:00 AM
QUOTE(matyus @ Dec 23 2008, 09:43 AM)
i only have the key.bin and Inquiry.bin for my lite on but i dont have identity.bin (i used dvdkey32 to get the files) but that never gave me the identity one
is there any way i can get this file do i realy need it
can i just flash my liteon without this file added to ixtreme fw and will it work
thanks and great job guys
No, you absolutely NEED identify.bin. Re-run dvdkey.
QUOTE(mad473 @ Dec 23 2008, 09:44 AM)
-Ive already dumped the key using ck3tool. Can i use those dumps in DOS or do i have to dump the key again in DOS or something ?
CK3 uses dvdkey 0.6. that does not support everything you need. You will need to re-dump using any of the new tools out.
Post by: gotloveforall on December 24, 2008, 04:28:00 AM
Who's a Noob? Me.
Who got his first 360 today? Me.
Who had his Maximus 360Xtractor Tool and Spear Ready? Me.
Who took apart his shiny new 360 without a cinch? Me.
And...
Who Flashed his Lite-On without a single mishap. Me!
positive notes:
-All the above.
not so positive notes:
-My Min Pin just now chewed through my Halo 3, Gears Of War 2 and Far Cry 2 backups.
-Microsoft had security stickers all over the drive and alum sticker connecting the board to the drive.
-It is now 5:26am
-I have work at 8:00am
I Love you guys (and gals).
^^goes out to all the hacking and dev community.
Post by: fisk7000 on December 24, 2008, 04:30:00 AM
Can I only buy CK3 Probe tool, or I must also have the CK3 pro/Lite version? I am trying to flash my Lite-On?
Post by: biggy7 on December 24, 2008, 04:37:00 AM
QUOTE(fisk7000 @ Dec 24 2008, 12:06 PM)
Can I have this answered, please?
Can I only buy CK3 Probe tool, or I must also have the CK3 pro/Lite version? I am trying to flash my Lite-On?
the probe is an add on to the CK3 kit, so you need both dude
Post by: penfolduk on December 24, 2008, 04:45:00 AM
QUOTE(gui1e @ Dec 24 2008, 11:12 AM)
This happens to me too on Vista 32 bit and jungle flasher, Is there any other way of generating the liteon fw without using jungle flasher?
put the firmware files in the jungleflasher folder in fact put all the files you need in junglefasher folder
Post by: mad473 on December 24, 2008, 04:50:00 AM
QUOTE(Iriez @ Dec 24 2008, 01:43 PM)
CK3 uses dvdkey 0.6. that does not support everything you need. You will need to re-dump using any of the new tools out.
Can you please suggest a good one for DOS ?
-also is ntfs4dos a good program for flashing 360 ?
(man, this whole thing has been doing my head in, 24+ hrs later and im still lost lol)
Post by: barzi on December 24, 2008, 04:59:00 AM
And what is the safest method: JungleFlasher, Dosflash 1.6 or 1.7beta (new on xbox-scene)?
Post by: PsYcHo-NZ on December 24, 2008, 05:30:00 AM
QUOTE(barzi @ Dec 24 2008, 06:09 AM)
Thanks!
And what are the benifits to update my 1.41 BenQ to 1.5? Is it safer for playing xbox live? I don't really know what the new features meen. And do i have to have the newest iPrep (version 008 beta) to update to 1.5? Because I liked 006 better (I like the dos interface better and I'm used to it).
Hey mate, you can use iPrep 006 to do this... I have done it today, I like 006 much better also! I dont really understand the benefits of upgrading either but figured hell i'm on holiday with not to much to do so why not upgrade?
Post by: balbaid on December 24, 2008, 05:34:00 AM
Went to windows to do the flashing using Jungleflasher with no problems at all.
I'm using VIA chipset.
I forgot to say big thanks to team jungle.
Post by: ConfusedMan93 on December 24, 2008, 05:50:00 AM
Oh, and another quick question. If i already have the inquiry/identity/key,bin files from my lite on, do i need a spear or any solcering or can i do it all by SATA?
