xboxscene.org forums

Shopping Forums => Xbox (original) Buy & Sell (original XBOX Related Items Only) => Topic started by: bombzhome on July 15, 2003, 06:24:00 PM

Title: Case Modding...
Post by: bombzhome on July 15, 2003, 06:24:00 PM
I can do a lot of case mods and CHEAP...

1. Spray Painting the Xbox:

1 color = $10              <--- Chrome Paint... Add $5
2 color = $15              <--- Chrome Paint... Add $5
1 color with CRYSTAL clear jewel = $15
2 color with CRYSTAL clear jewel OR jewel same color as 2nd color (vents of the case) = $20
An example of one that I recently painted:
Color Border Between the Silver and the Blue!

2. Jewel Mod:

1. CRYSTAL CLEAR JEWEL!: $5
2. Jewel ANY COLOR: $10
3. CRYSTAL Clear Jewel w/ me providing Cold Cathode $20

3. Hard drive Installation:

1. I provide 120GB with EvoX and apps installed = $110
2. I provide 60GB with EvoX and apps installed $80

4. Fan mod:

1. I provide LED Fan mod = $15
2. I provide Cathode Fan mod = $20

5. EEPROMS (off-topic, but i have some): $10

I am a reliable trader and seller (have positive feedback on eBay).... I also accept trades so just tell me what you wish to trade... I may have left something out, but I can do A LOT of case modding... my Xbox was recommended for being held in a showcase so therefore I have started doing this... Also I have a special utility that gets the Xbox Jewel CRYSTAL clear with NO SCRATCHES... I dont even use sandpaper!  wink.gif
Title: Case Modding...
Post by: wazzupbe1 on July 15, 2003, 05:38:00 PM
do you have a price where you buy the mod chip and install?
Also, the $100.00 for HDD, does that include the HDD?
Can you install a switch to enable online play?
What refs. do you have?
And do you have any pictures?

This post has been edited by wazzupbe1: Jul 16 2003, 12:40 AM
Title: Case Modding...
Post by: wtaag on July 15, 2003, 08:39:00 PM
Got any pics?  I'm willing to send you a case.
Title: Case Modding...
Post by: stlmike on July 15, 2003, 10:37:00 PM
yes, does that $100 include a new hd?????
Title: Case Modding...
Post by: MeNaCe911 on July 16, 2003, 12:16:00 AM
im sure it does...and do the prices include shipping and also hook us up wit some pics
Title: Case Modding...
Post by: whatzup137 on July 16, 2003, 01:19:00 AM
bombzhome,

Where are you located?
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 05:57:00 AM
hey.. i just woke up.. lol im getting my flash card for my camera today (HOPEFULLY) but i cannot pay for shipping cuz it will be too much... u PAY for shipping but to make it easier on urself... open ur xbox and just send me JUST THE CASE... yes i do buy the hard drive AND install for $110 not $100 my bad.. cuz 120GB hard drives cost like $100 themselves... also my prices MAY get lower if i can work out a deal with one of my friends into ordering bulk products off of him... im located in Maryland ...  biggrin.gif
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 05:16:00 AM
NOTICE THE PRICE CHANGE... ALSO YOU GUYS HAVE TO PAY EXTRA $15 for shipping your WHOLE XBOX and $7 for shipping JUST THE CASE!
Title: Case Modding...
Post by: ASheva10 on July 16, 2003, 07:28:00 AM
I am sorry bombz I hate to do this but, I got to tell all these people something.

I talked to bobz on aol for sometime, during that time he wanted me to install him matrix switches. and offered me so bogus trades for it, like a dead power supply of a stock fan.

He also wanted me to fix his fan install, he said that he installed a new exaust fan and it was kinda out of place, and he asked me to hot glue it to the case. MY responce was why not do it yourself, he told me that he was afraid that he will mess something up doing it. He also said that he fucked up one of the paint jobs which he was doing for his friend.

Well I don't know about you , but I wouldn't trust a person who wanted another guy to fix one of his case mods(exaust fan), or trust a guy who fucked up the paintjob.

