Post by: Mgmedick on December 11, 2007, 02:18:00 PM
the version of firmware on there was 5.3
i tried to reflash..it appeared to work, but the drive was in the 3 red lights when i did the flash. I'm still getting 3 lights of death. Is there anyway i can tell if my drive is bricked
Post by: Mgmedick on December 11, 2007, 02:31:00 PM
Post by: Xitherun on February 02, 2020, 09:39:00 PM
QUOTE(Mgmedick @ Dec 11 2007, 12:18 PM) 
hey everone. about 4-5 months ago i softmodded an ms28. It worked up untill now..i was playin a pal release of assaisans creed...froze up...then rebooted it ...then 3 lred ights of death!!!!
the version of firmware on there was 5.3
i tried to reflash..it appeared to work, but the drive was in the 3 red lights when i did the flash. I'm still getting 3 lights of death. Is there anyway i can tell if my drive is bricked
I doubt your drive is the culprit of the 3 RROD.
Read through this topic; it talks all about the 3 RROD, and you could use the information to narrow down what caused the problem.
Post by: silentshadow03 on February 03, 2020, 10:15:00 AM
i went through the updating to ixtreme 1.4 @ 12x using 1prep
buh now i can't even play any games on my 360 not even originals
wat can i do
and i also deleted my original bin file
This post has been edited by silentshadow03: Yesterday, 06:28 PM
Post by: Mgmedick on February 03, 2020, 04:10:00 PM
I'm getting specific error 1023 so its the drive apparently
when i flash the drive using iflash XXXXXXXX XXXXX it works for all banks, but it goes to 3lrod in middle of the bad flash every time, and so when i reboot no change.
if i just try sending the orig.bin or hacked.bin over using mtkflash w/m, it says file not found, even though they are on the iprep flash drive. I have them under backups/xxxxxxxxxx/xxxxx (specfic xbox id)
also i got em under 'backups/'serial'/serial'. I can't think of how to get the box out of error so i can flash the drive, and i don't understand why iflash works but the mtflash w/m command doesn't find the files.