Post by: wweboy on December 29, 2003, 10:02:00 PM
Can anyone help me? Am i banned?
EDIT: Since I am trying to run an old version of xbl, if i buy the Live starter kit 3 and solve the updating problem?
Post by: Fuzzy on December 30, 2003, 06:58:00 AM
| QUOTE (wweboy @ Dec 30 2003, 03:02 AM) |
| I am having the same problem as the guy two posts above me. When i pick xbox live it doesnt give me a chance to get my xyz codes, it tries to update then says "cannot connect due to technical difficulties, try again later." If i unplug my network cable i get the codes W:0000-0000 X:8000-0011 Y:0000-0000 Z:0000-0000 When I input a wrong IP address I get W:0000-000B X:8001-0405 Y:0000-0000 Z:0000-0000 When I input a wrong DNS i get W:0000-000B X:0000-F009 Y:008C-0060 Z:0000-274C Again if i set everything right, it connects and wants to download an update which fails, so i cannot get my xyz codes Can anyone help me? Am i banned? EDIT: Since I am trying to run an old version of xbl, if i buy the Live starter kit 3 and solve the updating problem? |
EDIT: NM That first part i missread
What game are you using? Have you tried multiple games?
Post by: spinaroonisucka on December 30, 2003, 08:56:00 AM
| QUOTE (Fuzzy @ Dec 30 2003, 04:58 PM) | ||
EDIT: NM That first part i missread What game are you using? Have you tried multiple games? |
Yeah, I wasnt using any games. I just picked Live from the dashboard and it didnt work
(I was using wweboy's account in my previous posts)
OK I solved my problem and here are my new xyz codes. (with all network connections set right)
W: 0000-0015
X: 0000-F001
Y: 00A8-4860
Z: 0000-0000
Post by: undead on December 05, 2002, 03:39:00 PM
its actaully the first 48 bytes
the first 16 bytes is only a checksum of the next 32 bytes that containts the region, confounder and hdd key (all rc4 encrypted of course)
so strictly speaking the only way to change the first 16 bytes is to change anyone of the following 32 bytes and recalculate the first 16 byte checksum
Post by: Fuzzy on December 05, 2002, 07:58:00 PM
X:0000-f001 or f021 or etc. f0something
Y:00A8-4860 or 4820 or any other 4 (if this starts with a 6 ex 00A8-6860 your banned, no questions, dont bother)
Z:8015(still not sure completely of meaning)-1917,190D(which is pretty bad),190C(which is pretty bad) and im goign to look into 1919.
Thanks again for all your help. ill keep working. (special thanks to undead because im oblivious to all the indepth stuff and he translates for me
)
Post by: Fuzzy on December 05, 2002, 08:17:00 PM
Post by: Xbox-Savage on January 04, 2004, 01:58:00 AM
lets see if this changes , cause i think i will be banned , i runned Music Mixer and it started to download from Live automatically. but i turned it off , lets see if im lucky. and those codes doesnt change.Post by: Fuzzy on January 04, 2004, 12:01:00 PM
Post by: Fuzzy on December 06, 2002, 08:56:00 PM
time to get the peoples help again, people (
) i need your NONWORKING codes (i didnt say banned i mean for example cant find ip cant find dns etc.) and tell me what you did. I especially need people who have a non compatible internet and what the numbers are. Any codes at all will be appreciated (and remember to be as detailed as possible with what you tell me. Your ip settings, your router, your internet service, your connectivity, alot of lag, in what games, Everything you can tell me)
Post by: switzch on December 06, 2002, 10:27:00 PM
you should post a little tuturial on how to get this XYZ info. i would love to help. Unfortunitly, i am a noob when it comes to this, and have no clue.
Post by: Fuzzy on December 06, 2002, 10:32:00 PM
ATTENTION, THIS TUTORIAL ASSUMES YOU HAVE ALREADY FULLY INSTALLED XBOX LIVE!
1.Turn off your modchip and go to the Xbox Dashboard.
2.Click on the Xbox Live Tab.
3.Go to Network Connections.
4.Wait for the Green Lights (or red X'es depending on your setup) to load.
5.Once they load highlight the help button.
6.Over the help button press the Y button.
7.An X code a Y code and a Z code will come up along with more packet data including upload and download speed.
8.Take note of these Numbers.
9.Post results in Xyz Code, Uncoded on the Xbox-Scene forums in the Xbox Live section
-Fuzzy
Post by: SlaYer on December 06, 2002, 11:12:00 PM
My setup specs are in my sig. Working fine in both Mod and Non Mod ( EJECT power-Up) while Xbox Live Beta was on. But since the 15th of Nov I have been unable to get on.
Called MS and after several days I got the question: "do you have a mod chip?" I said, "what's that?" :-) LOL
It seems that MS intentionately allowed people with moded boxes access to LIVE beta to record their info and made sure none or us that got on during that period with the mods active will be allowed back in, mod detected or no mod detected.
For reference here's my info:
1.00.4920.01
X: 0000 - 000D
Y: 00A8 - 6800
Z: 8015 - 190D
All the rest of info has "0" in it indicating no data going back and forth.
Both IP and DNS are in manual mode!
Now comes the big questions for the experts:
What do we need to change, and how, to get back on with the mod chip off?
Post by: fullhack on December 06, 2002, 11:33:00 PM
Auto DNS Manual IP
x: 0001-8005
y: 00a8-6800
z: 8015-190d
Auto DNS Auto IP
x: 0000-f001
y: 00a8-6860
z: 8015-190d
Auto IP Manual DNS
x: 0000-f009
y: 00a8-6860
z: 8015-190d
Manual IP Manual DNS
x: 0000-000d
y: 00a8-6800
z: 8015-190d
well thats about all I've checked so far. I also would like to add that i can "temporarily" connect to live if i set the date prior to november. When i set the date to... lets say october 6th 2002, and try to access the live menu from the xbox main screen i get a connected message. Normally i get a "unable to connect" message or something. When i try to press the connect button at the live menu, it performs the tests as usual but reverts the date back to the current one, and says the usual "xbox live not found". I don't know if this info is useful or not.
-fullhack
Post by: ojrman on December 06, 2002, 11:38:00 PM
great findings by the way
Post by: fullhack on December 06, 2002, 11:47:00 PM
-fullhack
Post by: DaCxKasD on December 07, 2002, 12:20:00 AM
X:0000-f001
Y:008c-0060
Z:0000-274c
everything normal (I dont have a modded xbox)
X:0000-f001
Y:00a8-4860
Z:8015-1917
I live in Montreal, Quebec
Post by: jedgar on December 07, 2002, 03:23:00 AM
Hmmm, my X: is not always zero. In fact, when I don't allow a net connection, my X: has a number set and my Y: and Z: are all zeros.
Post by: wilchy on December 07, 2002, 04:24:00 AM
X 8000-0011
Y 0000-0000
Z 0000-0000
Mines a US Xbox.
Post by: wilchy on December 07, 2002, 05:05:00 AM
Only a thought though.
Post by: Ratty on December 07, 2002, 05:30:00 AM
x: 0001 - 8005
y: 00A8 - 6800
z: 8015 - 190D
Post by: FarmerB on December 07, 2002, 06:13:00 AM
I was shitting it
after reading the news on xbox-scene then checking my xyz codes on my Matrix mode 3 box but I got the excact same readings as you when connecting on automatic..PHEW
Post by: Ius on December 07, 2002, 06:23:00 AM
I haven't looked at Z at all, and not much at Y, but I'm almost certain X and Y are sets of bitflags (I think probably Z too). That is, if you convert the numbers to binary, each bit represents a flag. 1 for on, 0 for off. It's about 7am and I haven't gone to sleep yet, so I'm going to make this quick and post what I've got so far and do some more tomorrow.
I'll describe them as:
X1X2 - X3X4
that is, X byte 1, X byte 2, etc.
And the flags I'll refer to as
X1.1 - 8
that is, X byte 1, flag(bit) 1 - 8.
Guesses so far:
X3.1 - IP Setup correctly
X4.4 - No cable detected
X4.5 - DNS Failure (set if both OR either DNS fails)
X4.6 - Manual IP config?
X4.7 - Cable detected, but not working
This would explain why working connections always seem to have X3 at F*. F means all four first flags are set, which appears to indicate success in those four areas. IE, in my test where I gave it the same IP as my PC and got an IP conflict, I got an X3 of 08, which means none of the first 4 flags are set. The only time I've seen flag X3.1 not set is when it can't get an IP.
Btw, fuzzy, did you actually get an X3X4 of F021 like you've used in your examples? If so, what was your setup? I've haven't seen X4.3 set and the X4s are what I've got the most on.
If anyone has info that doesn't fit with my theory lemme know, this is just what I came up with off no sleep at 7am
I'll post some of my more interesting numbers/conditions for you tomorrow fuzzy.-Ius
Post by: ShinRyuu on December 07, 2002, 06:47:00 AM
cable unplugged:
X: 8000-0011
Y: 0000-0000
Z: 0000-0000
All automatic:
x: 0000-F001
Y: 00A8-6840
Z: 8015-190D
My mod is enabled all the time. It's a X-ecuter. Even during LIVE installation and account setup on Nov 15. I'm in Canada.
Post by: warbeast on December 07, 2002, 08:42:00 AM
x: 0000-f001
y: 00ab-4840
z: 0000-0000
so whats the score can ms tell i have had a mod in my xbox and ban it anyway ?
Post by: skippy911 on December 07, 2002, 08:30:00 AM
Z:8015-190D
For thier Z number.
Also seems when a cable is unplugged it gives:
X 8000-0011
For the X number.
I don't have xbox live but these are findings gathered from peoples posts here. Hope it is somewhat useful.
skippy911
Post by: NightRain on December 07, 2002, 08:44:00 AM
Post by: Fuzzy on December 07, 2002, 08:55:00 AM
| QUOTE |
| Maybe you already knew this but it looks like all banned xbox's have: Z:8015-190D |
as for that, these numbers both have NOTHING to do with modchips. Sorry dude but inferences without enough info dont work
. 8015 im working on (nightrain id like to talk with you some time about it) and 190D has to do with recieving packets and other info.
Post by: warbeast on December 07, 2002, 09:47:00 AM
i dont know shit about a fix for this but
could there be a way to make a tunnel for r pcs so r pc sends live the right code and r xboxs dont get banned
Post by: Fuzzy on December 07, 2002, 09:56:00 AM
Post by: warbeast on December 07, 2002, 10:36:00 AM
Post by: Fuzzy on December 07, 2002, 10:12:00 AM
Post by: realdream on December 07, 2002, 10:17:00 AM
My box is v1.0 4034. HDD 100 Go, Evox 2.6 Eject trick.
XBL FRANCE
IP Manu
DNS auto
X : 0001 - 8005
Y: 00A8 - 6000
Z : 8015 - 190D
XBL FRANCE
ALL Auto
X: 0000 - F0001
Y: 00A8 - 6860
Z : 8015 - 190D
Post by: Knightshado on December 07, 2002, 11:27:00 AM
XBL with no connection problems, and not Banned.
X: 001C-F003
Y: 00A8-4800
Z: 0000-0000
Post by: Fuzzy on December 07, 2002, 11:38:00 AM
Post by: Icculus on December 07, 2002, 11:42:00 AM
Post by: BlueMnky on December 07, 2002, 11:45:00 AM
y:00A8 - 4860
z:8015 - 1917
HomeBrew EvoX2.5 - Ybox/orange - External On/Off switch
USA
Not Banned - XBL Working
v1.0
Full Auto Setup
Original HDD
Cable Inet
Post by: Fuzzy on December 07, 2002, 12:07:00 PM
| QUOTE (Icculus @ Dec 7 2002, 06:42 PM) |
| Hey fuzzy...front page news! Congrats man |
i couldnt believe it myself until i asked xantium about it (thanks again man)
Post by: admiralj on December 07, 2002, 12:21:00 PM
y:00A8 - 4860
z:8015 - 1917
pcbioxx w/evox 2.5 on usa v1.0 xbox. (of course i disable the chip for live)
locked 120gb hdd.
DHCP enabled on live setup.
Live working 100%.
cable connection.
Post by: Dools on December 07, 2002, 03:23:00 PM
i got my xbox last year when they came out and i live in the US. i couldn't play live so i took out my mod chip and left my 80gb hdd in there and i still couldn't connect to live. my code was:
X: 0000-F001
Y: 00C2-03C0
Z: 0000-0000
then i took out my hdd and replaced it with the regular one and my mod chip was still out and got the same error that it can't connect to xbox live and my code then was:
X: 0000-F001
Y: 00A8-6840
Z: 8015-190D
whats up with that? i can't play xbox live anymore, that sucks
Post by: penguinofdoom564 on December 07, 2002, 03:48:00 PM
Y: 00A8-4840
Z: 0000-0000
Xecuter (v1) with a switch (disabled...duh). Everything else on the box is virgin, no changes whatsoever. I've been connecting fine since day one. BTW, i'm in the US. Guess they didn't detect it at all. Keep up the great work fuzzy!
Post by: ZPaul2Fresh8 on December 07, 2002, 03:51:00 PM
USA, Version1.0 (Nov01), 120G HDD, Matrix Mode4, EvoX 2.6 eject trick....
As of now I'm not sure if this info will be any help...
I had no problems with XBL during beta, but since the launch of live I've heard about people being banned so I never updated to the retail disc yet. I'm waiting to see what the fix will be. But anyhow here's my info without being connected and having beta(Don't think it matters with no connection!)
X 8000-0011
Y 0000-0000
Z 0000-0000
IP Manual and Auto are the same results
DNS Auto
Nice work so far, people like you make this community go 'round
Maybe with some influencing I'll update the Retail and see what happens...
Oh yeah, I was running MotoGP Beta off HDD.
Post by: emailer33 on December 07, 2002, 06:55:00 PM
1.00.4920.01 << dashboard version
X: 0000 - F001
Y: 008A - 0DE4
Z: 8015 - 1917
and it says no packets whatsoever were sent.
and i noticed realdream mention taht in the Y code A8 was common among banned membres, but mine as you see says 8A. dunno if it means anything
. hope this helped.
Post by: Ius on December 07, 2002, 07:17:00 PM
(sorry for the length, but hopefully they'll help)
I'm using a v1.0 with xecutor1, always been disabled for live. US, DSL, Not banned, everything works fine. Everything on my xbox should be factory with the chip off except some files on the HD.
In case it's relevant, I have my xbox hooked up to my LAN, my windows XP PC running as a router.
[EDIT - I pasted it wrong. I labled it auto IP, but pasted the manual. Here's the right numbers for auto]
IP Auto - DNS Auto - Working
And
IP Auto - DNS Manual - Working (gives same numbers):
X: 0000 - F001
Y: 00A8 - 4860
Z: 8015 - 1918
Manual IP - Auto DNS - working:
And
Manual IP - Manual DNS - working:
X: 0001 - 8005
Y: 00A8 - 4800
Z: 0000 - 0000
[/EDIT]
Here I screwed up the IP settings:
All Y and Z numbers were 0 here. I'm asuming it didn't get to the rest of the tests since it failed at the IP config.
Manual IP (set to conflict with my PC's) - Auto DNS - Not working:
X: 8000 - 0805
Manual IP (set to conflict with my PC's) - Manual DNS - Not working:
X: 8000 - 080D
Manual IP (gateway set wrong) - Auto DNS - Not working:
X: 8001 - 9005
Manual IP (gateway set wrong) - Manual DNS - Not working:
X:8000 - 100D
(Notice the 90 changed to 10. That would happen if X3.1 is 0 here and 1 in above. I had thought that bit had something to do with weather or not it could get a valid IP. *shrug* X2 changed too. Strange.)
Manual IP (Subnet mask set wrong) - Auto DNS - Not working:
X: 8001 - 8205
Manual IP (Subnet mask set wrong) - Manual DNS - Not working:
X: 8000 - 020D
Here I screwed up the DNS settings:
Manual IP - Manual DNS (set wrong) - Not working:
X: 0000 - 000D
Y: 008C - 0000
Z: 0000 - 274C
Auto IP - Manual DNS (set wrong) - Not working:
X: 0000 - F009
Y: 008C - 0060
Z: 0000 - 274C
Auto IP - Manual DNS (primary bad, secondary good) - Working:
And
Auto IP - Manual DNS (primary good, secondary bad) - Working:
X: 0000 - F009
Y: 00A8 - 4860
Z: 8015 - 1918
Here I just started throwing stuff at it to break it for more numbers
(Y's and Z's all 0's again)
Cable Not Connected:
X: 8000 - 0011
Crossover to hub (so it detected a cable, but it wasn't working) - Not working:
X: C000 - 4003
I just threw in a random IP that didn't match my network's - Not working:
X: 8001 - 8405
Note how all the 05's changed to 0D's when I changed to manual DNS settings up in the 'messing with IP settings' section. That would suggest that X4.5 indicates manual DNS settings. Also note though, that if everything's working, it doesn't seem to apply. If ONE DNS server is bad, but the other is good, it does still set that bit. So if that's correct, it only reports manual/auto DNS if there's some kind of failure.
There's my numbers and my thoughts. Good luck fuzzy.
-Ius
Post by: Fuzzy on December 07, 2002, 07:51:00 PM
Post by: ZPaul2Fresh8 on December 07, 2002, 07:58:00 PM
But WHEN exactly does Xbox Live ban users? I'm guessing with the Retail Update correct? I haven't update to retail yet so I'm unsure...
Hey fuzzy do you have MSN messenger?
Post by: Fuzzy on December 07, 2002, 09:18:00 PM
They ban them any time the modchip is enabled and you send info to MS. Yes i have msn messenger and aim.
Post by: SlaYer on December 07, 2002, 09:23:00 PM
( See my previous post on page 2 of this thread )
Well, I got an eeprom dump from another xbox and flashed mine with the data. For reference it was Superfro's program EEPromerv0.4 that made it possible! (PLEASE DO NOT EMAIL AND ASK ME FOR IT!)
Superfro, you RULE man, Thank you!!!!!
I did have to recover the account but that was not too difficult. It was like installing my account on another xbox. Very easy and it's done through account management.
OK, here are the old settings:
1.00.4920.01
X: 0000 - 000D
Y: 00A8 - 6800
Z: 8015 - 190D
UL: 0KB DL: 0KB
L: 0 P: 0 / 0
And here are the new settings after the eeprom switchover:
1.00.4920.01
X: 0000 - 000D
Y: 00A8 - 4800
Z: 0000 - 0000
UL: 9765KB DL: 3530KB
L: 105 P: 8 / 8
I'm in the US, use a BioXX (detailed setup is in my sig) and both IP and DNS are manual.
Good luck everyone and remember not to try to get on LIVE with your mod ON!
Post by: fatbastard911 on December 07, 2002, 11:19:00 PM
| QUOTE (wilchy @ Dec 7 2002, 10:48 AM) |
| Just got Xbox Live, Took Evo X off my HDD and got rid of other bits n bobs so my HDD is like the original. X-ecuter 1.1 installed. (no switch yet) Not even attempted connecting yet but have installed Xbox Live. My X, Y, Z numbers are as follows. X 8000-0011 Y 0000-0000 Z 0000-0000 Mines a US Xbox. |
I have a box that the eeprom was switched with a working one, with an xecuter modchip switched, ive entered the xbox dash w/ modchip on and yet no ban. I can enter XBL perfectly.
With my XBL connection disabled from the lan I get;
X 8000-0011
Y 0000-0000
Z 0000-0000
aswell.....
And with XBL live working (Wait till you here this Fuzzy) my code is
X 0001 8005
Y 00A8 4800
Z 0000 0000 it's the exact same as Ius' codes......
the 0001 is not 0000 like it should be but XBL WORKS FINE. Fuzzy - you said you have never heard of a case were XBL was working and X was different to 0000. So here You go I hoped that helped. And by the way the guy a few posts above me said with his banned XBOX he had X 0001 8005
Y 00A8
which was the same as myself, but he was banned, so I beleive the banning may primarily take place in the last part of the y and z cordinate = 6800, 4800, 4860, etc... that's the most important part as I can see cause he was banned and I was not and his code was exactly the same when he tried to connect up to XBL
Anyways..... Good luck! And tell me if u want me to do anything else to see any differences.
Post by: G16aByT3 on December 08, 2002, 02:30:00 AM
BIOS: 4034
MFD: 12-15-2001
LOC: Canada
All settings Auto with router having UPNP on
X:0000-F001
Y:008A-0FE0
Z:AFFF-0018
---------------------------------------------------------
static IP/DNS auto UPNP on
X:0001-0000
Y:0000-0000
Z:0000-0000
---------------------------------------------------------
all settings static UPNP on
X:0000-0000
Y:008A-0F80
Z:AFFF-0018
---------------------------------------------------------
no cable connected
X:8000-0011
Y:0000-0000
Z:0000-0000
---------------------------------------------------------
settings all auto, xbox IP blocked, UPNP on
X:0000-F001
Y:008C-0060
Z:0000-274C
---------------------------------------------------------
settings all auto, UPNP off
X:0000-F001
Y:008A-0FE0
Z:8015-1917
---------------------------------------------------------
modchip on with X2-4973, static IP,auto DNS, UPNP off
X:0001-0005
Y:0000-0000
Z:0000-0000
---------------------------------------------------------
modchip on with X2-4973, settings auto, UPNP off
X:0000-F001
Y:008A-0C22
Z:AFFF-0018
---------------------------------------------------------
modchip on with evox2.6, static IP,auto DNS, UPNP off
X:0001-0005
Y:0000-0000
Z:0000-0000
---------------------------------------------------------
modchip on with evox2.6, auto settings, UPNP off
X:0000-F001
Y:008A-0FE0
Z:8015-1917
Since everyone is being banned with 6xxx in the 2nd part of Y, I can't seem to get a 4xxx or even a 6xxx to figure out whether I am banned or not.
But the interesting thing is that UPNP which the XBL relies on for communication changes in Z when you enable disable UPNP on your linksys router..Happy Hunting.
G16aByT3
Post by: vash_ts on December 08, 2002, 08:05:00 AM
Post by: Fuzzy on December 08, 2002, 08:56:00 AM
Post by: quisp on December 08, 2002, 10:05:00 AM
Post by: Fuzzy on December 08, 2002, 10:10:00 AM
Post by: Col.Havoc on December 08, 2002, 10:48:00 AM
X: 0000-F021
Y: 00A8-7860
Z: 8015-1917
V1.0 Xbox, Matrix (mode 3), NTSC, HUB, Automatic everything, original (modified through eeprom) MAC address,
Post by: Katonta on December 08, 2002, 10:55:00 AM
| QUOTE (1wolf1 @ Dec 7 2002, 11:23 PM) |
| Great News Everyone! GOT XBOX LIVE TO WORK AGAIN! |
k, I have a question. First: great work undead, fuzzy, 1wolf1, and everyone else that is part of this.
?: Does MS have a way to detect 2 of them same eeproms goin on line at same time? ie. if you take an eeprom image from a working xbox and load it onto a banned xbox and try to use both xbox's on XBL at the same time will their be complications? If not, great! If so, then I dont see how this would be any better than the buy-swap-return method or buy-dump-return method that we have been flaming alot of people for.
Can someone clear this up for me (if its known yet) as I maybe missing some important info..thanks
Post by: hawkswim32 on December 08, 2002, 11:19:00 AM
X:0000-F001
Y:00A8-4860
Z:8015-1917
UL: 98 Kb DL: 4172 Kb
L: 54 ms(63 ms) P: 8/8
Running a modded XBOX with the Xodus/Matrix chip (bios 2.5 colormod.ybox) in mode 3. Never ran xbl dasboard with mod chip enabled or run a XBL live enabled game with mod chip enabled.
Maxtor 120 gigabyte harddrive - locked. All backups are of games that I have bought. Only play with retail dvds when going on live.
Again, evolutionX is ybox.
Hope this helps a little ...
Oh and v1.0 xbox if you couldnt figure that out from the 4920.
Post by: mid_gen on December 08, 2002, 01:28:00 PM
v1.0 US (being used in UK) xbox, matrix mode3, not banned.
80Gb MAxtor HDD installed and locked. IP/gateway/DNS settings all manual.
Rather spartan results :
X 0000 0000
Y 00A8 4800
Z 0000 0000
Post by: Fuzzy on December 08, 2002, 01:31:00 PM
| QUOTE (Katonta @ Dec 8 2002, 05:55 PM) | ||
k, I have a question. First: great work undead, fuzzy, 1wolf1, and everyone else that is part of this. ?: Does MS have a way to detect 2 of them same eeproms goin on line at same time? ie. if you take an eeprom image from a working xbox and load it onto a banned xbox and try to use both xbox's on XBL at the same time will their be complications? If not, great! If so, then I dont see how this would be any better than the buy-swap-return method or buy-dump-return method that we have been flaming alot of people for. Can someone clear this up for me (if its known yet) as I maybe missing some important info..thanks |
well id assume they would but i think its unlikely that it would be right away. I think theyd have to lookf or it to find it know what i mean?
