xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => General Technical Hacking Discussion => Topic started by: TBAYJ on January 03, 2010, 12:59:00 PM

Title: Non Official 360 Hdd Not Shown Jtag
Post by: TBAYJ on January 03, 2010, 12:59:00 PM
well i must be missing something , have xbr_3 -jtag all is good ..if i read right u could use any sata hard drive you like ?

well i tried an 80 gig seagate , didnt show up in dash ....so connected to pc deleted partion w/partion magic
connected to 360 no luck what am i missing does it have to the usuall size ( 20 , 60 ,120 , 250 ? )

Title: Non Official 360 Hdd Not Shown Jtag
Post by: Ranger72 on January 03, 2010, 01:33:00 PM
Put hard drive in the 360 hard drive port then go to setting and select the memory device and select format. It may take a while but your 360 will format the drive then it can be used.
Title: Non Official 360 Hdd Not Shown Jtag
Post by: kingpickle on January 03, 2010, 02:00:00 PM
QUOTE(TBAYJ @ Jan 3 2010, 02:59 PM) *

well i must be missing something , have xbr_3 -jtag all is good ..if i read right u could use any sata hard drive you like ?

well i tried an 80 gig seagate , didnt show up in dash ....so connected to pc deleted partion w/partion magic
connected to 360 no luck what am i missing does it have to the usuall size ( 20 , 60 ,120 , 250 ? )


Not any sata HD. Laptop drives require less power and should work. If you're trying a 3.5" drive you'll need to feed it a 12v line (I dont think the xbox's port supports 12v). If you are trying a laptop drive, your xbox wont use it till it's formated which you can do through the nxe settings.


This post has been edited by kingpickle: Jan 3 2010, 10:07 PM
Title: Non Official 360 Hdd Not Shown Jtag
Post by: TBAYJ on January 03, 2010, 02:31:00 PM
yep was using 3.5 slapped 12v to it now 360 sees it , goto format ..gets to enter serial # i push a button to do so and blue screen pops and shuts quick , cant get past that ?? any ideas ?

edit : i cant format my own 360 hdd (official same error) xbr error ? missing my console serial ?
using xbr_3

This post has been edited by TBAYJ: Jan 3 2010, 11:06 PM