QUOTE(obv @ Oct 13 2007, 11:29 PM)

i've just realised what i did to brick it. i used the wrong fw =\ instead of a 79 fw i stupidly used a 78
reading up on some forum threads across the board, that would be a bricked drive wouldnt it? i have flashed quite a few 360's just this was my first hitachi 79.. im not looking at repairing it.. im looking at replacing the 79FL with an 79FK
Have you tried getting drive in mode B again with slax 2.1 disc?
I had a similiar problem when pc crashed during flash drive wouldnt eject but was still able to get it into mode B and flash it again and worked fine after that.
QUOTE(Carlitosbaby @ Oct 14 2007, 01:29 PM)

Have you tried getting drive in mode B again with slax 2.1 disc?
I had a similiar problem when pc crashed during flash drive wouldnt eject but was still able to get it into mode B and flash it again and worked fine after that.
i cant seem to get it to modeb again. soldered the passkey onto it again (cleaner job than the first) and now the passkey keeps flashing every few seconds whilst the 360 is on
QUOTE(obv @ Oct 15 2007, 07:16 AM)

i cant seem to get it to modeb again. soldered the passkey onto it again (cleaner job than the first) and now the passkey keeps flashing every few seconds whilst the 360 is on
then yes you are bricked either find someone with a programmer or buy a new drive from ebay since you have your key shouldnt be a problem