Post by: warbeast on December 08, 2002, 01:33:00 PM
Post by: Fuzzy on December 08, 2002, 01:37:00 PM
(but seriously, can i, pm me please) I wanna play around with a working live configuration but im banned
Post by: TeBear77 on December 08, 2002, 04:26:00 PM
Before i switched to the other banned eeprom
mod off i am getting
x: 0000:F001
Y: 00AB-6860
Z: ...
aka the y number 6860 meant i was fucked
now threw up the new eeprom though banned on the kid i got it from is now:
x:0000-f001
y:00c2-03e0
z:8015-1917
supposively unbaned right? No well not as far as i could tell shut the mod off bootup in the xbox live cable connected, ip found, dns resolved, but still no xbox server found. gave good old xbox a call for 45 mins we unplugged my cable modem ran strait though... still no go
so to the xyz code i should be unbanned but i am not... though the s/n on the top of the xblive screen is still the s/n of the kid who gave it to me .... xbox tech support didn't know what to think of that when he asked for that and the one on the bottom of my xbox ... "What the fuck that isn't right" -xbox techie- also xbox gave me some insite on what one of the x codes stand forx:0000-f001 <-- you did not set your mac id
x:0000-f021 <-- manually set mac id
hope this helps you as you have helped me i have a conclusion that the accutal banning is on individual servers as far as xyz but the s/n is banned across the entire network system ... But i am pulling that out of my arse.
Thanks to pCeSlAyEr for the help. Post by: SlaYer on December 08, 2002, 04:36:00 PM
| QUOTE (Katonta @ Dec 8 2002, 05:55 PM) | ||
k, I have a question. First: great work undead, fuzzy, 1wolf1, and everyone else that is part of this. ?: Does MS have a way to detect 2 of them same eeproms goin on line at same time? ie. if you take an eeprom image from a working xbox and load it onto a banned xbox and try to use both xbox's on XBL at the same time will their be complications? If not, great! If so, then I dont see how this would be any better than the buy-swap-return method or buy-dump-return method that we have been flaming alot of people for. Can someone clear this up for me (if its known yet) as I maybe missing some important info..thanks |
Thanks for the shout out Katonta. But the biggest shouts should go to Superfro, Fuzzy and all the other awessome modders. (too many to list
)Well, the box I used belongs to a friend and was modded with an Xecuter 1.0 that cannot be made to dissapear, and as such it cannot go "LIVE". He agreed to donate his eeprom
I am curently looking into changing just the serial # on his (or potentially dropping my eeprom file into it, so if my friend goes LIVE by mistake it will not kill mine.
I am sure 2 xboxes could very well connect to LIVE with the same info, at least for now, but keep in mind that this system is totally under the control of M$ so nothing is set in stone. For anyone familiar with DSS they know what I mean.
I am wondering if anyone has successfully hex edited their eeprom file and changed the serial # and then re-flashed it without bringing the xbox to a grinding halt. If I understand this correctly the serial # is the only thing not encrypted in the eeprom so I will assume this will work. Am I wrong?
Post by: pride on December 08, 2002, 05:28:00 PM
1wolf1: pixel8, rustyball and I spent a day or two fucking with the eeprom code to see if just editing it will get me back on xbl. It changed the #s, I lost what they were (fucking HD died last night >_<) but suprerfr0 may still have them. Anyways, there's some sort of checksum routine done by XBL to create the #s. as you can see waaay far back in the thread, changing the serial, hd key, online key & mac address caused my Y & Z to be crazy. we tried switching each thing 1 at a time then all at once. We had no luck in getting my xbox on live. Since then, I've aquired an EEPROM for my xbox that works fine on live and have yet to be banned.
X: (who cares about this # anymore?) 0000-F001
Y: 00A8-4860
Z: 8015-1919
v1 xbox with multibios switches. Only use xbox dash with retail bios enabled...same with live (duh)
Post by: SlaYer on December 08, 2002, 05:40:00 PM
| QUOTE (pride @ Dec 9 2002, 12:28 AM) |
| yay for me. i shall give insight now: 1wolf1: pixel8, rustyball and I spent a day or two fucking with the eeprom code to see if just editing it will get me back on xbl. It changed the #s, I lost what they were (fucking HD died last night >_<) but suprerfr0 may still have them. Anyways, there's some sort of checksum routine done by XBL to create the #s. as you can see waaay far back in the thread, changing the serial, hd key, online key & mac address caused my Y & Z to be crazy. we tried switching each thing 1 at a time then all at once. We had no luck in getting my xbox on live. Since then, I've aquired an EEPROM for my xbox that works fine on live and have yet to be banned. X: (who cares about this # anymore?) 0000-F001 Y: 00A8-4860 Z: 8015-1919 v1 xbox with multibios switches. Only use xbox dash with retail bios enabled...same with live (duh) |
Thanks pride, but how exactly did you edit your eeprom?
I need to modify the serial # on an eeprom.bin file and though it looks like the # is in ASCI I want to make sure the xbox will still boot up after I change the serial # with a hex editor. Sorry this has nothing to do with LIVE but in essence it does cause it will prevent me getting banned in the future
Post by: Fuzzy on December 08, 2002, 06:02:00 PM
Post by: Kthulu on January 10, 2004, 09:19:00 AM
| QUOTE |
1.Turn off your modchip and go to the Xbox Dashboard. 2.Click on the Xbox Live Tab. 3.Go to Network Connections. 4.Wait for the Green Lights (or red X'es depending on your setup) to load. 5.Once they load highlight the help button. 6.Over the help button press the Y button. 7.An X code a Y code and a Z code will come up along with more packet data including upload and download speed. 8.Take note of these Numbers. 9.Post results in Xyz Code, Uncoded on the Xbox-Scene forums in the Xbox Live section |
at step 3 above, all i have is new account and account recovery...no Network Connections...
Post by: PhatTrax on December 08, 2002, 06:58:00 PM
Matrix Mod Off
DHCP Enabled
X: 0000 - F001
Y: 00A8 - 4840
Z: 0000 - 0000
Static IP
X: 0000 - 000D
Y: 00A8 - 4800
Z: 0000 - 0000
Cable Unplugged
X: 8000 - 0011
Y: 0000 - 0000
Z: 0000 - 0000
DHCP Enabled (DHCP Server Off)
X: C000 - 4003
Y: 0000 - 0000
Z: 0000 - 0000
Static IP (Gateway Off)
X: 8000 - 100D
Y: 0000 - 0000
Z: 0000 - 0000
This is all I'm limited to checking for now since all I have is Internet Connection Sharing with WinXP
Post by: Kthulu on January 10, 2004, 10:01:00 AM
i don't know much about this live stuff (obviously). i have never been on live and i never plan on do so. for my use, i don't care if i'm going to be banned or not. however, if i ever restore my box back to original and sell, i'd like to know if i'm going to be screwing the person i sell it to.
perhaps, the dashupdate proceedure makes no attempt to flag the box, so i don't have anything to worry about?
Post by: Fuzzy on January 10, 2004, 10:36:00 AM
Post by: Kthulu on January 10, 2004, 10:54:00 AM
| QUOTE |
| so wait you have a flashed TSOP and updated your xbox? (by accident) If all you have is the not MS bios then your banned. |
shit, that's what i thought. i've been waiting on xbtool to upgrade to x2-4980 which would have prevented this...my luck it will come out today or tomorrow
| QUOTE |
| Please dont double post |
sorry, didn't think that was double posting
Post by: SlaYer on December 09, 2002, 12:29:00 AM
| QUOTE (Fuzzy @ Dec 9 2002, 01:02 AM) |
| 1wolf1 its not the serial its the hdkey (ask undead about it) as for tebear i got those numbers from someone else who tried to switch their eeprom unsuccesfully and it looks right now that thats an error not a banned thing. |
But Fuzzy, the HD key is encrypted. The only thing not encrypted (and thus hex editable) is the serial.
Are you saying that even if the serial is changed and my friend tries to get on XBLIVE I will be banned bacause I am using the same HD key but a different serial?
I guess I will just need a eeprom.bin file with a bogus serial and HD key, something like 0101010101....
I really wish that Superfro had an eeprom editor like he made the fanCbox tool for the bios. hint hint hint....
Does ANYONE know how to replace the serial and HD key with bogus stuff?
I do not care about the date allowing you to get on XBLIVE, I just want an eeprom.bin I can program into my friend's box so he cannot get me banned!
Post by: Keva on December 09, 2002, 12:34:00 AM
| QUOTE (warbeast @ Dec 7 2002, 04:11 PM) |
| looks like its the 6840 i dont know shit about a fix for this but could there be a way to make a tunnel for r pcs so r pc sends live the right code and r xboxs dont get banned |
this is a good queestion id like ro know the answer
Post by: opjose on December 09, 2002, 01:52:00 AM
I've been able to confirm that an 8015 in the first Z field indicates (only IF you have a full and valid connection to the internet/xblive servers) that your EEPROM is "consistent".
E.G. if you are able to change the HD key and get back a 8015, as far as the kerberos servers were concerned your EEPROM's state is "good". Meaning that the servers think that the encrypted stuff is ok.
The information in the "user" area of the EEPROM does not seem to affect the 8015 results.
This does NOT mean that you can get on XBLive however.
It DOES mean that once we can get 8015 values out of generated HD key's we will have the right formula to unban Xboxes!!!!!!!
This is a BIGGGGGGG Hint for the hackers.
All bets are off if the connection is bad however.
Post by: undead on December 09, 2002, 09:08:00 AM
did you change "just" the HDD key and recalculated the hash & hdd password ?
or dit you just mess with the first 48 bytes in general and not correctly calculated the hash etc..
Post by: Sev on December 09, 2002, 02:26:00 PM
As these values are definitely bitfields, it's worth hammering down what details aren't needed - like maybe most of X.
It also looks like some parts of Y and probably all of Z relies on some interaction with the Live servers.
Post by: SuperV on December 09, 2002, 03:28:00 PM
ip 1.00.4920.01
X: 0400-F001
Y: 0000-0001
Z: 000 - 0048
Those are my numbers
I have installed my live thru unreal and haven't bought the starter kit. Now my friend who did the same can connect to xbl and i can't it detects everything and then says xbl not found. It's clear I am not modded but I am using a hub and my chip is a matrix i put it in mode three and there are the numbers anyone know why i can't connect to it. Is it cause i need to get the starter kit ????
Or is it cause me and my friend installed live from teh same Unreal Championship cd ???? anyhow there are the numbers.
Thx
Post by: digital][stupor on January 12, 2004, 06:44:00 PM
XYZ
1.00.5659.03
W: 0000-000B
X: 0000-F001
Y: 00A8-6860
Z: 8015-190D
The 6 is there in the second part of the Y category, which has proven to be pretty indicative of a banned EEPROM!
BUMMER! Funny thing is, I haven't played an online game in forever, but, I was thinking that I would give Crimson Skies a shot soon...and of course, downloading the new Splinter Cell maps and all sorts of goodness that comes through that service is well worth it IMHO. Now to find a EEPROM that I can use to change this situation!!!!
Post by: Fuzzy on January 13, 2004, 04:11:00 PM
What we really need now are C codes and other odd codes like that with details. No more regular or plain banned codes are needed. Thank you
Post by: opjose on December 09, 2002, 08:39:00 PM
| QUOTE (undead @ Dec 9 2002, 04:08 PM) |
| Hey opjose, did you change "just" the HDD key and recalculated the hash & hdd password ? or dit you just mess with the first 48 bytes in general and not correctly calculated the hash etc.. |
I was initially randomly playing with the HD Key, but of course that's tied to the hash...
So I started grabbing headers from banned and unbanned Eeproms.
When the data is "consistent" (e.g. from a valid header) you'll see the 8015 code every single time, weather banned or not.
So it seems that the 8015 code is a tipoff that as far as the kerberos servers are concerned the EEPROM is valid, the user area not being important....
AFAIK this should be a pretty good clue as to if you've hit on a combination of values that the servers will accept. Once you can get consistent acceptance, heck you could randomly pick HD keys from generated valid values.
Post by: teetu on December 09, 2002, 10:23:00 PM
0000 F021
00A8 6820
8015 190D
Post by: Lanjao on December 10, 2002, 03:59:00 AM
I have x-ecuter 1.0 installed with a switch. I though the ban happened because I forgot to turn the switch off 2 days ago, then noticed that I couldnt connect to the game (live connection tested fine), so I cold booted the xbox and turned teh switch off. Works fine for the rest of the day but the next day, it fails to connect to xbox live server in network testing.
auto IP auto DNS
1.00.4920.01
X: 0000 - F001
Y: 00A8 - 6860
Z: 0815 - 190D
in an unrelated subject, xbox live in Japan, we only get the game Re-Volt (car racing game) on the starter CD, then some stupid chess/board game CD and then Phantasy Star Online Episode I&II.
Post by: Keva on December 10, 2002, 04:07:00 AM
Post by: Keva on December 10, 2002, 07:00:00 AM
X 0000 - F001
Y 0A68 - F860
Z 8015 - 1917
Post by: R3PL1C4 on January 16, 2004, 07:39:00 PM
X:0000-F001
Y:008A-0FE0
Z:AFFF-0018
I know im banned but im not getting modified xbox error and its definetly not a network setting.
got a new eeprom and works perfect with same setup. i now get the ussual:
X:0000-F001
Y:00A8-4860
Z:0000-0000
All cables connected and all on auto. i have a ver. 1.1 xbox with a xecuter 2.2lite+ and XBL 2.0
Post by: Fuzzy on December 10, 2002, 08:57:00 PM
Post by: Sincerex on January 18, 2004, 08:16:00 AM
.I was banned once from Xbox Live and purchase a new eeprom back in December and it work fine, till now.
I don't understand. I login fine a few weeks ago but now I'm unable to login.XYZ info...
W: 0000 - 000B
X: 0000 - F001
Y: 008A - 0FC0
Z: AFFF - 0018
Help...
Post by: Sincerex on January 19, 2004, 05:24:00 AM
Post by: MagamiAKO on December 11, 2002, 07:32:00 AM
Following xbox information:
Static configuration:
IP 192.168.0.11
DNS 192.168.0.1
gateway 192.168.0.1
subnet 255.255.255.0
Hard drive WD400BB unlocked
Modchip:
Matrix chip with xecuter2 4973 bios
HERE ARE MY CODES:
X: 0000-000D
Y: 00BA-0C02
Z: AFFF-0018
When i set all of the network settings to automatic, I get:
X: 0000-F001
Y: 00BA-0C22
Z: AFFF-0018
Now i'm not sure if the Y code is 008A or 00BA it looks more like a B so that's what i'm putting down.
Post by: Slikmastah on January 19, 2004, 11:11:00 AM
Post by: Fuzzy on December 11, 2002, 02:48:00 PM
Post by: Fuzzy on January 21, 2004, 09:19:00 AM
| QUOTE (JaXbox @ Jan 20 2004, 03:01 PM) |
| Have I been banned ? (it cant figure out why I cant connect to Xbox Live, eventhough all my test-connects workout perfectly fine) XYZ codes: 0000 - F001 00A8 - 4860 0000 - 0000 Can any of you guys help me out? Edit: false alert - it turned out that XboxLive was somehow "overloaded" in my region (eventhough that sounds strange) - at least that was what the M$ support-guy said. |
Posts like this aren't needed! If you had read the first topic you would know that the 4 in your second Y code checks you out fine! Please guys read the first page first (even though some of it is wrong
)
Post by: dr.no on January 21, 2004, 11:14:00 AM
X: 0000-000D
Y: 00AB-E800
Z: 0000-0000
Xbox live is not found. What does 'E' mean? I found nothing about that.
Check out my thread:
http://forums.xbox-s...T&f=53&t=158443
Post by: teetu on December 11, 2002, 06:27:00 PM
0000 F021
00A8 6820
8015 190D
Now I flashed my eeprom with a unbanned one (yay for me!)
0000 F021
00EA 4960
8015 1917
Has everyone that flashed their eeprom had to do an account recovery?
Post by: deacon187 on January 21, 2004, 09:08:00 PM
| QUOTE (Fuzzy @ Nov 27 2002, 06:08 AM) |
| 1.Turn off your modchip and go to the Xbox Dashboard. 2.Click on the Xbox Live Tab. 3.Go to Network Connections. 4.Wait for the Green Lights (or red X'es depending on your setup) to load. 5.Once they load highlight the help button. 6.Over the help button press the Y button. 7.An X code a Y code and a Z code will come up along with more packet data including upload and download speed. 8.Take note of these Numbers. 9.Post results in Xyz Code, Uncoded on the Xbox-Scene forums in the Xbox Live section |
isnt that for the original xbox live with 2.0 i havent found a way to c heck i loved the original caue it told you UL and DL speeds i havent figured out how to check this with 2.0
Post by: Fuzzy on January 22, 2004, 09:29:00 AM
| QUOTE (dr.no @ Jan 21 2004, 04:14 PM) |
| 1.00.4920.01 X: 0000-000D Y: 00AB-E800 Z: 0000-0000 Xbox live is not found. What does 'E' mean? I found nothing about that. Check out my thread: http://forums.xbox-s...T&f=53&t=158443 |
Got anymore info on that?
Post by: pride on December 12, 2002, 01:06:00 AM
Post by: ArMaGeDdOn on December 12, 2002, 02:43:00 AM
| QUOTE (Fuzzy @ Nov 27 2002, 03:08 AM) |
| This is a re-post of my discoveries as a seperate topic. Ok, ive looked through a lot and here's how its working. X. First of all, the first four numbers of x should always be zeros. They SHOULD always but I haven't seen one that isn't (if yours isn't contact me.) Y. 00A8 seems to be common among banned and not banned boxes. Now here is where the problem is. Apparently 6860 indicates an LPC mod that is enabled or a non switched non-LPC mod enabled. 6820 means that the system had once had a modchip in it but at the moment is not running. Other wise it should be something like 4840 or 4820. Z. The last row (a.k.a Z) has to do with packets and trashed responses. The first 4 numbers deal with response on whether is banned, will be banned, or is not banned. It looks like 8015 is banned/to be banned and 0015 is already banned but depending on type of chip you have you may never get this number (LPC or other). The last 4 numbers are a combo. The first two (19 generally) have to do with which live region your in (dont ask) the second two have to do with packet receiving. D is no packets, C is two packets one trashed, 17 is trashed but readable packet. 0000 is any amount of none trashed packets. A good code should look something like this: X: 0000-F021 Y: 00A8-4840 Z: 0000-0000 This is what I have deciphered and I believe it is 99.9% correct. I hope it is of some use to Zander, Opjose, Undead, Or someone. Thanks for your time |
great work fuzzy. is it possible to change the XYZ code? do we know where its info is kept?
Post by: jizb on January 23, 2004, 10:56:00 AM
I've got a modded xbox v1.3, x2.3 pro with x2 4980 BIOS, and an 80 gig Seagate HD. When trying to sign onto Live with the 80 gig HD, I get an "Xbox Live not found" error, and my Y code is 00C2-0060 (full connection to router, and then to the internet).
When I swap the 80 gig out and reinstall the original 10 gig HD, I can sign onto Live without any problem. I noticed that when I unplug the connection from the router to the internet and try again with the 80 gig HD installed ,the Y code changes to 00C3-0060.
When the original HD is installed the Y code is 00A8-4860.
I've read somewhere on this thread that this may be related to how ConfigMagic Final locked my drive? Perhaps I'll reformat and use the "long" method of preparing a new HDD and locking it...
Has anyone else encountered this? If so, did you have any luck??
Post by: emanboss on January 23, 2004, 12:17:00 PM
w-0000-0015
x-0000-f001
y-00c2-03e0
z0000-0000
Please help!
Post by: bgrill27 on January 23, 2004, 07:08:00 PM
W 0000 000B
X 0000 F001
Y 00C2 01A4
Z AFFF 0018
The rep told me that this problem is common with some old xboxes. He said how when xblive first came out that a bunch of people had the same problems as me. He said MS would repair it for free - yeah right, i have a modded box.
I know that lots of people have been posting that they have the 00C2 and that they have an upgraded HDD, so it could be that, but if M$ offered to repair it for free, that means that people w/o a modded box probably have had the 0062 Y code. I don't know what to do about live, b/c I don't think that I need a new EEPROM, but who knows...
Post by: Fuzzy on December 12, 2002, 01:34:00 PM
Post by: sean_numark on January 25, 2004, 06:31:00 AM
1.Turn off your modchip and go to the Xbox Dashboard.
2.Click on the Xbox Live Tab.
3.Go to Network Connections.
There is no Network Connections in the Xbox Live Tab?
Any other way to check, BTW the box has been banned and got a new epprom.
Post by: pride on December 12, 2002, 05:45:00 PM
Post by: jizb on January 26, 2004, 07:38:00 AM
Here's an update on my situation. Once again, it's a v1.3 xbox with an x2.3b pro installed, and I upgraded the HD to an 80 gig 7200rpm Seagate.
Anyway, when I used Slayer's Evo-X to prepare the new HD and install the various apps (and then used ConfigMagic Final, which I installed myself), I couldn't play on Live - well, I couldn't connect, kept getting an "Xbox Live not found" error, even though the chip was turned off and all the cables were plugged in - the Y code was 00C2-0060.
I reformatted the 80 gig drive and used the "long" method of preparing the HD, using a PC and LiveInfo, hdlock/hdunlock, and Norton Ghost to clone the Xbox HD to the 80 gig HD. Now I can play on Live no problem! the Y code (when router is disconnected from internet) is now 008C-0060.
Hope this helps some of you guys out there.
Here's a link to the tutorial I used: http://forums.xbox-s...T&f=41&t=105803
(Note, in this one it says *not* to use hdprepar - I however *did* use hdprepar to zero the first 4096 sectors of my 80gig drive).
Post by: TigerHawk on January 26, 2004, 09:44:00 AM
X: 0000-000D
Y: 00A8-4800
Z: 0000-0000
Modded 1.0 Xbox, never banned, using 1.1 EEPROM
W: 0000-000B
X: 0000-F001
Y: 00A8-4840
Z: 0000-0000
Unmodded 1.5 Xbox
PS- On Live 2.0 Network Connections is under settings
Post by: bgrill27 on January 26, 2004, 02:39:00 PM
I previously had the 00c2 y code and xblive could not be found. I got a new eeprom, and all is well. I did not have to reformat my hdd, but did have to shell out 7 bucks.
Post by: JLR on January 26, 2004, 03:58:00 PM
| QUOTE (sean_numark @ Jan 25 2004, 03:31 PM) |
| Just checked my Xbox 1.Turn off your modchip and go to the Xbox Dashboard. 2.Click on the Xbox Live Tab. 3.Go to Network Connections. There is no Network Connections in the Xbox Live Tab? Any other way to check, BTW the box has been banned and got a new epprom. |
I am the same, not on my xbox either, I got the v1.0 with excuter2 chip
Post by: thebuffman on January 27, 2004, 01:44:00 AM
Post by: teetu on December 13, 2002, 12:51:00 AM
Anyways, at least it can post that even with the new eeprom, my numbers than reverted back to the same exact ones I was originally banned with (see above). I thought they might be slightly different because of the different eeprom, but they aren't.
Post by: TigerHawk on January 27, 2004, 06:35:00 AM
I ran update EEPROM, and nothing happened to me.
Post by: thebuffman on January 27, 2004, 07:55:00 PM
When I modded my buddies xbox I used a ghost image of my 120gb Xbox harddisk and slapped the ghosted harddisk into his xbox. I think this is where the eeprom.bin information became corrupted for his system because from what I understand each system must have a unique eeprom.bin. His system doesn't list a S/N # when a accessing the WXYZ information. I tried backing up his xbox but the newly produced eeprom.bin file couldn't save the day after placing it in the config magic final /data folder and updating with this eeprom.bin file. I was hoping that it would work, but no cigar.
At this point I am going to restore his system with the original harddisk and try this tutorial:
http://forums.xbox-s...T&f=41&t=105803
Hopefully this will resolve the issue. If anyone has any other ideas, please let a brother know.
ps. I always thought that if he tried accessing Live with a duplicate eeprom.bin he would get banned. The codes on his system does not reflect a ban. See below for the code on my box and the code on his box. They are just shy of being identical. I wish someone could explain in futher detail to me how this could come about and why I can't alter it by just doing a new backup of his system and using the eeprom.bin file generated by his system to fix this problem.
My Codes:
S/N: <removed>
1.00.5659.03
W: 0000 000B
X: 0000 000D
Y: 0088 1C00
z: 0000 0000
My Buddies Codes:
S/N -
1.00.5659.03
W: 0000 000B
X: 0000 000D
Y: 00C2 0002
Z: 0000 0000
Thanks for any comments or insight...
Post by: emanboss on January 27, 2004, 08:04:00 PM
Post by: TigerHawk on January 28, 2004, 12:08:00 PM
Post by: thebuffman on January 28, 2004, 01:23:00 PM
Post by: MadEx on December 13, 2002, 11:09:00 AM
First off, I have a banned X-Box (no idea how it happened, I never tried to go Live with my chip enabled I was always smart about it). Now, if I get the EEPROM dump from someone who has an unbanned X-Box, could MS detect that I am using the same as the other guy and therefore limit the Live access kinda like people sharing CDkeys for playing PC games online? In other words, if someone sends me their EEPROM dump, will it inconvinience them later? Does it matter if the EEPROM goes from a 1.1 version X-Box to a 1.0? Is there anything else I need to know about this process? I want to depseratly want to get back online, and have the means (other people) of doing it. Just don't want them to get shited on later.
Also, if unbanning an X-Box is simply the process of flashing the EEPROM with a "good" image, then wouldn't it simply be possible to buy an X-Box (assumption), dump the EEPROM, and everytime the box is banned my MS simply reflash the EEPROM? Theoretically this could work, but you guys are the experts.