Thanks!,
Post by: PsYcHo-NZ on December 24, 2008, 05:57:00 AM
QUOTE(DaddyLongLegs @ Dec 24 2008, 12:13 PM)
If I have an already flashed BenQ 1.4 I just use this firmware as normal? I mean do I have to use thing Jungle software thing? Can I just put this 1.5 firmware on a floppy disk and update like I did before? You know the whole dben fben DOS routine?
You can use the old method... It works fine.
Post by: Contacto on December 24, 2008, 06:02:00 AM
Post by: rb2000 on December 24, 2008, 06:15:00 AM
Post by: m3kal on December 24, 2008, 06:30:00 AM
Post by: micflair on December 24, 2008, 06:41:00 AM
QUOTE(ConfusedMan93 @ Dec 24 2008, 01:26 PM)
hey guys. Iv got a samsung ms28 drive spoofed as a lite on (ixtreme 1.4). How would i go about updating this?
Oh, and another quick question. If i already have the inquiry/identity/key,bin files from my lite on, do i need a spear or any solcering or can i do it all by SATA?
Thanks!,
You can use the .bin files you mentioned there mate to create the dummy.bin using jungleflasher, then hack it. Erase the fw and flash the lite on with the hacked.bin and throw it back in the 360 and away you go..
Post by: ARJ7656 on December 24, 2008, 07:59:00 AM
QUOTE(PsYcHo-NZ @ Dec 24 2008, 08:06 AM)
Hey mate, you can use iPrep 006 to do this... I have done it today, I like 006 much better also! I dont really understand the benefits of upgrading either but figured hell i'm on holiday with not to much to do so why not upgrade?
Same situation here. Wondering if I should upgrade. I dont see the reason for it yet. I think im gonna wait till Hitachi owners get thier fw too before I upgrade all my systems.
Post by: nanab on December 24, 2008, 08:05:00 AM
Post by: DaddyLongLegs on December 24, 2008, 08:06:00 AM
QUOTE(drowsy @ Dec 24 2008, 09:02 AM)
I have one question, are the new 1.5 firmwares only useful if I want to spoof a samsung or benq into a lite-on?
What about if i have a benq and want it to be hacked and leave it as a benq ? Are there any reasons why I should swith from 1.4 to 1.5 ?
Thanks!
Apparently the 1.4 and 1.41 firmwares for the BenQ made games have crappier read times, GTA4 being the best example. This newer firmware is supposed to help fix the problem, though not entirely. Read times should be improved.
Post by: ThaBeretta on December 24, 2008, 08:48:00 AM
QUOTE(m3kal @ Dec 24 2008, 09:06 AM)
Ok my first flash attempt of the liteon worked in windows no problem with jungleflasher great, 2nd try with another liteon it just freezes after erase like other people have said, anyway if i were to remove the via driver 6421, this may stop the freeze because of installing the port32 i/o driver which i already have anyway, but what i was wondering would it stop me gettting key from benq or sammy drives ??
From what I've heard, deleting the VIA 6421 driver which is located in your Windows > System32 > Drivers folder under the name "viamraid" will solve your freezing issue. However, there will be an annoying "Found New Hardware" every 3 seconds and reboot. Shouldn't matter because once you're done flashing the Liteon you can just reinstall the drivers to use with other drives.
Post by: sadalius on December 30, 2008, 10:46:00 AM
Maybe this will help someone having similar troubles.
Post by: podger on December 30, 2008, 12:50:00 PM
Post by: tezza192 on December 30, 2008, 01:37:00 PM
PS - ensure you use the latest version of Firmtool v 1.3.1
Regards
tezza192
Tutorial
Post by: deilzfcjk on December 30, 2008, 05:36:00 PM
Only hiccup I had was when I did the erase for the liteon in the mtkflash32 section of JF.
I got that "Be patient my young padwann" errror message. I must admit it's amusing. To get that sorted just make sure you're not intoxicated like i was at that time. I didn't see the "LiteOn Erase" button so I accidentally pushed the other Erase button. No harm no foul though. Because all you get is that Padwan message.
