xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => General Technical Hacking Discussion => Topic started by: kingpip on January 31, 2010, 11:34:00 PM

Title: Tjag Alternating Red/green On The Ring Of Light
Post by: kingpip on January 31, 2010, 11:34:00 PM

read nand ok and injected kv and gonfig ok as well wrote tho board but when power on 360 flashes red and green top 2 then bottem 3 and there is no pic as well

Title: Tjag Alternating Red/green On The Ring Of Light
Post by: YoungGeekGuy on January 31, 2010, 11:37:00 PM

First off it's a JTAG and second there must be something wrong with the KV you injected.

Title: Tjag Alternating Red/green On The Ring Of Light
Post by: kingpip on February 01, 2010, 04:49:00 AM

re added te key valt agen and flashed just the kv.bin to the chip via lpt: and working now anouther thing i have found is that if i turn on the xbox with the eject button i get thering of fire 3 red lights

Title: Tjag Alternating Red/green On The Ring Of Light
Post by: arielzadi on February 01, 2010, 05:12:00 AM

that means that xell files are not correct i sugest you reflash xbr completly using flash360 this should fix any issues

Title: Tjag Alternating Red/green On The Ring Of Light
Post by: Antman1 on February 01, 2010, 05:18:00 AM

make sure you are also using the latest version of nandpro,  had same issue and it was fixed with newest ver of nandpro.

Title: Tjag Alternating Red/green On The Ring Of Light
Post by: BladeWing on February 02, 2010, 09:10:00 AM

QUOTE(Antman1 @ Feb 1 2010, 12:18 PM)

make sure you are also using the latest version of nandpro,  had same issue and it was fixed with newest ver of nandpro.

THIS^^

I had numerous problems with running JTAG, then i switched to Nandpro20B, and it worked perfectly.