xboxscene.org forums

Xbox360 Forums => Xbox 360 Hacking Forums => General Technical Hacking Discussion => Topic started by: jtom617 on July 07, 2006, 10:22:00 PM

Title: The Beers Are On Me If Anyone Can Help
Post by: jtom617 on July 07, 2006, 10:22:00 PM
So since it is flashed with the wrong version of the firmware, it still wont boot the games, Im almost sure you can just do the flashing process again, because all the firmwares will let you go back to the original state.  pop.gif NOTE:  beers allready going on for me smile.gif
Title: The Beers Are On Me If Anyone Can Help
Post by: Seeker2002 on July 11, 2006, 10:39:00 AM
QUOTE(handsin99 @ Jul 7 2006, 08:35 PM) View Post

here goes guys

i accidentally flashed a hitachi 46 drive with the hitachi 47d hached firmware

now since doing this the drive will no longer be recognised by windows and gives error 64 when connected to xbox360

I have the firmware and org.bin that was dumped when i did the flash so from what i can see is i have the orginal firmware but have no way of getting to flash back to the drive

i have tried a hot swap with another hitachi drive on my pc but this does not work so if anybody has any ideas then your help would be very much appreciated

thanks guys

ps i would of thought a few people might of done this so any suggestions please let me know


As of right now I don't think this is possible to reflash a bricked Hitachi drive.. sad.gif  I have the same problem and I've tried everything I could think of with no positive results. When I try to do the hotswap method with another good xbox 360 dvd drive or SATA HDD just to get it a recognized and a drive letter assigned, whenever I do the switch and try to flash the bad drive I always get the I/O error.  The  I/O is the communication channel among hardware devices. Somehow a bad flash screws up the dvd drive's ability to communicate between the two devices.. grr.gif
Title: The Beers Are On Me If Anyone Can Help
Post by: bonevichio on July 11, 2006, 12:19:00 PM
You should probably get an external programmer or have someone unsolder the chip and flash for you with your original FW.

You might wanna contact this guy:
http://www.kev.nu/36...update_09_04_06

same problemo...

This guy says he can help:
http://www.xboxhacke...hp?topic=1515.0