Post by: Icoman on November 13, 2007, 01:48:00 PM
Im new to Xlink, and this my first time to set it up. I think that Ive done everything correct, but Im not sure. I have forwarded my IP to the port, 30000. You can se some picture underneath this text. I hope you can help me, because I really want to try this service out.
(IMG:http://img89.imageshack.us/img89/9950/78290487ei9.jpg)
Port Forwarded
(IMG:http://img131.imageshack.us/img131/3350/81052221rx5.jpg)
Status
(IMG:http://img113.imageshack.us/img113/9951/82564270fl6.jpg)
Internet Protocol
(IMG:http://img102.imageshack.us/img102/9110/97963894yo7.jpg)
Xlink Kai
What did I do wrong?
Thanks in advance
Post by: c-2 on November 13, 2007, 02:44:00 PM
Post by: Icoman on November 13, 2007, 03:24:00 PM
QUOTE(c-2 @ Nov 13 2007, 11:20 PM) 
you have to forward to your PC .. change the IP to 192.168.2.4 on your router ..
It doesn't help
Post by: c-2 on November 13, 2007, 02:53:00 PM
Post by: Icoman on November 13, 2007, 03:32:00 PM
QUOTE(c-2 @ Nov 13 2007, 11:29 PM)
you changed the forward ? .. do you have another firewall running ?
Well I have my antivirus, 2 sec and I will try to disable it.
It works for 20 sec. and then it says the message again, that it was unreachable.
Post by: c-2 on November 13, 2007, 02:59:00 PM
in the kai config try enabling PAT ..
Post by: Icoman on November 14, 2007, 06:07:00 AM
My antivirus is diasbled
I've also removed the firewall from the lan connection.
When I start the the Xlink Kai it shows that it is connected to the IP, that my Xbox is found and that it is connected to Xlink server. After 20 sec. it shows the message "Unreachable"
I think I have done everything correct, but it sounds like it doesnt work. I hope you still can help me.
Post by: c-2 on November 14, 2007, 09:29:00 AM
are you sure you have no firewall running ? the XP one ? .. what is your network setup ? .. if your using DSL than your 'modem' is a router as well and has a firewall ..
Post by: Icoman on February 03, 2020, 11:47:00 AM
QUOTE(c-2 @ Nov 14 2007, 06:05 PM)
it might help if you really know your IP .. the picture right above in your first post shows your PC IP as 192.168.2.4 .. you forwarded to 192.168.2.1 .. now your telling me that your PC IP is 192.168.2.3 ?? .. might want to get that sorted before carrying on .. you need to forward to the PC running kai ..
are you sure you have no firewall running ? the XP one ? .. what is your network setup ? .. if your using DSL than your 'modem' is a router as well and has a firewall ..
I am really sorry for your confusion, but it is true, my IP have change since yesterday from 4 to 3, why I dont know. My setup is:
(IMG:http://img221.imageshack.us/img221/1936/systemiy6.jpg)
I have disabled every single firewall, it means that I have disable XP and my antivirus. But I dont know if my router has a firewall?
Post by: c-2 on November 14, 2007, 12:53:00 PM
make sure your forwarded to whatever the PC's current IP is ..
This post has been edited by c-2: Nov 14 2007, 08:53 PM
Post by: Icoman on November 15, 2007, 07:00:00 AM
QUOTE(c-2 @ Nov 14 2007, 09:29 PM)
if your using DSL than your 'modem' is a router as well and has a firewall .. what kind of modem is it ?
make sure your forwarded to whatever the PC's current IP is ..
I have now forwarded on my modem and router. I have desabled every firewall, it means XP's and my antivirus'. WHen I load the Xlink Kai, it was open in about 1 minute without problems, but right after the messeage shows again.
I have try to use XBconnect, and it works smooth I only have to disable my firewall and everything was working. Why is it so hard to get Xlink to work, I mean...
I hope still you can help me, because I want to use Xlink Kai and not XBconnect.
Post by: c-2 on November 15, 2007, 07:06:00 AM
have you tried enabling PAT in the kai config and putting the kai port at 0 ..
Post by: Icoman on November 15, 2007, 10:30:00 AM
QUOTE(c-2 @ Nov 15 2007, 03:42 PM)
on your modem you have to forward to the router , i suggest using DMZ to the IP of the router ..
have you tried enabling PAT in the kai config and putting the kai port at 0 ..
I've now tried with port 0 and 30000. I have forwarded to my router and open the ports 30000 in my modem. The IP I have put in is the IP that have been showed on the homescreen in the router's configuration - 192.168.2.1....