Post by: kimtuomi on December 30, 2008, 06:44:00 PM
Post by: jbaruch76 on December 31, 2008, 06:58:00 PM
edit: works fine when plugged into 360
Post by: XPunked on January 02, 2009, 10:05:00 PM
Followed the tutorial, and it worked like a charm... except at the very end the verify failed!!! It still plays my GOW2 stealth backup just fine though, so I'm not complaining
Could be a bug that needs fixing.Using on board VIA8237, didn't need to disable RAID drivers, didn't need to install portio32 as it was already installed for "mode_b_portio32" app.
Anyone know a tutorial for flashing BenQ,Samsungs and Hitachi's with this app?
PS. Used JF to get a 79 Hitachi into ModeB easily, but couldn't get the 79unlock (.wav) function to work, used the old fashioned way instead.
Post by: robx46 on January 02, 2009, 10:16:00 PM
QUOTE(jbaruch76 @ Dec 31 2008, 09:34 PM)
hello, running into a couple of problems here. first, jungle flasher is not recognizing my com port although it is listed just fine in my device manager. also, i did something sutpid and plugged the power from my ck3 into the dvd drive and it fried something a little bit and now the eject button doesn't work. any advice on either of these problems? i am about to reconnect the dvd drive to the xbox to see if it is damaged.
edit: works fine when plugged into 360
Sorry to tell you that you might be screwed. I did the same thing to a drive with CK3. I guess I was getting a little overconfident since I'm not a noob with these things, and forgot to take the time to make sure the power cable was right side up. Btw, it is hard to tell, you really need to look close to make sure you got it right. And for those that say the plug won't go in upside down without pushing really hard, that just isn't true. Went in easy for me, which made me assume it was in right, then POOF! Both CK3 and drive got fried!
Luckily, I could easily see the problem with the CK3 (gold plating blew off) and just bridged that connection, & easily fixed the CK3 (thank god!).
In your case, if you are really lucky, maybe just the CK3 is bad and not the drive. Inspect the CK3, should be an easy repair if you have soldering tools. If the CK3 is OK and still problems, then it might be game over.
I tried everything to fix my drive, doing all sorts of jumps and trying every trick in the book. In the end I just needed to accept that the chip just got way too hot, end of story.
Sounds like the same thing happened to you jbaruch. I had the same problem here. After repairing the CK3 and confirming that it was working normal again, my drive (liteon) was dead as could be. It wouldn't eject at all.
Every now and then I could hear some weak motor spinning, but with that severe heat came off the chip. Also despite trying a ton of power cycles, different ports, and other stuff...my drive just wasn't being recognized by my comp.
No eject + drive not being seen = bad news!
If you are still trying to save the drive, pay close attention to the chip cuz it can get super hot when there is problems and if it does you lose any hope of saving the drive. Besides, chances are that if it seems doomed, it very likely is. Keep it or sell it for parts.
Post by: robx46 on January 02, 2009, 11:03:00 PM
First off, thx to all involved with 1.5. Wasn't too thrilled about flashing again after I had just done it a month ago, but you gotta do what you gotta do!
I don't even pay for live (just running on my last few days of my free 1st month) or use it. But I still like to get online for some downloads and patches and don't want to lose that option. Still like the new fw though, and very nice to make use of my liteon.
I was using 1.41 @ 8x with my previous drive. My liteon does work just as well or better with 1.5, however, with the fw being locked in at 12x I do notice a pretty big increase in noise from the drive. And while loading times are a tad faster, I'd still rather 8x. But again, if it is best for stealth on 1.5, you gotta do what you gotta do!
Hope 1.5 can hold us all over for a long time!
Anyhow, regarding the flashing process. While I appreciate the hard work done on Jungle Flasher, I as well had some issues with it, for sure. And since it is beta (I think), this shouldn't be a surprise. I'm also using vista.
For this process, I fortunately still had my .bin dumps from a month back, so I didn't have to go through the dumping again which was nice. And for those asking, not you don't need the ck3 probe. I dumped the old fashioned way (by soldering the points). Worked just fine.
