Post by: SaveFerris on December 22, 2006, 09:53:00 PM
Heres my log..(sorry for the length)
I think it might be a problem with my burner..I'm going to get some verbs, and a 111d, I'm just wondering why this isn't working..It has been annoying me.
Thanks!
I 00:30:18 ImgBurn Version 2.1.0.0 started!
I 00:30:18 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 1)
I 00:30:18 Initialising SPTI...
I 00:30:18 Searching for SCSI / ATAPI devices...
I 00:30:18 Found 1 DVD-ROM and 1 DVD+R!
I 00:30:37 Operation Started!
I 00:30:37 Source File: C:\Documents and Settings\Administrator\Desktop\ggs-lsnb.iso
I 00:30:37 Source File Sectors: 355,510 (MODE1/2048)
I 00:30:37 Source File Size: 728,084,480 bytes
I 00:30:37 Source File File System(s): ISO9660
I 00:30:37 Destination Device: [3:0:0] Memorex DVD+/-DLRWL1 F16 BWSE (D:) (ATA)
I 00:30:37 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 6x, 8x, 12x, 14x, 16x)
I 00:30:37 Destination Media Sectors: 2,295,104
I 00:30:37 Write Mode: DVD
I 00:30:37 Write Type: DAO
I 00:30:37 Write Speed: 2.4x
I 00:30:37 Link Size: Auto
I 00:30:37 Test Mode: No
I 00:30:37 BURN-Proof: Enabled
I 00:30:37 Filling Buffer...
I 00:30:43 Writing LeadIn...
I 00:31:09 Writing Image...
W 00:32:28 Waiting for buffers to recover...
W 00:32:34 Waiting for hard disk activity to reach threshold level...
I 00:32:35 Writing Image...
W 00:32:53 Waiting for buffers to recover...
W 00:32:59 Waiting for hard disk activity to reach threshold level...
I 00:33:00 Writing Image...
W 00:33:20 Waiting for buffers to recover...
W 00:33:26 Waiting for hard disk activity to reach threshold level...
I 00:33:27 Writing Image...
W 00:33:47 Waiting for buffers to recover...
W 00:33:53 Waiting for hard disk activity to reach threshold level...
I 00:33:54 Writing Image...
W 00:34:12 Waiting for buffers to recover...
W 00:34:18 Waiting for hard disk activity to reach threshold level...
I 00:34:19 Writing Image...
W 00:34:38 Waiting for buffers to recover...
W 00:34:44 Waiting for hard disk activity to reach threshold level...
I 00:34:45 Writing Image...
W 00:35:06 Waiting for buffers to recover...
W 00:35:12 Waiting for hard disk activity to reach threshold level...
I 00:35:13 Writing Image...
W 00:35:33 Waiting for buffers to recover...
W 00:35:39 Waiting for hard disk activity to reach threshold level...
I 00:35:40 Writing Image...
W 00:36:03 Waiting for buffers to recover...
W 00:36:09 Waiting for hard disk activity to reach threshold level...
I 00:36:10 Writing Image...
W 00:36:32 Waiting for buffers to recover...
W 00:36:38 Waiting for hard disk activity to reach threshold level...
I 00:36:39 Writing Image...
W 00:36:57 Failed to Write Sectors 262912 - 262943 - The request could not be performed because of an I/O device error.
W 00:36:57 Retrying (1 of 20)...
W 00:37:38 Retry Failed - The request could not be performed because of an I/O device error.
W 00:37:38 Retrying (2 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (3 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (4 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (5 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (6 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (7 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (8 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (9 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (10 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (11 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (12 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (13 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (14 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (15 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (16 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (17 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (18 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (19 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
W 00:37:43 Retrying (20 of 20)...
W 00:37:43 Retry Failed - Invalid Address For Write
E 00:37:45 Failed to Write Sectors 262912 - 262943 - The request could not be performed because of an I/O device error.
I 00:37:46 Synchronising Cache...
I 00:37:47 Closing Track...
