xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => General Technical Hacking Discussion => Topic started by: AZImmortal on January 05, 2010, 01:35:00 AM

Title: Question About Jtag Cable
Post by: AZImmortal on January 05, 2010, 01:35:00 AM
If you started out with a cable that had both a male and female end, then when you plug those ends together, the same color wires will still be connected to each other.
Title: Question About Jtag Cable
Post by: craz3d on January 05, 2010, 07:32:00 AM
Just be sure to keep the same color convention and you'll be fine.
Title: Question About Jtag Cable
Post by: ahmer on January 05, 2010, 08:27:00 AM
i started out with the same cable and cut it in half like in the guide, so male on both ends?
Title: Question About Jtag Cable
Post by: brando56894 on January 06, 2010, 12:23:00 AM
yea, its a male end on both pieces of cat 5, just make sure the colors match up.
Title: Question About Jtag Cable
Post by: XBoxgeek on January 06, 2010, 01:12:00 AM
QUOTE(Downcastnut @ Jan 6 2010, 07:58 AM) View Post

if its male on both sides then connect them together with a coupler and you will be fine. no need to switch wires. just match the colors.


Well that depend on whether he is using a patch or crossover cable. If in doubt use a multimeter to check continuity.