This post has been edited by ASheva10: Jul 16 2003, 02:30 PM
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 09:09:00 AM
yo that was like a month ago.. ill show u the one that i just painted... i screwed up my friends.. but then i sanded it back off and i repainted it and it kinda looks like something TykSak woulda done... Asheva... why thread crap... i dont see the point.. if u want business start ur own thread... otherwise SHUT UP!  dry.gif
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 08:17:00 AM
Im sorry people... please ignore A Sheva 10, i have delt with him before hes just someone who is lost and doesnt know his whereabouts... please ignore his presence.. hes just mad because he cannot get business!

This post has been edited by bombzhome: Jul 16 2003, 03:19 PM
Title: Case Modding...
Post by: ASheva10 on July 16, 2003, 08:24:00 AM
QUOTE (bombzhome @ Jul 16 2003, 01:11 PM)
Im sorry people... please ignore A Sheva 10, i have delt with him before hes just someone who is lost and doesnt know his whereabouts... please ignore his presence.. hes just mad because he cannot get business!

I am not bad because I cann't get business, and tell me why are you hiding the truth.
For the record, you've never dealt with me.
You are the guy who got annoying by messaging me evryt fucking hour and asking that I bring my xbox along with me.

By the way, why not show us some pictures of your work?
If I do a good job I have pics to prove it.
But on the other hand I cann't figure out where are your pictures.

This post has been edited by ASheva10: Jul 16 2003, 03:26 PM
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 08:34:00 AM
i cant take pics yet... lemme get my cameras flash card.. then we will see.. and ASheva... why did u bring ur xbox... u coulda scammed me soo bad since u wouldnt even tell me ur address...ENOUGH WITH THE THREAD CRAPPING... Asheva i never asked u to buy anything from me.. u dont wanna buy anything... THEN GO AWAY!
Title: Case Modding...
Post by: ASheva10 on July 16, 2003, 08:41:00 AM
ok, I am gone I wasn't thread crapping I was bringing some info to the public.

one more thng before I leave is there a reason you messaged me every fucking hour on aol, asking dumb questions?
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 09:44:00 AM
no.. not really... see that just proves that im an active seller!  wink.gif
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 10:58:00 AM
calm down man.... and btw.. i thought u said u were "gone"..also i only have ONE pic on my crappy camera so thats all i have.. once my flash card comes in for my GOOD camera ill post those up! also this xbox was my FIRST one... and i did it for free for my friend... so if u think it looks crappy.. well then just remember.. when ur doing stuff for free.. u dont take ur time on it.. and the jewel looks weird in this picture i dunno why! also thats another reason why i didnt paint the controller ports in this pic.. cuz i did it for free! here ya go:

http://www.exclusive...net/boxpic1.jpg

btw goto the main page.. thats a vicious layout made by my brother!
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 11:07:00 AM
picture here oncee again:

http://www.exclusive...net/boxpic1.jpg
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 04:44:00 PM
*bump*.. whered everyone go! ohmy.gif
Title: Case Modding...
Post by: bombzhome on July 16, 2003, 07:03:00 PM
c'mon no1 saw the pics?
Title: Case Modding...
Post by: bombzhome on July 17, 2003, 09:05:00 AM
bump!
Title: Case Modding...
Post by: -={Nexus}=- on July 17, 2003, 10:05:00 AM
QUOTE (bombzhome @ Jul 16 2003, 07:58 PM)
and i did it for free for my friend... so if u think it looks crappy.. well then just remember.. when ur doing stuff for free.. u dont take ur time on it..

