xboxscene.org forums
Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: Tha on September 24, 2006, 05:32:00 AM
-
I try to flah a MS28 drive produced in may, as read on the top of the drive.
My setup:
-Samsung MS28 drive
-Via 6421L chipset, with hexedited MTKflash
-Xecuter Connectivity kit
-Dos bootfloppy
When in dos & i try to read the drive, with the NO SOLDER method as discribed by different people like "Textbook"
and im in dos, i type the following line at the command promt: mtkflash r sata/ m/ orig.bin
then i get the option to choose between 2 drives, the one on the ide channel or the one on the via sata card.
i unplug the drive, press 2 (via card) and the i get the message;
PORT: dcd0, Master/Slave: a0
so there is no pauze a all.... what am i doing wrong guys?
Tnx in advance.