Thus I was able to pick off at the firmware tool 32 tab to make the new cfw. I did have some trouble with this at first, it wouldn't accept the 1.5 fw file. Wouldn't make dummy.bin either. Eventually I got it all to work, but I'm not sure how I did it.
Wanted to use firmware toolbox like I did for 1.41 but it didn't support 1.5.
So I made my cfw with jungle tool, but that was all I got accomplished with jungle tool. The rest of the process just didn't work for me in JT. Couldn't erase (thought I was bricked at this point). Couldn't even get device ID, nor get it to write later on. It also wasn't identifying my device at all (other than unknown device) and didn't get my port # right.
While not to thrilled with the tool, if the devs can get it working better and we can get some better tuts for it, then it will be a great gui. The tuts I read had screwups in them, which in turn screwed me up pretty bad. And I was using the official team xecutor one, and its not the 1st tut from them I used that wasn't very accurate.
Oh well. Anyhow, after making my cfw and having trouble with JT, I ended up just finding a real nice guide on how to get the job done using dosflash32.
Once I decided to use dosflash32, things went real easy and fast.
My liteon, which I had thought was bricked from the freeze in JT, was finally detected correctly by dosflash32 after just a single well timed power cycle. I let out a sigh of relief! But I still needed to do a proper erase in dosflash, but that went fine, first try.
Then I wrote with my cfw, again worked first try, and that was it!
So, my suggestion for anybody weary of using JT or having issues with it is to simply use dosflash32 to erase and write your cfw, and you can do it all in windows (a very nice thing to not even have to reboot your comp one time for the whole flashing process, thanks ixtreme 1.5!). Maybe just use JT for the dumping and writing the cfw.
Lastly, for anyone still reading
...I do have a question. I've heard from a number of people that it is safer (not sure how much safer) to flash the drive model that came with your 360 rather than spoofing another model.My question is...taking it a step further...does it matter if the drive you flash is the EXACT drive that your 360 came with? Or do you get the same security as long as its the same model # and brand? For example, if my 360 came with a dg-16d2s liteon, is it just as safe to use that same model liteon, even if it isn't the exact same drive that came with your 360?
I wonder this because when using another drive (even if it is the same exact model) you are spoofing your original key from your original drive to it, which is obviously a totally different key than this "other" drive has.
But when flashing the drive your 360 came with, you are simply flashing/spoofing the same key on it that was already on there.
See what I'm getting at? Wondering if spoofing the same model drive (but not your original drive) is still just as safe as flashing your original drive.
Post by: jagough on January 03, 2009, 07:21:00 AM
QUOTE(podger @ Dec 30 2008, 08:26 PM)
If I remove the via drivers will this have any effect on
using iprep when dumping/flashing Samsungs or Benqs
Post by: mlfdco4 on January 03, 2009, 05:33:00 PM
Post by: sum4141s on January 03, 2009, 09:08:00 PM
i really really wanna try it out rite now, but i cant understand instrutstion with all the computer words..
just suggestiong for those whom doesnt understand it like me, i think you guys should make one with the
picture tutioal. thanks
Post by: Konmo on January 04, 2009, 03:46:00 PM
Post by: shai12 on January 04, 2009, 05:43:00 PM
QUOTE(Konmo @ Jan 4 2009, 11:22 PM)
Sorry to change the subject, but where do i find the portio32.inf file?
Its inside the JungleFlasher 0.0.26 BETA file and self installer
Post by: XPunked on January 05, 2009, 04:18:00 AM
I'll be using the DOS based methods only from now on.
Post by: D3ggsy on January 05, 2009, 09:45:00 AM
QUOTE(XPunked @ Jan 5 2009, 11:54 AM)
JungleFlasher has frozen on me 3 times, once during verify which wasn't a problem, but also twice during writing, which killed 2 Liteon drives. So if anyone in Australia has any spare Liteon drives available please PM me or email through my website at XPunked.com
I'll be using the DOS based methods only from now on.