this attitude,
kinda deterred me from buying from you bob
Title: Case Modding...
Post by: bombzhome on July 17, 2003, 11:35:00 AM
huh... i can do quality paint jobs dude... c'mon now... look at my prices.. soo low.. and if screw up ur case... ur guaranteed a new one!
Title: Case Modding...
Post by: MeNaCe911 on July 17, 2003, 11:52:00 AM
some more pics would be nice...i mean that wasnt sheer quality...i like the whole free case in case of fuck up plan thing lol
Title: Case Modding...
Post by: bombzhome on July 17, 2003, 11:59:00 AM
umm i cant get any more unless u guys wish for ULTIMATE CRAPPY PICs... in which u can barely see the xbox with my brothers $25 digital camera... lol... ill try to post some up soon.. my friend took his xbox back home but i think i still may have some pics of the crappy camera taking it!
Title: Case Modding...
Post by: MeNaCe911 on July 17, 2003, 12:01:00 PM
try to get some closer pics...detail and stuff...and also a pic of a 2 color xbox...i might send ya my xbox case
Title: Case Modding...
Post by: bombzhome on July 17, 2003, 01:57:00 PM
ok.. i dont have any pics of a 2 color xbox case.. but if u send me urs... ill use urs as an example... also... If u provide the spray paint... ill charge less.!
Title: Case Modding...
Post by: bombzhome on July 17, 2003, 03:50:00 PM
bump....  blink.gif
Title: Case Modding...
Post by: bombzhome on July 18, 2003, 05:10:00 PM
*bump*
Title: Case Modding...
Post by: poiygon on July 18, 2003, 05:47:00 PM
bombzhome,

You may want to put a little more money and planning into your operation. Much of your replies are hurting more than helping. Here are some things you may want to do:

- Get a good digital camera for pics
- Buy a few plain XBox cases and take pics of your work on those cases
- Get all the angles when taking pics
- Make sure you can afford to make mistakes, because they will happen
- Don't ask for help from a competitor (or potential competitor)
Title: Case Modding...
Post by: bombzhome on July 18, 2003, 06:00:00 PM
I got my digital camera flash card... ill post pics up when i see the xbox again... as for now... MeNaCe is planning on giving me his xbox to case mod... it will all start from there...  wink.gif
Title: Case Modding...
Post by: NeO529 on July 18, 2003, 07:18:00 PM
I'll let you fix the lid I fucked up on and i'll even take before and after pics and post them here for everyone to see how you can fix mistakes and how good of a job you do if it is indeed good. Let me know... and no I'm not giving you money for it up front but I'll pay shipping going there and you pay coming back.
Title: Case Modding...
Post by: bombzhome on July 18, 2003, 07:28:00 PM
ok sure.. ill see what i can do!  wink.gif
Title: Case Modding...
Post by: bombzhome on July 19, 2003, 05:42:00 AM
*bump*
Title: Case Modding...
Post by: bombzhome on July 19, 2003, 11:09:00 AM
yup thanks for the business Alkane...
Title: Case Modding...
Post by: bombzhome on July 19, 2003, 05:50:00 PM
getting a couple customers...  biggrin.gif  hope to get more... rolleyes.gif
Title: Case Modding...
Post by: bombzhome on July 20, 2003, 07:24:00 AM
Updated the front page...   cool.gif
Title: Case Modding...
Post by: bombzhome on July 20, 2003, 02:35:00 PM
*bump*
Title: Case Modding...
Post by: bombzhome on July 21, 2003, 06:10:00 AM
hehehe.. look whos back.. *bump*
Title: Case Modding...
Post by: kenetik on July 21, 2003, 06:29:00 AM
Ok. bombzhome: How old are you? From your actions and posts you seem very immature. As for Asheva10, I appreciate him giving information to the public, he doesn't want any one to get screwed. I realize by posting this, your probably going to be immature again and 'blast' me for my opinion. I suggest that you dont because it will once again only show how immature you are. I am still waiting on a 'high quality' pic.

Please, dont dump again.

Title: Case Modding...
Post by: bombzhome on July 21, 2003, 06:34:00 AM
That xbox isnt at my house anymore so i cannot get any good pics... but im getting someones xbox soon and im gonna spray paint it and make you all feel wrong... If you guys dont trust me.. then dont.. I already said i have some refs to prove that im legit but it looks like being legit is not the issue here.. its the matter of whether i have the skill and potential or not... and obviously I do but you guys dont trust me... Well im getting someones xbox today (hopefully) and ill show u how its done..!  wink.gif
Title: Case Modding...
Post by: bombzhome on July 21, 2003, 06:48:00 AM
ok wtf... whats this have to do with anything... i do spray painting and stuff not this USB crap... i dont give for that piece of shite... ASheva10 PLEASE STOP THREAD CRAPPING... YOU SAID YOU WOULD LEAVE... YOUR JUST MAD BECAUSE YOU DONT GET ANY BUSINESS NOW YOUR TRYING TO GET ME TO NOT GET ANY BUSINESS!  grr.gif