This post has been edited by SaveFerris: Dec 23 2006, 05:54 AM
Post by: SaveFerris on December 23, 2006, 07:30:00 AM
Thanks again.
-Mike (IMG:style_emoticons/default/smile.gif)
Post by: Knasen on December 23, 2006, 09:28:00 AM
I had imgburn throwing me errors alot on my old HP burner, so i switched to the one in my laptop (a NEC) and now I get no errors at all. I have always been using Verbatim as it seems to be the most reliable brand.
Post by: SaveFerris on December 23, 2006, 04:45:00 PM
Is this possible?
Thanks!
-Mike
Post by: black_zs on December 23, 2006, 05:13:00 PM
Couple of things you can try...
1. Check the firmware is current
2. Switch to better media. Verbatim would be the better choice from what out right now
Post by: SaveFerris on December 25, 2006, 04:23:00 PM
ok, so...I switched to Verbatim DL media...
I burned the disk..it went all the way through..to 100 percent..
then the disk drive opened..then closed again...and it attempted to verify it..and I get this..
LOG:
I 18:45:11 ImgBurn Version 2.1.0.0 started!
I 18:45:11 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 1)
I 18:45:11 Initialising SPTI...
I 18:45:11 Searching for SCSI / ATAPI devices...
I 18:45:11 Found 1 DVD-ROM and 1 DVD+R!
I 18:47:49 Operation Started!
I 18:47:49 Source File: C:\Documents and Settings\Administrator\Desktop\ggs-lsnb.iso
I 18:47:49 Source File Sectors: 355,510 (MODE1/2048)
I 18:47:49 Source File Size: 728,084,480 bytes
I 18:47:49 Source File File System(s): ISO9660
I 18:47:49 Destination Device: [3:0:0] Memorex DVD+/-DLRWL1 F16 BWSE (D:) (ATA)
I 18:47:49 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x)
I 18:47:49 Destination Media Sectors: 4,173,824
I 18:47:49 Write Mode: DVD
I 18:47:49 Write Type: DAO
I 18:47:49 Write Speed: 2.4x
I 18:47:49 Link Size: Auto
I 18:47:49 Test Mode: No
I 18:47:49 BURN-Proof: Enabled
W 18:48:13 User specified layer break position is such that L0 < L1.
W 18:48:16 User specified layer break position is such that all data will be written on L0.
I 18:48:16 User Specified L0 Data Zone Capacity: 1,913,760
I 18:48:46 Filling Buffer...
I 18:48:52 Writing LeadIn...
I 18:48:54 Writing Image...
I 18:48:54 Writing Layer 0... (LBA: 0 - 1913759)
W 18:49:18 Waiting for buffers to recover...
W 18:49:25 Waiting for hard disk activity to reach threshold level...
I 18:49:26 Writing Image...
W 18:49:52 Waiting for buffers to recover...
W 18:49:58 Waiting for hard disk activity to reach threshold level...
I 18:49:59 Writing Image...
W 18:50:23 Waiting for buffers to recover...
W 18:50:29 Waiting for hard disk activity to reach threshold level...
I 18:50:30 Writing Image...
W 18:50:52 Waiting for buffers to recover...
W 18:50:58 Waiting for hard disk activity to reach threshold level...
I 18:50:59 Writing Image...
W 18:51:27 Waiting for buffers to recover...
W 18:51:33 Waiting for hard disk activity to reach threshold level...
I 18:51:34 Writing Image...
W 18:52:14 Waiting for buffers to recover...
W 18:52:19 Waiting for hard disk activity to reach threshold level...
I 18:52:20 Writing Image...
W 18:52:58 Waiting for buffers to recover...
W 18:53:03 Waiting for hard disk activity to reach threshold level...
I 18:53:04 Writing Image...
W 18:53:45 Waiting for buffers to recover...
W 18:53:51 Waiting for hard disk activity to reach threshold level...
I 18:53:52 Writing Image...
W 18:54:28 Waiting for buffers to recover...
W 18:54:34 Waiting for hard disk activity to reach threshold level...