Props to all those working on figuring out these codes.
Post by: thebuffman on January 28, 2004, 06:36:00 PM
This is utterly confusing as the WXZ data did not change (see previous post above). The only thing that changed was Y: 0088 1C00. It is EXACTLY the eeprom of MY box.
So in a nutshell this is what happened:
ghost my hard drive to his new 120gb drive
run config magic and lock his drive and run update eeprom (don't know if update really did anything)
notice we both have the same eeprom data
try going online with his box and get the "cant find live" error
notice his eeprom has the Y:00C2 code
swap his upgrade drive with xbox original
access xbox live without a problem
check the eeprom data and it is still exactly like mine except this drive gains access to Live
looking for a new eeprom.bin file because one of us is bound to get banned using same eeprom data
Is this useful to anyone?
Post by: emanboss on January 28, 2004, 09:46:00 PM
W 0000-0015
X 0000-F001
Y 008A-0FE0
Z AFFF-0018
Could this be my ethernet port on my xbox. I noticed when I ftp that sometimes it freezes and am not able to download completely. When I had my 250gb hd in the codes were:
W 0000-0015
X 0000-F001
Y 00C2-03E0
Z 0000-0000
Now their is something on Z. Anybody know anything about this? Thanks.
Post by: thebuffman on January 29, 2004, 01:23:00 AM
| QUOTE (TigerHawk @ Jan 26 2004, 07:44 PM) |
| W: 0000-000B X: 0000-000D Y: 00A8-4800 Z: 0000-0000 Modded 1.0 Xbox, never banned, using 1.1 EEPROM W: 0000-000B X: 0000-F001 Y: 00A8-4840 Z: 0000-0000 Unmodded 1.5 Xbox PS- On Live 2.0 Network Connections is under settings |
Man all this time I thought my buddies xbox had the same eeprom as my xbox because i ghosted my hard drive to his new hard drive! It seems that you too have the same WXYZ codes LOL!
I guess the WXYZ codes are not unique to a box. The Serial # must be what is unique to the box. Anyone agree with this?
(Please see my WXYZ codes in the previous post of mine above)
Post by: IOFILE on December 14, 2002, 12:49:00 PM
Post by: wh00ps0rry on December 14, 2002, 04:13:00 PM
X: 0000 - F009
Y: 00C2 - 03C0
Z: 0000 - 0000
Whats going on here? Tech support from xbox cant help me either. They say its my modem, but i tried on my friends differnet modem and it didnt worked...anyways it did work be4 and it doesnt work now. btw, i get basiclaly the same thing if i use my router or a direct connection, that code i gave u was with my router and all automatic settings
Post by: Fuzzy on February 01, 2004, 03:50:00 PM
The Buffman, the 0088 code when you log on with the same eeprom seems very interesting. Can anyone confirm this code if the same eeprom is used on two boxes?
Post by: angone54321 on December 15, 2002, 04:26:00 AM
Now im a noobster at the hacking scene, but i would love to rape bill gates and get my modded box working. So i see all this stuff about eeproms and stuff about swapping the bad one with a fresh one. Well i have the virgin xbox just gimmie some steps on how to apply this stuff to my modded box, and i can give u guys some results on my xyz codes and stuff.
Post by: wh00ps0rry on December 15, 2002, 01:53:00 PM
Y: 00C2 - 03C0
Z: 0000 - 0000
^ this is my code and it IS confirmed, i am indeed banned. I think my code isnt showing 6's cuz i did not install the update. This is how i know, i tried my xbox at my friends house, it did not work, we switched the cables on to his, and it did work.
Post by: Fuzzy on December 15, 2002, 03:04:00 PM
Post by: wh00ps0rry on December 15, 2002, 04:31:00 PM
Post by: angone54321 on December 16, 2002, 08:32:00 AM
x: 0001 - 8005
y: 00a8 - 4800
z: 0000 - 0000
connected on a Netgear router rt314
isp = ATT Broadband chicago, iL
i also have a banned xbox modded, could someone tell me how i take the info from my working one and get it to work on the modded one. i hear everyone is flashing the eeproms and such, could someone help me out.
email: [email protected]
aol instantmessanger: IV1ario
Post by: JaY-B on December 16, 2002, 08:53:00 AM
X 0000-F001
Y 00A8-6820
Z 8015-190D
I have flashed my tsop
auto configure and connection by intranet
Post by: Fuzzy on December 16, 2002, 02:18:00 PM
Post by: Moteuchi on December 16, 2002, 05:47:00 PM
Post by: Kickace1616 on December 16, 2002, 05:54:00 PM
Post by: sala on December 20, 2002, 05:36:00 AM
X 001-8005
Y 00AB-4800
Z 0000-0000
banned and not unbanned??????? whats this the question!!!!
Post by: Ithinor on February 21, 2004, 02:42:00 PM
Anyway..."The Problem"
Im new to the whole modding thing, and have just recently modded my xbox, i tried to get on XBox Live tonite, and it couldnt connect to it, i moaned and moaned ot my self and my friends, then decided to look here to see if any1 else had the problem. Finding this Thread, and reading the first few pages, it seems i have been banned.
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z: 0000 - 0000
I then tonited a post saying it was a problem with the configmagic lock hdd. and that the lengthy process corrected this error, so i tried unlocking my HDD then locking it via THIS Tutorial.
It still has not worked, i have the same wxyz.
Could someone correct me on this? or have an easier way to fix the eeprom without buying a new one? as money is quite tight around here rite now.
Thanks in advance.
Post by: Fuzzy on February 21, 2004, 04:30:00 PM
Post by: Ithinor on February 21, 2004, 04:57:00 PM
I couldnt find the switch he spoke of, so i tried locking my hdd again.
i dont have the evox backups because evox crashes when i try to backup, it just hangs for hours and hours
Post by: Ithinor on February 21, 2004, 05:12:00 PM
I did replace my HDD with my original HDD and i still have the same problem, the codes are actually the same.
Post by: Fuzzy on February 21, 2004, 06:17:00 PM
Post by: JaY-B on December 20, 2002, 02:47:00 PM
X:0000 - F001
Y:00C2 - 03E0
Z:8015 - 1917
Can someone give me helpful information thanks
Post by: Ithinor on February 22, 2004, 01:06:00 AM
i just have the xbe's in, i left it like that as it seemed to work ok.
im using the AppleX V chip, if any of that info is helpfull.
Would buying a new eeprom still work for me?
thanks for trying to help btw, mucxh apretiated.
Post by: Ithinor on February 22, 2004, 07:33:00 AM
I had a + under the S and - under all others, after locking i then got a + under s and L i think it was, and - under all others. On original hdd i have + under S E and L and - under others, with a m at the end of it
*Update: used the switcher, just changed me to NTSC, i got Black and White screen as my TV dont support it, and i have same xyz codes :\
Post by: sala on December 20, 2002, 05:25:00 PM
Post by: Fuzzy on December 20, 2002, 05:43:00 PM
Post by: needforspeed924 on February 22, 2004, 03:53:00 PM
W:0000-000B
X: 0000-F001
Y:00C2-03E0
Z: 0000-0000
Are these messed up, is it my eeprom that needs to be replaced?
My e-mail is [email protected]
My aol instant messenger screenname is needforspeed924.
Thank you for your time.
Post by: Fuzzy on February 22, 2004, 04:51:00 PM
Shana lock it.
Post by: needforspeed924 on February 22, 2004, 05:09:00 PM
Post by: needforspeed924 on February 22, 2004, 05:23:00 PM
Post by: Ithinor on February 22, 2004, 11:13:00 PM
Post by: pontfirebird73 on February 23, 2004, 05:44:00 AM
manually entered ip address and dns (router ip)
w: 0000-000B
x: 0000-000D
y: 00A8-4800
z: 0000-0000
ip address automatic and dns manual (my router address)
w: 0000-000B
x: 0600-F009
y: 00A8-4840
z: 0000-0000
automatic ip and automatic dns
w: 0000-000B
x: 0600-F001
y: 00A8-4840
z: 0000-0000
i thought the first four of X was supposed to be all 0's
Post by: Ithinor on February 23, 2004, 07:17:00 AM
| QUOTE (Cutriss @ Feb 23 2004, 02:49 PM) | ||
It'll boot, modchip off, on both disks? I just want to be clear about this. |
Yes, mod chip off, both disks, it boots normal msdash, mod chip on, it boots evoxdash.
Post by: JaY-B on December 21, 2002, 02:31:00 AM
| QUOTE |
X:0000 - F001 Y:00C2 - 03E0 Z:8015 - 1917 Or X:001C - F023 Y:00C2 - 0380 Z:0000 - 0000 |
First one connecting by lan and nexland isb2lan
Second one direct modem connection and ppoe
But i still cannot connect to xbox live i have xbox live not found
Post by: Fuzzy on February 23, 2004, 09:28:00 AM
Post by: needforspeed924 on February 23, 2004, 10:05:00 AM
Post by: Fuzzy on December 21, 2002, 09:45:00 AM
Post by: Cutriss on February 23, 2004, 03:21:00 PM
I'm running out of ideas, but I really want to figure this one out.
If that EEPROM is currently no good to you, would you mind if I take a look at it? Could you use ConfigMagic to back it up to a file? You'll just have to trust me not to use it - As it stands, you're almost ready to buy a new one anyway.
Post by: Cutriss on February 23, 2004, 03:23:00 PM
| QUOTE (pontfirebird73 @ Feb 23 2004, 03:44 PM) |
| i thought the first four of X was supposed to be all 0's |
Not necessarily. You're fine.
Post by: Fuzzy on February 23, 2004, 04:32:00 PM
Post by: needforspeed924 on February 23, 2004, 04:43:00 PM
Post by: Ithinor on February 24, 2004, 07:27:00 AM
I'll be buying a new XBox if i cant figure this out, not a new EEPROM. I have a legit box then i can use for live. also gives me a backup incase i go slightly wrong :\
Post by: cyrus968 on December 22, 2002, 05:09:00 PM
automatic settings, matrix mode 3, original HDD, ran XBL test under disabled mod chip:
X: 0000-F001
Y: 00A8-4840
Z: 0000-0000
automatic settings, matrix mode 3, UPGRADED 80GB HDD, ran XBL test under disabled mod chip
X:0000-F001
Y:00A8-4860
Z:8015-1919
after upgraded locked 80GB hdd, xbox live still ran and my retail games are still able to go onto XBL. my XBOX is not banned so far
Post by: mrRobinson on February 29, 2004, 05:31:00 AM
Post by: tracy2420 on February 29, 2004, 07:02:00 AM
Post by: Fuzzy on February 29, 2004, 05:15:00 PM
| QUOTE (ChrisAsh @ Feb 29 2004, 09:17 AM) |
| Just installed a new 120GB HDD, installed EvoX and all the apps on it and went to recover my XBox Live account. It says "Xbox Live Not Found". here are my codes: 1.00.5335.01 W: 0000 - 000B X: 0000 - F001 Y: 00C2 - 03E0 Z: 0000 - 0000 Am I banned? |
Read the 00C2 section by Cutriss in the first post.
Post by: Piasecznik on March 02, 2004, 08:24:00 AM
Do anyone know if EEPROM.BIN from version 1.0 would work with my 1.2 (green limited edition) ?
Same region and TV system.
Post by: gamefreakgcb on March 05, 2004, 05:28:00 PM
just want to know if these numbers mean i'm banned
Post by: Fuzzy on March 05, 2004, 06:42:00 PM
Post by: Fuzzy on March 06, 2004, 09:13:00 AM
| QUOTE (Cutriss @ Mar 6 2004, 10:50 AM) | ||
Well, in all fairness to him, the XYZ thread was on Page 2, and he posted a new thread, which Shanafan merged into this one about two minutes before I posted. Of course, that doesn't preclude the possibility of Searching, but whatever... |
I see, my fault...
Post by: rewen on December 24, 2002, 10:39:00 PM
X: 0000 - F001
Y: 00C2 - 01A4 (seems unique to most of the posts so far)
Z: AFFF - 0018 (also seems unique)
-All auto settings, never changed the MAC addy or eeprom
-Xbox never had the starter kit plugged it, ever
-evox 2.5 (ybox, custom error codes, no flubber, blue logo) flashed TSOP
-80gb unlocked maxtor
Connected first 8 or so tries thru D-Link 713P router
Latest tries xbox was networked thru a WET11 which is wirelessly networked with the D-Link 713P...
xbox live no found one the fourth connection test thing - I think it's b/c the hardware isn't in the memory card slot...
tried probably 10 times, first try was the day unreal champ beta came out (months ago?), like I said above, I've never hooked up my starter kit (I want to be able to return if there is no hope for me).
So... I hope this helps you guys.
Once I find out how to put a switch on my spare evox 2.6 aladdin mod (http://www.qualitymo...din/aladdin.jpg) I am going to lock the HDD, flash the original 4034 bios on to my tsop, then install the aladdin plus switch (from then on I guess it's evox on CDRW... :-/ ). All just to play my ONLY retail game, Mechassault, with my new xbl starter pack which I got for xmas (with mechassault
)
Post by: xbox_freedom on December 25, 2002, 10:42:00 AM
X: 0000-000D
Y: 0088-1C00
Z: 0000-0000
it says everything is fine ip configured, dns confidured, no probs but recently it hasnt been working please help
[UPDATE]
added new dns ip numbers into winproxy (serached for ntlworld.com on whois to get them) now it connected
i have a v1.0 xbox brought in march 2002 official launch date! got xbox live 1 week ago here are my new details:
1.00.4290.01
X: 0000-000D
Y: 00A8-4800
Z: 0000-0000
UL: 137Kb DL:643Kb
L: 167ms P: 8/10
Post by: xboxr on December 25, 2002, 11:10:00 AM
UPDATE: So, it's a setup issue. That would be much better than the alternative...
Post by: sala on December 25, 2002, 04:58:00 PM
Y 00C2-0184
Z AFFF-0018
with this code i can t connect to xboite live! whats this the problem?
Post by: rewen on December 25, 2002, 06:16:00 PM
X: 0000 - F001
Y: 00A8 - 4860
Z: 8015 - 1917
I can connect, but it rejects my subscription code
Post by: mark986 on December 25, 2002, 09:05:00 PM
Post by: Fuzzy on December 25, 2002, 09:19:00 PM
Post by: Fuzzy on March 20, 2004, 05:31:00 PM
Post by: addyb on March 21, 2004, 10:35:00 AM
I set up live yesterfay and registered my mac address with my ISP and got online fine,,,, today i noticed it didnt connect so i checked my settings and i had to manually enter my ip and dns again etc.. no problem but then i noticed it was a different MAC address listed for my xbox??? so again i rang up telewest and re-registered this new mac address. Still dns failure on the connect screen.
My code with the Y button press is as follows?
Oh BTW i havent tried to go on live with chip on. dont think noone else as, as im the only one that goes on.
X: 0000 - 002D
Y:008C- 0000
Z: 000-274C
Post by: Cutriss on March 30, 2004, 03:48:00 PM
| QUOTE |
| I had same problem but i FIXED it like this: I ran my avalaunch and looked at my Hardware settings. It said i had PAL-1 or PAL-I whatever and behind it said: WEIRD So i thought let's use the Enigmah PAL-NTSC switcher, so i did and select PAL, rebooted again and checked hardware again. The WEIRD word was gone so i turned off modchip, rebooted and voila i was able to connect again to the XBOX live. Dont know what went wrong but its working again |
Post by: pmpr13 on March 30, 2004, 04:57:00 PM
Also if this can be fixed without losing all the stuff on my xbox and not having to open my xbox and putting my hardrive in my PC relocking and erasing it, it woud be appreciated.
Post by: Fuzzy on March 30, 2004, 04:59:00 PM
| QUOTE (pmpr13 @ Mar 30 2004, 08:57 PM) |
| Hey Cutriss i dont know if the above response was ment for me but i already tried switching from pal to ntsc my box is ntsc. Also my numbers didnt change. Also if this can be fixed without losing all the stuff on my xbox and not having to open my xbox and putting my hardrive in my PC relocking and erasing it, it woud be appreciated. |
Well getting a new eeprom will fix it (99.9%) but then again, you have to get a new eeprom and your taking away from the already shrinking eeprom community.
Post by: Fuzzy on March 31, 2004, 10:30:00 AM
| QUOTE (pmpr13 @ Mar 30 2004, 09:15 PM) |
| Well I need a couple of eeproms anyway because i have been reparing xboxes and reselling them, plus I have one from a friend already as well so dotn worry im not depleteing them for no reason. In terms of fixing this with an eeprom should i just backup what i have and then flash this new one. Is it acceptable to use config magic to do this or do i need to use another program, i woudl be using config magic to unlock the harddrive build the new eprom load the eprom and then relock the hard drive. The xbox in question is version 1.0 |
Well as long as the eeproms wouldn't be used anyway. It's really up to you whether you do it or not. Config magic for everything should be fine.
Post by: HyperFx on December 30, 2002, 02:33:00 PM
at X Position i have not 4 zeros!
1.00.4920.01
X:001C-F003
Y:00C2-0002
Z:0000-0000
My XBox is banned. I live in Germany
My Configuration:
Xbox V1.0
PC-Bioxx V5 (Xbox live ready)
Samsung 120 Gig locked
I have changed my XBox Serial Number with Config Magic with a serial i get from a new Xbox
Post by: jayman16 on April 03, 2004, 09:48:00 AM
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 6820
Z: 8015 - 190D
I have an unbanned EEPROM, can all the work be done in switching it to the banned xbox with Configmagic Final???
Post by: Fuzzy on April 04, 2004, 01:18:00 PM
| QUOTE (jayman16 @ Apr 3 2004, 01:48 PM) |
| I've got a Xbox version 1.0 with a X2.3b pro chip installed, and a 120 gb HDD. I got banned from live yesterday. W: 0000 - 000B X: 0000 - F001 Y: 00A8 - 6820 Z: 8015 - 190D I have an unbanned EEPROM, can all the work be done in switching it to the banned xbox with Configmagic Final??? |
Yes
Post by: jayman16 on April 04, 2004, 05:06:00 PM
Post by: Fuzzy on April 04, 2004, 05:51:00 PM
Post by: thenewone on April 13, 2004, 04:45:00 AM
same as b4 but with original hd
w 0000-000b
x 0000-f001
y 008a-0fe0
z afff-0018
when i try to go online i get network error message
Post by: Jblo on April 13, 2004, 07:23:00 AM
W: 0000-000B
X: 0000-F001
Y: 00A8- 4860
Z: 0000-0000
UL-225kb DL- 391kb
P:20 / 25
Is this a decent one or not , can anyone tell me please.
Post by: Fuzzy on January 01, 2003, 10:50:00 AM
Changing your XYZ Codes will do nothing. The XYZ codes are codes that deliver information about your system in data format. They do not relate to anything about being banned, they only tell you if you are or will be banned. People dont understand. CHANGING YOUR XYZ CODES WILL NOT UNBAN YOU EVEN IF YOU FIGURED OUT HOW i hope this helpes opjose and undead answer all the posts about people wanting to change their xyz codes.
Could someone please post a news tidbit about this? its important.
Post by: Fuzzy on April 14, 2004, 04:59:00 PM
thenewone Yea you are banned. That other code occured because you apparently missed a step with eeprom involvement while switching back to the old hard drive causing those codes.
hugob honestly, I have no idea what the hell is going on with that.
Post by: Fuzzy on April 15, 2004, 09:11:00 AM
Post by: CybrJnkie on January 01, 2003, 07:10:00 PM
Post by: Kira Yamoto on April 19, 2004, 02:14:00 PM
X =0000-F001
Y =00C2-01A4
Z =AFFF-0018
i read somewhere in this thread that a part of this code, Z maybe? that my HDD key is messed up. I used config magic to unlock and lock always so how would i be able to fix this problem? i used a new EEPROM and never been able to go back on XBlive since. BTW im using a replacement HD, my 8gig is hosed since the EEPROM backup (banned one) is on there but didnt unlock before the EEPROM replacement.
Post by: BrandonV on April 21, 2004, 03:18:00 PM
My codes are:
W: 0000-000B
X: 0000-F001
Y: 0088-1C60
z: 0000-0000
UL:0kb Dl: 0kb
I am in the US and using an NTSC xbox. I have been on Live with my modded xbox and 160GB HDD (X2.3B Pro was definately off every time) with no problems ever until today. I have used Enigmah video switcher in order to get Prince of Persia working a while ago (since the last time I went Live)so that could be an issue, it reported that my xbox was PAL so I switched it to NTSC.
This is a very confusing issue (for me at least), can anyone tell by my codes if I'm banned?
Post by: BrandonV on April 22, 2004, 06:47:00 AM
| QUOTE (hugob @ Apr 22 2004, 01:42 AM) |
| 2 BrandonV -> I have a very strong feeling you can get back online later this day... MS is updating Live for the last 24 hours so I guess that is your problem. See This Thread for more info. |
Thanks man! I'm sure you're right, I failed to read that thread.
Hopefully it works when I get home tonight, I'd hate to have wasted part of the day yesterday adding a switch and my stock HDD only to be banned from Live.
Post by: Fuzzy on April 23, 2004, 07:07:00 PM
Post by: Zodiiak on April 25, 2004, 09:22:00 AM
| QUOTE (Fuzzy @ Apr 23 2004, 11:07 PM) |
| I just saw a really weird screen shot of what should be the XYZ menu. When I get a chance, I'll confirm its validity. If what I saw was real and what I thought it was, all this work may have to be done again. |
Damn, that sucks
Hopefully you're still updating your initial post with all the latest news, it really helps to keep people posted
Post by: Fuzzy on May 10, 2004, 03:43:00 PM
| QUOTE (g4zz4 @ May 10 2004, 03:00 PM) |
| Being impatient and not treading carefully with my xbox I seem to have tried logging into live by pressing the wrong option on the evox screen. I'm a total jackass I know, I had about 7 months left on live too Anyway, just to let everyone else know if they're in the same boat as me, my xyz values are as follows x - 0000 - F001 y - 00AB - 6840 z - 8015 - 190D I believe the 2nd y code shouldn't start with a 6 so I am indeed banned. I will now take donations from people wishing to purchase a new xbox & live account for me |
Yup you're banned. You don't have to get a new box and account. First of all it bans your xbox not your account, second you could just get a new eeprom...but what do I think? I think you should just get another Xbox. Almost everyone on this forum has AT LEAST 2 Xboxes now anyway. It's a sound investment, especially if you pick up that new Halo box (like me) a panzer dragoon orta box (off ebay...man those things are tight) or some other special edition. You won't regret it.
Post by: RichardK on January 06, 2003, 02:40:00 PM
| QUOTE (Fuzzy @ Nov 27 2002, 04:08 AM) |
| This is a re-post of my discoveries as a seperate topic. Ok, ive looked through a lot and here's how its working. X. First of all, the first four numbers of x should always be zeros. They SHOULD always but I haven't seen one that isn't (if yours isn't contact me.) Y. 00A8 seems to be common among banned and not banned boxes. Now here is where the problem is. Apparently 6860 indicates an LPC mod that is enabled or a non switched non-LPC mod enabled. 6820 means that the system had once had a modchip in it but at the moment is not running. Other wise it should be something like 4840 or 4820. Z. The last row (a.k.a Z) has to do with packets and trashed responses. The first 4 numbers deal with response on whether is banned, will be banned, or is not banned. It looks like 8015 is banned/to be banned and 0015 is already banned but depending on type of chip you have you may never get this number (LPC or other). The last 4 numbers are a combo. The first two (19 generally) have to do with which live region your in (dont ask) the second two have to do with packet receiving. D is no packets, C is two packets one trashed, 17 is trashed but readable packet. 0000 is any amount of none trashed packets. A good code should look something like this: X: 0000-F021 Y: 00A8-4840 Z: 0000-0000 This is what I have deciphered and I believe it is 99.9% correct. I hope it is of some use to Zander, Opjose, Undead, Or someone. Thanks for your time |
guys guys is this the Subscription Code for xbox live? if so i am in the uk and my xbox's settings are on automatic. PLEASE TELL ME A Subscription Code For Xbox live!!! MY XBOX ISNT MODDED!!!
Post by: HeLiuM on January 06, 2003, 03:24:00 PM
neway.. these r codes given by the xbox for customer support that reflect the status of your box. they rnt subscription codes and other peoples codes will do you no good whatsoever.
Post by: RichardK on January 06, 2003, 04:29:00 PM
Post by: Lee_5 on May 21, 2004, 09:49:00 PM
Xbox w/ Jan 2004 manufacturing date (should be 1.5)
Xectuer 2.3b Lite+
Maxtor 120G 6Y120P0 (Locked with ConfigMagic)
Set up with NewHD1.4 cd
Connecting to Xbox Live! with following network setup:
Road Runner cable internet ran to nVidia ethernet built into motherboard
Xbox is hooked to 3Comm ethernet built into motherboard
Internet Connection Sharing turned on in Windows XP Pro
I've never been connected to Xbox Live! before, and haven't set up an account yet. The first 3 tests run fine, but the last one fails and I get "Xbox Live! not found" error. Here are my codes:
W: 0000-000B
X: 0001-8005
Y: 00C2-0002
Z: 0000-0000
First of all, from your initial post, it seems that the "00C2" code at the beginning of the Y line is from either a hardware mismatch, eeprom update, or PAL<-->NTSC switch. I obviously have change hardware since I put a different HD in.....I did try changing the eeprom using ConfigMagic.....but I have never tried changing from PAL to NTSC.