just wait till u see the demo case that im gonna use... then ur gonna shove it up ur @$$ asheva...
Title: Case Modding...
Post by: kenetik on July 21, 2003, 07:20:00 AM
QUOTE (bombzhome @ Jul 21 2003, 03:48 PM)
ok wtf... whats this have to do with anything... i do spray painting and stuff not this USB crap... i dont give for that piece of shite... ASheva10 PLEASE STOP THREAD CRAPPING... YOU SAID YOU WOULD LEAVE... YOUR JUST MAD BECAUSE YOU DONT GET ANY BUSINESS NOW YOUR TRYING TO GET ME TO NOT GET ANY BUSINESS!  grr.gif


just wait till u see the demo case that im gonna use... then ur gonna shove it up ur @$$ asheva...

If you dont calm down and act more mature, I'm afraid you won't get any more "clients" even if your the best case modder out there.

A customer is a person to whom you try and sell a product from a company.
A client is a person to whom you personally sell a product to or give a service to.
Title: Case Modding...
Post by: bombzhome on July 21, 2003, 07:27:00 AM
umm ok... thx for that useless information that i may NEVER need in the near future... and ASheva10 u try to bring up the most bogus excuse for a piece of evidence... i mean WTF... im starting a case modding business and u bring up an adaptor that MY BROTHER made and took pictures of it with HIS CAMERA... i mean come on now.. whats next.... ur gonna show everyone what shoes i wear and somehow thats gonna be evidence?  dry.gif
Title: Case Modding...
Post by: kenetik on July 21, 2003, 07:31:00 AM
Yep I just know what kind of shoes you wear. You wear the ones that when you walk build up static electricity in your body so that when you touch anyone's xbox, BOOM, fried it.

14 year olds have absolutely no taste in shoes.
Title: Case Modding...
Post by: bombzhome on July 21, 2003, 07:34:00 AM
O...K u see the pics of the shoes in my avatar except mine are in the blue/black colorway... NOW GET BACK ON TOPIC.. i wear expensive shoes... ok... does that have to do with anything... now back to the case modding!
Title: Case Modding...
Post by: jebjeb on July 21, 2003, 07:39:00 AM
hey i am interested in a paint job/jewel/lights mod
find me on msn
[email protected]

and do you take trades
or just cash
Title: Case Modding...
Post by: bombzhome on July 21, 2003, 09:36:00 AM
THANK YOU ALKANE... as for u jebjeb.. umm yes but i take ANY kinda money.. paypal, cash, etc...
Title: Case Modding...
Post by: bombzhome on July 21, 2003, 05:58:00 PM
Updated the front page... with *NEW* chrome paint.. jeez that sh!t is expensive!  unsure.gif
Title: Case Modding...
Post by: bombzhome on July 22, 2003, 11:47:00 AM
well im about to do someones xbox and have some high quality pics up... it will show those who dont think i have the potential!  dry.gif
Title: Case Modding...
Post by: bombzhome on July 25, 2003, 06:03:00 AM
For those who didn't trust me... heres a crystal clear jewel that I just did yesterday...

http://www.exclusive.../clearjewel.jpg
Title: Case Modding...
Post by: bombzhome on July 25, 2003, 08:12:00 AM
And here is a pic of the Xbox that is currently in progress....

http://www.exclusive...mp/black_silver
Title: Case Modding...
Post by: imgodlike1 on July 25, 2003, 08:25:00 AM
it looks nice
Title: Case Modding...
Post by: bombzhome on July 25, 2003, 10:25:00 AM
QUOTE (Gomorrah @ Jul 25 2003, 01:05 PM)
Can you please give me an average time that it takes you to do one of these?  And perhaps a link on where we can see what colors we have.