I 18:54:35 Writing Image...
W 18:55:14 Waiting for buffers to recover...
W 18:55:19 Waiting for hard disk activity to reach threshold level...
I 18:55:20 Writing Image...
W 18:55:54 Waiting for buffers to recover...
W 18:56:00 Waiting for hard disk activity to reach threshold level...
I 18:56:01 Writing Image...
I 18:56:12 Synchronising Cache...
I 18:56:13 Closing Track...
I 18:56:15 Finalising Disc...
I 19:00:43 Image MD5: 8531d28c08e69f2684637939e4c8ead4
I 19:00:43 Operation Successfully Completed! - Duration: 00:12:53
I 19:00:43 Average Write Rate: 1,627 KB/s (1.2x) - Maximum Write Rate: 3,203 KB/s (2.3x)
I 19:00:43 Cycling Tray before Verify...
W 19:00:49 Waiting for device to become ready...
I 19:01:04 Device Ready!
I 19:01:04 Operation Started!
I 19:01:04 Source Device: [3:0:0] Memorex DVD+/-DLRWL1 F16 BWSE (D:) (ATA)
I 19:01:04 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-003-00) (Speeds: 2.4x)
I 19:01:04 Image File: C:\Documents and Settings\Administrator\Desktop\ggs-lsnb.iso
I 19:01:04 Image File Sectors: 355,510 (MODE1/2048)
I 19:01:04 Image File Size: 728,084,480 bytes
I 19:01:04 Image File File System(s): ISO9660
I 19:01:04 Verifying Sectors...
W 19:01:18 Miscompare at LBA: 1337, Offset: 1686
W 19:01:18 Device: 0x1C
W 19:01:18 Image File: 0x14
W 19:01:18 Total Errors in Sector: 1
I 19:01:18 Verifying Sectors...
W 19:01:20 Miscompare at LBA: 1358, Offset: 470
W 19:01:20 Device: 0x1C
W 19:01:20 Image File: 0x14
W 19:01:20 Total Errors in Sector: 1
I 19:01:20 Verifying Sectors...
E 19:01:21 Miscompare at LBA: 1535, Offset: 1678
E 19:01:21 Device: 0x1C
E 19:01:21 Image File: 0x14
E 19:01:21 Total Errors in Sector: 1
E 19:01:21 Failed to Verify Sectors!
E 19:01:21 Operation Failed! - Duration: 00:00:16
I 19:01:21 Average Verify Rate: 191 KB/s (0.1x) - Maximum Verify Rate: 781 KB/s (0.6x)
Thanks!
-Mike
ps. the game disk isn't recognized when I put it into my 360.
and...Before it started burning I got an error dealing with this:
W 18:48:13 User specified layer break position is such that L0 < L1.
W 18:48:16 User specified layer break position is such that all data will be written on L0.
I 18:48:16 User Specified L0 Data Zone Capacity: 1,913,760
It says would you like to continue with the burn anyway? and I said yes.
This post has been edited by SaveFerris: Dec 26 2006, 12:25 AM
Post by: turk27 on December 26, 2006, 05:17:00 AM
QUOTE(SaveFerris @ Dec 26 2006, 12:30 AM) 
UPDATE!!
ok, so...I switched to Verbatim DL media...
I burned the disk..it went all the way through..to 100 percent..
then the disk drive opened..then closed again...and it attempted to verify it..and I get this..
LOG:
I 18:45:11 ImgBurn Version 2.1.0.0 started!
I 18:45:11 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 1)
I 18:45:11 Initialising SPTI...
I 18:45:11 Searching for SCSI / ATAPI devices...
I 18:45:11 Found 1 DVD-ROM and 1 DVD+R!
I 18:47:49 Operation Started!
