xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => Software Exploits Development / Research => Topic started by: BigDragonCoool on December 02, 2009, 01:40:00 PM

Title: 3rrod After Flashing Zephyr Hack
Post by: BigDragonCoool on December 02, 2009, 01:40:00 PM

i dumped my nand first time and got all error then i used resistors and got 6 errors....so since people tell me that some error is normal and i read all i need was the first 50 blocks i went along and flash to xell....but now i have 3rrod....so i try to reflash back to the nand that gave me 6 errors in nandpro (which were E7 and above btw) and i still have 3 rrod.....is there something wrong with the paste between cpu and gpu or did i fuck up on the dumping?

Title: 3rrod After Flashing Zephyr Hack
Post by: fred444 on December 04, 2009, 01:01:00 PM

are you sure you use -w16 and not -W16 when flashing??

This post has been edited by fred444: Dec 4 2009, 09:01 PM

Title: 3rrod After Flashing Zephyr Hack
Post by: shummyr on December 12, 2009, 08:38:00 PM

make sure none of your wires have come loose, if so sometimes that will cause errors or red rings

This post has been edited by shummyr: Dec 13 2009, 04:39 AM