xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: uk_dan2k on December 03, 2007, 07:05:00 AM

Title: Benq Flashing Dos Flash Says Oxff For Status Code
Post by: uk_dan2k on December 03, 2007, 07:05:00 AM
I managed to extract the benq cd key, and prepared my hacked benq firmware.
when i went to flash it it wont work, no flicking between different Ox numbers, it just stays on OxFF for status code.


Is any soldering needed for flashing? using a nforce 4 chipset.
I'm using the latest dos flash 1.4 beta using the command:-

dosflash w 9c90 1 a0 1 4 ix.bin 0

9c90 is the correct port
drive is connected to a0
ix.bin is the correct name for ixtreme benq

Title: Benq Flashing Dos Flash Says Oxff For Status Code
Post by: mr-blonde on December 03, 2007, 07:36:00 AM
Use iPrep 101 v006 its so much simpler than dosflash
Title: Benq Flashing Dos Flash Says Oxff For Status Code
Post by: waytoodeep03 on December 03, 2007, 08:52:00 AM
are you specifying the drive of ixbin? Did you erase your current firmware off the drive first?

Also did you verify your key with firmware toolbox before you erased the firmware? Make sure there arnet any error with the orig.bin key
Title: Benq Flashing Dos Flash Says Oxff For Status Code
Post by: sid1747 on December 03, 2007, 10:39:00 AM
i am also having this problem i cant even read it i have the status ff i got it to work once on my bros pc but i cant get it to work on mine!

i have the right port number also but it just aint findin the drive.
Title: Benq Flashing Dos Flash Says Oxff For Status Code
Post by: uk_dan2k on December 03, 2007, 12:53:00 PM
QUOTE(mr-blonde @ Dec 3 2007, 03:12 PM) *
Use iPrep 101 v006 its so much simpler than dosflash


i am using that iprep version now, still getting same problems

QUOTE(waytoodeep03 @ Dec 3 2007, 04:28 PM) *
are you specifying the drive of ixbin? Did you erase your current firmware off the drive first?
Also did you verify your key with firmware toolbox before you erased the firmware? Make sure there arnet any error with the orig.bin key


i didnt earse firmware from benq drive, because the guide i read said you only have to do that when using motherboards with via chipsets and mines a nforce4.

i opened the dumped original firmware into toolbox and it reconised it as benq and came up with a cd key.

This post has been edited by uk_dan2k: Dec 3 2007, 08:54 PM
Title: Benq Flashing Dos Flash Says Oxff For Status Code
Post by: danooch13 on December 03, 2007, 01:07:00 PM
Did you try using the dosflash auto command and following onscreen instructions?

I find that to be alot easier.

It is just dosflash at the command prompt.

Good luck!
Title: Benq Flashing Dos Flash Says Oxff For Status Code
Post by: uk_dan2k on December 04, 2007, 11:29:00 AM
QUOTE(danooch13 @ Dec 3 2007, 08:43 PM) *
Did you try using the dosflash auto command and following onscreen instructions?

I find that to be alot easier.

It is just dosflash at the command prompt.

Good luck!


i trying the auto exec files on iprep a couple of times and now its working. AT last ! (IMG:style_emoticons/default/smile.gif)