xboxscene.org forums
Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: Moose_69 on April 26, 2008, 05:28:00 PM
-
Going to flash my benq drive using iprep but can't get my Dell Inspiron 530s to boot to the usb drive. It shows in my boot options but says no boot device found or give me a flashing - and I have to restart.
-
What size is the USB device... > 512mb can cause issues
You could see if there is an update for your pc system bios...Although if it shows up the BIOS it's probably OK....
-
it's a 4gb card. Do I need to get another card? if so what type and size is best for this?
-
You could try a floppy, I always use a floppy, could never get USB to boot either.....
-
new pc don't have a floppy just a sd card reader and usb. old pc has one but I have been having problems with floppy's. will buy new floppy discs and a 256 usb card at walmart and try again.
-
Who would have thought walmart didn't have any floppy discs. I got smaller usb stick but it's a 512mb. I don't think iprep is making it bootable.
got it first try with the new flash drive
-
I had the same problem couldnt get my computer to boot my 4gb card, turns out it was vista for me i switched to my old comp which had xp and i it worked like a champ
-
i recently had the same problem and had to goto mass storage device configuration in the bios and set it to emulate as force FDD
it then booted iprep
also there is a topic on here that gives a tip on how to get it to boot, you download a hp tool to prep the usb drive, and add windows 98 boot files, then use iprep to make the usb drive ready but don't tick format and make usb drive bootable in iprep
search for the topic i found it the other day on here