xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => General Technical Hacking Discussion => Topic started by: syntaxerror329 on November 04, 2009, 08:35:00 AM

Title: Newbie Questions For Wave 4
Post by: syntaxerror329 on November 04, 2009, 08:35:00 AM
1 - Benq v1.41 has a non stealth

2 - Blaster wont make anything easier. You will still need to use the same tools on your PC.

3 - It will install the same way
Title: Newbie Questions For Wave 4
Post by: syntaxerror329 on November 04, 2009, 08:44:00 AM
Yes i checked xbins before i replied. They even have a multispeed version but if your drive can handle 12x then go for it.
Title: Newbie Questions For Wave 4
Post by: syntaxerror329 on November 04, 2009, 10:00:00 AM
QUOTE(CORRUPT27 @ Nov 4 2009, 11:56 AM) View Post

Sweet my only concern was that i thought certain games would not play on 1.41 like hawx. But I should be fine so perfect. Thank you so much



Hawx was the first wave4 game. It wont play on iX1.41 w/ stealth but it will play on iX1.41 without stealth firmware.


Title: Newbie Questions For Wave 4
Post by: syntaxerror329 on November 04, 2009, 10:14:00 AM
QUOTE(CORRUPT27 @ Nov 4 2009, 01:02 PM) View Post

and will MW2 I know i am being a pain. But i also read that someone had an issue 1.41 not playing mw2. I know its not out yet just want to make sure. Thank you for taking the time to answering my stupid questions.


As long as you use the NON STEALTH version you should be able to play all games and all Waves including all future waves.

Try it and let us know how it works for you but i expect you will get the result you are looking for. If it doesn't work for some reason at least you can always flash it again to ix1.61

Make sure you have your key! Don't plug power in upside down and you will be playing all your games soon!
Title: Newbie Questions For Wave 4
Post by: CORRUPT27 on November 05, 2009, 07:51:00 AM
Hey Guys,
Thanks for all the help. I had a terrible time flashing this drive. I was expecting it to be so easy but WOW! Since last time was easy. So first i downloaded the 1.41 non stealth firmware from xbins and attempted to use iprep and received an error that firmware was not valid. I downloaded the xml file definitions and still nothing.  So i tryed iprep 101, same issue and also a DTD error. I could not believe my luck this worked before. My jungle flasher does not work on my pc. It just does not read the xbox.
So i had a buddy's pc over and decided to give it a try on his. Both ipreps gave me the same error invalid firmware even though they are valid. So now i tryed jungle flasher. It was able to see the drive i was so excited but it would just freeze. It would put the xbox into vendor mode but then freeze during the reading of the banks. I tryed the 2 ports on the via card and the same thing. I was going to give up,
Luckly i found instructions on creating the custom firmware with the makefirmware batch and just adding the firmware to my current floppy from my old 1.5 flash. I ran the iprep and was able to flash the drive.

This is why i dont want to bother with the 1.61 firmware. I just dont want to go through this updating nightmare lol. But anyways i have 1.41 8x and it works nice. my buddy had a copy of mw2 and it worked fine.

Thanks guys for all the help. If you guys have any addvice for me on why i have so many issues with iprep and jf please let me know. And i hope this post helps someone else out.  Sorry i cant find the link for the manual update.