Can anyone please explain how to get the eeprom from a factory fresh Xbox, and the proper procedures to update the modded Xbox with that eeprom. What I'm wondering is, if I go through the steps of replacing my eeprom with an original from a "non-modded" Xbox, won't it figure out that there is a hardware change once on my modded Xbox, and my Y code will go back to 00C2 (which is what seems to be stopping people from connecting to Xbox Live!, even though they don't have the 6XXX line, indicating they've been banned).
Post by: Lee_5 on May 23, 2004, 12:01:00 PM
Post by: Jinnai on May 29, 2004, 08:09:00 AM
W: 0000-000B
X: 0000-F001
Y: 00C2-01E4
Z: AFFF-0018
Post by: InsertNewSn on May 30, 2004, 06:13:00 AM
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
I tried looking at the other topics about the XYZ codes and I can't make any sense of it...could someone pleeeeeeeeease try to translate these codes for me? I'm getting the "Xbox Live could not be found error" even though I'm 100% sure that my modchip has been turned off each time I wish to get on xbox live...maybe an xbox live game phoning home?..
Post by: xman954 on May 30, 2004, 04:19:00 PM
it did a UPDATE to my dash on XBOX1, I don't see any difference but all files
execpt audio and font folder files have changed to todays date.
I am going to do a file compare with XBOX2 which has not got this updat yet
There is sure a lot of zero's does anybody have any coments?
1.00.5971.01
W 0000 - 000B
X 0000 - F001
Y 00A8 - 4860
Z 0000 - 0000
L: 123ms (124ms) P: 20 / 20
after selecting OK i get this
1.00.5971.01
MT:1 (0015 - 00F0)
IC:1 (0015 - 00F0)
NT:1
Post by: mckenn88 on June 19, 2004, 08:31:00 PM
| QUOTE (xman954 @ May 31 2004, 01:19 AM) |
| 1.00.5971.01 W 0000 - 000B X 0000 - F001 Y 00A8 - 4860 Z 0000 - 0000 L: 123ms (124ms) P: 20 / 20 after selecting OK i get this 1.00.5971.01 MT:1 (0015 - 00F0) IC:1 (0015 - 00F0) NT:1 |
i just updated mine today and i got the exact same thing. im kinda dissappointed tho. the only reason i updated was so i could see my upload and download but it didnt have it on there. where elsa can i find it
Post by: HenkeE on June 29, 2004, 06:05:00 AM
My XYZ code is:
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z: 0000 - 0000
If I change the mac address to the same as the network settings in Configmagic (yeah different mac address in network settings and config magic) I get Y: 00C2 - 0062 instead (the rest are the same). Region changes in config magic doesnt change anything in the XYZ codes.
Looked at the hddinfo file and on my old 80gig HDD which I have played live on I have one HDD Key one HDDLockDisablePassword and one XboxHDKey. Now when I have the 160gig HDD I have a new HDD Key and HDDLockDisablePassword but the same XboxHDKey...
Video & XBE Region was set to PAL, Region 4 and DVD KIT ZONE to 0. Havn't change these and was the same on my old eeprom.. tested to put both to same region but didn't do anything to my problem or the XYZ codes.
So have to fix my HDD the "longway" This way I guess, but is there a way to just lock it without erasing the whole disk? Have quite much data so not so fun to backup that first. So just the lock thing? Doable?
Post by: RiceCake on July 03, 2004, 08:18:00 PM
| QUOTE (Fuzzy @ Dec 7 2003, 03:05 PM) |
| Oops, went back and i missed that and sorry, curtiss cutriss...very similar, fixing and fixing. |
Funny, you guys kinda lost the fact that I said this a loooooong time ago...
Its based on what network the XBox is running on, Full Duplex, Half Duplex, 100Mbps, or 10Mbps...
I can remember when the W codes first came out I posted 'em and figured this out. You guys thought it had to do with router settings, or MAC addressing, although I said that the highspeed switch backbone of my house is running a much more bitchin' speed than my friends cable modem - and its what made the difference.
Post by: RiceCake on July 04, 2004, 07:24:00 AM
Post by: InsertNewSn on July 07, 2004, 11:14:00 AM
Post by: bengu on July 07, 2004, 12:19:00 PM
Post by: bengu on July 10, 2004, 06:28:00 AM
Post by: mcq3000 on July 12, 2004, 05:59:00 AM
Post by: rAph on January 14, 2003, 06:24:00 AM
| QUOTE |
| Z. The last row (a.k.a Z) has to do with packets and trashed responses. The first 4 numbers deal with response on whether is banned, will be banned, or is not banned. It looks like 8015 is banned/to be banned and 0015 is already banned but depending on type of chip you have you may never get this number (LPC or other). The last 4 numbers are a combo. The first two (19 generally) have to do with which live region your in (dont ask) the second two have to do with packet receiving. D is no packets, C is two packets one trashed, 17 is trashed but readable packet. 0000 is any amount of none trashed packets |
my xyz codes are:
x: 0000-f001
y: 00a8-4860
z: 8015-1917
I do not have a modchip in the system, and never have. But I still get 8015 as a Z code.
What does the P field mean? Mine is p: 8/10
Post by: thesammah on July 15, 2004, 12:02:00 PM
Post by: revengeismyfury on July 16, 2004, 03:08:00 PM
Just Go there sorry for the first 2 post on the second page. that is really long sentences .my last 2 on page 3 are clearer, but by doing what i said there, any of you that are using your xbox live. on your upgraded hdd, that just wolnt connect, check at that site.
Post by: revengeismyfury on July 16, 2004, 03:10:00 PM
Post by: revengeismyfury on July 16, 2004, 03:12:00 PM
Post by: Fuzzy on January 14, 2003, 06:02:00 PM
| QUOTE (rAph @ Jan 14 2003, 01:24 PM) | ||
my xyz codes are: x: 0000-f001 y: 00a8-4860 z: 8015-1917 I do not have a modchip in the system, and never have. But I still get 8015 as a Z code. What does the P field mean? Mine is p: 8/10 |
People dont realize a lot has been updated since those first posts. The P is ping that 8/10 means your sending 10 packets and recieving 8 back.
Post by: Svenne on July 16, 2004, 09:01:00 PM
well he must have turned the xbox on with the modchip ON by pressing too long cuz now i have a fucked up msg saying the hardware modified thingie so i read this thread and i noticed the reply from someone saying that if the second Y code starts with a 6 then your banned almost for sure
so what i did was checking those codes, posting here now so someone can verify this that i'm kinda screwed atm W: 0000 - 000B
X: 0000 - 000D
Y: 00A8 - 6800
Z: 8015 - 190D
so anyone got some advice or can i just forget live
big thnx in advance
Greetz Svenne
Post by: bearauto on January 14, 2003, 07:16:00 PM
| QUOTE |
| People dont realize a lot has been updated since those first posts. |
OK, so what does my XYZ code tell ya:
X: 0000 - F001
Y: 00A8 - 4840
Z: 0000 - 0000
Thanks!
Post by: Fuzzy on January 14, 2003, 07:18:00 PM
| QUOTE (bearauto @ Jan 15 2003, 02:16 AM) | ||
OK, so what does my XYZ code tell ya: X: 0000 - F001 Y: 00A8 - 4840 Z: 0000 - 0000 Thanks! |
your xbox seems to be fine but something seems missing
Post by: simongwynne on July 17, 2004, 12:19:00 PM
W 0000 - 000B
X 0000 - F001
Y 00C2 - 03E0
Z 0000 - 0000
Whem I attempt account recovery, it gives me the xbox live not found error and tells me to check my router etc. Any hints would be much appreciated.
Si.
Post by: bearauto on January 14, 2003, 07:50:00 PM
| QUOTE (Fuzzy @ Jan 14 2003, 06:18 PM) | ||||
your xbox seems to be fine but something seems missing |
HUH?
Post by: bearauto on January 14, 2003, 08:21:00 PM
Post by: revengeismyfury on July 17, 2004, 09:42:00 PM
Post by: stark on January 15, 2003, 07:45:00 AM
X: 0001 - 8005
Y: 00A8 - 6800
Z: 8015 - 190D
Now what does this mean for me?
Post by: stark on January 15, 2003, 07:46:00 AM
Post by: bearauto on January 15, 2003, 08:36:00 AM
| QUOTE (stark @ Jan 15 2003, 06:45 AM) |
| I just recently got "Xbox Live Not Found", and my xyz are.... X: 0001 - 8005 Y: 00A8 - 6800 Z: 8015 - 190D Now what does this mean for me? |
Woah...at least all my connections tests pass...
Post by: stark on January 15, 2003, 08:37:00 AM
My connection does pass, just not the XBOX LIVE TEST.
Post by: bearauto on January 15, 2003, 09:10:00 AM
| QUOTE (stark @ Jan 15 2003, 07:37 AM) |
| What? My connection does pass, just not the XBOX LIVE TEST. |
the Xbox LIVE test is one portion of the connection test. It's the LAST and most IMPORTANT part of the connection test. I thought that if you fail the last part, you're a goner.
Post by: stark on January 15, 2003, 09:13:00 AM
my hopes are turned now to a new eeprom.
Post by: Cergorach on January 15, 2003, 10:08:00 AM
- Has anybody tried to monitor trafic from the X-Box to the Live server?
- Is that data encrypted and if so, to what extend?
- If it is posible to check for data that indicates wheter or not the X-Box carries a ModChip then it would be possible to change the data send so that it regsters with the Live server as an unmodified X-Box.
- How does the Live server check for a ModChip and what other 'requirements' are there for being banned?
If people succeed in changing the X-Box SN with 'random' codes that do not get banned, other people will suffer that didn't do anything wrong and someday the codes will run out, not good! We would need to find out how MS determines wheter a X-Box is modied or not and then find a way so that the X-Box doesn't send the dammening signal or a way to send a 'save' signal...
Post by: Fuzzy on January 15, 2003, 01:41:00 PM
Now for cergorachs questions
-yes
-yes, i dunno ask shanafan
-most likely
-they check the BIOS if you are running ms bios your fine. You also need your hd locked.
Post by: stark on January 15, 2003, 01:52:00 PM
Post by: Cergorach on January 15, 2003, 02:14:00 PM
| QUOTE (Fuzzy @ Jan 15 2003, 09:41 PM) |
| Now for cergorachs questions -yes -yes, i dunno ask shanafan -most likely -they check the BIOS if you are running ms bios your fine. You also need your hd locked. |
Is there any (more) info on how they check the bios and wheter it's a MS bios? I'm probably asking something that has been covered before, but as i see it, it is either fooling MS from the start (with the bios) or running the risk of blowing your regcode and get banned...
Post by: bearauto on January 15, 2003, 02:38:00 PM
Post by: Fuzzy on January 15, 2003, 03:15:00 PM
| QUOTE (Cergorach @ Jan 15 2003, 09:14 PM) | ||
Is there any (more) info on how they check the bios and wheter it's a MS bios? I'm probably asking something that has been covered before, but as i see it, it is either fooling MS from the start (with the bios) or running the risk of blowing your regcode and get banned... |
they check the ram for which bios was booted.
(and for beaurato no man i was just saying that your xbox is fine)
Post by: bearauto on January 15, 2003, 03:40:00 PM
| QUOTE (Fuzzy @ Jan 15 2003, 02:15 PM) | ||||
they check the ram for which bios was booted. (and for beaurato no man i was just saying that your xbox is fine) |
Hehe, ok thanks for clearing that up...was a bit alarming to read.
Post by: BlackCloud2590 on August 01, 2004, 07:23:00 PM
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z: 0000 - 0000
Post by: xman954 on August 01, 2004, 07:54:00 PM
don't think your baned, but config error
You do *not* need to replace your EEPROM because of a C1/C2/C3/8A error.
And the moral of the story? Quit mucking around with your region settings.
Post by: BlackCloud2590 on August 02, 2004, 11:13:00 AM
Post by: doomraider on August 03, 2004, 03:24:00 AM
Post by: flagg5889 on January 20, 2003, 08:39:00 AM
| QUOTE (Cergorach @ Jan 15 2003, 06:08 PM) |
| ... If people succeed in changing the X-Box SN with 'random' codes that do not get banned, other people will suffer that didn't do anything wrong and someday the codes will run out, not good! We would need to find out how MS determines wheter a X-Box is modied or not and then find a way so that the X-Box doesn't send the dammening signal or a way to send a 'save' signal... |
Actually, that's not true. If that were to happen, then MS would have to unban everyone as they would not be able to trace which ones were legitamate bans and which ones were a result of the randomization technique. THis would be good - legit users would soon be unbanned because of all the service complaints.
Post by: SuperWade2 on August 11, 2004, 10:32:00 PM
Y : 00C2-0380
Z :0000-0000
Have been unable to access Live via Retail Kernal TSOP since upgrading HD... I used Xenium Ice Xos2 HD Upgrade Tool and EVOX FTP format of E:\.
I did not back up my Live Info prior to upgrade...
Have Tried Enigmah Video Mode Select CD to go from NTSC to PAL back to NTSC, with no luck...
Any clues?
SW2
Post by: billyciam on August 12, 2004, 02:36:00 PM
0000 000b
0000 f0001
00c2 01e4
afff 0018
i understand this is an error with my eeprom config but what i dont understand is the steps to fix it without getting new eeprom?
Post by: irajames1176 on August 19, 2004, 07:17:00 PM
W: 0000-0013
X: 0000-000D
Y: 00A8-4800
Z: 0000-0000
about to try out Live! myself and figured i'd post my codes
Post by: yield on August 27, 2004, 02:14:00 PM
Post by: xrthawk on September 19, 2004, 07:41:00 PM
1.00.5659.03
W: 0000-000B
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
Does anyone know if I'm banned?
Post by: Acid90 on September 20, 2004, 03:03:00 PM
AS ive just turned onto XBOX LIVE with my chip was turned off , but i have a larger hard disk drive installed ,
my codes are now -
with auto IP settings:
X: 0000 - F001
Y: 00A8 - 6840
Z: 8015 - 190D
and ips and dns light up (green) ok , but Xbox live (red) is no longer found
and up pops the screen i have a modded XBOX, so i think XB Live are banning boxies which are found to be abnormal ie diffrent drives installed
So i take it the above code does infact mean im banned
Post by: Acid90 on September 21, 2004, 12:54:00 AM
i have now put i 8gb xbox hard drive back in (see above) and i get these codes
x 0000 f001
y 00c2 03c0
z 0000 0000
any ideas what this means ???????
***please note both the above codes are the same as - Dools (on page 4)
except for one thing my ooc2 code appears when i use my 8gb and the 00A8-6840
code appears when i use my 40gb ??? anyone work that out
BTW. my xbox is from the first batch from when the uk xbox's first launched
Post by: Nikon8831 on September 21, 2004, 10:45:00 PM
W:0000-000B
X:0000-F001
Y:008A-0FE0
Z:AFFF-0018
no luck in connecting to xbox live, I have xbox v1.0, XChip, evolutionX xchip bios V1.1, EvolutionX-3935
Does anyone know how i could fix this, and/or where is "Enigmah PAL-NTSC switcher"?????, i cant find it on xbins, Thanks
Post by: buddha_red on October 01, 2004, 08:21:00 AM
i looked up my numbers and im not getting anything useful
w 0000 000b
x 0000 000d
y 00c2 0380
z 0000 0000
l 0ms p 0/0
this info seems to tell me im not connecting, but if i use avalaunch and update the software it connects just fine.
im totally lost here. xbox live just says network not found. cannot connect
any tips? im cool with it if i just cant connect to xbox live, but all of the sudden i cant connect via ftp. I have ran auto install, rebooted my rouiter, checked the lights on the xbox nic.
thanks everyone, this forum rules because of people like you. If i just missed a post, send me the link and i will read for myself ( lazy readers shouldnt mod xboxes)
Buddha_Red
Post by: LukeMan UK on October 01, 2004, 02:33:00 PM
Thank god you exist i just read this and my xbox was fixed cus of your suggestions i salute you !
Post by: Ibleedslvrnblk on October 01, 2004, 06:07:00 PM
Post by: Al_Ghazi on October 02, 2004, 09:02:00 AM
I have the same XYZ codes as Nikon (Above) they are:
W:0000-000B
X:0000-F001
Y:008A-0FE0
Z:AFFF-0018
I have a xbox that is so modded it is not recognisable any more. Bu i want to know if the Enigmah Switcher trick actually works. Can anyone let me know if they have solved this annoying problem? Judging from the numbers and the other posts in here I am not banned.
I was so frustrated I actually called MS Tech Support - They walked through the numbers with me but then thay asked me to read the serial num ber on the bottom of the box. i hung up - none of my goddamn numbers match. Funny that their first reaction was to compare the serial number on the bottom of the box with the serial number on the EEPROM.
Thought? Suggestions?
Ghaz
Post by: Ibleedslvrnblk on October 02, 2004, 12:37:00 PM
Post by: Al_Ghazi on October 02, 2004, 10:25:00 PM
Ghaz
Post by: Al_Ghazi on October 04, 2004, 10:41:00 AM
I freaked around with this damn problem for days. let me tell everyone what to do - give 5 bucks to Zodiiak and get a New EEPROm - it takes 5 mins to install and all your problems go away.
Zodiiak had my EEPROM to me in less than an hour. Highly recomended. Go to the buy and sell forum.
Ghaz
Post by: DaFederal on October 04, 2004, 11:30:00 AM
I'm not sure if this is old news and it was something that I should have known, but i was and still am a little clueless about live. I don't own a subscription card and really only wanted to try to connect to live to update my dashboard for fable. To play fable in 480p you need the latest dashboard to force the Xbox into 480p before inserting the disc.
Turns out i didn't need to connect to live, all i need to do was use the live function on fable and it would update my bios that way without needed to connect. Just for kicks i decided to give live a try again, and....
IT WORKS!
Guess I just needed a newer or the newest dash board to get rid of my problem.
Now my xyz is as follows.
X 0000-000D
Y 00A8-4800
Z 0000-0000
Side note: if you read my previous post, you saw that i was getting two different codes, one when connecting through ISA Server and one connecting it straight to the modem. This lead me to believe I was setting up ISA Server incorrectly, but I guess thats not the case because it works fine through ISA. Im still unsure of why I get different codes.
DaFederal
Post by: Lycean on October 19, 2004, 05:53:00 AM
W: 0000-000B
X: 0000-000D
Y: 0088-1C00
Z: 0000-0000
MT: 1
IC: 1
NT: 0
I have an 80GB drive in my XBox which I set up ages ago via my Xenium. The EEPROM hasn't been modified, but I did just update the Xenium OS to 2.0.1 and backup the EEPROM, so who knows.
Things that didn't help:
* Deleting the contents of the E:\CACHE folder
* Deleting all non-standard files/folders from C: and E:
* Fiddling with the EEPROM in the Xenium OS
Finally ran the Enigmah PAL-NTSC selector, picked NTSC & restarted (to check that it was doing something), then reset to PAL and XBL come up immediately.
The W, X, Z, MT and IC codes are identical except that Y now reads 00A8-4800, and NT reads 3 (Strict NAT).
In the interests of completeness I should mention that I also switched BIOSes from Xecuter 2 4979.06 to 4981.06, and didn't test that change independently, but since that shouldn't have anything to do with anything when booting the retail BIOS it looks like the Enigmah selector is what fixed it.
L
Post by: Bohefus on October 19, 2004, 08:53:00 PM
W: 0000 - 000B
X : 0000 - F001
Y : 00A8 - 6860
Z : 8015 - 190D
L : 0 ms (0 ms) P: 0 / 0
original harddrive
Avalaunch
banned twice within the past week
Post by: Penfoldian on October 20, 2004, 10:17:00 AM
erm my original reason for coming here was to ask does the X Y Z correspond to the Drives X: Y: Z: on the hard drive.
Post by: >lys< on October 20, 2004, 01:24:00 PM
| QUOTE (Penfoldian @ Oct 20 2004, 06:20 PM) |
| its got to be that damn avalaunch!! erm my original reason for coming here was to ask does the X Y Z correspond to the Drives X: Y: Z: on the hard drive. |
Where do you get off trying to blame everything on Avalaunch?
Take a couple of steps back, look at the facts and do a little rethink please. Avalaunch does not in ANY way alter anything in your EEPROM unless you explicitly tell it to. It does not report anything to MS. It does not do ANYTHING that might get you banned from XBL.
The only way Avalaunch can have anything to do with MS banning people is if they check for specific Avalaunch files/file cache on your hard disk. And if they do, they will most definately be looking for EvoX, UnleashX, MXM etc files too.
Please stop spreading unfounded rumours.
Post by: deacon187 on October 24, 2004, 03:04:00 AM
W- 000-0015
X- 0000-F001
Y- 0048-4860
Z- 0000-0000
L: 77ms(80ms)
P: 20-20
MT: 1(0015-00F0)
IC: ^^^^^^^^^
NT: 1
looked through a few pages and all seems fine, just some recent posts about being banned changing epprom - changing HDD - and changing both
i thought i might get a different code or something for upgrading my HDD
but all seems fine and i never went online with chip turned on
Post by: Xboxler on October 28, 2004, 11:21:00 PM
The first had a 20GB-HDD and LPC2.0-Chip. On Live, the chip was never "on".
The second has a 80GB-HDD with SmartXX V2-Chip. I was live only with the original bios and a locked hardrive. Banned again. I don't know what else I should do.
The good is: the second box is just one week old. So i could return the box to my dealer.
Post by: orca94 on October 28, 2004, 11:21:00 PM
Sorry to bother everyone. I got a new EEPROM because I was having the OOC2 problem (which I realize is not necesary, however my technical expertise is limited and I really didn't understand the fix). However, when I got a new EEPROM and updated the xbox with it, I'm still getting the 00C2 error when trying to connect to xbox live. Can anyone give me any hints?
Thanks
Post by: Xboxler on October 29, 2004, 07:51:00 AM
W- 0000-0015
X- 0000-000D
Y- 00A8-6800
Z- 8015-190D
I am banned?
Post by: shank69xo on October 29, 2004, 04:29:00 PM
Net Settings Auto
Mod Disabled
200Gb HDD
USA
x:0000-000b
y:00a8-6860
z:8015-190D
I have been banned for the second time this week. And I have never been banned before. I have used XBL for over a year, with this same HDD. I recently switched from the Xenium ICE to an x3. The X3 was supposed to be blocking XBL, I double checked the settings before disabling the mod. Well as you can all see by my codes, 6860, from what I understand, indicates LPC mod detected and enabled. Well if thats the case, then the X3 Config Live must have a bug, which I have found no other info to back up my theory. So I really dont know what Im gonna do. Gonna try a few other things. I will post back with details.
Post by: StarmanUK on February 05, 2003, 08:01:00 AM
X: C000 - 4003
Y: 0000 - 0000
Z: 0000 - 0000
Tho im having trouble connecting atm due to what I think is a problem with my ISP.
Post by: orca94 on October 30, 2004, 03:43:00 PM
I recently bought a new EEPROM to save myself the trouble of fixing the old one (mainly cuz I have no idea how to). Here goes my info.
If I remember correctly I have a v1.4 xbox, and Im using a Xenium chip, and Avalaunch if thats any help. I also have a 120GB western didgital hard drive. My wxyz codes for my old EEPROM are: W: 0000-000B X: 0400-F001 Y: 00C2-01A4 Z: AFFF-0018, and the codes on the new EEPROM are different only in the Y and X areas: Y:00C2-03E0, Z:0000-0000. The error messages are also slightly different, on the old EEPROM is says Your Xbox console cannot communicate with Xbox Live because of technical configuration issues. Please call the Customer Care number listed in your Xbox Instruction Manual for more information, the error message with your EEPROM is Could not connect to Xbox Live. Check these possible options: -If you connect though a router verify that the Maximum Transmission Unit (MTU) size on the router is set to 1365 or greater. If you connect through a PC using Windows Internet Sharing (ICS), see www.xbox.com/connect for more information. -Your ISP may require additional steps to use Xbox Live. See www.xbox.com/connect for more information specific to your ISP. None of the error message while using the new EEPROM apply to me, I'm not using a router, ICS, and my Xbox is fully configured to work on my network.
Thanks
Post by: remas99 on October 31, 2004, 01:13:00 AM
I never even got to play one game
Post by: RicoBoy on October 31, 2004, 01:17:00 AM
Post by: Fuzzy on February 05, 2003, 03:55:00 PM
Post by: emailer33 on February 05, 2003, 04:05:00 PM
Post by: kyle! on November 01, 2004, 03:12:00 PM
| QUOTE (kyle! @ Nov 1 2004, 01:39 AM) |
| Yo, i've got the same fucking problem... My XYZ are: X: 0000-000D Y: 008A-0F80 Z: AFFF-0018 Somebody can help me? I mean, tell me if i'm banned or not. Thx guys. |
Pls!
