Post by: captianmo81 on March 11, 2008, 01:04:00 AM
Sense Error: 5 / 21 / 02
INVALID ADDRESS FOR WRITE
CDB: WRITE(10)
0x2A 00 00 04 34 00 00 00 10 00
Cancelled at LBA: 0x00043400 (275456)
Syncing Cache
Closing Track
Finalizing Disk
Action: Close Disk
Sense Error: 5 / 72 / 04
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
CDB: CLOSE TRACK/SESSION
0x5B 01 05 00 00 00 00 00 00 00
Finalize Disk Failed
Getting media info [D]
Media Type: Not Present
Write failed
What the hell am I doing wrong? I am getting so frustrated that I just wanna break the freakin chip in half. Please help if you can.
Post by: Heliopolis on March 11, 2008, 08:06:00 AM
QUOTE(captianmo81 @ Mar 11 2008, 05:04 PM) 
I have tried every method that I have found and still no luck. The last trail was with XBC, merged the SS with the iso and burnt it but then got this error...
If you have followed similar instructions to this link http://forums.xbox-s...p?sho...&st=0 then it sounds like you have a faulty burner.
Post by: letsmod on March 11, 2008, 11:23:00 AM
all you have to do is dump the title in XBC and follow my guide
are you using a Kreon ready drive?? and using Kreon 1.0 ??
Post by: captianmo81 on March 11, 2008, 01:43:00 PM
Post by: captianmo81 on March 11, 2008, 11:16:00 PM
Post by: captianmo81 on March 12, 2008, 08:30:00 PM
Post by: Heliopolis on March 13, 2008, 04:13:00 AM
QUOTE(captianmo81 @ Mar 12 2008, 03:16 PM)
Ok, I have just ordered a Sumsung DVD drive with Kreon firmware already flashed on it, and I have also ordered a Pioneer 112d burner. Once I get these drives, correct me if I am wrong, I will be able to backup my games with XBC using the Samsung drive, then burn the ISO using the Pioneer drive and ImageBurn with Verbatim DVD+R DL discs and have a properly burnt and working backup of my game, for use with NME2 modchip, without having to do any of the SS.bin mergers or anything else, right?
You have to re-insert the ss.bin for backups to work on the NME2.
Follow the link to my guide a few posts back. It will take you through all you need to do.
Post by: captianmo81 on March 13, 2008, 06:44:00 AM
Post by: Technitian3 on March 13, 2008, 07:33:00 PM
Post by: captianmo81 on March 13, 2008, 09:16:00 PM
Post by: Heliopolis on March 14, 2008, 08:46:00 AM
QUOTE(captianmo81 @ Mar 13 2008, 10:44 PM)
The directions you posted are revolved around having a Samsung DVD-ROM drive flashed with Kreon firmware and a Pioneer 111D or 112D burner, right? I have followed your guide before, but I did not have either one of those drives. I used ISO's that I got using the wxripper(hotswap, that was the correct size) and my memorex burner, I also tried it with another DVD-DL burner and still no luck, so I am hoping that your guide is meant to be used with a Samsung DVD-ROM flashed with Kreon firmware and a Pioneer 112D durner because I just ordered those the other day.
I do have a Samsung SH-D162C kreon 1.00 drive, but I use the DVD burner that I already had. A Lite-On LH-18A1P. From my experience the discs you use are more critical than the burner. I have been using Verbatim DL+R discs with great results.
QUOTE(captianmo81 @ Mar 14 2008, 01:16 PM)
Yes I have but still no luck. When people say I have to extract the SS.bin and put it back in what is that doing if the SS.bin was already there and I am just putting it back in?
You are re-inserting the ss.bin at a new location for use with the NME2.
Also, I suggest you use SS Merger over NME associator as it has an inbuilt function to confirm the MD5 of the required ss.bin. Many times you will extract a ss.bin file that is corrupt. When using associator you don't know whether the ss.bin is good or not.
Post by: captianmo81 on March 14, 2008, 10:00:00 AM
Post by: letsmod on March 14, 2008, 09:31:00 AM
if you have a hitachi drive in your console, it still has issues with Pioneer Burners!!
My Guide
Post by: captianmo81 on March 18, 2008, 12:07:00 AM
Post by: Heliopolis on March 18, 2008, 02:38:00 AM
QUOTE(captianmo81 @ Mar 15 2008, 02:00 AM)
Does it automatically insert it in the new location or do I have to specifiy the location? Also, I do use verbatim DVD+R DL disc.
The software will take care of it once you select XBox 360.
QUOTE(captianmo81 @ Mar 18 2008, 04:07 PM)
... I know, from glancing at it, that Schtrom360Xtract doesn't have all the features that XBC does so I am figuring that I will just finish the process with XBC and hope for the best.
I would suggest you use XBC to extract and re-insert the ss.bin. Weird that it wouldn't recognise the drive.
Post by: FATGUTS on March 18, 2008, 08:15:00 PM
question 1, are you using an original when you try to make a backup using XBC?
i ask this cuz if its a bad backup burn you wont be able to extract the image thru XBC, use the original it should come up fine, if not working still, go into your network devices and disable that drive wait a minute, then re-enable it. tho thats never happened to me im pretty sure a bad burn wont be able to be extracted thru XBC, just use the original.
2nd, if you are able to buy DL DVD+R discs from different brands do that, if you are able to just get singles or 3 packs of a few diff kinds i would say try it.
i went from using HP DL DVD+R 2.4x from 3 pack in jewel cases to the 15 pack spindles, couldnt get a single burn from the spindles to ever work properly, same brand of disc and look identical to eachother, but the spindle discs wont ever work, only the 3 pack that came in jewel cases worked perfect every time.
the NME 2.0 seems like it could of still used some working on before being released to market, but too late for that now, takes some time to get everything figured out to what will work for you so patience is nessesary, try a few different disk types, also im not sure what drive you have i have a Hitachi 79FK
that in order to boot up anything requires me to NOT have soldered the J1 jumper, if you put solder on that spot, try and remove it, when i did my original install i forgot to fill it with solder and my backups worked, when i realized i left that un filled i opened it all backup, and filled it, closed it all up, only to find out that it would no longer play either burns, or originals, removed the solder from the J1 jumper spot on the chip and everything went back to working fine again, like i said seems like the NME 2.0 has quite a few faults that should of been addressed before the chip went out for sale but it seems with some patience, trial and error will eventually lead you to success now that i know what kind of discs work for burning i get them every time no more coasters
i use SH-D162C w/kreon firmware
and pioneer 111D for burns
for extractions i use XBC and then use SS merge and NME associator to turn images into NME compatable and burn with IMG burn
Post by: captianmo81 on March 19, 2008, 07:32:00 PM
Post by: letsmod on March 24, 2008, 12:19:00 PM