xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: jkklim on October 06, 2007, 12:28:00 PM

Title: Help! Did I Brick My Xbox?
Post by: jkklim on October 06, 2007, 12:28:00 PM

i tried flashing my xbox 360 (samsung ms28) with iPrep and the latest ixtreme firmware. Everytime i try to execute the iDump command, it tells me that there is an error: the orig.bin isn't 256k. Does this mean I screwed up my xbox drive? I tested to make sure it still plays original xbox 360 games and it does fine.

Title: Help! Did I Brick My Xbox?
Post by: toyzombie24 on October 06, 2007, 02:41:00 PM

If your Xbox 360 still loads up then it is not brick.

Title: Help! Did I Brick My Xbox?
Post by: jkklim on October 06, 2007, 03:06:00 PM

so that means the original firmware on my xbox drive is still ok and intact?

Title: Help! Did I Brick My Xbox?
Post by: caster420 on October 06, 2007, 03:21:00 PM

QUOTE(jkklim @ Oct 6 2007, 05:06 PM)

so that means the original firmware on my xbox drive is still ok and intact?

Yes, if the drive is functioning fine in the 360, then your original firmware is fine.

It sounds like MTKFlash is not completing.  Are you sure you didnt get an mtkflash error when trying to dump (not the samtool file size error)?  

Caster.

Title: Help! Did I Brick My Xbox?
Post by: myfranco on October 06, 2007, 04:28:00 PM

I only use XBM+mtkflash to flash samsungs.I always stay away from idump,iprep,samxxx etc.. just personal choice and no problem so far.You can check my tutorial which is based on xtreme 3.3 but you can do with any firmware.