-
got a problem with my Hitachi 59DJ drive. it says insert game disc into xbox 360 when i put in an original ... i think i screwed up a change of firmware key (xbox drive needed to go itno different xbox.
I tried patching both keys into the firmware but it wont work always same 'insert disc into xbox 360' message whichever xbox i put the drive in, i tried restore.bat but it comes up with an error.
I have a full firmware backup for both drives (broken and new replacment) does anyone know the 'command prompt' i need to type to just overwrite with the backup ie '59FLASH f orig.bin'? as that doesnt seem to work for me
-
QUOTE(northernmonkey @ Oct 28 2006, 01:51 PM)

got a problem with my Hitachi 59DJ drive. it says insert game disc into xbox 360 when i put in an original ... i think i screwed up a change of firmware key (xbox drive needed to go itno different xbox.
I tried patching both keys into the firmware but it wont work always same 'insert disc into xbox 360' message whichever xbox i put the drive in, i tried restore.bat but it comes up with an error.
I have a full firmware backup for both drives (broken and new replacment) does anyone know the 'command prompt' i need to type to just overwrite with the backup ie '59FLASH f orig.bin'? as that doesnt seem to work for me
to restore your drive.. all you have to do is at command prompt (of course command prompt should be at directory where restore.bat and all other files with release are)
all you have to type is restore.bat (driveletter) ie: restore.bat F
if you get an error when typing that in... you are of course gonna have to repeat the error to us on the forum for us to help you any further.
on a side note...
when you did the flash for the first time with garyopa release you did it with a unique 4 digit number.
You SHOULD have or should be able to know what that number was.... and find the folder the opa release made for you while flashing the drive.
Now there are files in there that hold your original.bin (original firmware) and key.bin that hold your dvd key.
these files for one ARE NOT NEEDED when doing the restore process!!
the hitachi firmware PATCHES your firmware on the dvd drive.. it does NOT fully reflash your firmware as the samsungs do. This is why the opa release can simply do a restore to a drive without any other original files.. (it knows what it patched based on the version of the drive.. so it UNPATCHES it to what the original version was)
So.. the problem you have might be the what version number flash are you using... JUNE 59dj drives have problems in certain opa releases.. hence why you should be using the most recent release but I believe the most recent release says to restore the dvd first to original then reflash to current hacked firmware revision.
Again just try to do the restore if I were you I would use the restore from the most current release... it should work fine. Your dvd key should not be wrong because you do not have the option to flash the drive with a file.. it patches the drive for you durring flashing process.
Then come back with what the error is if any when typing out restore.bat F <--- if F is your drive letter.
-
on this example it was 5/10 that errored but its completeley random it could be 7/10 or 1/10 next time, I have the original firmware ie 5555/was.bin for both drives i just want to restore the whole file rather than unpatch it as I have tried restore.bat over 40 times without success. I somehow have screwed up the key in the file hence why I want to restore from original firmware backup rather than unpatch
---------- RES.BIN
done
done
Restoring 1/10 sector 90035000 (Media Detect / SS Read)...
done
Restoring 1b/10 sector 90034000 (Media Detect v2)...
done
Restoring 2/10 sector 90027000 (Challenge Response)...
done
Restoring 3/10 sector 90025000 (Mode B into A)...
done
Restoring 4/10 sector 9001d000 (Game Part Unlock)...
done
Restoring 5/10 sector 9001c000 (Drive Response Table Decrypt)...
DeviceIOControl() failed 0
failed to execute flasher (sense: 05/26/00)
Restoring 6/10 sector 9000a000 (TRAY Tweak)...
done
Restoring 7/10 sector 90006000 (MODE B Tweak)...
done
Restoring 8/10 sector 90003000 (Xtreme Custom Code)...
done
Restoring 9/10 sector 9003e000 (Master Checksum)...
done
Restoring 9b/10 sector 9003F000 (EXTRA Checksum)...
done
Restoring 10/10 sector 90005000 (Stealth Data and Code)...
done
Checking RESTOREd version...
FirmCrypt v0.1 - loser 2005
done
FAIL: Restoring is NOT completed...
System will now REDO the Restoring!
Process will CONTINUE until DONE!!!
Press any key to continue . . .
-
To test if u really have screw up the key, at dos prompt, do a memdump %1 91004F0 1 10 test.bin where %1 is your 360 drive letter. Then look for key.bin under the folder that you had done the flashing the very first time and then compare key.bin with test.bin. They should be the same if your key is okay, else it is messed up ...
This post has been edited by langnao: Oct 29 2006, 03:10 AM
-
they key seemed fine with my backup ... I changed the key again back to the key from the xbox i wanted to put this drive in and checked it using your method and the keys matched and it booted originals, did the flash23s and it boots backups too ... not sure why it wasnt working before only thing i did different was check the key so thanks for the tip as whatever happened its sorted now!
-
QUOTE(northernmonkey @ Oct 29 2006, 05:36 PM)

they key seemed fine with my backup ... I changed the key again back to the key from the xbox i wanted to put this drive in and checked it using your method and the keys matched and it booted originals, did the flash23s and it boots backups too ... not sure why it wasnt working before only thing i did different was check the key so thanks for the tip as whatever happened its sorted now!
Well, glad it turns out fine but interesting cos your case is the first that I read with random restore failure at different parts ...
-
QUOTE(langnao @ Oct 29 2006, 02:36 AM)

Well, glad it turns out fine but interesting cos your case is the first that I read with random restore failure at different parts ...
heh you must not have seen mine with the others then even garyopa has commented on it. (new firmware versions though from like 3 back fixed the issue supposedly.)
-
QUOTE(majik655 @ Oct 30 2006, 10:42 AM)

heh you must not have seen mine with the others then even garyopa has commented on it. (new firmware versions though from like 3 back fixed the issue supposedly.)
Was not in the scene until a few months back. Didn't think I will be getting a 360 but then again things happen ... (IMG:style_emoticons/default/smile.gif)