xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => General Technical Hacking Discussion => Topic started by: drewZen on February 16, 2010, 05:52:00 PM

Title: Recover Original Nand From An Injected Xbr Image?
Post by: drewZen on February 16, 2010, 05:52:00 PM

I have a buddy that bought a jtagged zephyr that has xbr_3 installed... works fine but does not have the original nand dump. Anyone know of a way to extract the original nand from the xbr image? doesnt seem likely but had to ask...
So say a newer xbr comes out... there is no way to update with out the original nand correct?

Title: Recover Original Nand From An Injected Xbr Image?
Post by: farmboynick on February 16, 2010, 06:33:00 PM

when a newer version of xbr is released you still dont need the orig dump all you need is the kv (1 1) & config (3de 2) sections and you can dump them from his current xbr nand

Title: Recover Original Nand From An Injected Xbr Image?
Post by: Haruk on February 16, 2010, 09:57:00 PM

it's uber simple to update xbreboot, I actually just did it today after realizing I had 8955_1 on. All I had to do is run flash360 and flash in xbr_3, there's an option in the process that extracts your kv and config for you and was all finished in a matter of seconds

Title: Recover Original Nand From An Injected Xbr Image?
Post by: abrute on February 17, 2010, 03:50:00 AM

QUOTE(drewZen @ Feb 17 2010, 01:52 AM)

I have a buddy that bought a jtagged zephyr that has xbr_3 installed... works fine but does not have the original nand dump. Anyone know of a way to extract the original nand from the xbr image? doesnt seem likely but had to ask...
So say a newer xbr comes out... there is no way to update with out the original nand correct?

you don't need the original to update xbr, but you could always use a donor nand and inject your kv/config. If you need a donor zephyr nand, pm me.