Post by: brass monkey2 on February 05, 2003, 06:20:00 PM
if so then you did not read carefully.
they are a lot more things discoved then just a 6 in the y code
Post by: brass monkey2 on February 05, 2003, 06:21:00 PM
| QUOTE (Fuzzy @ Nov 27 2002, 05:08 AM) |
| This is a re-post of my discoveries as a seperate topic. Ok, ive looked through a lot and here's how its working. X. First of all, the first four numbers of x should always be zeros. They SHOULD always but I haven't seen one that isn't (if yours isn't contact me.) Y. 00A8 seems to be common among banned and not banned boxes. Now here is where the problem is. Apparently 6860 indicates an LPC mod that is enabled or a non switched non-LPC mod enabled. 6820 means that the system had once had a modchip in it but at the moment is not running. Other wise it should be something like 4840 or 4820. Z. The last row (a.k.a Z) has to do with packets and trashed responses. The first 4 numbers deal with response on whether is banned, will be banned, or is not banned. It looks like 8015 is banned/to be banned and 0015 is already banned but depending on type of chip you have you may never get this number (LPC or other). The last 4 numbers are a combo. The first two (19 generally) have to do with which live region your in (dont ask) the second two have to do with packet receiving. D is no packets, C is two packets one trashed, 17 is trashed but readable packet. 0000 is any amount of none trashed packets. A good code should look something like this: X: 0000-F021 Y: 00A8-4840 Z: 0000-0000 This is what I have deciphered and I believe it is 99.9% correct. I hope it is of some use to Zander, Opjose, Undead, Or someone. Thanks for your time |
in the first post read this and it says many things about banned and unbanned codes
Post by: DarkAvenger2k6 on November 01, 2004, 06:06:00 PM
| QUOTE (kyle! @ Nov 2 2004, 12:15 AM) |
| Pls! |
Sorry to give u bad news, but, i need to tell u the truth.
Yes, u are banned.
Good luck with your new xbox!
Post by: exiva on November 01, 2004, 06:40:00 PM
X: 0000-F001
Y: 008A-OFE0
Z: AFFF-0018
Post by: StarmanUK on February 06, 2003, 02:52:00 AM
| QUOTE (Fuzzy @ Feb 6 2003, 12:55 AM) |
| looks like you have more of a problem plugging your wire in according to those codes |
Nope the cable is plugged in and connected fine.
Post by: Fuzzy on February 06, 2003, 11:54:00 AM
| QUOTE (StarmanUK @ Feb 6 2003, 10:52 AM) | ||
Nope the cable is plugged in and connected fine. |
odd, are you sure your being delt an ip properly because it sounds like your not even connecting to the internet.
Post by: SlagWeb on November 06, 2004, 11:30:00 AM
| QUOTE (exiva @ Nov 2 2004, 03:43 AM) |
| heres my xyz codes. X: 0000-F001 Y: 008A-OFE0 Z: AFFF-0018 |
Ha! I have exactly the same! I think we're banned.
This time I'm only getting the "Can't Connect" message instead of the "Modified Hardware" message. Anyone else?
Post by: SadisticSaviorX on November 07, 2004, 01:52:00 AM
Y:00A8-4860
Z:0000-0000
give it to me strait. am i banned?
Post by: savah on November 09, 2004, 08:29:00 PM
So we move on to the codes,
His codes are :
W : 0000 - 000B
X : 0000 - 000D
Y : 00C2 - 0380
Z : 0000 - 0000
L: 0ms
anyone knows whats going on ????? please reply..........
Post by: baturkin17 on November 10, 2004, 02:23:00 AM
i get...
cables conected
ip found
dns found
XBOX LIVE NOT FOUND
my xyz codes are..
w: 0000 - 000B
x: 0000 - F029
y: 00C2 - 0062
z: 0000 - 0000
i shoulnt be banned, as i dont even have live yet (im trying to sign up) and i dont think i ever tried to connect with the chip on.
am i banned ?
-EDIT- this is direct connection with the modem btw.
Post by: solid7x2 on November 10, 2004, 05:16:00 AM
1.00.5971.01
w:0000 - 000B
x:0000 - F001
y: 008A - 0FE0
z: SFFF - 0018
l: 0ms (0ms)
Post by: baturkin17 on November 10, 2004, 06:44:00 AM
i really need to know if i am banned soon.
Post by: ertai22 on November 10, 2004, 10:10:00 AM
| QUOTE (SadisticSaviorX @ Nov 7 2004, 10:55 AM) |
| X:0000-F001 Y:00A8-4860 Z:0000-0000 give it to me strait. am i banned? |
Same numbers as above.
I'm sorry if there was an answer, but there are a lotta numbers floatin around so I might've missed it.
Post by: drhamilton11 on November 10, 2004, 10:56:00 AM
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 190D
Hope you can figure something out.
Post by: Skunky on November 10, 2004, 11:03:00 AM
| QUOTE (kyle! @ Oct 31 2004, 04:39 PM) |
| Yo, i've got the same fucking problem... My XYZ are: X: 0000-000D Y: 008A-0F80 Z: AFFF-0018 Somebody can help me? I mean, tell me if i'm banned or not. Thx guys. |
I have the same codes as well.... I have not been on live in over 6 months... Just turned it on last night with no halo2 updates and i get xbox live not found... grrrrr
Post by: iLLNESS on November 26, 2004, 02:43:00 AM
| QUOTE (solid7x2 @ Nov 10 2004, 02:19 PM) |
| I am getting that network error.. 90% sure Im banned... What do the experts say? 1.00.5971.01 w:0000 - 000B x:0000 - F001 y: 008A - 0FE0 z: SFFF - 0018 l: 0ms (0ms) |
well judgng by the fact your second set of Y doesnt start with 6 your not banned
and judging by the fact that your ping is 0ms id say you actually cant connect to live
so your %90 wrong
Post by: Vyal on November 26, 2004, 10:23:00 PM
W:0000-000B
X:0000-F001
Y:00A8-4860
Z:0000-0000
L:13ms (17ms) 20/20
This looks like a good code. I open up live and it says not found and kicks me to troubleshoot. This is where it gets wierd. I get green all across the board. I even get Xbox Live Found. But as soon as i click out of troubleshoot then i get the unable to connect message. Any insights?
Post by: GhostFaced on November 26, 2004, 10:26:00 PM
It has a link to the Xbox.com forums, seems everyone is having trouble connecting all across the country.
Post by: Fuzzy on February 14, 2003, 11:36:00 AM
How To Get Your XYZ Info.
ATTENTION, THIS TUTORIAL ASSUMES YOU HAVE ALREADY FULLY INSTALLED XBOX LIVE!
1.Turn off your modchip and go to the Xbox Dashboard.
2.Click on the Xbox Live Tab.
3.Go to Network Connections.
4.Wait for the Green Lights (or red X'es depending on your setup) to load.
5.Once they load highlight the help button.
6.Over the help button press the Y button.
7.An X code a Y code and a Z code will come up along with more packet data including upload and download speed.
8.Take note of these Numbers.
9.Post results in Xyz Code, Uncoded on the Xbox-Scene forums in the Xbox Live section
On anotherr note,
Some people do not get this. I am going to have to say this for everyone who does not listen to a thing me, kickace, or opjose (or undead or etc) says.
Changing your XYZ Codes will do nothing. The XYZ codes are codes that deliver information about your system in data format. They do not relate to anything about being banned, they only tell you if you are or will be banned. People dont understand. CHANGING YOUR XYZ CODES WILL NOT UNBAN YOU EVEN IF YOU FIGURED OUT HOW i hope this helpes opjose and undead answer all the posts about people wanting to change their xyz codes.
-Fuzzy (yes i realize i have typed this before but noone sees it because its in the middle of the xyz post.
Post by: shanafan on February 15, 2003, 12:04:00 PM
| QUOTE |
| 4.Wait for the Green Lights (or red X'es depending on your setup) to load. 5.Once they load highlight the help button. 6.Over the help button press the Y button. |
I just press Y when the four tests are done. Is there now a help button? I hardly ever use Live, expect for NBA2K3 roster updates
Post by: groggrog on February 16, 2003, 01:44:00 PM
X: 0001-8005
Y: 00C2-0002
Z: 0000-0000
Post by: Fuzzy on February 16, 2003, 05:22:00 PM
| QUOTE (groggrog @ Feb 16 2003, 09:44 PM) |
| I am unable to connect to xboxlive. Here are my codes - can someone tell me if i'm banned? X: 0001-8005 Y: 00C2-0002 Z: 0000-0000 |
You dont look banned but ive been hearing alot about people having problems with c's in their code. have you changed your eeprom anyhow?
Post by: groggrog on February 16, 2003, 07:20:00 PM
| QUOTE (Fuzzy @ Feb 17 2003, 02:22 AM) | ||
You dont look banned but ive been hearing alot about people having problems with c's in their code. have you changed your eeprom anyhow? |
No, not at all. It's a pretty standard install, Xecuter2-Lite with on/off switch. Haven't been able to connect since the install...
Post by: Fuzzy on February 16, 2003, 08:04:00 PM
| QUOTE (groggrog @ Feb 17 2003, 03:20 AM) | ||||
No, not at all. It's a pretty standard install, Xecuter2-Lite with on/off switch. Haven't been able to connect since the install... |
hmm i have to look into this, alot of people are having connection problems with the c200 in their code.
Post by: -Gadget- on December 29, 2004, 07:27:00 AM
as this is still very relevant subject.. and now more or less forgotten about !
Mick ..
Post by: nikeskateboarding.net on January 02, 2005, 03:58:00 PM
1.00.5971.01
W: 0000 - 000B
X : 0000 - 000D
Y : 008A - 0F80
Z : AFFF - 0018
L : 0ms (0ms) p : 0/0
MT : 1 (0015-00F0)
IC : 1 (0015- 00F0)
NT : 0
Post by: allamala on February 19, 2003, 09:34:00 AM
auto settings ,got banned for going online with a (disabled) v4 bioxx (as everybody knows the v4 is detectable)
x: 0000-F001
y: 00A8-6860
z: 8015-1917
Post by: Fuzzy on February 19, 2003, 10:21:00 AM
Post by: pagancow on January 11, 2005, 11:50:00 PM
Post by: sheldonicarluchi on January 20, 2005, 04:01:00 PM
W: 0000-000B
X: 0000-F021
Y: 00A8-4860
Z: 0000-0000
L: 65535ms (65535n p:0/0
HELP?!
Post by: ruddyone on January 29, 2005, 02:04:00 AM
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 0062
Z: 0000 - 0000
L: 0ms (0ms) P: 0 / 0
MT: 1 (0015 - 00F0)
IC: 1 (0015 - 00F0)
NT: 0
Also, can someone tell me how to edit a 1.6b eeprom? I can't find it anywhere.
Thanks!
Post by: ruddyone on January 29, 2005, 02:35:00 AM
Changing NTSC to PAL and restarting the system then
Changing PAL back to NTSC and restarting the system then
using Live with the standard M$ dashboard fixed the problem for me.
Just a word to the wise, I tried making this change using other programs but for some reason only the Enigmah tool worked.
Post by: TheMasGaster on February 09, 2005, 06:38:00 PM
So can anyone give me any advice that might help out? Much obliged.
Oh yeah, and I use slayers to lock/unlock the drives.
Post by: TheMasGaster on February 09, 2005, 09:19:00 PM
X: 0000-F001
Y: 00C2-03E0
Z: 0000-0000
L: 0m/s
Interesting, it seems I have the "C2" situation on my hands. Still a bit confused as to what my next step should be. Any ideas? My xbox is your guinnea pig
Post by: allamala on February 26, 2003, 05:18:00 AM
Post by: crs_01 on February 26, 2003, 03:35:00 PM
Got an origional X-Ecuter in my Xbox and in UK.
Will I get banned soon as i try live or what???? cos of my chip?
and what the frig do i have to do to not b banned apart from instal a new one?
can i use the switch?
cheers
Post by: Fuzzy on February 26, 2003, 05:44:00 PM
| QUOTE (crs_01 @ Feb 26 2003, 07:35 PM) |
| This is gonna sound really stupid but iv been out of the loop for a while but im not arsed..... Got an origional X-Ecuter in my Xbox and in UK. Will I get banned soon as i try live or what???? cos of my chip? and what the frig do i have to do to not b banned apart from instal a new one? can i use the switch? cheers |
check shanas tutorial, its pinned in the live section
Post by: TheMasGaster on February 25, 2005, 10:21:00 AM
QUOTE(TheMasGaster @ Feb 9 2005, 09:25 PM)
Update on my last post: I found my XYZ's
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TheMasGaster on February 26, 2005, 04:04:00 PM
-
All right, I tried it. My 120gig hdd that was banned originally also got the no connection error and also shows the C2 code. At this point, I'm not sure if my xbox will ever be able to get back on live no matter what I try
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Statecowboy on February 26, 2005, 11:50:00 PM
-
Wow....
W: 0000-000B
X:0000-F001
Y:00C2-01E4
Z:AFFF-0018
L: 0ms (0ms)
P:0/0
I think I was originally banned (although I don't know how, I have an X3 which is suppsoed to not allow xblive enabling). I then jacked around with eeprom stuff and f'd the whole thing up I'm sure.
AM I BANNED???
HOW DO I FLASH A NEW EEPROM???
I HATE M$...EXCEPT THEY MAKE SUCH FUN PRODUCTS!!!! A HOLES!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on March 01, 2005, 04:13:00 PM
-
I don't know if it has been discussed here before, but it seems that "190D" in the second set of numbers on "Z" means "Banned due to softmoding".
Check THIS thread out.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ukalimbe on March 02, 2005, 12:04:00 PM
-
I've got the C2 error also -
Got banned with X-chip and 40GB maxtor, so I cancelled my account in December. I recently got a new eeprom and new 80GB seagate formated with slayers 2.6 option 3.2b, flashed eeprom and replaced drive, and I get this when trying to set up a new account.
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 00C2-0042
Z: 0000-0000
L: 0 ms (0ms) P: 0/0
Tried the video switch mentioned early in the post and got
Y: 00C2-0E42
Loaded eeprom in liveinfo only to discover it's a version 1.6 eeprom, and my original is a 1.1 So, I tried to use liveinfo to convert it down to a 1.1 (not sure if it's supposed to work anyways, but what the hell), and I get this:
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 00C2-0062
Z: 0000-0000
L: 0 ms (0ms) P: 0/0
During this process, I noticed that the eeprom was reporting a mac address that looked good, but in Evox settings, I was getting a generic one 00:50:f2:00:00:00, and in live! troubleshooting, I was getting a completely different one that didn't match the eeprom or the settings one...kinda bizarre. So, I tried to add the mac reported in the eeprom in the live! settings, and I got this:
1.00.5971.01
W: 0000-000B
X: 0000-F021
Y: 00C2-0062
Z: 0000-0000
L: 0 ms (0ms) P: 0/0
So, I have no idea what this means, but thought it may help.
But, I do have the original 1.6 eeprom I bought that's supposed to be virgin that I can't use on my box, so if there's anyone intersted, I'd happily trade it for an unbanned NTSC 1.1 eeprom.
Tim
-
Title: Help for XYZ Live codes - See if you are banned
Post by: fghipple on March 05, 2005, 09:00:00 AM
-
Overcome the 00c2 problem after EPROM update.
I've been having the Y:00C2:03E0 error that's been cropping up on this thread alot recently. I *think* i've resolved the issue, so I figured I'd post it here for comments from the cognoscenti and guidance for the other newbies like myself.
Problem: XB1.6, got banned somehow, tried to implement the marriage theory solution (new hard drive, new eprom, new gamer tag). After the hd and eprom install, could no longer connect to XBLive, with the diagnostics telling me to change the MTU setting on my router and my XYZ codes set to:
W: 0000-0008
X: 0000-F001
Y: 00C2-03E0
Z: 0000-0000
L: 0 ms (0ms) P: 0/0
Solution that worked for me: The devil's in the details. I thought I could install the new HD by simply putting it in the Xbox and then using Slayer's to format and install the software. Reading through this thread taught me that I had some type of mismatched data, so I retraced my steps and more carefully read the tutorials for each step I had completed. Finally, in the HD-install tutorial, I found that I was supposed to prepare my HD for install. Whoops! I found I could do this by using HDPrep, but I was a bit nervous about running this prog on my computer, so instead I used the "New HD wizard" from my Xenium ICE OS. *Then* I used slayer's to reformat and install utils. THe 00C2 problem went away and I was registered with a new gamer tag and playing halo2 within 30min.
Diagnostics: The light came on for me when backtracked to my old HD and old EPROM. This resolved the 00C2 error, but of course brought me back to the problem of being banned. This at least told me that at least in my case it was nothing with the network, banned status, etc--but some stupid mistake I had made. I also guessed it was my mistake from the snide "read the first post" comments posted in response to this type of problem.
Caveats:
1) I've only been back on live for 1 day. I'm not saying this will fix your live problems--just that it moved me past the 00C2 error, possibly to my next dumb-*** mistake.
2) The solution worked for me but my interpretation could be way wrong. In particular, I found some threads which claimed you don't need HDPrep, so maybe I my solution worked for some other reason. If you can correct me on anthing, please do.
3) In my personal experience, I couldn't get HDconfig to work of the Slayer's disk, no way, no how (wrong version selected error). Maybe I needed to run it from the HD? Anyways, I ended up using the Xenium OS to do all backups and installs for the EPROM. This might make my case different than yours.
4) I still don't know exactly how I got banned--I was very very careful. I bought my Xbox pre-modded with a new HD. I've read that multiple people can go live with the same EPROM. I'm wondering if I have a cloned EPROM and someone else gets banned with it do we all get banned? Another possibility is that my girlfriend went live with one of her games with the mod on but won't fess up. In any event, I *know* I was banned, but I don't know how, so again my results may vary from yours.
Requests for Info:
1) Am I correct that Slayer's does NOT do a HD prep? That it should be used after something like HDPrep?
2) If so, am I correct that the Xenium HD wizard does complete HD prep? This util seems to do the HDprep, partitioning, and then copyies the old C:\ to the new C:\ (requires both HDs installed on the Xbox, requiring a power cable splitter). I was a bit worried that this util would also copy whatever secret code identifies my old (banned) hd onto my new (unbanned) hd, but I doubt it as it seems most standard disk functions can't write these codes.
3 Although I used the Xenium util specialized to my mod, I'm guessing that using HDprep would also have solved the issue. I was hesitant because I downloaded it from a tutorial and it didn't come with a help file, readme and I couldn't verify that it was the latest edition (I downloaded 1.3) so I decided to stick with the Xenium util.
Thanks:
Trying to get unbanned was actually more fun that being on live. Thanks to the cognoscenti for leaving a trail of crumbs to follow.
FatGlenHipple
-
Title: Help for XYZ Live codes - See if you are banned
Post by: skiguy411 on March 06, 2005, 08:21:00 AM
-
I'm still a bit confused on how to fix this C2 error. Is there anyone out there that would be willing to write a step by step guide?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TheMasGaster on March 07, 2005, 09:05:00 PM
-
I regained hope after reading your post. Alas, I still have the C2 problem.
I formatted my retail hdd, then used xhdprepa13 to prepare my hdd
I then booted the slayers disk and restored the drive to retail. I ran configmagic and updated to a new eeprom, them locked the drive with slayers
Still the networking C2 error.
Any other thoughts/suggestions?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: LunchboxDom on March 08, 2005, 01:28:00 AM
-
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 4860
Z: 0000 - 0000
65535 ms p:0/0
MT: 1 (0015 - 00F0)
IC: 0 (8007 -274C)
NT: 3
Happens on both my modded and unmodded box (although I recently sold the unmodded one).
Xbox Live not found error....but once I disable the firewalls on my router, it works
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Kai920 on March 08, 2005, 08:40:00 AM
-
Forgot to add the details
Softmoded with UXE Complete 0.2.1
CANNOT connect. Think it has to do with my region code, but cannot change it
-
Title: Help for XYZ Live codes - See if you are banned
Post by: beamer7296 on March 09, 2005, 09:57:00 AM
-
1.00.5971.01
W 0000-000B
X 0000-F001
Y 00A8-6640
Z 8015-190D
what does it mean?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MR-T on March 09, 2005, 01:27:00 PM
-
I have tried everything with the C2 error, even prepping a new hd and putting it in.
Is it remotely possible that the new eeprom I bought was already married to another HD? It won't work with my stock xbox hd, or the new one I put in, I have all the region settings right, I have tried 1.0/1.1 versions and I know it is not a network problem. You call a C2 a hardware mismatch? Could it have been married before?
Edit: I also tried the Video mode switching.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on March 09, 2005, 02:12:00 PM
-
Post by: TheMasGaster on February 26, 2005, 04:04:00 PM
Post by: Statecowboy on February 26, 2005, 11:50:00 PM
W: 0000-000B
X:0000-F001
Y:00C2-01E4
Z:AFFF-0018
L: 0ms (0ms)
P:0/0
I think I was originally banned (although I don't know how, I have an X3 which is suppsoed to not allow xblive enabling). I then jacked around with eeprom stuff and f'd the whole thing up I'm sure.
AM I BANNED???
HOW DO I FLASH A NEW EEPROM???
I HATE M$...EXCEPT THEY MAKE SUCH FUN PRODUCTS!!!! A HOLES!
Post by: Lord Magnus on March 01, 2005, 04:13:00 PM
Check THIS thread out.
Post by: ukalimbe on March 02, 2005, 12:04:00 PM
Got banned with X-chip and 40GB maxtor, so I cancelled my account in December. I recently got a new eeprom and new 80GB seagate formated with slayers 2.6 option 3.2b, flashed eeprom and replaced drive, and I get this when trying to set up a new account.
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 00C2-0042
Z: 0000-0000
L: 0 ms (0ms) P: 0/0
Tried the video switch mentioned early in the post and got
Y: 00C2-0E42
Loaded eeprom in liveinfo only to discover it's a version 1.6 eeprom, and my original is a 1.1 So, I tried to use liveinfo to convert it down to a 1.1 (not sure if it's supposed to work anyways, but what the hell), and I get this:
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 00C2-0062
Z: 0000-0000
L: 0 ms (0ms) P: 0/0
During this process, I noticed that the eeprom was reporting a mac address that looked good, but in Evox settings, I was getting a generic one 00:50:f2:00:00:00, and in live! troubleshooting, I was getting a completely different one that didn't match the eeprom or the settings one...kinda bizarre. So, I tried to add the mac reported in the eeprom in the live! settings, and I got this:
1.00.5971.01
W: 0000-000B
X: 0000-F021
Y: 00C2-0062
Z: 0000-0000
L: 0 ms (0ms) P: 0/0
So, I have no idea what this means, but thought it may help.
But, I do have the original 1.6 eeprom I bought that's supposed to be virgin that I can't use on my box, so if there's anyone intersted, I'd happily trade it for an unbanned NTSC 1.1 eeprom.
Tim
Post by: fghipple on March 05, 2005, 09:00:00 AM
I've been having the Y:00C2:03E0 error that's been cropping up on this thread alot recently. I *think* i've resolved the issue, so I figured I'd post it here for comments from the cognoscenti and guidance for the other newbies like myself.
Problem: XB1.6, got banned somehow, tried to implement the marriage theory solution (new hard drive, new eprom, new gamer tag). After the hd and eprom install, could no longer connect to XBLive, with the diagnostics telling me to change the MTU setting on my router and my XYZ codes set to:
W: 0000-0008
X: 0000-F001
Y: 00C2-03E0
Z: 0000-0000
L: 0 ms (0ms) P: 0/0
Solution that worked for me: The devil's in the details. I thought I could install the new HD by simply putting it in the Xbox and then using Slayer's to format and install the software. Reading through this thread taught me that I had some type of mismatched data, so I retraced my steps and more carefully read the tutorials for each step I had completed. Finally, in the HD-install tutorial, I found that I was supposed to prepare my HD for install. Whoops! I found I could do this by using HDPrep, but I was a bit nervous about running this prog on my computer, so instead I used the "New HD wizard" from my Xenium ICE OS. *Then* I used slayer's to reformat and install utils. THe 00C2 problem went away and I was registered with a new gamer tag and playing halo2 within 30min.
Diagnostics: The light came on for me when backtracked to my old HD and old EPROM. This resolved the 00C2 error, but of course brought me back to the problem of being banned. This at least told me that at least in my case it was nothing with the network, banned status, etc--but some stupid mistake I had made. I also guessed it was my mistake from the snide "read the first post" comments posted in response to this type of problem.
Caveats:
1) I've only been back on live for 1 day. I'm not saying this will fix your live problems--just that it moved me past the 00C2 error, possibly to my next dumb-*** mistake.
2) The solution worked for me but my interpretation could be way wrong. In particular, I found some threads which claimed you don't need HDPrep, so maybe I my solution worked for some other reason. If you can correct me on anthing, please do.
3) In my personal experience, I couldn't get HDconfig to work of the Slayer's disk, no way, no how (wrong version selected error). Maybe I needed to run it from the HD? Anyways, I ended up using the Xenium OS to do all backups and installs for the EPROM. This might make my case different than yours.
4) I still don't know exactly how I got banned--I was very very careful. I bought my Xbox pre-modded with a new HD. I've read that multiple people can go live with the same EPROM. I'm wondering if I have a cloned EPROM and someone else gets banned with it do we all get banned? Another possibility is that my girlfriend went live with one of her games with the mod on but won't fess up. In any event, I *know* I was banned, but I don't know how, so again my results may vary from yours.
Requests for Info:
1) Am I correct that Slayer's does NOT do a HD prep? That it should be used after something like HDPrep?