I 18:47:49 Source File: C:\Documents and Settings\Administrator\Desktop\ggs-lsnb.iso
I 18:47:49 Source File Sectors: 355,510 (MODE1/2048)
I 18:47:49 Source File Size: 728,084,480 bytes
I 18:47:49 Source File File System(s): ISO9660
I 18:47:49 Destination Device: [3:0:0] Memorex DVD+/-DLRWL1 F16 BWSE (D:) (ATA)
I 18:47:49 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x)
I 18:47:49 Destination Media Sectors: 4,173,824
I 18:47:49 Write Mode: DVD
I 18:47:49 Write Type: DAO
I 18:47:49 Write Speed: 2.4x
I 18:47:49 Link Size: Auto
I 18:47:49 Test Mode: No
I 18:47:49 BURN-Proof: Enabled
W 18:48:13 User specified layer break position is such that L0 < L1.
W 18:48:16 User specified layer break position is such that all data will be written on L0.
I 18:48:16 User Specified L0 Data Zone Capacity: 1,913,760
I 18:48:46 Filling Buffer...
I 18:48:52 Writing LeadIn...
I 18:48:54 Writing Image...
I 18:48:54 Writing Layer 0... (LBA: 0 - 1913759)
W 18:49:18 Waiting for buffers to recover...
W 18:49:25 Waiting for hard disk activity to reach threshold level...
I 18:49:26 Writing Image...
W 18:49:52 Waiting for buffers to recover...
W 18:49:58 Waiting for hard disk activity to reach threshold level...
I 18:49:59 Writing Image...
W 18:50:23 Waiting for buffers to recover...
W 18:50:29 Waiting for hard disk activity to reach threshold level...
I 18:50:30 Writing Image...
W 18:50:52 Waiting for buffers to recover...
W 18:50:58 Waiting for hard disk activity to reach threshold level...
I 18:50:59 Writing Image...
W 18:51:27 Waiting for buffers to recover...
W 18:51:33 Waiting for hard disk activity to reach threshold level...
I 18:51:34 Writing Image...
W 18:52:14 Waiting for buffers to recover...
W 18:52:19 Waiting for hard disk activity to reach threshold level...
I 18:52:20 Writing Image...
W 18:52:58 Waiting for buffers to recover...
W 18:53:03 Waiting for hard disk activity to reach threshold level...
I 18:53:04 Writing Image...
W 18:53:45 Waiting for buffers to recover...
W 18:53:51 Waiting for hard disk activity to reach threshold level...
I 18:53:52 Writing Image...
W 18:54:28 Waiting for buffers to recover...
W 18:54:34 Waiting for hard disk activity to reach threshold level...
I 18:54:35 Writing Image...
W 18:55:14 Waiting for buffers to recover...
W 18:55:19 Waiting for hard disk activity to reach threshold level...
I 18:55:20 Writing Image...
W 18:55:54 Waiting for buffers to recover...
W 18:56:00 Waiting for hard disk activity to reach threshold level...
I 18:56:01 Writing Image...
I 18:56:12 Synchronising Cache...
I 18:56:13 Closing Track...
I 18:56:15 Finalising Disc...
I 19:00:43 Image MD5: 8531d28c08e69f2684637939e4c8ead4
I 19:00:43 Operation Successfully Completed! - Duration: 00:12:53
I 19:00:43 Average Write Rate: 1,627 KB/s (1.2x) - Maximum Write Rate: 3,203 KB/s (2.3x)
I 19:00:43 Cycling Tray before Verify...
W 19:00:49 Waiting for device to become ready...
I 19:01:04 Device Ready!
I 19:01:04 Operation Started!
I 19:01:04 Source Device: [3:0:0] Memorex DVD+/-DLRWL1 F16 BWSE (D:) (ATA)
I 19:01:04 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-003-00) (Speeds: 2.4x)
I 19:01:04 Image File: C:\Documents and Settings\Administrator\Desktop\ggs-lsnb.iso
I 19:01:04 Image File Sectors: 355,510 (MODE1/2048)
I 19:01:04 Image File Size: 728,084,480 bytes
I 19:01:04 Image File File System(s): ISO9660
I 19:01:04 Verifying Sectors...