It seems that it doesnt work.
I think that it is comes to an end...I know you have helped me alot c-2 but I think that I newer can play on Xlink Kai.
Post by: c-2 on November 15, 2007, 01:26:00 PM
did you try PAT ? ..
Post by: Icoman on November 16, 2007, 06:57:00 AM
QUOTE(c-2 @ Nov 15 2007, 10:02 PM) 
what IP on your modem did you forward to ? ..
did you try PAT ? ..
Yeah I enable PAT in the Kai configuration.
My configuration of the modem is:
Post by: hickster on November 16, 2007, 07:22:00 AM
You need to enter the IP address of your PC that is running KAI. Sorry if you've alredy tried this, just trying to help.
Good Luck!!
This post has been edited by hickster: Nov 16 2007, 03:26 PM
Post by: Icoman on November 16, 2007, 08:17:00 AM
QUOTE(hickster @ Nov 16 2007, 03:58 PM) 
Hi, just checking in.... is your IP in port forwarding still 192.168.2.1, if so that is incorrect.
You need to enter the IP address of your PC that is running KAI. Sorry if you've alredy tried this, just trying to help.
Good Luck!!
No it is not. But thanks for trying helping me.
My ip on my router is 192.168.2.3
and on my modem is it 192.168.2.1
Post by: c-2 on November 16, 2007, 01:58:00 PM
Post by: Icoman on November 17, 2007, 03:01:00 AM
My router has port forwarded to IP 192.168.2.3 with port 30000
Post by: c-2 on November 17, 2007, 10:26:00 AM
"My ip on my router is 192.168.2.3"
you have to forward to your PC not back to your router , that will never work ..
change that on your router to the IP of your PC ..
Post by: Icoman on November 18, 2007, 03:52:00 AM
QUOTE(c-2 @ Nov 17 2007, 07:02 PM)
so thats wrong than .. you stated above ..
"My ip on my router is 192.168.2.3"
you have to forward to your PC not back to your router , that will never work ..
change that on your router to the IP of your PC ..
No it's my mistake...I just write quick...
My modem has port forwarded to the IP 192.168.2.1 with port 30000
My router has port forwarded to IP 192.168.2.3 with port 30000
And my static ip is 192.168.2.3.
So...
My IP on my router is 192.168.2.1
My IP on my modem is 10.0.0.2
This post has been edited by Icoman: Nov 18 2007, 11:55 AM
Post by: Icoman on November 18, 2007, 05:09:00 AM
First of all I have made a static IP
1. Picture from the CMD (ipconfig /all)
(IMG:http://img530.imageshack.us/img530/3235/cmdpu1.jpg)
2. Picture from the LAN configuration
(IMG:http://img527.imageshack.us/img527/1649/lanah1.jpg)
3. Picture from my router, that shows its IP
(IMG:http://img527.imageshack.us/img527/4799/router1xw0.jpg)
4. Picture from my modem, that shows that I have forwarded all ports to the routers IP (192.168.2.1)
(IMG:http://img140.imageshack.us/img140/1232/modemuv3.jpg)
5. Picture from my router, it shows that I have forwarded to Xlink Kai (Port 30000, UDP)
(IMG:http://img257.imageshack.us/img257/4620/router2jw1.jpg)
6. Picture from the Xlink Kai Configuration
(IMG:http://img140.imageshack.us/img140/2476/xlink1dn4.jpg)
7. Picture that shows the error
(IMG:http://img527.imageshack.us/img527/22/xlink2ic7.jpg)
I have disabled every firewall I have. It means that I have disabled the firewall in Windows XP and my firewall on Kaspersky Internet Security.
I hope that this reply have set some points in place.
Post by: c-2 on November 19, 2007, 07:13:00 AM
Post by: Icoman on November 19, 2007, 07:46:00 AM
QUOTE(c-2 @ Nov 19 2007, 03:49 PM)
try with PAT on and off .. also try and set DMZ on your router to your PC as a test .. it looks like it should work ..
It didn't help to set DMZ on 192.168.2.3 with PAT on and off and it didn't help either with DMZ on 192.168.2.1 with PAT on and off.
I mean, is it because I have the world's strongest firewall or do I need something to regulate.
This post has been edited by Icoman: Nov 19 2007, 03:46 PM
Post by: c-2 on November 19, 2007, 08:07:00 AM
try plugging the modem directly into the computer and see if it works ..