2) If so, am I correct that the Xenium HD wizard does complete HD prep? This util seems to do the HDprep, partitioning, and then copyies the old C:\ to the new C:\ (requires both HDs installed on the Xbox, requiring a power cable splitter). I was a bit worried that this util would also copy whatever secret code identifies my old (banned) hd onto my new (unbanned) hd, but I doubt it as it seems most standard disk functions can't write these codes.
3 Although I used the Xenium util specialized to my mod, I'm guessing that using HDprep would also have solved the issue. I was hesitant because I downloaded it from a tutorial and it didn't come with a help file, readme and I couldn't verify that it was the latest edition (I downloaded 1.3) so I decided to stick with the Xenium util.
Thanks:
Trying to get unbanned was actually more fun that being on live. Thanks to the cognoscenti for leaving a trail of crumbs to follow.
FatGlenHipple
Post by: skiguy411 on March 06, 2005, 08:21:00 AM
Post by: TheMasGaster on March 07, 2005, 09:05:00 PM
QUOTE(fghipple @ Mar 5 2005, 09:06 AM)
Overcome the 00c2 problem after EPROM update.
I regained hope after reading your post. Alas, I still have the C2 problem.
I formatted my retail hdd, then used xhdprepa13 to prepare my hdd
I then booted the slayers disk and restored the drive to retail. I ran configmagic and updated to a new eeprom, them locked the drive with slayers
Still the networking C2 error.
Any other thoughts/suggestions?
Post by: LunchboxDom on March 08, 2005, 01:28:00 AM
X: 0000 - F001
Y: 00A8 - 4860
Z: 0000 - 0000
65535 ms p:0/0
MT: 1 (0015 - 00F0)
IC: 0 (8007 -274C)
NT: 3
Happens on both my modded and unmodded box (although I recently sold the unmodded one).
Xbox Live not found error....but once I disable the firewalls on my router, it works
Post by: Kai920 on March 08, 2005, 08:40:00 AM
Softmoded with UXE Complete 0.2.1
CANNOT connect. Think it has to do with my region code, but cannot change it
Post by: beamer7296 on March 09, 2005, 09:57:00 AM
W 0000-000B
X 0000-F001
Y 00A8-6640
Z 8015-190D
what does it mean?
Post by: MR-T on March 09, 2005, 01:27:00 PM
Is it remotely possible that the new eeprom I bought was already married to another HD? It won't work with my stock xbox hd, or the new one I put in, I have all the region settings right, I have tried 1.0/1.1 versions and I know it is not a network problem. You call a C2 a hardware mismatch? Could it have been married before?
Edit: I also tried the Video mode switching.
Post by: Lord Magnus on March 09, 2005, 02:12:00 PM
QUOTE(beamer7296 @ Mar 9 2005, 05:03 PM)
1.00.5971.01
-
Title: Help for XYZ Live codes - See if you are banned
Post by: eh. on March 10, 2005, 08:58:00 AM
-
(Almost all other 190D's seem to have been have been "Soldermoded" eh.
)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: eh. on March 10, 2005, 11:40:00 AM
-
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TheMasGaster on March 11, 2005, 09:44:00 AM
-
Allright folks, C2 error solved.
If you have it, first try everything in this thread that doesn't involve getting a new eeprom. I did and it didn't work for me, it worked for others however so try your luck.
If you are like me and have tried it all and still can't connect, get a new eeprom, but make SURE that it is a true virgin eeprom and that it not only is unbanned, but ALSO has NEVER been on live. This is the important part. Some people sell unbanned eeproms that have been on live, but don't plan on connecting anymore, these will not work! XLive has found a way to marry the eeprom to the hdd that first uses it on live, I don't know how, but this is the only thing that worked for me and I don't see another explanation. I got a true virgin eeprom and used configmagic and I was back on right away.
Long journey, getting to the finish line with ya'll was fun. Thanks all for advice and such!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: STICKY_BUD on March 11, 2005, 09:19:00 PM
-
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on March 12, 2005, 07:10:00 AM
-
Unfortunatley, that will not tell you if it is a virgin. Those codes were obtained with your cable unplugged, hence, all the "0's".
Check on your other post about it, I came up with a suggestion about checking which Live! version they have installed.
Good Luck mate.
:beer:
-
Title: Help for XYZ Live codes - See if you are banned
Post by: skiguy411 on March 12, 2005, 08:28:00 AM
-
Does a C2 error mean I have been flagged?
I should be able to just get a new eeprom and be able to play on live with my 120 gig hard drive correct?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TheMasGaster on March 12, 2005, 10:02:00 AM
-
Check out the marriage theory thread before doing anything--has the 120gig been banned? You might have to get a retail xbox hdd (not too expensive, check out ebay or the buy/sell forums). When you get a new eeprom, make sure its unbanned AND has never been on live.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TheMasGaster on March 12, 2005, 10:07:00 AM
-
Hey all, now that I'm back on live I have no use for the C2 eeprom I'm not using. I bought this eeprom unbanned and it should still be an unbanned eeprom. I'll give it to the first person that:
--replies that they want it in this thread, and
--has the C2 error in their XYZ's, and
--promises to report back on whether or not it worked or just came up C2 again
Again, this is a free, unbanned eeprom I'm giving away. I don't feel like selling it and just want to learn if there really is something to the mismatched configuration theory. Like I said before, I'm guessing that this eeprom was used on xbox live on a different box and, while not banned, is married to that original box. But who knows, maybe it is a configuration thing and it will solve your C2 problem.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: skiguy411 on March 12, 2005, 12:18:00 PM
-
TheMasGaster....Ill try it!
Here are my codes
1.00.4920.01
X:0000-F00I
Y:00C2-03C0
Z:0000-0000
This post has been edited by skiguy411: Mar 12 2005, 08:21 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TheMasGaster on March 12, 2005, 12:45:00 PM
-
You got it skiguy411, just PM me your e-mail addy--don't forget to post your results!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: skiguy411 on March 12, 2005, 01:48:00 PM
-
Sigh, no luck with the new EEPROM.
I used configmagic to write and tried to get back online. I have the same exact codes as before.
Looks like I'll have to find one that hasn't been on live before.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: skiguy411 on March 12, 2005, 04:05:00 PM
-
OK I'm back on live for now! I purchased a virgin EEPROM from XS Filter - 032408 -3 and recieved it a couple of hours later. Worked perfect!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TheMasGaster on March 12, 2005, 10:59:00 PM
-
Congrats man, I think we have this C2 error whooped! OP should edit the thread with the new info on solving this thing.
This post has been edited by TheMasGaster: Mar 13 2005, 07:03 AM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 13, 2005, 06:23:00 PM
-
ok i was wondering where i need to go to look at my hardware setting on avalaunch. i went to setting and main options but i dont see where the video mode that harry tasker saw. i have the switcher now and i just wat to get this done so i can play on live
im pretty sure that i ve the same prob symptoms sound the same.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 13, 2005, 07:05:00 PM
-
my xyz
W: 0000-000B
X:0000-FOO1
Y:00C2-0042
Z:0000-0000
any ideas of the prob and solution
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MR-T on March 13, 2005, 10:00:00 PM
-
Yeah, I got another new eeprom and it started workign for me. I think that the one I was originally sold must have been married to another HD already.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 14, 2005, 02:11:00 AM
-
yes i just used the enigma video switcher and im on live and livin it up. that should be the first thing that you try b4 buying anything, its free and its worth a shot. thankx to this forum im on live i love you guys.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: STICKY_BUD on March 14, 2005, 09:26:00 AM
-
glad you found your answer!! :)
do you know how your video region got switched?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 15, 2005, 02:37:00 AM
-
i switched it once when ifirst got my chip put in. that was like 6 months ago but this was the first time Ive tried going on live since ive had my box. other than that i dont believe that it was switched. i have an xenium ice chip and i switched it in the xos.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: phantazma1 on March 03, 2003, 08:49:00 AM
-
are you banned if the moment you go into the LIVE dash, it says something like
"network couldn't be established"? i got an eeprom for my friend, used configmagic
"update eeprom" option, but it doesn't seem it work. is it a local issue?
it says "live not found" in the 4 tests, but i'm not sure if it's banned.
the eeprom is not banned because it's brand new
*UPDATE*
he has a Linksys NR041 modem, which on the MS page says that it doesn't support
LIVE very well...hmm... anyone have any suggestions?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Poppeseed on March 19, 2005, 08:30:00 PM
-
My Codes
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 00C2-03C0
Z: 0000-0000
L: 0ms (0ms) p:0/0
Any Idea why i get the Xbox LIve not Found error?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 19, 2005, 10:04:00 PM
-
Poppeseed,the first thing you should try is getting the enigmah pal/ntsc video switcher, if you switched your video settings at one time this might be your problem i had, its the simpleest way to to try and solve this problem. all i had to do was get it and then use it and i got on live just fine.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Poppeseed on March 19, 2005, 10:46:00 PM
-
I got the Video switcher (enigmah) from the usual places, made sure it was on ntsc, and then i was like, ok this is good,
Went to boot from live, Xbox Live Not Found
EDIT: and I never switched the video settings
This post has been edited by Poppeseed: Mar 20 2005, 06:48 AM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 20, 2005, 12:29:00 AM
-
hhmmm you might have the problem the first guy had in this thread with a bad hdd copy. not really sure how to do that one but im sure some one can help you. what chip do you have, and hopw did you upgrade your hdd? I have an xenium ice chip and it has a hdd upgrade wizzard that did it all for me, im not sure if other chips have the same feature.hhmm you xyz's were different from mine so i didnt think that we had the same problem look through this thread and see if anyone else has your same xyz code and see what they did or said.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 03, 2003, 11:37:00 AM
-
what are your xyz codes
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Poppeseed on March 20, 2005, 12:05:00 PM
-
I have an X3, and i had a new hdd, made the mistake of going on live, and got banned.
SO i got a new HDD (stock) and a new EEPROM, and the first thing i did, was put in the HDD, and it had the files on there. I put a few game saves on it, then flashed the eeprom, and the only difference between the two settings was the DVD region code...Could that be it? the old was a 1, the new was a 0.
I'll look into this thread more.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: phantazma1 on March 03, 2003, 12:59:00 PM
-
x 0000-F001
Y 008A-0FE0
Z 8015-1918
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 03, 2003, 01:25:00 PM
-
never seen one like that ever, your on your own kid
-
Title: Help for XYZ Live codes - See if you are banned
Post by: phantazma1 on March 03, 2003, 02:14:00 PM
-
well that sux. i called MS about this, and they couldn't figure it out neither.
a techie is gonna call me in about 2-3 days. let's see what happens.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: liquidc3lls on March 23, 2005, 04:26:00 PM
-
i got a new EEPROM an it all ZEROS under all XYZ and W
is that odd
btw never been on live
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 24, 2005, 04:24:00 PM
-
i dont know if this helps anymore but im in arizona usa, my box stats are in my sig and im not banned.
Auto IP
Auto DNS
X:0000-F001
Y:00A84860
Z:0000-0000
Manual IP (incorrect)
Auto DNS
X:8001-0405
Y:0000-0000
Z:0000-0000
Manual IP (another incorrect one)
Auto DNS
X:8001-1005
Y:0000-0000
Z:0000-0000
Manual IP (correct)
Auto DNS
X:0001-8005
Y:00A8-4800
Z:0000-0000
Auto IP
Manual DNS( changed the stock value by one number)
X:0000-F009
Y:00A8-4860
Z:0000-0000
Manual IP (correct)
Manual DNS (stock setting)
X:0000-000D
Y:00A8-4800
Z:0000-0000
hope those help, and before, I had a C@ problem but fixed it with the enigmah video switcher. i believe that the codes for that were
X:0000-000D
Y:00C2-0002
Z:0000-0000
I switched my video mode to pal in my Ice OS and then put it back to Ntsc and i got this.
X:0000-000D
Y:00C2-0062
Z:0000-0000
I was coming through a Netgear router with the ip and dns on auto.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Rasalibra on March 25, 2005, 09:14:00 PM
-
I think the C2 error is actually having a 1.0 eeprom on a 1.1 type xbox im not sure if this is true but from what i get i think this is rite my codes are
X:0000-f001
Y:00C2-01E4
Z:AFFF-0018
also how and is it possible to convert a 1.0 eeprom to a 1.1 eeprom
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 26, 2005, 07:40:00 PM
-
the C2 error is a hardware mismatch, (read the first page of this thread) i suppose that a 1.0 eeprom in a 1.1 box could be a problem, i heard somewhere that 1.0-1.5 were pretty much the same. not sure if its true. also not sure if the eeprom can be correctly manipulated.
This post has been edited by sidewinder33: Mar 27 2005, 03:44 AM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: DarkBlade14 on March 27, 2005, 12:58:00 PM
-
Hey can someone help me out? Last Week I was on Live but then all of a sudden, i try to connect to live it says its not found, and I just got another eeprom put in.
My XYZ codes are:
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
HELP!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: DuckOfDeath on March 27, 2005, 08:37:00 PM
-
A box that was just banned. It's a 1.0 with an x2.3 chip in it. The chip was OFF when I took these codes:
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 00A8-6860
Z: 8015-190D
L: 0ms (0ms)
P: 0/0
MT: 1(0015-00F0)
IC: 1(0015-00F0)
NT: 0
I have another box, one I use soley for live. It did have a chip in it at one time, (I purchased it broken, needed the chip to fix it up). I only use this box for live now, and it is not banned. It is stock with the stock samsung dvd it came with, and the stock hard drive it came with. Here's the info on that one.
1.00.5971.01
W: 0800-000B
X: 0080-F001
Y: 00A8-4860
Z: 0000-0000
L: 63ms (64ms)
P: 16/25
MT: 1(0015-00F0)
IC: 1(8007-274C)
NT: 1
-Duck!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 27, 2005, 09:37:00 PM
-
hhmm you arent banned but your hardware has been messed with. both the 8A and the AFFF codes tell me that, but thats about all they tell me have you ever switched your video mode? did you copy your hdd correctly, did you buy your box new or used, do you know where it was originally made to run in i.e. europe or usa. i believe that you get this error from just messing with your eeprom either on purpose or not.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: DarkBlade14 on March 28, 2005, 12:09:00 AM
-
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bromhex on March 28, 2005, 10:54:00 PM
-
x: 0000-F001
y: 00A8-4860
z: 0000-0000
L: 59ms(63ms)
P: 20/20
and when i press the ok button another screen pops up and i get this:
MT 1(0015-00F0)
IC 1(0015-00F0)
NT 1
xbox 1.6 with samsung drive, original hdd,and xtra?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 29, 2005, 03:51:00 PM
-
hmm you dont really have any reason to not be able to get on. Was the eeprom the correct version for your xbox and was it the correct mode ie ntsc (since your in north america.) ask the "pro" if the eeprom was the right version and if that still doesnt give us an answer...... ? if everything your telling me is correct, then it should be good to go. ask him if he locked the hdd correctly because that can cause this problem too.
This post has been edited by sidewinder33: Mar 29 2005, 11:53 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: DarkBlade14 on March 29, 2005, 05:42:00 PM
-
Well the this guy gave the xbox back, live was working for like two or three days before this happened, so i dunno i think everything should be ok.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: DarkBlade14 on March 30, 2005, 01:15:00 PM
-
BUMP
-
Title: Help for XYZ Live codes - See if you are banned
Post by: thebroken on March 30, 2005, 02:54:00 PM
-
wow this is very intresting and i mean that in a non sarcastic way i read all of a tutorial for once
ThebRokEN
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Morlok8k on March 30, 2005, 02:44:00 PM
-
I had the C2 error on my xbox which had never been on live before. before i read this thread, i had thought that someting was wrong with the xbox itself because the serial number wasnt showing up on the connection screen (like it did on my unmodded box)
after reading this thread, i unlocked my HDD, then i used the Enginmah Videodisc Switcher. It was set to Ntsc, so i switched it to PAL, waited a few seconds, then swtiched it back to NTSC. I rebooted, then relocked my HDD, and my problems were gone!
my xyz codes before:
X:0000-F001
Y:00C2-0062
Z:0000-0000
my zyx codes after:
X:0000-F001
Y:00A8-4860
Z:0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 30, 2005, 04:50:00 PM
-
inbetween when you got it back and when it stoped getting on live what did you do. ie. "backup" games? just play on live?
Morlok i did the same thing and had the same codes, we got off easy :D
This post has been edited by sidewinder33: Mar 31 2005, 12:56 AM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: DarkBlade14 on March 31, 2005, 01:23:00 PM
-
Naw I didn't do anything really, I only played online. Then it happened.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on March 31, 2005, 04:57:00 PM
-
wow thats wierd so it worked and then all of a sudden it just stopped. and from your codes your not banned
this is a stumper, not really sure what to do.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: DarkBlade14 on March 31, 2005, 08:18:00 PM
-
ok man thx anways...at least i know i'm not banned
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Morlok8k on April 02, 2005, 07:42:00 PM
-
Yes, and im glad that that hassle is over!
i still have no clue to how it got that way though... oh well.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TB_88 on March 06, 2003, 07:59:00 AM
-
Now XBOX LIVE updates when u go to your live dash and connect or when u connect in a game...
So now u will have a w code and just not X Y Z codes...
What does the W code mean???
-
Title: Help for XYZ Live codes - See if you are banned
Post by: RiceCake on March 06, 2003, 10:16:00 AM
-
Codes, Codes...
Here it is, my W:
-=-=-=-=-=-=-=-=-
1.00.5335.01
W: 000-000B
X: 000-000D
Y: 00A8-4800
Z: 000-0000
UL: 8310KB DL: 5521KB
L: 66MS (73MS) P: 20/21
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 06, 2003, 03:57:00 PM
-
when the hell did the w codes come out?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: RiceCake on March 06, 2003, 04:13:00 PM
-
Dunno, update the dash. Theres been a whole bunch of stupid Live updates lately, might be it.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 06, 2003, 05:29:00 PM
-
oh shit, i just got my network card working again. Ill look around see what i can find. Everyone, time to start posting your Wxyz codes again so we can decode the w
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bearauto on March 06, 2003, 09:03:00 PM
-
W: 0000-000B
X: 0000-F001
Y: 00A8-4840
Z: 0000-0000
OK, those are my codes...if you don't already know, my xbox accessed live with the modchip ON, inadvertently, and I expect to be banned within a week or so...thus, my wxyz codes should change accordingly.
Forgot to mention, these codes were taken AFTER accessing LIVE with modchip ON. As of now, I can still access LIVE, but as I mentioned, that should change within a week's time.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: reece on April 09, 2005, 07:16:00 PM
-
hey guys,
my 2 cents.
thank you to everyone for your posts and research, it gave me a great idea of where i stood in regards to xbl.
modded my box nearly a year ago with a xenium ice + 250gig hdd. (important to note that i backed up my eeprom on instillation)
over the year my eeprom was messed with several times due to me just idleing playing with no idea + setting up soft mods for mates and having to change my hdd lock key.
When i finally decided to go live (was given a 12mth subscription) i did everything i could to hide all modded files from MS... dont know if it was needed but i moved all non MS stuff off c and e and left them as stock.
I was refering to xbox-scene the whole time and was hoping that the marrige theory was right as i didnt want to have to take my chip off everytime i connected (pain in ass).
When i first tried to log on and register i got the codes
x 0000 - F001
y 00c2 - 01E4
z AFFF - 0018
and as previously stated this refers to an eeprom issue and not a banning.
to me its MSs way of saying that they can see something is wrong but maybe they cant do anything about it..
that was when i started to read this thread and realised what it was...
i booted the xenurm OS and reverted to saved eeprom.. woo hoo. everything was fine
this was about 3 or 4 weeks ago now and no banning.
im still running
v1.1
xenium ice chip
250gig hdd
several diff dashboards (obviously i run live with the chip not booted and there for use the ms dash for live)
thanks again xbox-scene for giving me the confidence to have a play.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kizu7su on April 16, 2005, 10:47:00 AM
-
Here's my current #'s. I was banned for the marriage theory I guess, it said "you have modded hardware" and all that. Since then I have purchased 1 eeprom, used Configmagic 1.6 to flash and re-lock. The video mode was set to PAL, used Configmagic to change that back (live in US, was in Minnesota, now in South Carolina) and relock. Modified Hardware warning left, but now it doesn't find LIVE. All settings to auto, sorry I didn't think to record any previous codes.
Using hdunlock/atapwd I unlocked the drive with configmagic and relocked it with the win98 boot disk, but that apparently didn't change anything at all. Same codes as follows, before and after atapwd:
0000 - 000B
0000 - F001
00C2 - 03E0
0000 - 0000
those are all the steps i took. hope a lil confirmation can come from them.
*I will try to mess with settings and give different codes based on manual IP's and messed up info to see what I get. I've wasted my morning with atapwd with no result and ran out of time =(
kizu
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kizu7su on April 16, 2005, 01:00:00 PM
-
Just remembered I did use enigmah once before, not sure if I unlocked before and locked after (been a while), but I just re-did it by unlocking with configmagic and using enigmah to switch as Morlok did, and using configmagic to relock it with the hdlock password I got from evox backup command that worked in atapwd.exe. no change at all.
I am curious whether or not the replacement eeprom I purchased was a PAL version or if there was any difference in the xbox version (haven't checked mine but I got it when xbox live luanched, so it's about 2-3 years old now I suppose). Would there be any need for me to purchase yet another eeprom to try, or has anyone tried that (searched, didn't return anything conclusive) and can advise one way or the other?
kizu
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on April 16, 2005, 06:14:00 PM
-
i believe that if your eeprom was a pal you'd get the c2 error, even if you switch the video mode. The eeprom is still pal, i dont know if there is anyway to really tell, other than just knowing from the start.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kizu7su on April 16, 2005, 08:44:00 PM
-
So...try for a new one? lol
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MickeYd420 on March 08, 2003, 12:46:00 PM
-
i was just checking this and i connected and for x its
x:0001-8005
i was just wondering cuz u said they all should be zero. I have a unbanned xbox with a x2 lite in it. LMK
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on April 17, 2005, 11:43:00 AM
-
wouldnt hurt and if it doesnt help you can sell it, hahah its worth a try.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kizu7su on April 17, 2005, 08:32:00 PM
-
lol just sent payment. Now, I hate asking questions that have answers, but I'm a little gunshy after doing all of this before. Will ConfigMagic 1.6 Final do the job, or will it give me some sort of C2 problem again?
I guess we'll see...just ordered one =)
kizu
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on April 17, 2005, 09:07:00 PM
-
from everything ive read configure magic 1.6 works just fine. i have read some rumors that it might not lock and unlock the hdd correctly. now im sure that if it was a really a problem then it would have been dealt with. best of luck. hope everything works out for ya.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: reece on April 19, 2005, 04:08:00 AM
-
Hey guys,
Has anyone had any troubles going live since getting the 1.1 update for halo 2?
w: 0000 - 000B
x: 0000 - 000D
y: 0088 - 1C00
z: 0000 - 0000
Am thinking (wishfull thinking?) it may be just the network is overloaded with ppl getting the new maps today, but i cant connect outside of live either.
havent tried another live enabled game yet. just thought id throw it out there
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on April 19, 2005, 07:29:00 AM
-
They did say it was going to be a slow transition somewhow...
From the bungie.net website:
Edit: Typos
This post has been edited by Lord Magnus: Apr 19 2005, 02:31 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Ceth on March 08, 2003, 09:43:00 PM
-
Ya I just noticed the W code to, so I came to see if anyone had any info.
W: 0000-000B
X: 0000-F001
Y: 00A8-4840
Z: 0000-0000
Xbox v1.0 with matrix disabled.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kizu7su on April 19, 2005, 07:05:00 PM
-
well got the new eeprom, didn't swap the hdd or anything, don't have the cash for another 160gb. unbanned for a day, rebanned with the 'may have been modified' lol.
here are my new XYZ codes:
W 0000-000B
X 0000-000D
Y 00A8-6800
Z 8015-190D
hope those help.
kizu
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on April 19, 2005, 09:33:00 PM
-
Yeah mate... it sucks.
A new HD is needed unfortunately... Have you thought about swaping it with one on your PC or something like that?
Good luck.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on April 19, 2005, 11:50:00 PM
-
thats to bad kizu. when was the last time you went onto live. Like the last time it worked, because if it was longer than like last june then you should have been free of marriage theory, im really sorry that that didnt help but hey now you dont have the c2 error, so if all is tru all you need is anew eeprom and an new hdd, if your gonna use your old gamertag then youll need a stock hdd, if your gonna change it then all you need is the eeprom and the hdd. sorry you had to take the bullet,
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kizu7su on April 20, 2005, 07:30:00 AM
-
Ah, not a big deal, but thanks for the kind words =)
I had been going on live pretty regularly up until the big h2 ban. I got this box online a good 2-4 weeks before h2 came out.
And no clue if my PC hdd supports locking...I could look into that though.
I have a friend who has extra stock drives and such, but when I initially changed my eeprom, it wouldn't accept my stock drive back in the system when I was trying things out. I wouldn't know how to put his new stock drive in mine, short of sending him one of my old eeproms so he can upgrade that with ConfigMagic, mail it to me, and hopefully it'll work with mine and I can flash it with the new.
Would that work?
-kizu
*and then to keep my 160gb of space, I'd need to get that xtender, and that's no toy to install. And I used up me last 2month card to check this one out lol. Not too bad, but still a negative point.
