Post by: GSModz on November 30, 2008, 09:21:00 PM
i had a connection using my Via 6421L on Sata port 1
if the drive was on while booting, i would get a Raid error.
if the drive was off i got all the way to reading the firmware using iPrep
here's where i hit my issue... i followed the instructions carefully,
turned the drive on.... on-screen flashed "Status: 0xD1" & "0x51" non-stopping.
so i turned the drive off, status stopped @ "Status: 0xD1"
turn the drive back on, and the status went back to flashing back and forth with "0xD2" and "0x52"
am i getting a read error or if i'm doing something wrong could someone point me in the right direction?
Thankz
Post by: radiator20 on November 30, 2008, 09:49:00 PM
QUOTE(GSModz @ Dec 1 2008, 12:21 AM) 
i was updating firmware on a BenQ/Lite-on DVDrom,
i had a connection using my Via 6421L on Sata port 1
if the drive was on while booting, i would get a Raid error.
if the drive was off i got all the way to reading the firmware using iPrep
here's where i hit my issue... i followed the instructions carefully,
turned the drive on.... on-screen flashed "Status: 0xD1" & "0x51" non-stopping.
so i turned the drive off, status stopped @ "Status: 0xD1"
turn the drive back on, and the status went back to flashing back and forth with "0xD2" and "0x52"
am i getting a read error or if i'm doing something wrong could someone point me in the right direction?
Thankz
Your on the right track, read the textbook.
This is from the textbook
CODE
Follow the prompts on the screen, make sure your 360 is OFF and press
any key to continue. Press Y to resend the MTK Vendor Intro.
Turn on the Xbox 360 and wait 2 or more seconds, status toggles
between 0x51 and 0xD1.
Turn off the Xbox 360 and wait 2 or more seconds, status will stay at
0xD1.
Turn on the Xbox 360, you should get a good drive status 0x73 and
reading should begin automatically.
All 4 banks should read OK and you should get a Reading finished!
message with a Datasum.
This post has been edited by radiator20: Dec 1 2008, 05:51 AM
Post by: GSModz on December 01, 2008, 08:21:00 AM
and have since learned, many people who want to flash a 360 with a liteon drive, end
up swapping the drive and spoofing the key.
so i think my next step is to get ahold of a nice Toshiba/Samsung drive
good to know that my sata card isn't bad.. i thought it just wasn't reading properly lol
thanks for your efforts, and the textbook is very helpful, i keep a copy on my desktop lol
Cheers
Post by: kuhnnl on December 02, 2008, 08:28:00 AM
I have a ASUS p5b w/ VIA VT6421A i used iprep
Kuhnnl.
Post by: calloused labia on December 02, 2008, 08:40:00 AM
QUOTE(kuhnnl @ Dec 2 2008, 10:28 AM)
Same problem , readed 100x times that part i get the 0xd1 then i turn the drive on then it goes to d2 / 52 toggle. Help me please been working all night on it still nothing..... (IMG:style_emoticons/default/sad.gif)
I have a ASUS p5b w/ VIA VT6421A i used iprep
Kuhnnl.
I have a ASUS p5b w/ VIA VT6421A i used iprep
Kuhnnl.
can you confirm the drive model
Post by: kuhnnl on December 02, 2008, 08:43:00 AM
Post by: radiator20 on December 02, 2008, 11:46:00 AM
QUOTE(GSModz @ Dec 1 2008, 12:21 AM)
i was updating firmware on a BenQ/Lite-on DVDrom,
i had a connection using my Via 6421L on Sata port 1
if the drive was on while booting, i would get a Raid error.
if the drive was off i got all the way to reading the firmware using iPrep
here's where i hit my issue... i followed the instructions carefully,
turned the drive on.... on-screen flashed "Status: 0xD1" & "0x51" non-stopping.
so i turned the drive off, status stopped @ "Status: 0xD1"
turn the drive back on, and the status went back to flashing back and forth with "0xD2" and "0x52"
am i getting a read error or if i'm doing something wrong could someone point me in the right direction?
Thankz
I think I figured it out, disconnect everything else from your pc, usually hard drives and the other dvd drives.
If that doesnt work try to instead of waiting 2 seconds wait 10 or 5 seconds and continue.
Post by: kuhnnl on December 02, 2008, 11:58:00 AM
QUOTE(radiator20 @ Dec 2 2008, 07:46 PM)
I think I figured it out, disconnect everything else from your pc, usually hard drives and the other dvd drives.
If that doesnt work try to instead of waiting 2 seconds wait 10 or 5 seconds and continue.
Doesnt work to. still getting 0xd2 toggle 0x52
i got this mfg date on my xbox 2008-08-26
Post by: Dave_c2k2 on December 02, 2008, 12:05:00 PM
Post by: kuhnnl on December 02, 2008, 12:25:00 PM
QUOTE(Dave_c2k2 @ Dec 2 2008, 08:05 PM)
Wouldn't that make it an almost definite Lite On though? Is the Xbox brand new? Pop open the actual DVD drive and take a pic (IMG:style_emoticons/default/smile.gif)
Bought it two weeks back (IMG:style_emoticons/default/sad.gif)
QUOTE(kuhnnl @ Dec 2 2008, 08:22 PM)
But i als heard that there is a major breakthrou with liteon drives Ixtreme 1.5, think i wait for that i am almost sure that i have a liteon drive