Post by: Textbook on October 22, 2006, 06:16:00 PM
Post by: shells344 on October 22, 2006, 07:43:00 PM
Post by: langnao on October 22, 2006, 08:03:00 PM
QUOTE(shells344 @ Oct 23 2006, 09:50 AM) 
I THOUGHT IMGBURN WAS BETTER THAN CLONECD BUT I WILL TRY THANK YOU BUT I DO KNOW WHAT I AM DOING BUT IT JUST WONT WORK BUT THANKS
If u had burnt using ImgBurn, then it is not working. My first burnt of enable008 was using ImgBurn and it did not work. The disc will spin up in the drive and it had a hard time reading the disc. Switched to CloneCD and everthing is fine ...
ImgBurn to burn backup game ISO is fine thou ...
Post by: ChazWhite on October 22, 2006, 08:03:00 PM
QUOTE(shells344 @ Oct 23 2006, 02:50 AM)
I THOUGHT IMGBURN WAS BETTER THAN CLONECD BUT I WILL TRY THANK YOU BUT I DO KNOW WHAT I AM DOING BUT IT JUST WONT WORK BUT THANKS
I also am having the same problem. The drive won't let me unlock it, And I am using the DVD DL Enabler0800 Disk.
Post by: shells344 on October 22, 2006, 08:36:00 PM
Post by: Ciderdude on October 23, 2006, 02:18:00 AM
QUOTE(shells344 @ Oct 23 2006, 02:43 AM)
JUST TRYED 100 TIMES AND STILL NO LUCK WHAT IS WRONG WITH THIS DANG THING
Maybe you're using the wrong punctuation in MtkFlash?
Post by: shells344 on October 23, 2006, 02:21:00 AM
Post by: Ciderdude on October 23, 2006, 02:25:00 AM
QUOTE(shells344 @ Oct 23 2006, 08:28 AM)
MTKFLASH W X32.BIN ALWAYS WORKED BEFORE
Thought you were trying to go back to 3.3?So would it not be MTKFLASH W X33.BIN?
Post by: langnao on October 23, 2006, 02:36:00 AM
If it is enable008 issue, try to do a read instead of a write so that you don't screw up the drive in case something happen. I had gone from 3.3 to 4.0 and then 4.1, no issue at all. After each flash from 4.0 onwards, i tried to do a test read using the enable0800 each time. Without the disc, it can't work and with it, it works so everything is fine. But of course, in the first place, u have to make sure the enable0800 disc is working. If all failed, had u tried the 10sec trick using a compatible VIA PCI card? Of course, again test with read ...
Post by: foaley77 on October 23, 2006, 04:38:00 AM
Post by: NookularDeath on October 23, 2006, 07:28:00 AM
you guys must be smoking crack or turds...
ImgBurn is made by the same damn people that put out CloneCD.... has the same chime when a burn is completed..
Post by: langnao on October 23, 2006, 08:51:00 AM
QUOTE(NookularDeath @ Oct 23 2006, 09:35 PM)
ImgBurn works just fine... I've burned all my backsups with it and a Pioneer 111D and a Plextor 716A.
you guys must be smoking crack or turds...
ImgBurn is made by the same damn people that put out CloneCD.... has the same chime when a burn is completed..
I thought ImgBurn was originated from DVD Decryptor? ?Hell, the interface is still the same, just that the DVD ripping was removed ...
Post by: mayonnaise on October 23, 2006, 08:54:00 AM
QUOTE(NookularDeath @ Oct 23 2006, 09:35 AM)
ImgBurn works just fine... I've burned all my backsups with it and a Pioneer 111D and a Plextor 716A.
You're right it works just fine for backups. The Enable0800.iso is a different story though, as its not a backup. I burned it 4 times with ImgBurn and none of them worked (so i couldnt upgrade from 4.0b to 4.1b) but, the first enable0800.iso I burned using cloncd, worked fine..............
Post by: Textbook on October 23, 2006, 11:05:00 AM
Post by: krizalid on October 24, 2006, 03:08:00 PM
I understand that you must either burn with cloneCD or imgburn, I think i´ll choose CloneCD since it seems to work fine, but what I don´t understand is a couple things including how to burn.
You burn to Dual Layer disc, ok, that must be since the security sector is found on the secnd layer?
If so, why is the file so small?
No one ever talks about a layer break for burning this, so that means it shouldn´t be needed?
Is it best to put the 0800 disc before or after you plug the sata to computer?
So let me get this straight.
All you do is put DVD+R DL disc in drive, change booktype (might not be needed please let me know if), burn the iso with clone cd, and follow what ever tutorial i´m suppost to use to either flash again or make windows recognize it? No layerbreak settings, booktype mb, how long will it take to burn?
All help is appreciated, and those those asses who like to say ¨use the search button!¨, trust me, i´ve been looking all over x-s other places and even googling and no luck what so ever, at least this thread is pretty close to what i´m looking for.
thx
EDIT: I did forget to mention I flashed xtreme 4.1b and it´s fully working with originals and backups, but my problems is getting the drive into 0800 to use in windows to make more backups. thx.
Post by: Textbook on October 24, 2006, 08:38:00 PM
For getting the drive to show up in Windows, I always leave the SATA unplugged, pop in the 0800 disc, wait the ten seconds, eject and take out the drive, THEN hotplug the SATA cable back in when Windows is already loading. Works for me anyways.
Post by: xboxk1 on August 11, 2007, 03:37:00 AM