And for those of you who keep messing with him, get a life.  If you think you can do a better job then do it otherwise keep your mouth shut.

Thanks both of you.... Umm just that coat took me like no more than 20 min to do including masking off the vents... etc... ill get u guys more pics when i FULLY complete it.. btw... when u tell me what colors u want.. i buy them and then i do the job... right now i have blue, silver, red... Thanks again for the feedback! wink.gif
Title: Case Modding...
Post by: bombzhome on July 25, 2003, 04:22:00 PM
umm *BUMP*  biggrin.gif
Title: Case Modding...
Post by: bombzhome on July 25, 2003, 04:29:00 PM
Ok... its done.. pics didnt come out too well.. But this will just make some of you feel stupid... for not believing me!

Top X Part

Further Away


btw i plan on carving out the middle and putting blue cathode under it... i already ordered everything... and ill get pics of that and the FULLY finished product when the cathode finally comes! This is an Xbox that i painted for a guy!
Title: Case Modding...
Post by: bombzhome on July 26, 2003, 05:42:00 AM
Kool thanks alot for the feedback, by the way I am going to add some Cathode to the jewel!  biggrin.gif
Title: Case Modding...
Post by: bombzhome on July 27, 2003, 10:42:00 AM
*bumpzorz*  sad.gif
Title: Case Modding...
Post by: bombzhome on July 27, 2003, 10:56:00 AM
Hey guys.. i uploaded ANOTHER picture of the Xbox thats IN PROGRESS just to show some of you guys my work... well enjoy!  wink.gif

Color Border Between the Silver and the Blue!
Title: Case Modding...
Post by: bombzhome on July 27, 2003, 12:58:00 PM
thanks...



FOR THE FREE BUMP..  laugh.gif
Title: Case Modding...
Post by: bombzhome on July 27, 2003, 01:05:00 PM
lol... wtf!  grr.gif
Title: Case Modding...
Post by: bombzhome on July 27, 2003, 01:08:00 PM
Well... update the first post... with some pics of a jewel and Xbox that I have recently done...
Title: Case Modding...
Post by: mikegrif on July 27, 2003, 06:45:00 PM
where do you live?
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 06:05:00 AM
No, I do not sell original CLEAR jewels... I make them CLEAR for you when you send me your Xbox... Another thing... I am located in Maryland for those who wanted to know...  wink.gif
Title: Case Modding...
Post by: rocketman121 on July 28, 2003, 07:13:00 AM
QUOTE (bombzhome @ Jul 15 2003, 09:24 PM)
2. Jewel Mod:

1. CRYSTAL CLEAR JEWEL!: $5
2. Jewel ANY COLOR: $10
3. CRYSTAL Clear Jewel w/ me providing Cold Cathode $20

Will you just sell me the cold cathode.  If so do you have a blue one?

And heres my buy/trade thread, see if you want anything.
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 08:40:00 AM
umm I get the cathodes from a friend... perzbenz.. he sells them on this forum... ask him..  wink.gif
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 09:02:00 AM
Well... im getting more and MORE pics... heres the latest ones....

Back of the Xbox

Right Side Vents

Left Side Vents

Enjoy!  wink.gif
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 11:20:00 AM
wow... u posted in both of my threads...

obsessed sleep.gif

thats VERY sad ASheva... that just shows how LOW-Class u are... u stingy lil bamma  dry.gif
Title: Case Modding...
Post by: NeO529 on July 28, 2003, 11:21:00 AM
what does? showing what was wrong with the painting job?
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 11:21:00 AM
btw asheva... can we please see something u have painted... if it looks even REMOTELY close to being better than that...  dry.gif another thing... u are showing me VERY MINOR mistakes that i can fix in about 2 secs when its finally ready to be given back to the original owner... come on now... what about the color border... i ONLY heard silence on that asheva
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 11:23:00 AM
Ya.. i would REALLY like to know how much he did it for... hey if i was getting paid as much as he does.. this thing would have like a refridgerator and a built in LCD screen  laugh.gif  but then look at MY prices!
Title: Case Modding...
Post by: majik655 on July 28, 2003, 11:31:00 AM
QUOTE (bombzhome @ Jul 28 2003, 12:23 PM)
Ya.. i would REALLY like to know how much he did it for... hey if i was getting paid as much as he does.. this thing would have like a refridgerator and a built in LCD screen  laugh.gif  but then look at MY prices!

yeah bomb..  
you came to my thread also and said you like your service better.