Try flashing them again using DOSFlash, they might not be as dead as you think.
edit: Have a look at this page.
Post by: JD45 on January 05, 2009, 02:01:00 PM
Post by: miggidy on January 05, 2009, 05:24:00 PM
I had no problem extracting the keys, and erasing the drive was easy.
However when attempting to flash the drive, my pc would freeze when ever I turned on my CK3.
With this tutorial, I had no problem flashing my drive.
Thanks all!
On a side note, any word of when and if a multispeed release of IXtreme 1.5 will be made?
I'm happy that my LiteOn works regardless of speed, but I think I'm going back to IXtreme 1.41 for my BenQ.
Yeah, 8X spoiled me
Post by: toonjung on January 06, 2009, 12:12:00 AM
"dosflash w ac00 1 a0 2 0 4 c:\liteon_cfw.bin"
w = write
ac00 = port number
liteon_cfw.bin = patched hacked firmware (made with jungleflash)
I tried typing just "dosflash" and waiting for options to come up but it didn't but freeze my comp.
Hope this will help for people that have same problem.
Post by: ThaBeretta on January 06, 2009, 08:18:00 PM
QUOTE(JD45 @ Jan 5 2009, 04:37 PM)
any update on the hitachi firmware or is it still early january?
Wondering the same thing over here. I'm in no big rush, but I'd like to update my v79 to iXtreme 1.5.
Post by: deilzfcjk on January 07, 2009, 03:59:00 AM
Post by: shai12 on January 07, 2009, 07:00:00 AM
QUOTE(Nol @ Jan 7 2009, 02:00 PM)
Hello,
Can anyone tell me how to open the tray of a lite on with a paperclip.
It does not react to the button of the ck.
Nol
http://beta.ivancove...y_paperclip.jpg
Post by: Cold Turkey on January 07, 2009, 07:44:00 AM
i managed to erase the chip and then proceeded to flash in windows using jungle flasher,
it wrote to it but failed when trying to verify the write,
I then managed to erase the chip again then flashed in dos using dosflash, but was getting error 65 on the xbox,
i can not get the drive to erase again as when i use junge flasher the computer freezes up and every 2 mins or so it works for about 5 seconds any ideas?
i try to use l-0-erase but it returns a FF80 status any help would be appreaciated
Post by: Mikenificent on January 07, 2009, 07:53:00 AM
ive heard a rumor that u shouldnt try spoofing the 1.5 and just leave it as ms28.
does anyone know if this is true?
Post by: Nol on January 07, 2009, 10:33:00 AM
QUOTE(shai12 @ Jan 7 2009, 03:36 PM)
Thanks very much.
Flashing was done within a couple of minutes.
Nol
Post by: jds1469 on January 13, 2009, 08:34:00 AM
"unhandled exception has occurred in your application. if you click continue, the application will ignore this error and attempt to continue. if you click quit the application will close immediatley.
invalidargument=value of 0 is not falid for selectedindex
parameter name: selectedindex"
Post by: xbox360dude on January 14, 2009, 07:25:00 AM
Post by: CHAKALAbg on January 19, 2009, 07:15:00 AM
I haven't used CK3 but I think you can.
Post by: MacTrader on January 19, 2009, 03:42:00 PM
QUOTE(mickey797 @ Dec 30 2008, 09:26 AM)
Hey Guys,
I have a BenQ iXtreme 1.41 drive. All across the forums I'm finding a lot of information, instructions & tutorials regarding the LiteOn drive, but none for the BenQ. Is there any PDF or other set of instructions to use the JungleFlasher GUI (through Windows) to flash BenQ?
Thanks!
I also am getting very lost. I had no problem flashing my Hitachi about a year back and now am dumbfounded with my virgin Benq. I got a 'done' message when I ran JungleFlasher and hit Unlock Benq on the MTK Flash 32 page. When I went to the DVDKey32 tab and hit Get Key it just hangs until my 360 shut off (i'm not sure why, seems like a time out).
