Post by: skunk1111 on June 06, 2006, 03:47:00 PM
Then agian i boot in dos and flashed the drive with my new bin(everything was goin to plan so far).Then i got my 360 tookit to my tv and set it up wanting to see if it booted ok etc,and it did.So then i took a orignal game of ghost recon put it in the drive and i got the message PLease put this disk in an xbox 360:SH$T FLAP O NO!!!
so back to the pc and i flashed my drive with my orig.bin and everything is fine and back to square 1, games work etc!
anybody had this problem or know what ive done wrong here?
Post by: hawke12 on June 06, 2006, 04:22:00 PM
This post has been edited by hawke12: Jun 6 2006, 11:26 PM
Post by: skunk1111 on June 06, 2006, 04:54:00 PM
QUOTE(hawke12 @ Jun 6 2006, 10:53 PM) 
you have to use a modified 'EXTREME.bin' to use with KDX....
CHEERS M8 .
Goin to have a break and start a fresh in the morin with a hex editor program.
Post by: homelesschicken on June 06, 2006, 06:52:00 PM
just in case you dont know how...
1. open ORIG.BIN (whatever u named the original firmware) with Hexedit
2. scroll down to line 4000
3. copy lines 4000-4200
4. now open XTREME.BIN and paste to line 4000-4200
5. save modified bin to floppy (make sure u add .bin to the file name)
6. reflash and it should work.
Post by: skunk1111 on June 07, 2006, 04:14:00 AM
Thats what its all about though hey .I couldnt use hhd hex editor for some reason i was gettin the dreaded please put this disk in a xbox 360! so i turned to 101 editor which for me was simple to use.
Just like to say thanks for the replys people i could never of done this by myself! (IMG:style_emoticons/default/biggrin.gif)
Post by: techbox360 on June 07, 2006, 10:45:00 AM
I have an HP640C DVD-Burner, and I even updated the firmware from a link included in one of these tutorials to the JS04 firmware.
I think my problem may lie in setting the booktype to DVD-ROM... which I tried to do with DVDInfoPro, but the version I get off of their site has different menus than what the tutorials show (as usual...).
I set the booktype in DVD Decrypter... I even tried to backup my copy of Blazing Angels with Clone CD (making my own SS file following the tutorials and injecting it, but it comes up as "Unrecognized Disc" in my 360 after flashing the DVD Drive with the modified.bin- probably because of the booktype crap).
Also, my 360 won't play Originals with the modified.bin on the DVD drive... it says "Please put this disc in a Xbox360 system" (or something like that).
PLEASE HELP! Any info will be appreciated.
Post by: monkeyflungpoo on June 07, 2006, 10:18:00 AM
QUOTE(techbox360 @ Jun 7 2006, 11:16 AM) 
I backed up my copy of Fight Night 3. I added the SS patch from the .rar release pack. I then modified the game.dvd file with notepad, leaving just the "image.000" text, and putting the numbers into DVD Decrypter. Finally got DVD Decrypter to recognize the edited .dvd file, and went to burn. At 54% I got a writing error: saying that I could not write to the specified sector (or something to that effect).
I have an HP640C DVD-Burner, and I even updated the firmware from a link included in one of these tutorials to the JS04 firmware.
I think my problem may lie in setting the booktype to DVD-ROM... which I tried to do with DVDInfoPro, but the version I get off of their site has different menus than what the tutorials show (as usual...).
I set the booktype in DVD Decrypter... I even tried to backup my copy of Blazing Angels with Clone CD (making my own SS file following the tutorials and injecting it, but it comes up as "Unrecognized Disc" in my 360 after flashing the DVD Drive with the modified.bin- probably because of the booktype crap).
Also, my 360 won't play Originals with the modified.bin on the DVD drive... it says "Please put this disc in a Xbox360 system" (or something like that).
PLEASE HELP! Any info will be appreciated.
it will not work bc you flashed your system wrong, reflash it correctly for them to work
Post by: hawke12 on June 07, 2006, 10:32:00 AM
http://www.videohelp...derby=Name#next
Hope this helps.
Post by: techbox360 on June 07, 2006, 11:19:00 AM
QUOTE(monkeyflungpoo @ Jun 7 2006, 12:25 PM)
it will not work bc you flashed your system wrong, reflash it correctly for them to work
How do you mean I flashed the system wrong... and how would I flash it correctly?
I took the xtreme.bin, took the info from my original.bin (lines 4000-4200) and inserted them into the new modified_xtreme.bin, and flashed that as my firmware to read backups.
Thanx Hawke12 & monkeyflungpoo for the info... I'll try and re-read AGAIN, and research some more. (IMG:style_emoticons/default/smile.gif)
Post by: techbox360 on June 07, 2006, 12:16:00 PM
Should my modified firmware to play backups also play Originals?
Post by: calvin940 on June 07, 2006, 12:28:00 PM
QUOTE(techbox360 @ Jun 7 2006, 02:47 PM)
Quick Question:
Should my modified firmware to play backups also play Originals?
Yes. The modified firmware should play both. From the sounds of what you say, it sounds like a classic case of not pasting in your key properly. As a test, if you cannot play originals with the modified FW, then you have done something incorrectly. It may be the tool you are using and the copy/pasting. I use Hex Editor 3.1.2 by HHD. I have done 5 drives now and it has worked flawlessly each time.
Cal
Post by: skunk1111 on June 07, 2006, 01:59:00 PM
http://www.sweetscape.com/download/
This post has been edited by skunk1111: Jun 7 2006, 09:04 PM
Post by: techbox360 on June 07, 2006, 02:33:00 PM
I am at work now, pulling my hair out until I get off, so I can go home and try it.
Hopefully it is just the copy and pasting... sounds good enough... I'll let everyone know.
Thanks... (only 1 hour, 10 minutes left til I'm off.... not counting or anything...)