I tell you what .. I stuck up for you in my thread .. but now I see why it is 20$.

compared to this .. yours is definently worth 20$ and makes mine look way more worth 100$ ...lol
Links to pics.

user posted image
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 11:37:00 AM
lol u actually think someone wants a paintjob for $100... WOW  laugh.gif
Title: Case Modding...
Post by: majik655 on July 28, 2003, 11:55:00 AM
QUOTE (bombzhome @ Jul 28 2003, 12:37 PM)
lol u actually think someone wants a paintjob for $100... WOW  laugh.gif

hey ... I BET YOU.. no one wants one like the pics you last showed for even 1$.

sure maybe no one wants it for 100$  .. however I bet you anything if I drop it to 50$  you will be gone.

Plus Mine would NEVER EVER come to someone looking like yours.. even if it was a 20$ job.   At least take pride in your work no matter how cheap it is.. I would throw that job back at you and demand a refund if that came to me.

You really painted the connector??  seriously man.
And you could at least use a paint booth so your cat hair doesn't get in the way of your work.
Title: Case Modding...
Post by: majik655 on July 28, 2003, 12:06:00 PM
QUOTE (ASheva10 @ Jul 28 2003, 01:03 PM)
yo, majik655 that's a freaking amazing paintjob, I don't like the style, but I like the detail, time and effort you put into it.

Thanks ASheva10

I know some may not like this style..
pm me with what YOU would think is cool  (so I have some ideas thats all)
ANYTHING!
Title: Case Modding...
Post by: cribby08 on July 28, 2003, 12:11:00 PM
ASheva10 you are right on.


BTW please done IM bombzhome on AIM telling me you have potential.  

Im not trying to dog you or anything, you are obviously a n00b and has not have that much experiance.  Everyone has got to start somewhere.  But it was you that compared your work to one of the greatest (if not the greatest) xbox painter and case modder, you are going to get some reaction.  It seems to me like you want that kind of reaction.  You seem to just want to start a flame war all the time.

Just be honest and dont make outragous claims and you will be ok.

Again please done IM me on AIM and tell me about your potenital and now you are going to prove me and everyone wrong.  

Thanks
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 01:48:00 PM
All you guys are fools... WAIT TILL I FINISH THE JOB THEN TELL ME HOW SUCKY IT IS... DO U GUYS FORGET TO READ THIS EVERYTIME!  dry.gif
Title: Case Modding...
Post by: NeO529 on July 28, 2003, 01:50:00 PM
okay bombzhome, I know we are "cool" and all but honestly, you keep telling people this but everytime your work is subpar... and btw FIXING a paint job is a tough trick to pull unless you plan on sanding it down even and putting another full coat on which can still be tough. Good luck in any case (no pun intended  wink.gif )
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 01:52:00 PM
No, im just gonna use Paint remover on the areas that paint got spread... no biggie.. it works fine...  smile.gif
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 04:25:00 PM
Lol.. thanks Alkane..  wink.gif
Title: Case Modding...
Post by: perzbenz on July 28, 2003, 04:28:00 PM
did someone ask for some cathodes?
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 04:29:00 PM
lol... yea perzbenz.. u can leave some feedback too if ya want...  laugh.gif
Title: Case Modding...
Post by: swiss on July 28, 2003, 05:21:00 PM
im a noob and i just read all the post and i have a few coments. to the guy selling the box for a 100, its off da chain but not for a bill. to asheva10 keep spreading the truth, when the truth is brought out hate will always follow (bombzhome). and to bombzhome im a noob, i just painted my box this weekend, one color just silver but it looks about the same as yours. and before you start saying let me see yours and when its done youll see, your the one on everyones elses thread talking shit, you have to back it up, and as of right now your not. the box that you painted looks like shit, and  how in the fuck are you going to paint over the video outlet. just my 2 cents you can say what you want but thats the truth. holla playas
Title: Case Modding...
Post by: majik655 on July 28, 2003, 05:36:00 PM
QUOTE (swiss @ Jul 28 2003, 06:21 PM)
im a noob and i just read all the post and i have a few coments. to the guy selling the box for a 100, its off da chain but not for a bill. to asheva10 keep spreading the truth, when the truth is brought out hate will always follow (bombzhome). and to bombzhome im a noob, i just painted my box this weekend, one color just silver but it looks about the same as yours. and before you start saying let me see yours and when its done youll see, your the one on everyones elses thread talking shit, you have to back it up, and as of right now your not. the box that you painted looks like shit, and  how in the fuck are you going to paint over the video outlet. just my 2 cents you can say what you want but thats the truth. holla playas

