xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: ratis on July 31, 2007, 03:59:00 PM

Title: Swap Dead Ms28 For Ms09?
Post by: ratis on July 31, 2007, 03:59:00 PM: so my buddys ms28 died on him and and he bought an ms09, could i just dump the firmware that is on the 28 and flash that straight to the ms09 or will i screw it up
Title: Swap Dead Ms28 For Ms09?
Post by: myfranco on July 31, 2007, 05:09:00 PM: Dump the firmware,get the key with maximus firmware toolbox 4.0 and patch the key to "53d-ms25.bin" that you can find in extreme 5.3 folder.
Title: Swap Dead Ms28 For Ms09?
Post by: ratis on July 31, 2007, 06:47:00 PM: which firmware do i dump and patch the 28 or the 09
Title: Swap Dead Ms28 For Ms09?
Post by: Grim187 on August 01, 2007, 03:32:00 AM: dump the ms28 and flash the ms09 with it.

if you got it from eBay its probably already got a hacked firmware on it just FYI.

p.s. all the samsung drives found in 360s are identical hardware wise the only thing different is the version of the firmware witch changes nothing about how you flash the drive. (other then tricks to get around M$ definitions)

This post has been edited by Grim187: Aug 1 2007, 10:33 AM
Title: Swap Dead Ms28 For Ms09?
Post by: ratis on August 01, 2007, 04:14:00 AM: so i did what you said grim and it seems my friend got burned caause the drive just clicks and the laser barely moves
Title: Swap Dead Ms28 For Ms09?
Post by: Grim187 on August 01, 2007, 12:37:00 PM: QUOTE(ratis @ Aug 1 2007, 03:14 AM)

so i did what you said grim and it seems my friend got burned caause the drive just clicks and the laser barely moves

that's a problem with hacked firmware, you might need to replace the laser or at least clean it, remember that ms09 is the oldest drive there is, they haven't been in consoles since launch.
Title: Swap Dead Ms28 For Ms09?
Post by: ratis on August 01, 2007, 03:43:00 PM: he bought it from etech so aparently it was brand new
i will try cleaning the laser though
and also what do you mean by a ahcked firmware problem how can i fix it ?
Title: Swap Dead Ms28 For Ms09?
Post by: Grim187 on August 01, 2007, 06:15:00 PM: QUOTE(ratis @ Aug 1 2007, 02:43 PM)

and also what do you mean by a ahcked firmware problem how can i fix it ?

use B rev or put an original firmware on it.
Title: Swap Dead Ms28 For Ms09?
Post by: ratis on August 01, 2007, 06:35:00 PM: ill try ixtreme 1.2b 2 nite
Title: Swap Dead Ms28 For Ms09?
Post by: ratis on August 01, 2007, 08:47:00 PM: ok i dumped the firmware on ms25 with iprep and then went to flash the ms09 with the hacked one that was made(which was ixtreme1.2b). the flash then instantly failed,but now the drive seems to be locked. the light just flashes rapidly on the 360 and it will not eject or do anything. also when i plug the 360s sata cable back in i get a red light in the 4th quadrant. so yeah i am fairly sure hope is lost i cant figure out what i did wrong. this is the first box thats given me any grief.
Title: Swap Dead Ms28 For Ms09?
Post by: ratis on August 02, 2007, 11:33:00 AM: el bumpo
Title: Swap Dead Ms28 For Ms09?
Post by: speedfiend111 on August 02, 2007, 12:06:00 PM: QUOTE(ratis @ Aug 2 2007, 06:33 PM)

el bumpo

try bad flash recovery and hot swap the drive should do the trick (IMG:style_emoticons/default/mad.gif)
Title: Swap Dead Ms28 For Ms09?
Post by: ratis on August 02, 2007, 09:27:00 PM: i cant get it for some reason the 10 second is just not working anymore the light just flashes like crazy
Title: Swap Dead Ms28 For Ms09?
Post by: dalton4life on August 02, 2007, 11:39:00 PM: Something a slightly similar happened to me today. I was just flashing a MS25. Really it said MS22 and a MS25 was on top of that. I flashed it to 5.3a and originals work, but backups didn't. Then I tried to go to ixtreme 1.0 (yes I know it's old) and my PC cut off halfway through the 1st bank. The DVD drive no longer responsed and it gave a lower right red light when connected to the 360. I tried the 10 second trick and that didn't work. Then I tried flashing it like it was a MS25 and it went right ahead is working fine now.
Title: Swap Dead Ms28 For Ms09?
Post by: ratis on August 03, 2007, 11:54:00 AM: ok so i just hook it up to the tv and it is giving e65 and i dont know what happened
but the drive will not do anything so i think im screwed. 10sec wont work tried to flash like a ms25 nothing