xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Technical DVD-ROM and Modified DVD Firmware Forum => Topic started by: Hatred on June 15, 2006, 03:00:00 PM

Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:00:00 PM
bump again
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Spark on June 15, 2006, 03:02:00 PM
Crossed Wires Method to get to modeB:
Stick 2 pieces of thin wire in the back of the white connector without cutting or opening anything, in the pin 9 and GND (0) position. These wires jam in next to the black ones that are in the same hole.
 

Hold the 2 wires connected together with your fingers before powering on the 360, pushed the power button and disconnecting the wires just a fraction of second after the power light came on. Connect your STA cable then turn on your pc and windows will recognize it.
KEEP THOSE WIRES TOGETHER TOO LONG AND YOU GET AN XBOX-SHAPED BRICK!


That was taken directly from the tutorial, try doing some reading next time.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:05:00 PM
yes i have read that but it doesnt explain how or when to do this i dont understand...
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Spark on June 15, 2006, 03:07:00 PM
Then you're an idiot, don't bother.

That's an extremely difficult procedure, you fuck that up and you brick the xbox, and probably give yourself a good few shocks in the process.

Just work on doing it with Slax.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:10:00 PM
your calling me an idiot.....coming from the guy who cant even get his case open.....you fucking try it then you dumb ass. it doesnt say how it connects or anything useful all i need is some help from someone who has done it
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Spark on June 15, 2006, 03:13:00 PM
You see the difference between you and me is that I don't risk breaking things, the clips on that case are seriously fucking difficult to deal with, but what I don't do is go on a message board whining for more info, if you don't understand or know how to use the information in front of you, then you shouldn't be doing it.

And I think geebee explained that process perfectly in his faq. I would have no problem following those instructions, I just wouldnt do it that way as it's far too risky and 360's cost a lot of money.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:16:00 PM
if you could follow that guide why not follow the one to open your 360 it is so easy make sure the keys points are smaller than the hole by a little bit then push it in and u will hear a click then pull that part of the case further apart and do the other side....IM A 15 YEAR OLD BOY WHO CAN DO IT, and i want this firmware now so im resorting the the wire method it might be easy i could have my friend turn the console on counting from 3 to 1 just after he says 1 ill pull the wire out and it should be in modeb
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Spark on June 15, 2006, 03:18:00 PM
And I'm a 24 year old IT professional who knows not to fuck about with things for no good reason. If I was absolutely sure that this firmware would work on my drive, then I would find a way to get that case open, as it is, the odds are against, so I simply can't be bothered to work on it.

There's your answer right there.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:20:00 PM
im smarter than you, wow your an it professional i bet i know more about It than you already.. What so bad about trying to take your case off look at the picture and make that tool put it in the litle holes push when you hear a click move the case apart and do the other side SIMPLE. I mean peoples intelligence is really going downhill these days...
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: vgopal on June 15, 2006, 03:21:00 PM
QUOTE(Hatred @ Jun 15 2006, 10:23 PM) View Post

if you could follow that guide why not follow the one to open your 360 it is so easy make sure the keys points are smaller than the hole by a little bit then push it in and u will hear a click then pull that part of the case further apart and do the other side....IM A 15 YEAR OLD BOY WHO CAN DO IT, and i want this firmware now so im resorting the the wire method it might be easy i could have my friend turn the console on counting from 3 to 1 just after he says 1 ill pull the wire out and it should be in modeb

read a few more threads, everythings here.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:22:00 PM
have you seen it anywhere in the forums ive looked everywhere
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Spark on June 15, 2006, 03:23:00 PM
Isn't it passed your bedtime ?

When your parents stop wiping your nerdy little arse for you, then come back to me and tell me that a piece of equipment which costs £280 is worth screwing around with. Maybe you do know more about IT than me, I don't to be honest, I get paid, you don't, that's life, fuck off.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: vgopal on June 15, 2006, 03:24:00 PM
QUOTE(Hatred @ Jun 15 2006, 10:29 PM) View Post

have you seen it anywhere in the forums ive looked everywhere

read the friggin tutorial
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:32:00 PM
erm no i dont think so you stupid tosser, i make my own money repairing computers and modifying games consoles. I can afford to screw arround with it, just because you struggle to earn a living doesnt mean we all do!

erm no i dont think so you stupid tosser, i make my own money repairing computers and modifying games consoles. I can afford to screw arround with it, just because you struggle to earn a living doesnt mean we all do! And if you read the earlier post vgopal i said i have checked everywhere and read the tutorials thats why i am asking here.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: vgopal on June 15, 2006, 03:35:00 PM
well if youve read the tutorial and still cant do it i cant see how anyone can help
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:40:00 PM
Well spark you may earn more than me but i bet you didnt have what i have when you were my age i have an my own ebay account with over 600 feedback and i make around £300 a week. so shut your fucking mouth and go cry in the corner.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Spark on June 15, 2006, 03:43:00 PM
Why would I go and cry in the corner ? I couldn't give a shit.

And for the record, no I wasn't earning £300 a week at your age, I was out enjoying myself and having sex like a normal person, just because you're a fucking loser, don't take it out on me.

And by the way, I wouldn't advertise that ebay account if I were you, since the broke the law when you got it, Ebay is for over 18's only, it's no wonder it's going down the fucking pan now.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Hatred on June 15, 2006, 03:45:00 PM
yes im a loser....riggghtt thats why i have more friends than you will ever have, a better girlfriend than you will ever have and i have a better life than you will have! Your a retard ok, you should go "drop" off the edge of the world like a dumb little prick
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Spark on June 15, 2006, 03:47:00 PM
How do you know any of this ? You don't even know me.

I don't want a flame war with you, I gave up fighting with teenagers a long time ago. For what it's worth, I apologise for calling you an idiot, now let's drop it OK.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: vgopal on June 15, 2006, 03:48:00 PM
QUOTE(Hatred @ Jun 15 2006, 10:52 PM) View Post

yes im a loser....riggghtt thats why i have more friends than you will ever have, a better girlfriend than you will ever have and i have a better life than you will have! Your a retard ok, you should go "drop" off the edge of the world like a dumb little prick



everyone stfu, hatred go hax0r you 360, the tuts on the 2nd page.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: LilaQ on June 15, 2006, 04:19:00 PM
What's so damn unclear in the tut? And it's also been explained a hundred times in several forums. If that's not enough information for you, you're just to fuckin dumb and should let it be..
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: aehirst on June 15, 2006, 05:05:00 PM
Topic creator should learn how to follow instructions and spark should now better to fight with stupid kids who think they can fight with a keyboard.
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: NoVA iS SiCK on June 15, 2006, 06:15:00 PM
QUOTE(Hatred @ Jun 15 2006, 08:08 PM) View Post

do you know what would be good? IF you would shut your fucking grill FLAMERS!! die, going to try slax yet again after hours of trying

You have already annoyed multiple forum members. And if you know more than Spark, the IT pro, shouldn't you know a thing or two about linux, rather than stumbling over code for "hours".
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: NoVA iS SiCK on June 15, 2006, 06:41:00 PM
Neat.
/thread
Title: How To Get My Drive Into Modeb Using The Wire Method...
Post by: Spark on June 16, 2006, 02:54:00 AM
QUOTE(aehirst @ Jun 16 2006, 12:12 AM) View Post

Topic creator should learn how to follow instructions and spark should now better to fight with stupid kids who think they can fight with a keyboard.



Word, I dont know what the fuck I was on last night.

I'm blaming the hayfever. wink.gif