xboxscene.org forums
Shopping Forums => Modchip Installers / Firmware Flashers => Topic started by: animex2 on May 02, 2004, 10:13:00 AM
-
Hey all! I will be doing Xbox Customizations in the Buffalo/Western New York Area...
DOING 1.0-1.5
(note - 1.0-1.2 with Older Chips, 1.0-1.5 with newer chips, if confused, just ask)
NEW LAYOUT and URL!
see http://phear-modding.co.nr/
What I mean by Xbox Customization is -
Modchip Instillation
HDD Instillation
LED Lighting
Software Instillation
Everything is fairly cheap or similar prices for all the other sellers I have seen...
Installations -
Note On Installs - I will do 1.0-1.2 On Older Modchips (eg, dont need to use alt LFRAME) and 1.0-1.5 on all current modchips!
Installing Chip (you supply) + Flashing with Cromwell + Installing EvoX- $25 (If you do not have a chip, I can order you for $10 + Price Of Chip)
Hardware Mods-
HDD Activity Light- $10
12V Fan Mod- $2.50
Drilling/Installing LEDs on controller port numbers (light alaways on) - $2.50 per port
Drilling/Installing LEDs on controller port numbers (like on when controller plugged in) $5 per port
Getting Out and Clearing Jewel - $10
Cutting Hole for Jewel Lighting- $5
Making a LED Halo (for LED Lighting)- $5
*DEAL* LED Jewl Coustomization Deal - Getting/Clearing Jewel, Cutting Hole, Lighting Jewel with LED Halo - $15 Alone, in this package for $10
Changing Eject Button LED's- $5
Extra LED's- $.50 Each
Controller Mods -
Reset Button- $5
Installing LED in dongle - $2.50
Making + Cutting Custom X- $7.50
LED Behind Hole on Controller- $2.50
*DEAL* Controller Customization - Making and Putting in Custom Controller Jewel + Lighting it with a LED + reset button - $12.50
Packages -
Package 1- Installing Chip, Installing HDD, LED Coustomization Deal, Changing Eject LED's- $50
Package 2 - Installing Chip, Installing HDD, LED Customization Deal, Changing Eject LED's, Installing HDD Activity Light, and Controller Customization- $75
We will talk about payment options via E-Mail or AIM
Paypal Accepted!
All Prices can be worked out!
If your intrested, make sure you contact me -
AIM - Getotet or Email - [email protected]
Make sure you check out the site if you are intrested, but are not located near me -
http://phear-modding.co.nr
(IMG:http://paypal.com/en_US/i/icon/verification_seal.gif)
Contact me by PM, Email or AIM ^^
This post has been edited by animex2 on Jul 16 2004, 09:03 AM
-
Bump
Note - There is difficulties with the webserver
This post has been edited by animex2 on May 3 2004, 10:54 AM
-
He did my xbox with an xecuter 2.2 lite. He did a very good job. I was very impressed.
-
Bump
-
Bump
-
Bump
-
Bump
-
Prices Lowered!
-
Bump!
-
Bump!
-
-----Now doing DVD-windows!!------
20$
Complete with:
--Cutting top xbox case
--Fitting plexi-glass
--Cutting DVD drive (will cut phillips, thomoson, and samsung =))
+10$
--Additional window and fitted plexi-glass
NOTE: I'm doing the DVD window, Not Animex2.
I will post pictures of my DVD window later.
This post has been edited by DarkDeity on May 9 2004, 09:02 PM
-
PICTURES!!!
DVD Drive Cut (I'm going to sand down the sticker and Repaint it soon)
(IMG:http://eddyinsurance.com/phear/dvdp.jpg)
Front of my Xbox (open/light)
(IMG:http://eddyinsurance.com/phear/front.jpg)
Front (closed/no light)
(IMG:http://eddyinsurance.com/phear/night-1.jpg)
Top of Case (2 windows) NOTE: I have to repaint the white b/c it is chipping and has sharpie on it.
(IMG:http://eddyinsurance.com/phear/top.jpg)
These are a few examples of what Phear Modding has to offer.
NOTE: If you would like the 2 windows like my case and the DVD drive cut it would cost $30.00 USD.
*Prices can be negotiated*
This post has been edited by DarkDeity on May 10 2004, 01:24 AM
-
bump ;)
-
thanks eddy
well, server seems to be pretty stable now, so it should be up whenever you go to it
-
this tuesday to next tuesday now doing 10$ modchip installs!!
hurry before this great deal slips away!