nicely put swiss.
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 06:39:00 PM
QUOTE (swiss @ Jul 28 2003, 09:21 PM)
im a noob and i just read all the post and i have a few coments. to the guy selling the box for a 100, its off da chain but not for a bill. to asheva10 keep spreading the truth, when the truth is brought out hate will always follow (bombzhome). and to bombzhome im a noob, i just painted my box this weekend, one color just silver but it looks about the same as yours. and before you start saying let me see yours and when its done youll see, your the one on everyones elses thread talking shit, you have to back it up, and as of right now your not. the box that you painted looks like shit, and  how in the fuck are you going to paint over the video outlet. just my 2 cents you can say what you want but thats the truth. holla playas

umm why not paint over the video output.. it still works.. do some more research then flame me u n00b. I covered the INSIDE of it so that dont get painted...
Title: Case Modding...
Post by: swiss on July 28, 2003, 06:46:00 PM
well im not really going to agure but why not just take out the motherboard makes more sense, if you ask me and probably everyone else on here this is the way to do it. and you cant really criticize me for being a noob, atleast i relize i still have alot to learn ohmy.gif . holla,  wink.gif
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 06:48:00 PM
WTF... get outta here FireItUp.. dont call me a n00b when ur asking to buy a jewel.. obviously 'effed ur own.. i think this thread should be locked... and tossed to the garbage bin.. thank you soo much asheva... i bet if i had gotten the cheapmod installed by u u wouldnt have said ANYTHING... but u have to be a stingy bamma and be greedy and just start a flame war JUST cuz i didnt want ur service...  dry.gif
Title: Case Modding...
Post by: FIREitUP on July 28, 2003, 06:54:00 PM
actually, im just lazy, i dont want to waste my time sanding smile.gif anyways its fun stalking your every post BITCH and i hope whoever's xbox that is gets his/her money back.  cuz it sucks balls!
Title: Case Modding...
Post by: bombzhome on July 28, 2003, 06:56:00 PM
Lets see what you can do.. all you guys wanna talk trash... Lets see your paintjob... and WHY do you people IGNORE THE FACT THAT ITS NOT COMPLETE... I havent received the money... I still have like 4 days to go cuz im waiting on the cathode... so lets wait till EVERYTHING is done... then talk.. until now... leave this thread IMMEDIATELY!  mad.gif
Title: Case Modding...
Post by: ASheva10 on July 29, 2003, 04:49:00 AM
TEll me why do you want this thread locked?

1. you started it
2. you asked for comments
3. you got the truth
4 now you are trying to get this locked to hide the truth.
tell me, if it's not done, why the hell would you stick the outside switches for the x2?

now if you say one screw is not coming off, how come you also painted the psu connector.

and you have to stop calling people newbs just because they joined after you, right now these guy's know a lot more about xboxes than you.
Title: Case Modding...
Post by: NeO529 on July 29, 2003, 04:51:00 AM
(from his other thread)
QUOTE
... i didnt take out the mobo cuz his DVD Drive's screw thread was 'effed and i couldnt get the screw out.. the screwdriver just kept slipping away... i took EVERYTHING else off...