This post has been edited by kizu7su: Apr 20 2005, 02:43 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: admiralj on March 09, 2003, 10:04:00 AM
-
Yeah just logged onto live for the first time in a week. The thing updated and i got these codes:
W: 0000-000B
X: 0000-000D
Y: 00A8-4800
Z: 0000-0000
1.0 Xbox with PCBioXX disabled. I tried logging into Live and it works perfectly.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MickeYd420 on March 09, 2003, 07:10:00 PM
-
still my x code is 0001-8005 no 1 else has that code
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Ceazer on March 10, 2003, 01:03:00 PM
-
ok ive got a v1.0 xbox with X-ecuter 2 pro and a 40g wd hard drive installed.
ive been using f: boot so all my games and evox are all on F: i jsut switched the mod off and upgraded my dash with live. it connected 1 time , said it had to update and when it finished i can no longer connect to live now.
yes i am possitive the mod was/and still is off.
w:0000-000B
x:0001-8005
Y:00A8-4800
z:0000-0000
any ideas , does it look like im banned ?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 10, 2003, 01:28:00 PM
-
anybody have a w code thats not 0000-000B?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kwan88 on May 01, 2005, 12:04:00 PM
-
Just plugged my xbox back to xlive after a 3 month delay and now I get the unable to connect to xbox live. Please check MTU and router, the below are the error codes.
W:0000-000B
X:0000-F0001
Y:00C2-03C0
Z:0000-0000
L: 0ms
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
NT:0
Any Ideas?
I have already restored my HD back to default and re-flashed the EEPROM from the one that Zokidak sent me 3 months ago.
HELP!!!!!!!!!!!!!! :grr:
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on May 01, 2005, 12:42:00 PM
-
Hi mate, since you were banned, according to your thread, you will not only need a new eeprom, but also a new virgin HD, and a new gamertag if the HD you're using isn't a STOCK hd.
Your C2 error is due to a hardware confguration missmatch. Some people can easilly fix this using enigmah video mode switcher, by changing the Video mode from NTSC to PAL and back, or viceversa, and rebooting after the change is done. But unfortunately it doesn't work all the time.
Patience, and good luck. And remember, new hd WILL be needed, along with a new gamertag if your new virgin HD isn't a stock one. Keep that in mind.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kwan88 on May 01, 2005, 04:37:00 PM
-
Thanks for the rreply,
i thought that all i need was a new EEPROM which will included a new HD key that is applied to the xbox.
that was what I did the last time, have things changed?
Regards.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on May 01, 2005, 07:33:00 PM
-
Things have changed very much mate.
Now, whenever you get on Live, your eeprom and HD serial number get married to each other. So, changing either one of them will get you banned in a matter of hours.
Changing the HD key is so far impossible, firstly because it is strongly encrypted in the FATX table of the HD itself, wich cannot be access without hacking the more strongly encrypted software that the controller uses. It has been tried, but everyone quits as soon as they realize how strong the encryption is.
Plus, once your banned, your gamertag gets flagged, meaning that if you connect to xbox live on any box with a bigger than stock HD, M$ will find it and ban that box as well.
So, with all that said, the only way, so far, to get back on Live is reduced to this 3 options:
New virgin eeprom + Virgin STOCK HD + Gamertag (Flagged or not) = XBOX Live!
or
New virgin eeprom + virgin big HD + Completley NEW gamertag = XBOX Live!
or
Buy a stock XBOX for live, and keep the modded one for fun... hard to accept... but that's how it is.
For more info on this matter, check the Marriage Theory Thread.
Good luck mate.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: CamdogXIII on May 02, 2005, 04:06:00 PM
-
no, the dvd can be moved anywhere
-
Title: Help for XYZ Live codes - See if you are banned
Post by: BlindGeep on May 04, 2005, 02:00:00 AM
-
My 120 gig hard drive i've been using for about 18 months suffered a hard disk crash, so I swapped my original hard drive back in expecting to be banned.
I downloaded all the content for the games I had, including a bunch of premium stuff I'd bought previously. I did this over the course of 2 days.
A week later I went on line to see if any mates were on Pool Shark 2. The next morning (no more than 12 hours later), I put Halo 2 in to get the auto-updates and free maps and I was banned.
Network settings stuff is:
1.00.5971.01
W: 0000-000B
X: 0000-000D
Y: 00AB-6800 (this is probably 00A8-6800, couldn't see clearly this morning when I wrote them down)
Z: 8015-190D
L: 0 ms (0ms) P: 0/0
Manual IP, manual DNS
Chip is a chameleon, in mode 4, e.g. hold eject to boot MS bios.
Chips bios is xecuter 4981.06
Booted a couple of times with chip on and tried to access live by accident, but the 4981 has always blocked me before
A couple of rogue evox files left on C:, and a mechassualt softmod file in the UDATA on E:
The hard disk in at the mo was in from before Live launched in the UK to Dec 2003, at which point I changed hard disk to the 120 gig which has now crashed, put the original hard disk back in 23/04/05, was still on live on 30/04/05, banned 01/05/05
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 04, 2005, 03:49:00 PM
-
M$ and bungie have been making their stand on halo 2, a lot of the poeple banned here are banned from halo 2. But at the same time M$ bans arent always immediate, they can take up to a week, to ban, this is a perfect example of marriage theory at work. sorry about the ban. Just get a new hdd new eeprom, and a new gamertag, youll be back up and running in no time. best of luck.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TwigFigure on May 06, 2005, 07:36:00 AM
-
This should be fine, right? I'm thinking about getting Live.
W:0000-0015
X:0000-000D
Y:00A8-4800
Z:0000-0000
I bought this XBox second hand from EB, it's a 1.1 PAL. It had not been modified before (apart from the refurbishing EB gave it) and now has a X2.6 with EvoxM8, in what ever mode it is when you hold the power button to boot the M8, tapping it or using eject to boot the regular BIOS. Thanks in advance.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bebrewer1 on March 12, 2003, 06:54:00 PM
-
guess not
just updated tonight and here are my codes
W- 0000-000B
X - 0000-F001
Y - 0000-4860
Z - 0000-0000
using a matrix with manual on/off switch on the back of the unit. after reading this thread, it looks like my Y code of 4860 is good to go but that is based off of posts from a few months back. is 4860 still considered a valid code or is it mod detected but not yet banned? thanks for the good work fuzzy!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: stoopid2001 on May 12, 2005, 07:23:00 PM
-
Ok I got-
1.00.5971.01
W: 0000 - 000B
X: 0000 - F009
Y: 00AB -6860
Z: 8015 - 190D
L: 0 ms (0ms) P : 0 / 0
I've read through a good portion of this topic and still cant figure it out. If someone could help me out...awesome.
Basically I started using XBL a few months ago with my 2.6b off with no problems. The other day it just stopped working, cant find xbl.
Thanks in advance for the help.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 12, 2005, 11:45:00 PM
-
sorry stoopid but thats a ban the 6 in the y line is a ban ie. Y:xxxx-6xxx= ban. You'll need a new eeprom(correct version for your xbox) a new hdd(large or small.) If you want to keep your old gamertag you'll need to get a small hdd (8-10 gigs) or you can get a new big hdd and get a new gamertag. Make sure not to use your old gt on an xbox with a bigger hdd, once your gt is flagged m$ scans your hdd every time you log in. best of luck .
mct the c2 error is an eeprom problem. Have you done anythig lately? The good news is its not a ban. I had the c2 error but mine was as simple as just all i had to do was switch my video mode and back again. I have seen that code before but I havent seen a solution other than getting a new eeprom, that will probably be the best way to go $10 bucks and your back on your way.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: paul_phil on May 13, 2005, 07:54:00 AM
-
I've heard about people phoning M$ up to get their gamertag changed (just say people keep calling you names or some sh1t like that) and it un-flags that gamertag
-
Title: Help for XYZ Live codes - See if you are banned
Post by: AndyBroke on May 13, 2005, 04:59:00 PM
-
I have the codes:
W:0000-000b
X:0000-f001
Y:008a-0fe0
Z:afff-0018
I get the error "Could not connect to xbox live".
I played Halo 2 online yesterday.
maybe my region changed after i played Forza today, don`t know wich region it was.
I have a pal xbox v.1.1 with x3
I am going to try to restore an old eeprom backup tomorrow
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 15, 2005, 12:17:00 AM
-
so just all of a sudden you got the cant connect error. Did you do anything like messing around with settings in your box? these are your new codes right, you didnt connect to live with those.from what ive read the afff in the z line is a pretty bad error, if restoring your eeprom doesnts work i might suggest just getting a new one.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: AndyBroke on May 15, 2005, 06:29:00 PM
-
I think i have to buy a new one, the old eeprom didn`t seem to work.
Or maybe i can go over to xlink
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 15, 2005, 10:28:00 PM
-
the big thing with xlink is cheating and lag, id stick with live, its just easier. ya just get a new eeprom and set that baby up.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on May 15, 2005, 10:37:00 PM
-
Man, the 8A error is a bitch... I spent hours trying to help a guy here with it, and it was thought that switching video modes back and forth and then rebooting it could be fixed, but not in this case.
It seems to be a big hardware misconfiguration... or the eeprom got corrupted somehow. We tried reflashing the bios, but no joy, same thing. So beats me.
If anyone knows, or has been successful in fixing this error, please, let me know.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 15, 2005, 10:51:00 PM
-
the only solution ive ever come across is just getting a new eeprom and that isnt always a fix. the c2 errors are the easy ones, from personal experience i know they can be fixed, but the 8a errors , I do agree that they are noodle scratchers. damn m$ and all their anti hacking crap. why wont they let us just have fun.
From my understanding the c2 is one of the errors that can be fixed with the video switching, the 8a is kinda a "you F'd up real bad buddy, aint no way your getting on live like that.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on May 15, 2005, 11:11:00 PM
-
Post by: eh. on March 10, 2005, 08:58:00 AM
QUOTE(Lord Magnus @ Mar 9 2005, 01:18 PM - part)
The 190D I believe means "Softmoded", but it hasn't been confirmed.
(Almost all other 190D's seem to have been have been "Soldermoded" eh.
)
Post by: eh. on March 10, 2005, 11:40:00 AM
QUOTE(eh. @ Mar 10 2005, 08:04 AM - Edit: unstuttered!)
(Almost all other 190D's seem to have been "Soldermoded" eh. )
)
Post by: TheMasGaster on March 11, 2005, 09:44:00 AM
If you have it, first try everything in this thread that doesn't involve getting a new eeprom. I did and it didn't work for me, it worked for others however so try your luck.
If you are like me and have tried it all and still can't connect, get a new eeprom, but make SURE that it is a true virgin eeprom and that it not only is unbanned, but ALSO has NEVER been on live. This is the important part. Some people sell unbanned eeproms that have been on live, but don't plan on connecting anymore, these will not work! XLive has found a way to marry the eeprom to the hdd that first uses it on live, I don't know how, but this is the only thing that worked for me and I don't see another explanation. I got a true virgin eeprom and used configmagic and I was back on right away.
Long journey, getting to the finish line with ya'll was fun. Thanks all for advice and such!
Post by: STICKY_BUD on March 11, 2005, 09:19:00 PM
Post by: Lord Magnus on March 12, 2005, 07:10:00 AM
QUOTE(STICKY_BUD @ Mar 12 2005, 04:25 AM)
1.00.5971.01
W:0000-0000
X:0000-0000
Y:0000-0000
Z:0000-0000
L:0ms(0ms) P:0/0
i want to know if it is a virgin :luv:
W:0000-0000
X:0000-0000
Y:0000-0000
Z:0000-0000
L:0ms(0ms) P:0/0
i want to know if it is a virgin :luv:
Unfortunatley, that will not tell you if it is a virgin. Those codes were obtained with your cable unplugged, hence, all the "0's".
Check on your other post about it, I came up with a suggestion about checking which Live! version they have installed.
Good Luck mate.
:beer:
Post by: skiguy411 on March 12, 2005, 08:28:00 AM
I should be able to just get a new eeprom and be able to play on live with my 120 gig hard drive correct?
Post by: TheMasGaster on March 12, 2005, 10:02:00 AM
QUOTE(skiguy411 @ Mar 12 2005, 07:58 AM)
Does a C2 error mean I have been flagged?
I should be able to just get a new eeprom and be able to play on live with my 120 gig hard drive correct?
I should be able to just get a new eeprom and be able to play on live with my 120 gig hard drive correct?
Check out the marriage theory thread before doing anything--has the 120gig been banned? You might have to get a retail xbox hdd (not too expensive, check out ebay or the buy/sell forums). When you get a new eeprom, make sure its unbanned AND has never been on live.
Post by: TheMasGaster on March 12, 2005, 10:07:00 AM
--replies that they want it in this thread, and
--has the C2 error in their XYZ's, and
--promises to report back on whether or not it worked or just came up C2 again
Again, this is a free, unbanned eeprom I'm giving away. I don't feel like selling it and just want to learn if there really is something to the mismatched configuration theory. Like I said before, I'm guessing that this eeprom was used on xbox live on a different box and, while not banned, is married to that original box. But who knows, maybe it is a configuration thing and it will solve your C2 problem.
Post by: skiguy411 on March 12, 2005, 12:18:00 PM
Here are my codes
1.00.4920.01
X:0000-F00I
Y:00C2-03C0
Z:0000-0000
This post has been edited by skiguy411: Mar 12 2005, 08:21 PM
Post by: TheMasGaster on March 12, 2005, 12:45:00 PM
Post by: skiguy411 on March 12, 2005, 01:48:00 PM
I used configmagic to write and tried to get back online. I have the same exact codes as before.
Looks like I'll have to find one that hasn't been on live before.
Post by: skiguy411 on March 12, 2005, 04:05:00 PM
Post by: TheMasGaster on March 12, 2005, 10:59:00 PM
QUOTE(skiguy411 @ Mar 12 2005, 04:11 PM)
OK I'm back on live for now! I purchased a virgin EEPROM from xbupgrade.com and recieved it a couple of hours later. Worked perfect!
Congrats man, I think we have this C2 error whooped! OP should edit the thread with the new info on solving this thing.
This post has been edited by TheMasGaster: Mar 13 2005, 07:03 AM
Post by: sidewinder33 on March 13, 2005, 06:23:00 PM
im pretty sure that i ve the same prob symptoms sound the same.
Post by: sidewinder33 on March 13, 2005, 07:05:00 PM
W: 0000-000B
X:0000-FOO1
Y:00C2-0042
Z:0000-0000
any ideas of the prob and solution
Post by: MR-T on March 13, 2005, 10:00:00 PM
QUOTE(TheMasGaster @ Mar 11 2005, 09:14 AM)
Allright folks, C2 error solved.
If you have it, first try everything in this thread that doesn't involve getting a new eeprom. I did and it didn't work for me, it worked for others however so try your luck.
If you are like me and have tried it all and still can't connect, get a new eeprom, but make SURE that it is a true virgin eeprom and that it not only is unbanned, but ALSO has NEVER been on live. This is the important part. Some people sell unbanned eeproms that have been on live, but don't plan on connecting anymore, these will not work! XLive has found a way to marry the eeprom to the hdd that first uses it on live, I don't know how, but this is the only thing that worked for me and I don't see another explanation. I got a true virgin eeprom and used configmagic and I was back on right away.
Long journey, getting to the finish line with ya'll was fun. Thanks all for advice and such!
If you have it, first try everything in this thread that doesn't involve getting a new eeprom. I did and it didn't work for me, it worked for others however so try your luck.
If you are like me and have tried it all and still can't connect, get a new eeprom, but make SURE that it is a true virgin eeprom and that it not only is unbanned, but ALSO has NEVER been on live. This is the important part. Some people sell unbanned eeproms that have been on live, but don't plan on connecting anymore, these will not work! XLive has found a way to marry the eeprom to the hdd that first uses it on live, I don't know how, but this is the only thing that worked for me and I don't see another explanation. I got a true virgin eeprom and used configmagic and I was back on right away.
Long journey, getting to the finish line with ya'll was fun. Thanks all for advice and such!
Yeah, I got another new eeprom and it started workign for me. I think that the one I was originally sold must have been married to another HD already.
Post by: sidewinder33 on March 14, 2005, 02:11:00 AM
Post by: STICKY_BUD on March 14, 2005, 09:26:00 AM
do you know how your video region got switched?
Post by: sidewinder33 on March 15, 2005, 02:37:00 AM
Post by: phantazma1 on March 03, 2003, 08:49:00 AM
"network couldn't be established"? i got an eeprom for my friend, used configmagic
"update eeprom" option, but it doesn't seem it work. is it a local issue?
it says "live not found" in the 4 tests, but i'm not sure if it's banned.
the eeprom is not banned because it's brand new
*UPDATE*
he has a Linksys NR041 modem, which on the MS page says that it doesn't support
LIVE very well...hmm... anyone have any suggestions?
Post by: Poppeseed on March 19, 2005, 08:30:00 PM
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 00C2-03C0
Z: 0000-0000
L: 0ms (0ms) p:0/0
Any Idea why i get the Xbox LIve not Found error?
Post by: sidewinder33 on March 19, 2005, 10:04:00 PM
Post by: Poppeseed on March 19, 2005, 10:46:00 PM
QUOTE(sidewinder33 @ Mar 19 2005, 10:34 PM)
Poppeseed,the first thing you should try is getting the enigmah pal/ntsc video switcher, if you switched your video settings at one time this might be your problem i had, its the simpleest way to to try and solve this problem. all i had to do was get it and then use it and i got on live just fine.
I got the Video switcher (enigmah) from the usual places, made sure it was on ntsc, and then i was like, ok this is good,
Went to boot from live, Xbox Live Not Found
EDIT: and I never switched the video settings
This post has been edited by Poppeseed: Mar 20 2005, 06:48 AM
Post by: sidewinder33 on March 20, 2005, 12:29:00 AM
Post by: Fuzzy on March 03, 2003, 11:37:00 AM
| QUOTE (phantazma1 @ Mar 3 2003, 12:49 PM) |
| are you banned if the moment you go into the LIVE dash, it says something like "network couldn't be established"? i got an eeprom for my friend, used configmagic "update eeprom" option, but it doesn't seem it work. is it a local issue? it says "live not found" in the 4 tests, but i'm not sure if it's banned. the eeprom is not banned because it's brand new *UPDATE* he has a Linksys NR041 modem, which on the MS page says that it doesn't support LIVE very well...hmm... anyone have any suggestions? |
what are your xyz codes
Post by: Poppeseed on March 20, 2005, 12:05:00 PM
QUOTE(sidewinder33 @ Mar 20 2005, 01:35 AM)
hhmmm you might have the problem the first guy had in this thread with a bad hdd copy. not really sure how to do that one but im sure some one can help you. what chip do you have, and hopw did you upgrade your hdd? I have an xenium ice chip and it has a hdd upgrade wizzard that did it all for me, im not sure if other chips have the same feature.hhmm you xyz's were different from mine so i didnt think that we had the same problem look through this thread and see if anyone else has your same xyz code and see what they did or said.
I have an X3, and i had a new hdd, made the mistake of going on live, and got banned.
SO i got a new HDD (stock) and a new EEPROM, and the first thing i did, was put in the HDD, and it had the files on there. I put a few game saves on it, then flashed the eeprom, and the only difference between the two settings was the DVD region code...Could that be it? the old was a 1, the new was a 0.
I'll look into this thread more.
Post by: phantazma1 on March 03, 2003, 12:59:00 PM
Y 008A-0FE0
Z 8015-1918
Post by: Fuzzy on March 03, 2003, 01:25:00 PM
| QUOTE (phantazma1 @ Mar 3 2003, 04:59 PM) |
| x 0000-F001 Y 008A-0FE0 Z 8015-1918 |
never seen one like that ever, your on your own kid
Post by: phantazma1 on March 03, 2003, 02:14:00 PM
a techie is gonna call me in about 2-3 days. let's see what happens.
Post by: liquidc3lls on March 23, 2005, 04:26:00 PM
is that odd
btw never been on live
Post by: sidewinder33 on March 24, 2005, 04:24:00 PM
Auto IP
Auto DNS
X:0000-F001
Y:00A84860
Z:0000-0000
Manual IP (incorrect)
Auto DNS
X:8001-0405
Y:0000-0000
Z:0000-0000
Manual IP (another incorrect one)
Auto DNS
X:8001-1005
Y:0000-0000
Z:0000-0000
Manual IP (correct)
Auto DNS
X:0001-8005
Y:00A8-4800
Z:0000-0000
Auto IP
Manual DNS( changed the stock value by one number)
X:0000-F009
Y:00A8-4860
Z:0000-0000
Manual IP (correct)
Manual DNS (stock setting)
X:0000-000D
Y:00A8-4800
Z:0000-0000
hope those help, and before, I had a C@ problem but fixed it with the enigmah video switcher. i believe that the codes for that were
X:0000-000D
Y:00C2-0002
Z:0000-0000
I switched my video mode to pal in my Ice OS and then put it back to Ntsc and i got this.
X:0000-000D
Y:00C2-0062
Z:0000-0000
I was coming through a Netgear router with the ip and dns on auto.
Post by: Rasalibra on March 25, 2005, 09:14:00 PM
X:0000-f001
Y:00C2-01E4
Z:AFFF-0018
also how and is it possible to convert a 1.0 eeprom to a 1.1 eeprom
Post by: sidewinder33 on March 26, 2005, 07:40:00 PM
This post has been edited by sidewinder33: Mar 27 2005, 03:44 AM
Post by: DarkBlade14 on March 27, 2005, 12:58:00 PM
My XYZ codes are:
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
HELP!
Post by: DuckOfDeath on March 27, 2005, 08:37:00 PM
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 00A8-6860
Z: 8015-190D
L: 0ms (0ms)
P: 0/0
MT: 1(0015-00F0)
IC: 1(0015-00F0)
NT: 0
I have another box, one I use soley for live. It did have a chip in it at one time, (I purchased it broken, needed the chip to fix it up). I only use this box for live now, and it is not banned. It is stock with the stock samsung dvd it came with, and the stock hard drive it came with. Here's the info on that one.
1.00.5971.01
W: 0800-000B
X: 0080-F001
Y: 00A8-4860
Z: 0000-0000
L: 63ms (64ms)
P: 16/25
MT: 1(0015-00F0)
IC: 1(8007-274C)
NT: 1
-Duck!
Post by: sidewinder33 on March 27, 2005, 09:37:00 PM
QUOTE(DarkBlade14 @ Mar 27 2005, 12:04 PM)
Hey can someone help me out? Last Week I was on Live but then all of a sudden, i try to connect to live it says its not found, and I just got another eeprom put in.
My XYZ codes are:
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
HELP!
My XYZ codes are:
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
HELP!
hhmm you arent banned but your hardware has been messed with. both the 8A and the AFFF codes tell me that, but thats about all they tell me have you ever switched your video mode? did you copy your hdd correctly, did you buy your box new or used, do you know where it was originally made to run in i.e. europe or usa. i believe that you get this error from just messing with your eeprom either on purpose or not.
Post by: DarkBlade14 on March 28, 2005, 12:09:00 AM
Quote
sidewinder33 Posted Today, 04:07 AM
QUOTE(DarkBlade14 @ Mar 27 2005, 12:04 PM)
Hey can someone help me out? Last Week I was on Live but then all of a sudden, i try to connect to live it says its not found, and I just got another eeprom put in.
My XYZ codes are:
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
HELP!
hhmm you arent banned but your hardware has been messed with. both the 8A and the AFFF codes tell me that, but thats about all they tell me have you ever switched your video mode? did you copy your hdd correctly, did you buy your box new or used, do you know where it was originally made to run in i.e. europe or usa. i believe that you get this error from just messing with your eeprom either on purpose or not.
I haven't ever switched my video mode, and a "pro" copied my hdd. My xbox was bought new and it was bought in Canada (where i am now), and the "pro" was the one who put a new eeprom in. anything i can do to fix this problem or shuold i take it bak???
Post by: bromhex on March 28, 2005, 10:54:00 PM
y: 00A8-4860
z: 0000-0000
L: 59ms(63ms)
P: 20/20
and when i press the ok button another screen pops up and i get this:
MT 1(0015-00F0)
IC 1(0015-00F0)
NT 1
xbox 1.6 with samsung drive, original hdd,and xtra?
Post by: sidewinder33 on March 29, 2005, 03:51:00 PM
This post has been edited by sidewinder33: Mar 29 2005, 11:53 PM
Post by: DarkBlade14 on March 29, 2005, 05:42:00 PM
QUOTE(sidewinder33 @ Mar 29 2005, 10:21 PM)
hmm you dont really have any reason to not be able to get on. Was the eeprom the correct version for your xbox and was it the correct mode ie ntsc (since your in north america.) ask the "pro" if the eeprom was the right version and if that still doesnt give us an answer...... ? if everything your telling me is correct, then it should be good to go. ask him if he locked the hdd correctly because that can cause this problem too.
Well the this guy gave the xbox back, live was working for like two or three days before this happened, so i dunno i think everything should be ok.
Post by: DarkBlade14 on March 30, 2005, 01:15:00 PM
Post by: thebroken on March 30, 2005, 02:54:00 PM
ThebRokEN
Post by: Morlok8k on March 30, 2005, 02:44:00 PM
after reading this thread, i unlocked my HDD, then i used the Enginmah Videodisc Switcher. It was set to Ntsc, so i switched it to PAL, waited a few seconds, then swtiched it back to NTSC. I rebooted, then relocked my HDD, and my problems were gone!
my xyz codes before:
X:0000-F001
Y:00C2-0062
Z:0000-0000
my zyx codes after:
X:0000-F001
Y:00A8-4860
Z:0000-0000
Post by: sidewinder33 on March 30, 2005, 04:50:00 PM
QUOTE(DarkBlade14 @ Mar 29 2005, 04:12 PM)
Well the this guy gave the xbox back, live was working for like two or three days before this happened, so i dunno i think everything should be ok.
inbetween when you got it back and when it stoped getting on live what did you do. ie. "backup" games? just play on live?