All the tutorials for the JungleFlasher are Liteon oriented (and with due cause since they finally have a solution!) but am confused here. I'd use the iPrep method but the new 1.5 is kicking back an error saying it's an invalid firmware. I may be missing an updated tutorial so please point me in that direction if my above responses are redundant.
Thanks!
Post by: Demon R32 on January 19, 2009, 04:48:00 PM
QUOTE(MacTrader @ Jan 20 2009, 12:18 AM)
I also am getting very lost. I had no problem flashing my Hitachi about a year back and now am dumbfounded with my virgin Benq. I got a 'done' message when I ran JungleFlasher and hit Unlock Benq on the MTK Flash 32 page. When I went to the DVDKey32 tab and hit Get Key it just hangs until my 360 shut off (i'm not sure why, seems like a time out).
All the tutorials for the JungleFlasher are Liteon oriented (and with due cause since they finally have a solution!) but am confused here. I'd use the iPrep method but the new 1.5 is kicking back an error saying it's an invalid firmware. I may be missing an updated tutorial so please point me in that direction if my above responses are redundant.
Thanks!
hey this may help have don 3 benq like this
Hook up benq with sata and power then run JF hit unlock , then read, save then hit firmwaretool32 tab load firmware from image then target firmware then spoof save , back to mkt hit write then it writes and finish
Post by: MacTrader on January 19, 2009, 04:56:00 PM
QUOTE(Demon R32 @ Jan 19 2009, 07:24 PM)
hey this may help have don 3 benq like this
Hook up benq with sata and power then run JF hit unlock , then read, save then hit firmwaretool32 tab load firmware from image then target firmware then spoof save , back to mkt hit write then it writes and finish
I'll try this shortly, I don't need to dump any keys or anything?
Thanks for the reply!
Post by: harleywastaken on January 19, 2009, 06:00:00 PM
QUOTE(MacTrader @ Jan 19 2009, 04:32 PM)
I'll try this shortly, I don't need to dump any keys or anything?
Thanks for the reply!
key/inquiry/identify is lite-on only, all others just use one file for the firmware.
Post by: MacTrader on January 19, 2009, 08:01:00 PM
QUOTE(Demon R32 @ Jan 19 2009, 07:24 PM)
hey this may help have don 3 benq like this
Hook up benq with sata and power then run JF hit unlock , then read, save then hit firmwaretool32 tab load firmware from image then target firmware then spoof save , back to mkt hit write then it writes and finish
When I click Read I get
Getting Status from port 0xEC00
Invalid Status
Under drive properties it has Vendor: PBDS
Name: VAD6038-64930C
F/W Rev:
Reserved:
Any suggestions?
Post by: MacTrader on January 19, 2009, 08:27:00 PM
QUOTE(MacTrader @ Jan 19 2009, 10:37 PM)
When I click Read I get
Getting Status from port 0xEC00
Invalid Status
Under drive properties it has Vendor: PBDS
Name: VAD6038-64930C
F/W Rev:
Reserved:
Any suggestions?
Nevermind, scratch that. Found this tutorial, worked perfectly!
http://www.vgcrepair.../Benq-Sammy.pdf
God this was stupid easy.
Post by: darknightxbscene on January 21, 2009, 05:41:00 AM
QUOTE(MacTrader @ Jan 20 2009, 04:03 AM)
Nevermind, scratch that. Found this tutorial, worked perfectly!
http://www.vgcrepair.../Benq-Sammy.pdf
God this was stupid easy.
But, do you know if those drivers (Via Drivers 5.30c ‐ http://www.viaarena....raid_v530c.zip) work good with lite-on too? Or should we switch between installing and unninstalling drivers since we have a sam/benq/hitachi or liteon?
thanks
nice tut 
Post by: antz1970 on January 22, 2009, 06:42:00 PM
Post by: pricemeista33 on January 22, 2009, 08:43:00 PM
Thnx....
