xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: milesmowbray on November 03, 2006, 03:41:00 AM

Title: How To Get Sil3112a Pci Card To Flash Hitachi Everytime
Post by: milesmowbray on November 03, 2006, 03:41:00 AM

Hi,

After much fun I finally got my Hitachi 47DJ flashed using a Sil3112A PCI card.  The card came configured for RAID and didn't detect my Hitachi at all, let alone let me put in Mode B with the Slax CD.

To get this to work you need these downloads:

Latest Sil3112a SATALink (no RAID) BIOS:

http://www.siliconimage.com/docs/BIO-003112-xxx-4279.zip

Sil3112A DOS Flasher:

http://www.siliconimage.com/docs/SiI3x12A-...20Utilities.zip

Latest Windows 32bit IDE (no RAID) Driver to match new BIOS:

http://www.siliconimage.com/docs/3x12_x86_13652_logo.zip

1) Boot into DOS and flash the card with the base BIOS not the RAID bios (see readme).
2) Reboot into XP and install the new SATALINK driver.
3) Boot with SLAX 2.0 CD - Don't connect the 360 drive to to card until after SATA bios clears or it freezes.
4) After ModeB message, reset and boot into XP (don't need to wait for login prompt).
5) Drive should now show up in SATA BIOS and XP.
6) Flash away!

This should work with any Sil3112A based SATA PCI chipset card.



 

Title: How To Get Sil3112a Pci Card To Flash Hitachi Everytime
Post by: armysgt74 on November 10, 2006, 05:01:00 PM

Can anyone confirm that this works?

Title: How To Get Sil3112a Pci Card To Flash Hitachi Everytime
Post by: someone12 on November 10, 2006, 08:59:00 PM

i havn't flashed my system yet, but i was able to change the sata card from Raid to ide using those instructions.

Title: How To Get Sil3112a Pci Card To Flash Hitachi Everytime
Post by: milesmowbray on January 02, 2007, 02:34:00 AM

Just to add that apparently some 3112 cards don't support flashing, most do though.  The DOS flasher will report an error if yours doesn't support it, so worth a try.