Post by: Icoman on November 19, 2007, 08:58:00 AM
QUOTE(c-2 @ Nov 19 2007, 04:43 PM)
well something is blocking kai .. do you have any other software firewalls besides the XP one ? ..
try plugging the modem directly into the computer and see if it works ..
Well I have Kaspersky Antivirus, and when I pause the protection the same things happen. I can't try to plug my computer directly to my modem as my cable isn't long enough... (IMG:style_emoticons/default/sad.gif)
Post by: Icoman on November 20, 2007, 08:13:00 AM
QUOTE(Icoman @ Nov 19 2007, 05:34 PM)
Well I have Kaspersky Antivirus, and when I pause the protection the same things happen. I can't try to plug my computer directly to my modem as my cable isn't long enough...
I gor this:
Error: I could not see your service on 212.242.208.37 on port (30000)
Reason: Connection timed out.
I just use http://canyouseeme.org/ at it seems that something a blocking Xlink Kai.
Post by: c-2 on November 20, 2007, 09:19:00 AM
http://www.voipuser....ard_tester.html
Post by: Icoman on November 20, 2007, 09:29:00 AM
QUOTE(c-2 @ Nov 20 2007, 05:55 PM)
i'm guessing that website only checks TCP ports tho .. i get the same error and i guarantee that my port is open .. try this app i just found ..
http://www.voipuser.org/port_forward_tester.html
It failed on port 30000 (IMG:style_emoticons/default/sad.gif)
Post by: Icoman on November 21, 2007, 02:12:00 PM
Again Ill just thank everybody and Im grateful that some guys as you a spending time on helping people, just keep going that!
Best regards, Icoman.
Post by: c-2 on November 22, 2007, 08:46:00 PM
try plugging the modem into just the LAN ports on the router so the DSL modem is the only router , than change the forward .. oh and you should turn off DHCP on the router if you try that ..
This post has been edited by c-2: Nov 23 2007, 04:47 AM
Post by: Icoman on November 23, 2007, 07:45:00 AM
QUOTE(c-2 @ Nov 23 2007, 05:22 AM)
ya i dunno what to tell ya man , that little port forward testing app works , i've tried it on port forwards on 6 different networks ..
Yeah I'm not saying that the app didn't work, I just said that the result of the app was that it failed on port 30000
QUOTE(c-2 @ Nov 23 2007, 05:22 AM)
try plugging the modem into just the LAN ports on the router so the DSL modem is the only router , than change the forward .. oh and you should turn off DHCP on the router if you try that ..
I tried that, but when I do that I can't connect to the internet. Yesterday I also try to put the computer directly to to modem, and Xlink didn't work.
I have also tried to run Xlink Kai on a computer in our house that didn't have any firewalls or something like that, and Xlink didn't work either there.
Post by: c-2 on November 23, 2007, 09:21:00 AM
QUOTE
I tried that, but when I do that I can't connect to the internet. Yesterday I also try to put the computer directly to to modem, and Xlink didn't work.
you can't connect to the internet because if you do this you have to change the IP on your computer to match the modem which above you stated is 10.0.0.2 .. so the computer / xbox would have to be in the same range , ie .. 10.0.0.3 and 10.0.0.4 or whatever ..
basically its a test to eliminate one of the 2 routers as thats where your problem lies , its not the firewall on your computer ..
This post has been edited by c-2: Nov 23 2007, 05:22 PM
Post by: Icoman on November 24, 2007, 04:16:00 AM
QUOTE(c-2 @ Nov 23 2007, 05:57 PM)
you can't connect to the internet because if you do this you have to change the IP on your computer to match the modem which above you stated is 10.0.0.2 .. so the computer / xbox would have to be in the same range , ie .. 10.0.0.3 and 10.0.0.4 or whatever ..
basically its a test to eliminate one of the 2 routers as thats where your problem lies , its not the firewall on your computer ..
So what do you think the problem is my modem/router or my Belkin Router? And what can I do about it?
Post by: c-2 on November 24, 2007, 09:35:00 AM
Post by: Icoman on November 25, 2007, 09:04:00 AM
QUOTE(c-2 @ Nov 24 2007, 06:11 PM)
ya the problem is that you have 2 routers .. try what i said .. plug the modem into the LAN port on the router so the router only acts as a switch than change the PC IP to the range of the modem .. on the modem change the forward to point to the new PC IP ..
As I can see it have made alot of problems for my other computers. I triede what you said, but it still says the same thing.
Post by: c-2 on November 25, 2007, 10:04:00 AM
the other computers would need to have their IP's changed as well ..