Post by: harleywastaken on January 22, 2009, 10:02:00 PM
QUOTE(antz1970 @ Jan 22 2009, 06:18 PM)
the via 530c drivers worked out fine for me with lite on , managed to do the whole lot with jungleflasher , no lock ups at all
just installed the drivers and did a lite-on, no problem... i assume you're still cycling the drive power after erase?
Post by: sanguia1 on January 25, 2009, 02:17:00 PM
This post has been edited by sanguia1: Jan 25 2009, 10:25 PM
Post by: originalmacnut on January 28, 2009, 02:10:00 AM
I just wanted to let the team know, Jungleflash .26B & .43B is working perfect on Windows 2003 Server,
no freezes at all. IOport installed fine with no problems either.
Have flashed all my family 360's now.
Thanks TEM JUNGLE for all your hard work
Cheers
-OMN
Post by: thedogfather on January 30, 2009, 05:40:00 PM
This post has been edited by thedogfather: Jan 31 2009, 01:44 AM
Post by: ch4676 on February 02, 2009, 01:04:00 AM
--pluged a SATA cable into my ASUS pl5-vm1394 SATA port onboard (intel chipset).
--pluged the other end into my benq VAD6038 64930c that is still pluged into the 360 to power up.
--tryed to run jungleflasher .43 got a drive not ready error, closed it down.
--tryed to run jungleflasher .26 worked fine no error.
--found my drive in mtk32 tab and clicked UNLOCK BENQ.
--then clicked device and then READ.
--it said done and i saved the original firmware bin file.
--next clicked firmware tool 32. and source , loaded orig. bin.
--then open target and loaded the benq IX15BENQ.
--then clicked spoof to target and saved the bin. file.
--then clicked the mtk 32 tab and WRITE.
--it said write ok so i clicked OUTRO. and closed the program.
--then powered off my drive and computer , unpluged everything , put it all back and it will not play games only dvd's STORE BAUGHT GAMES!!! and i have no idea what to do now i cant unlock it again or read it or anything because in the tut it says wont work on firmware 1.5 so what do i do now?
is it ok if i add the log i saved it but did not want to make anyone mad...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~
JungleFlasher 0.0.26 Beta
Session Started Sun Feb 01 19:16:59 2009
Found 7 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives.
Found 2 CD/DVD drives.
Sending Magic Keys to Drive on port 0x0xA000
............................
Done!
Sending Vendor Intro to port 0xA000
Serial flash found with Status 0x73
Sending Device ID request to port 0xA000
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0xA000
Serial flash found with Status 0x73
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Benq Dump file saved to C:\Documents and Settings\a\Desktop\benq\BENQ-OFW.bin
Loading MTK_Flash source file
Inquiry string found
Identify string found
DVD key found @ 0xB030 key is 307F491E102116405E98D9515AA6BE40
Firmware is Benq OSIG: PBDS VAD6038-64930C
Firmware type is: Stock
Loading target file C:\Documents and Settings\a\Desktop\ixextreme\ixtreme15\ixtreme_1.5\ix15Benq.bin
Target File MD5 hash is: a6d4c666c0014cadd0ca51c98cd3c80b
Genuine Benq iXtreme 1.5 Final
Inquiry string found
Identify string found
DVD key found @ 0xE030 key is 77777777777777777777777777777777
Firmware is Benq OSIG: PBDS VAD6038-64930C
Firmware type is: iXtreme v1.50-12x-FINAL
Spoofing Target
DVD Key copied to target
Inquiry strings identical
Identify strings identical
0xFF00 area copied for Benq to Benq
Target f/w saved as: C:\Documents and Settings\a\Desktop\ixextreme\ixtreme15\hacked benq\Benq_CFW.bin
Getting Status from port 0xA000
SPi flash found with Status 0x73
Sending Chip Erase to Port 0xA000
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0xA000
Post by: Sweetol on February 02, 2009, 03:43:00 PM
sorry for bad english..