W 19:01:18 Miscompare at LBA: 1337, Offset: 1686
W 19:01:18 Device: 0x1C
W 19:01:18 Image File: 0x14
W 19:01:18 Total Errors in Sector: 1
I 19:01:18 Verifying Sectors...
W 19:01:20 Miscompare at LBA: 1358, Offset: 470
W 19:01:20 Device: 0x1C
W 19:01:20 Image File: 0x14
W 19:01:20 Total Errors in Sector: 1
I 19:01:20 Verifying Sectors...
E 19:01:21 Miscompare at LBA: 1535, Offset: 1678
E 19:01:21 Device: 0x1C
E 19:01:21 Image File: 0x14
E 19:01:21 Total Errors in Sector: 1
E 19:01:21 Failed to Verify Sectors!
E 19:01:21 Operation Failed! - Duration: 00:00:16
I 19:01:21 Average Verify Rate: 191 KB/s (0.1x) - Maximum Verify Rate: 781 KB/s (0.6x)
Thanks!
-Mike
ps. the game disk isn't recognized when I put it into my 360.
and...Before it started burning I got an error dealing with this:
W 18:48:13 User specified layer break position is such that L0 < L1.
W 18:48:16 User specified layer break position is such that all data will be written on L0.
I 18:48:16 User Specified L0 Data Zone Capacity: 1,913,760
It says would you like to continue with the burn anyway? and I said yes.
Post by: SaveFerris on December 26, 2006, 09:05:00 AM
Post by: rahula on December 26, 2006, 12:54:00 PM
P.S inorder to play Xbox games your game must be in supported list and need to update data ( emulator)to you xbox 360 Hdd. Hope this help.
This post has been edited by rahula: Dec 26 2006, 08:57 PM
Post by: SaveFerris on December 27, 2006, 03:23:00 PM
QUOTE(rahula @ Dec 26 2006, 03:01 PM)
So what happened? Can you play the game?. You said you were burning 400 mb game on the DVD+R DL. Correct?. If that is the iso of Xbox one, you need to set Data Zone Capacity to 1913776 not 1913760. This is if you have Hitachi drive on your xbox 360. If you have samsung drive on your xbox 360, you can use just Single layer dvd+r disc. All cheap Ritek, memorex, verbatim works on my hitachi drive. I am using Sony Dru 800a with original firmware. No problem what so ever.
P.S inorder to play Xbox games your game must be in supported list and need to update data ( emulator)to you xbox 360 Hdd. Hope this help.
Thanks for that advice,
Now I'm trying to burn a 360 game using imgburn. I set it to 1913760, popped in the dual layer Verbatim, hit burn...the entire thing went perfect...until it was finalising the disk...
This was the error I got in the log.
I 01:55:11 Synchronising Cache...
I 01:55:12 Closing Track...
I 01:55:13 Finalising Disc...
W 01:57:02 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Session Fixation Error Writing Lead Out
W 01:58:00 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Session Fixation Error Writing Lead In
Thanks!
-Mike Cusano
Post by: SaveFerris on December 28, 2006, 06:25:00 PM
QUOTE(SaveFerris @ Dec 27 2006, 05:30 PM)
Thanks for that advice,
Now I'm trying to burn a 360 game using imgburn. I set it to 1913760, popped in the dual layer Verbatim, hit burn...the entire thing went perfect...until it was finalising the disk...
This was the error I got in the log.
I 01:55:11 Synchronising Cache...
I 01:55:12 Closing Track...
I 01:55:13 Finalising Disc...
W 01:57:02 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Session Fixation Error Writing Lead Out
W 01:58:00 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Session Fixation Error Writing Lead In
Thanks!
-Mike Cusano
Ah well...thanks anyway people..I'll try again tomorrow when I get my pioneer 111D. (IMG:style_emoticons/default/smile.gif)
Any certain firmware I should have for the 111D?
Thanks.
Post by: kray4737 on December 28, 2006, 06:33:00 PM
maybe you should buy the game instead of downloading a pirated copy
Legend.of.Spyro.A.New.Beginning.USA.DVDRiP.XBOX-GGS