what screw wouldnt come off? Cant you take the dvd tray out once you get the lid off?
Title: Case Modding...
Post by: bombzhome on July 29, 2003, 04:55:00 AM
no... the screws thread wasnt coming off... and i want it closed because of the flame war going on and I have noticed that a lot of people do these case mods themselves... another thing asheva.. i put that thing out there to take THESE pics... its comes off easily... and plus i stuffed EVERYTHING in the back... since i couldnt get the dvd drive out to get the mobo drive out so i stuffed the psu andd the av adaptor thing and i masked off the ethernet port.... 'nuff said  dry.gif
Title: Case Modding...
Post by: NeO529 on July 29, 2003, 05:02:00 AM
what screw? I am still confused as to what screw was holding the dvd drive in.
Title: Case Modding...
Post by: bombzhome on July 29, 2003, 05:13:00 AM
the one on the right of the dvd drive... the LITTLE torx 10 screw... DONT u know that theres TWO screws that hold the DVD Drive in... well u may not kno cuz u dont have a DVD Drive..  laugh.gif
Title: Case Modding...
Post by: NeO529 on July 29, 2003, 05:15:00 AM
so what kept you from taking the TRAY out WITH the dvd drive? I know there are two screws that hold the drive in the tray.
Title: Case Modding...
Post by: bombzhome on July 29, 2003, 05:37:00 AM
EXACTLY and one wouldnt come out... the threads were all jacked up...  dry.gif
Title: Case Modding...
Post by: NeO529 on July 29, 2003, 05:51:00 AM
BUT YOU CAN REMOVE THE ENTIRE TRAY WITH THE DVD SCREWED IN THE TRAY WITHOUT TAKING THOSE SCREWS OUT. You are just making up excuses.
Title: Case Modding...
Post by: creativedirt on July 29, 2003, 08:01:00 AM
QUOTE
since i couldnt get the dvd drive out to get the mobo drive out ]


hehe, i feel sorry for whoever sent their xbox to him
Title: Case Modding...
Post by: redman8787 on July 29, 2003, 08:29:00 AM
wow..i have those same two colors and it look 50 times better that was a pretty bad paint jon that ahseva10 pointed out.  A lot of errors and blotches, i wouldn't do business with him unless you're looking for a 1/2 assed job.
Title: Case Modding...
Post by: NeO529 on July 29, 2003, 08:29:00 AM
agreed, want a full assed job? check my sig  tongue.gif
Title: Case Modding...
Post by: redman8787 on July 29, 2003, 08:30:00 AM
lol the funny thing is that i got mine done by matrixman
Title: Case Modding...
Post by: redman8787 on July 29, 2003, 08:35:00 AM
double fuck
Title: Case Modding...
Post by: redman8787 on July 29, 2003, 08:35:00 AM
double post
Title: Case Modding...
Post by: bombzhome on July 29, 2003, 09:36:00 AM
You got the guts to show us urs redman... and NeO.. STFU... i told u how to fix the paintjob on ur xbox... dont be a lil azz now 'effed ur xbox up and it looks like some crap now!  grr.gif
Title: Case Modding...
Post by: XB0X_Mod on July 29, 2003, 09:44:00 AM
Nothing more to say here CLOSED

Thread crapping unbelievable AGAIN BY THE SAME PEOPLE!
Title: Case Modding...
Post by: Xeero on July 29, 2003, 10:35:00 AM
Allow me to define thread-crapping:

Joe: I do paint jobs for $15.00.
Jay: Joe sucks! I do them for $10.00! PM me!

-----------------------------------------------------------------

Allow me to define the consequences of BAD BUSINESS:

Joe: I do paint jobs for $15.00.
Jim: Hi, I had a bad experience with Joe, and rather than remedy the situation, he told me to leave him alone.  Just letting any potential buyers know that there is potential risk involved.
John: Thanks, Jim.  Sorry, Joe, I'll buy from someone else.

------------------------------------------------------------------

In case I'm not clear, if you have had a bad experience with a seller and have reasonably justifiable reasons for your stance, you are allowed to voice this.