This post has been edited by Sweetol: Feb 3 2009, 12:00 AM
Post by: matycon on February 02, 2009, 09:26:00 PM
QUOTE(ch4676 @ Feb 2 2009, 03:04 AM)
DVD key found @ 0xB030 key is 307F491E102116405E98D9515AA6BE40
Firmware is Benq OSIG: PBDS VAD6038-64930C
Firmware type is: Stock
Loading target file C:\Documents and Settings\a\Desktop\ixextreme\ixtreme15\ixtreme_1.5\ix15Benq.bin
Target File MD5 hash is: a6d4c666c0014cadd0ca51c98cd3c80b
Genuine Benq iXtreme 1.5 Final
Inquiry string found
Identify string found
DVD key found @ 0xE030 key is 77777777777777777777777777777777
You issue has got to be those 7's. It doesnt look like your key was properly inserted into the hacked firmware.
It looks like you did actually get a clean key. (307F491E102116405E98D9515AA6BE40)
What i would do it open Ixtreme 1.5 in firmware toolbox, manually insert the key, then reflash. If that isnt the key then you are SOL my friend, and your box is bricked with a capital B.
Post by: todd93 on February 07, 2009, 08:39:00 AM
Thanks
Todd
Post by: KineticX on February 07, 2009, 03:25:00 PM
Did it today with CK3 kit and it's working great!
I've been flashing 360's since it started and people like TeamXecuter and Team Jungle never cease to amaze me (IMG:style_emoticons/default/biggrin.gif)
This post has been edited by KineticX: Feb 7 2009, 11:26 PM
Post by: CanadianTSi on February 07, 2009, 05:13:00 PM
Post by: FireSokar on February 07, 2009, 07:06:00 PM
Post by: mbeno13 on February 10, 2009, 02:28:00 PM
Post by: _cloaked_ on February 19, 2009, 01:21:00 PM
QUOTE(mbeno13 @ Feb 11 2009, 12:04 AM)
Did I miss the Hitachi release at some point? I thought it was going to released in early January and now it is early February. Does anyone have an update on this? Thanks.
mbeno13, I signed on today thinking the same thing. All my boxes ended up having hitachis, from 46-79. I haven't played online because of still being at 1.4. But, I don't do live much anyways. I was under the impression it was coming early January too but apparently not. ixtreme 1.4 is doing just fine for my backups but I would like the latest and greatest version too haha. If anyone has any information about ixtreme 1.5 for hitachi, could you share it with us who are patiently waiting? Thanks
_cloaked_
Post by: mbeno13 on February 23, 2009, 03:16:00 PM
Post by: xbox_360_nxe on February 23, 2009, 10:26:00 PM
Post by: swq on February 24, 2009, 05:54:00 AM
Post by: hippodude100 on February 24, 2009, 06:28:00 AM
Thjere is a thread here somewhere "Lite on key for free"
Post by: couchpot on February 28, 2009, 04:29:00 PM
QUOTE(jds1469 @ Jan 13 2009, 05:10 PM)
when I try to install Portio32.exe after doing the Vista Portio32.inf install I still get an error box to pop up saying file not found c:\windows\yehal. Also if I just try to open jungleflasher i get an error from the .net
"unhandled exception has occurred in your application. if you click continue, the application will ignore this error and attempt to continue. if you click quit the application will close immediatley.
invalidargument=value of 0 is not falid for selectedindex
parameter name: selectedindex"
I am also having the same issue. Did anyone find a fix for this yet? Do we need to install something more to get JungleFlasher running properly? I have this issue on one PC (running XP) but not on another(running VISTA).
Thanks in advance
Post by: darthjp86 on March 02, 2009, 11:05:00 PM
Post by: pricemeista33 on April 09, 2009, 07:12:00 PM
Much appreciation to TEAM JUNGLE!!
Post by: catatronix on May 26, 2009, 03:08:00 AM
QUOTE(swq @ Feb 24 2009, 06:46 AM)
Hi there.. Noob flashing lite-on.. Do we really need ck3 probe? I have ck3 pro... Other alternative? Thanx alot.. Really2 need help..
Use 2 mod took about a year off due to family issue; A buddy erase his firmware, but was unable to write to drive Liteon. He end up with a E74 error, i could understand, if you can't read how can you erase firmware?