xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => General Technical Hacking Discussion => Topic started by: Pseudo99 on November 04, 2012, 08:04:00 PM

Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: Pseudo99 on November 04, 2012, 08:04:00 PM
Why do you have to remove the CPU? Can't you just scrape the line and solder to that? Or scrape and create a pad at the hole on the other end?
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: jm206 on November 04, 2012, 10:56:00 PM
There IS no line to scrape anymore, look carefully at the pictures.

That's why they had to remove the CPU and run a wire under it.

Picture 3 shows where it used to connect, you can see in picture 4 that those points aren't connected to the CPU anymore.

MS may not be able to completely kill RGH, but this would wipe out any chance for most modders to glitch the new consoles if they have to have to reball and reflow each time.
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: vb_encryption_vb on November 05, 2012, 04:56:00 AM
Time to buy a reflow/reball machine.
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: gamesquest1 on November 05, 2012, 05:00:00 PM
i actually dont see this as anything major, im sure tx and co. will enjoy pushing out a new rgh toy, namely a little precision cutout clip that clips in and under the cpu to gain post out, luckily the post out point is on the side of the cpu so should be fairly easy to design
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: sudburymods on November 05, 2012, 06:25:00 PM
There is no need to remove the cpu\gpu , using a thin wire you can solder it to that ball. Of course only for the experienced.
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: iglitare on November 07, 2012, 06:11:00 AM
are you talking about the new xbox720 or whatever it will be called?
And if Yes, then why are you talking about it here?

But BTT
i agree with sudburymods. Could be tough, but it is possible.
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: warbeast on November 07, 2012, 01:51:00 PM
i say a good solderless U shape device each end of the u goes to the left and right xclamp hole with the bottom of the U having the solderless pin then maybe 2 new Standoff Screws

untill ms start to plaster it with glue like they did to try and stop rrod on fats
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: riahc3 on February 11, 2013, 05:50:00 AM
Any updates on this revision? Is it exploitable now?
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: BoNg420 on February 11, 2013, 06:30:00 AM
QUOTE(riahc3 @ Feb 11 2013, 07:50 AM) View Post

Any updates on this revision? Is it exploitable now?



Yes, all Corona are exploitable now. Here is a way to identify your Corona board

http://team-xecuter....tion-solutions/

Here is a part you need for this V3

http://www.vgcrepair...postfix-adapter

QUOTE(warbeast @ Nov 7 2012, 03:51 PM) View Post

i say a good solderless U shape device each end of the u goes to the left and right xclamp hole with the bottom of the U having the solderless pin then maybe 2 new Standoff Screws

untill ms start to plaster it with glue like they did to try and stop rrod on fats


Wonder if Xecuter used your idea to make their Postfix adapter somewhat lol
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: BoNg420 on March 07, 2013, 11:14:00 AM
QUOTE(lettuce @ Mar 7 2013, 11:31 AM) View Post

Do we have any manufacture date of console that have v3/4 corona boards?? Im after a v1 or v2 so if i could get a rough manufactures date of when the v3 started appear i know what dates to avoid?

not to sure on when V3 started to be seen, but corona first came out around Aug/Sept 2011
Title: New revision of Corona Motherboard (v3 / 16mb) spotted in the wild
Post by: jaysismyson on July 24, 2013, 02:46:00 AM
aion kinah kaufen can't wait for the new xbox, probably won't even be JTAGABLE.