Morlok i did the same thing and had the same codes, we got off easy :D
This post has been edited by sidewinder33: Mar 31 2005, 12:56 AM
Post by: DarkBlade14 on March 31, 2005, 01:23:00 PM
Post by: sidewinder33 on March 31, 2005, 04:57:00 PM
this is a stumper, not really sure what to do.
Post by: DarkBlade14 on March 31, 2005, 08:18:00 PM
Post by: Morlok8k on April 02, 2005, 07:42:00 PM
QUOTE(sidewinder33 @ Mar 30 2005, 10:20 PM)
Morlok i did the same thing and had the same codes, we got off easy :D
Yes, and im glad that that hassle is over!
i still have no clue to how it got that way though... oh well.
Post by: TB_88 on March 06, 2003, 07:59:00 AM
So now u will have a w code and just not X Y Z codes...
What does the W code mean???
Post by: RiceCake on March 06, 2003, 10:16:00 AM
Here it is, my W:
-=-=-=-=-=-=-=-=-
1.00.5335.01
W: 000-000B
X: 000-000D
Y: 00A8-4800
Z: 000-0000
UL: 8310KB DL: 5521KB
L: 66MS (73MS) P: 20/21
Post by: Fuzzy on March 06, 2003, 03:57:00 PM
Post by: RiceCake on March 06, 2003, 04:13:00 PM
Post by: Fuzzy on March 06, 2003, 05:29:00 PM
Post by: bearauto on March 06, 2003, 09:03:00 PM
X: 0000-F001
Y: 00A8-4840
Z: 0000-0000
OK, those are my codes...if you don't already know, my xbox accessed live with the modchip ON, inadvertently, and I expect to be banned within a week or so...thus, my wxyz codes should change accordingly.
Forgot to mention, these codes were taken AFTER accessing LIVE with modchip ON. As of now, I can still access LIVE, but as I mentioned, that should change within a week's time.
Post by: reece on April 09, 2005, 07:16:00 PM
my 2 cents.
thank you to everyone for your posts and research, it gave me a great idea of where i stood in regards to xbl.
modded my box nearly a year ago with a xenium ice + 250gig hdd. (important to note that i backed up my eeprom on instillation)
over the year my eeprom was messed with several times due to me just idleing playing with no idea + setting up soft mods for mates and having to change my hdd lock key.
When i finally decided to go live (was given a 12mth subscription) i did everything i could to hide all modded files from MS... dont know if it was needed but i moved all non MS stuff off c and e and left them as stock.
I was refering to xbox-scene the whole time and was hoping that the marrige theory was right as i didnt want to have to take my chip off everytime i connected (pain in ass).
When i first tried to log on and register i got the codes
x 0000 - F001
y 00c2 - 01E4
z AFFF - 0018
and as previously stated this refers to an eeprom issue and not a banning.
to me its MSs way of saying that they can see something is wrong but maybe they cant do anything about it..
that was when i started to read this thread and realised what it was...
i booted the xenurm OS and reverted to saved eeprom.. woo hoo. everything was fine
this was about 3 or 4 weeks ago now and no banning.
im still running
v1.1
xenium ice chip
250gig hdd
several diff dashboards (obviously i run live with the chip not booted and there for use the ms dash for live)
thanks again xbox-scene for giving me the confidence to have a play.
Post by: kizu7su on April 16, 2005, 10:47:00 AM
Using hdunlock/atapwd I unlocked the drive with configmagic and relocked it with the win98 boot disk, but that apparently didn't change anything at all. Same codes as follows, before and after atapwd:
0000 - 000B
0000 - F001
00C2 - 03E0
0000 - 0000
those are all the steps i took. hope a lil confirmation can come from them.
*I will try to mess with settings and give different codes based on manual IP's and messed up info to see what I get. I've wasted my morning with atapwd with no result and ran out of time =(
kizu
Post by: kizu7su on April 16, 2005, 01:00:00 PM
I am curious whether or not the replacement eeprom I purchased was a PAL version or if there was any difference in the xbox version (haven't checked mine but I got it when xbox live luanched, so it's about 2-3 years old now I suppose). Would there be any need for me to purchase yet another eeprom to try, or has anyone tried that (searched, didn't return anything conclusive) and can advise one way or the other?
kizu
Post by: sidewinder33 on April 16, 2005, 06:14:00 PM
Post by: kizu7su on April 16, 2005, 08:44:00 PM
Post by: MickeYd420 on March 08, 2003, 12:46:00 PM
x:0001-8005
i was just wondering cuz u said they all should be zero. I have a unbanned xbox with a x2 lite in it. LMK
Post by: sidewinder33 on April 17, 2005, 11:43:00 AM
Post by: kizu7su on April 17, 2005, 08:32:00 PM
I guess we'll see...just ordered one =)
kizu
Post by: sidewinder33 on April 17, 2005, 09:07:00 PM
Post by: reece on April 19, 2005, 04:08:00 AM
Has anyone had any troubles going live since getting the 1.1 update for halo 2?
w: 0000 - 000B
x: 0000 - 000D
y: 0088 - 1C00
z: 0000 - 0000
Am thinking (wishfull thinking?) it may be just the network is overloaded with ppl getting the new maps today, but i cant connect outside of live either.
havent tried another live enabled game yet. just thought id throw it out there
Post by: Lord Magnus on April 19, 2005, 07:29:00 AM
QUOTE(reece @ Apr 19 2005, 09:38 AM)
Hey guys,
Has anyone had any troubles going live since getting the 1.1 update for halo 2?
w: 0000 - 000B
x: 0000 - 000D
y: 0088 - 1C00
z: 0000 - 0000
Am thinking (wishfull thinking?) it may be just the network is overloaded with ppl getting the new maps today, but i cant connect outside of live either.
havent tried another live enabled game yet. just thought id throw it out there
Has anyone had any troubles going live since getting the 1.1 update for halo 2?
w: 0000 - 000B
x: 0000 - 000D
y: 0088 - 1C00
z: 0000 - 0000
Am thinking (wishfull thinking?) it may be just the network is overloaded with ppl getting the new maps today, but i cant connect outside of live either.
havent tried another live enabled game yet. just thought id throw it out there
They did say it was going to be a slow transition somewhow...
From the bungie.net website:
QUOTE
Q- Will there be any other ramifications from the autoupdate?
A- Yes, notably, you will find lag is actually a little worse for a couple of days. After your system is autoupdated, it "retrains" the software responsible for finding the best connection speeds. That means that your first few sessions will get progressively better until your Xbox is fully conditioned to find the best network speeds. So don't panic. You will also notice longer loading times initially, as maps and other data are re-cached onto your Xbox. Those will vanish rapidly.
A- Yes, notably, you will find lag is actually a little worse for a couple of days. After your system is autoupdated, it "retrains" the software responsible for finding the best connection speeds. That means that your first few sessions will get progressively better until your Xbox is fully conditioned to find the best network speeds. So don't panic. You will also notice longer loading times initially, as maps and other data are re-cached onto your Xbox. Those will vanish rapidly.
Edit: Typos
This post has been edited by Lord Magnus: Apr 19 2005, 02:31 PM
Post by: Ceth on March 08, 2003, 09:43:00 PM
W: 0000-000B
X: 0000-F001
Y: 00A8-4840
Z: 0000-0000
Xbox v1.0 with matrix disabled.
Post by: kizu7su on April 19, 2005, 07:05:00 PM
here are my new XYZ codes:
W 0000-000B
X 0000-000D
Y 00A8-6800
Z 8015-190D
hope those help.
kizu
Post by: Lord Magnus on April 19, 2005, 09:33:00 PM
QUOTE(kizu7su @ Apr 20 2005, 01:11 AM)
well got the new eeprom, didn't swap the hdd or anything, don't have the cash for another 160gb. unbanned for a day, rebanned with the 'may have been modified' lol.
here are my new XYZ codes:
W 0000-000B
X 0000-000D
Y 00A8-6800
Z 8015-190D
hope those help.
kizu
here are my new XYZ codes:
W 0000-000B
X 0000-000D
Y 00A8-6800
Z 8015-190D
hope those help.
kizu
Yeah mate... it sucks.
A new HD is needed unfortunately... Have you thought about swaping it with one on your PC or something like that?
Good luck.
Post by: sidewinder33 on April 19, 2005, 11:50:00 PM
Post by: kizu7su on April 20, 2005, 07:30:00 AM
I had been going on live pretty regularly up until the big h2 ban. I got this box online a good 2-4 weeks before h2 came out.
And no clue if my PC hdd supports locking...I could look into that though.
I have a friend who has extra stock drives and such, but when I initially changed my eeprom, it wouldn't accept my stock drive back in the system when I was trying things out. I wouldn't know how to put his new stock drive in mine, short of sending him one of my old eeproms so he can upgrade that with ConfigMagic, mail it to me, and hopefully it'll work with mine and I can flash it with the new.
Would that work?
-kizu
*and then to keep my 160gb of space, I'd need to get that xtender, and that's no toy to install. And I used up me last 2month card to check this one out lol. Not too bad, but still a negative point.
This post has been edited by kizu7su: Apr 20 2005, 02:43 PM
Post by: admiralj on March 09, 2003, 10:04:00 AM
W: 0000-000B
X: 0000-000D
Y: 00A8-4800
Z: 0000-0000
1.0 Xbox with PCBioXX disabled. I tried logging into Live and it works perfectly.
Post by: MickeYd420 on March 09, 2003, 07:10:00 PM
Post by: Ceazer on March 10, 2003, 01:03:00 PM
ive been using f: boot so all my games and evox are all on F: i jsut switched the mod off and upgraded my dash with live. it connected 1 time , said it had to update and when it finished i can no longer connect to live now.
yes i am possitive the mod was/and still is off.
w:0000-000B
x:0001-8005
Y:00A8-4800
z:0000-0000
any ideas , does it look like im banned ?
Post by: Fuzzy on March 10, 2003, 01:28:00 PM
Post by: kwan88 on May 01, 2005, 12:04:00 PM
W:0000-000B
X:0000-F0001
Y:00C2-03C0
Z:0000-0000
L: 0ms
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
NT:0
Any Ideas?
I have already restored my HD back to default and re-flashed the EEPROM from the one that Zokidak sent me 3 months ago.
HELP!!!!!!!!!!!!!! :grr:
Post by: Lord Magnus on May 01, 2005, 12:42:00 PM
QUOTE(kwan88 @ May 1 2005, 05:34 PM)
Just plugged my xbox back to xlive after a 3 month delay and now I get the unable to connect to xbox live. Please check MTU and router, the below are the error codes.
W:0000-000B
X:0000-F0001
Y:00C2-03C0
Z:0000-0000
L: 0ms
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
NT:0
Any Ideas?
I have already restored my HD back to default and re-flashed the EEPROM from the one that Zokidak sent me 3 months ago.
HELP!!!!!!!!!!!!!! :grr:
W:0000-000B
X:0000-F0001
Y:00C2-03C0
Z:0000-0000
L: 0ms
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
NT:0
Any Ideas?
I have already restored my HD back to default and re-flashed the EEPROM from the one that Zokidak sent me 3 months ago.
HELP!!!!!!!!!!!!!! :grr:
Hi mate, since you were banned, according to your thread, you will not only need a new eeprom, but also a new virgin HD, and a new gamertag if the HD you're using isn't a STOCK hd.
Your C2 error is due to a hardware confguration missmatch. Some people can easilly fix this using enigmah video mode switcher, by changing the Video mode from NTSC to PAL and back, or viceversa, and rebooting after the change is done. But unfortunately it doesn't work all the time.
Patience, and good luck. And remember, new hd WILL be needed, along with a new gamertag if your new virgin HD isn't a stock one. Keep that in mind.
Post by: kwan88 on May 01, 2005, 04:37:00 PM
i thought that all i need was a new EEPROM which will included a new HD key that is applied to the xbox.
that was what I did the last time, have things changed?
Regards.
Post by: Lord Magnus on May 01, 2005, 07:33:00 PM
QUOTE(kwan88 @ May 1 2005, 10:07 PM)
Thanks for the rreply,
i thought that all i need was a new EEPROM which will included a new HD key that is applied to the xbox.
that was what I did the last time, have things changed?
Regards.
i thought that all i need was a new EEPROM which will included a new HD key that is applied to the xbox.
that was what I did the last time, have things changed?
Regards.
Things have changed very much mate.
Now, whenever you get on Live, your eeprom and HD serial number get married to each other. So, changing either one of them will get you banned in a matter of hours.
Changing the HD key is so far impossible, firstly because it is strongly encrypted in the FATX table of the HD itself, wich cannot be access without hacking the more strongly encrypted software that the controller uses. It has been tried, but everyone quits as soon as they realize how strong the encryption is.
Plus, once your banned, your gamertag gets flagged, meaning that if you connect to xbox live on any box with a bigger than stock HD, M$ will find it and ban that box as well.
So, with all that said, the only way, so far, to get back on Live is reduced to this 3 options:
New virgin eeprom + Virgin STOCK HD + Gamertag (Flagged or not) = XBOX Live!
or
New virgin eeprom + virgin big HD + Completley NEW gamertag = XBOX Live!
or
Buy a stock XBOX for live, and keep the modded one for fun... hard to accept... but that's how it is.
For more info on this matter, check the Marriage Theory Thread.
Good luck mate.
Post by: CamdogXIII on May 02, 2005, 04:06:00 PM
QUOTE
Hi guys,
just curious is the dvd married to the eeprom too? i just upgraded my dvd and noticed that it is updated in the eeprom too...
reece
just curious is the dvd married to the eeprom too? i just upgraded my dvd and noticed that it is updated in the eeprom too...
reece
no, the dvd can be moved anywhere
Post by: BlindGeep on May 04, 2005, 02:00:00 AM
I downloaded all the content for the games I had, including a bunch of premium stuff I'd bought previously. I did this over the course of 2 days.
A week later I went on line to see if any mates were on Pool Shark 2. The next morning (no more than 12 hours later), I put Halo 2 in to get the auto-updates and free maps and I was banned.
Network settings stuff is:
1.00.5971.01
W: 0000-000B
X: 0000-000D
Y: 00AB-6800 (this is probably 00A8-6800, couldn't see clearly this morning when I wrote them down)
Z: 8015-190D
L: 0 ms (0ms) P: 0/0
Manual IP, manual DNS
Chip is a chameleon, in mode 4, e.g. hold eject to boot MS bios.
Chips bios is xecuter 4981.06
Booted a couple of times with chip on and tried to access live by accident, but the 4981 has always blocked me before
A couple of rogue evox files left on C:, and a mechassualt softmod file in the UDATA on E:
The hard disk in at the mo was in from before Live launched in the UK to Dec 2003, at which point I changed hard disk to the 120 gig which has now crashed, put the original hard disk back in 23/04/05, was still on live on 30/04/05, banned 01/05/05
Post by: sidewinder33 on May 04, 2005, 03:49:00 PM
Post by: TwigFigure on May 06, 2005, 07:36:00 AM
W:0000-0015
X:0000-000D
Y:00A8-4800
Z:0000-0000
I bought this XBox second hand from EB, it's a 1.1 PAL. It had not been modified before (apart from the refurbishing EB gave it) and now has a X2.6 with EvoxM8, in what ever mode it is when you hold the power button to boot the M8, tapping it or using eject to boot the regular BIOS. Thanks in advance.
Post by: bebrewer1 on March 12, 2003, 06:54:00 PM
just updated tonight and here are my codes
W- 0000-000B
X - 0000-F001
Y - 0000-4860
Z - 0000-0000
using a matrix with manual on/off switch on the back of the unit. after reading this thread, it looks like my Y code of 4860 is good to go but that is based off of posts from a few months back. is 4860 still considered a valid code or is it mod detected but not yet banned? thanks for the good work fuzzy!
Post by: stoopid2001 on May 12, 2005, 07:23:00 PM
1.00.5971.01
W: 0000 - 000B
X: 0000 - F009
Y: 00AB -6860
Z: 8015 - 190D
L: 0 ms (0ms) P : 0 / 0
I've read through a good portion of this topic and still cant figure it out. If someone could help me out...awesome.
Basically I started using XBL a few months ago with my 2.6b off with no problems. The other day it just stopped working, cant find xbl.
Thanks in advance for the help.
Post by: sidewinder33 on May 12, 2005, 11:45:00 PM
mct the c2 error is an eeprom problem. Have you done anythig lately? The good news is its not a ban. I had the c2 error but mine was as simple as just all i had to do was switch my video mode and back again. I have seen that code before but I havent seen a solution other than getting a new eeprom, that will probably be the best way to go $10 bucks and your back on your way.
Post by: paul_phil on May 13, 2005, 07:54:00 AM
Post by: AndyBroke on May 13, 2005, 04:59:00 PM
W:0000-000b
X:0000-f001
Y:008a-0fe0
Z:afff-0018
I get the error "Could not connect to xbox live".
I played Halo 2 online yesterday.
maybe my region changed after i played Forza today, don`t know wich region it was.
I have a pal xbox v.1.1 with x3
I am going to try to restore an old eeprom backup tomorrow
Post by: sidewinder33 on May 15, 2005, 12:17:00 AM
Post by: AndyBroke on May 15, 2005, 06:29:00 PM
Or maybe i can go over to xlink
Post by: sidewinder33 on May 15, 2005, 10:28:00 PM
Post by: Lord Magnus on May 15, 2005, 10:37:00 PM
It seems to be a big hardware misconfiguration... or the eeprom got corrupted somehow. We tried reflashing the bios, but no joy, same thing. So beats me.
If anyone knows, or has been successful in fixing this error, please, let me know.
Post by: sidewinder33 on May 15, 2005, 10:51:00 PM
From my understanding the c2 is one of the errors that can be fixed with the video switching, the 8a is kinda a "you F'd up real bad buddy, aint no way your getting on live like that.
Post by: Lord Magnus on May 15, 2005, 11:11:00 PM
QUOTE(sidewinder33 @ May 16 2005, 04:57 AM)
From my understanding the c2 is one of the errors that can be fixed with the video switching, the 8a is kinda a "you F'd up real bad buddy, aint no way your getting on live like that.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: herbtv on May 16, 2005, 10:39:00 AM
-
Post by: herbtv on May 16, 2005, 10:39:00 AM
QUOTE(sidewinder33 @ May 15 2005, 06:23 AM)
so just all of a sudden you got the cant connect error. Did you do anything like messing around with settings in your box? these are your new codes right, you didnt connect to live with those.from what ive read the afff in the z line is a pretty bad error, if restoring your eeprom doesnts work i might suggest just getting a new one.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 16, 2005, 11:12:00 PM
-
sounds like your eeprom got corrupted somehow, the best route and the only one ive seen that can possibly fix this problem, is just by getting a new eeprom
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ruffles_x on March 13, 2003, 04:11:00 PM
-
i also got that x value
W:0000-000B
X:0001-8005
Y:00A8-4800
Z:0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Wargen on March 13, 2003, 04:17:00 PM
-
The help button is before pressing Y...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: herbtv on May 17, 2005, 01:11:00 PM
-
How does it get corrupted? Since I purchased the current eeprom and updated it, could it have been sold again to someone else?
I also used config magic, is it likely that the locking of the HD with the TEAMASSEMBLY master password could be the culprit? It seems stange that people are having these errors right after another Halo2 update (maps and v1.1) and/or Forza release.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 13, 2003, 05:38:00 PM
-
Begins with a four worry no more...ok that was gay, your fine
-
Title: Help for XYZ Live codes - See if you are banned
Post by: inder on March 14, 2003, 03:18:00 AM
-
YES - UK, v1.1.
W 0000-0013
X 0000-002D
Y 00A8-4800
Z 0000-0000
its working, but am i safe for future, or is it one of those mod detected codes or are you unsure atm?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 19, 2005, 11:37:00 PM
-
a few things can do it its not really, anything you do it just happens sometimes. Mucking with setting randomly changing things also does it.
skiguy the 8a error is the same thing that herbtv is going through, the only thing ive seen that has ever fixed the problem is by getting a new eeprom. its not really a fix bt it can work, if it doesnt then something in your xbox isnt right, whats wrong is anybodies guess.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: AndyBroke on May 21, 2005, 02:16:00 PM
-
I also got the AFFF error after playing forza.
looks like MS has got a new anti hacking tool
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 22, 2005, 01:18:00 AM
-
the afff error is just a mismatching eeprom error, either the hardware isnt all from the same version, or the eeprom is corrupted, like it says on the first page its usually from messing with your video mode, but if you didnt, then your eeprom is probably corrupted. if you have a back up of the original one you can try that, the only thing ive ever seen to even give a chance of fixing the 8a error, (which because of the afff im assuming you have) is by getting a new eeprom , if you still get te eror after that thensomething on the hardware end isnt matching up correctly and your problem gets a bit tougher.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ludicrous50 on May 23, 2005, 03:02:00 PM
-
BTW I have never been banned and am going to be creating a new account on xbox live. I also have a upgraded hdd already installed. Wil i still need a new hdd?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 23, 2005, 04:11:00 PM
-
no your good the 8a code isnt a ban, so if its a software problem then you should be good.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ludicrous50 on May 23, 2005, 05:51:00 PM
-
Alright cool, hopefully someone can figure out what exactly needs to be done in order to get connected again. So far I have had no lcuk trying many differnt things to connect.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ludicrous50 on May 26, 2005, 12:38:00 PM
-
Just a quick question. Instead of messing around and shit, could i just get a virgin eeprom and load it up. Cause i'm planning on gettting a new gamertag and i'm usin a bid hdd. Anyone know if i could just do this instead? It ould save a lot of hassle.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 26, 2005, 03:47:00 PM
-
getting a new eeprom is the only thing ive seen take the 8a error away.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 15, 2003, 08:30:00 AM
-
it looks ok, i dunno maybe the w code has soemthing to do with the region so we cant use different region lives
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ericgandhi on May 27, 2005, 10:58:00 AM
-
when i troubleshoot my connection, everything is fine except i get the xbox live not found error at the end. xbox live was working fine for me earlier. also, my xbox live account just seemed to be gone when i looked in my dashboard this morning. now unless i or someone else accidently erased it, this is strange. what can i do to fix my xbox live? please help me. here is my wxyz info.
W: 0000 - 000B
X: 0001 - 8005
Y: 00C2 - 0380
Z: 0000 - 0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ericgandhi on May 27, 2005, 11:53:00 AM
-
i tried that PAL thing but it didnt work. i guess the next thing to try will be hooking the hard drive up to my computer or whatever. does anyone have a good step by step on how to go about doing that? i know how to hook my HD up to my PC and everything, but what do I do after that when Fuzzy talks about going through the whole locking/liveinfo procedure again? also, i replaced that little mini board that is inside the xbox (the one the controller ports plug into) with one from a friend's xbox because mine was messed up or something and wasnt detecting the last two controllers. could this be an issue because i introduced hardware from another xbox?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on May 27, 2005, 06:17:00 PM
-
that could be a problem, the c2 error tells us that something isnt matching what it thinks it needs, but i dont know if the controller board that you're speaking of does anything other than just make connections, you knwo not like when the xbox boots up it doesnt run to the board and ask for its id. I think its just prettymuch wires, but then again it could be a smart board, who knows. do you have a backup of your eeprom before it gave you the c2 error?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ericgandhi on May 28, 2005, 11:13:00 AM
-
Post by: sidewinder33 on May 16, 2005, 11:12:00 PM
Post by: ruffles_x on March 13, 2003, 04:11:00 PM
| QUOTE (MickeYd420 @ Mar 10 2003, 03:10 AM) |
| still my x code is 0001-8005 no 1 else has that code |
i also got that x value
W:0000-000B
X:0001-8005
Y:00A8-4800
Z:0000-0000
Post by: Wargen on March 13, 2003, 04:17:00 PM
| QUOTE (shanafan @ Feb 15 2003, 03:04 PM) | ||
I just press Y when the four tests are done. Is there now a help button? I hardly ever use Live, expect for NBA2K3 roster updates |
The help button is before pressing Y...
Post by: herbtv on May 17, 2005, 01:11:00 PM
I also used config magic, is it likely that the locking of the HD with the TEAMASSEMBLY master password could be the culprit? It seems stange that people are having these errors right after another Halo2 update (maps and v1.1) and/or Forza release.
Post by: Fuzzy on March 13, 2003, 05:38:00 PM
| QUOTE (bebrewer1 @ Mar 12 2003, 10:54 PM) |
| guess not just updated tonight and here are my codes W- 0000-000B X - 0000-F001 Y - 0000-4860 Z - 0000-0000 using a matrix with manual on/off switch on the back of the unit. after reading this thread, it looks like my Y code of 4860 is good to go but that is based off of posts from a few months back. is 4860 still considered a valid code or is it mod detected but not yet banned? thanks for the good work fuzzy! |
Begins with a four worry no more...ok that was gay, your fine
Post by: inder on March 14, 2003, 03:18:00 AM
| QUOTE (Fuzzy @ Mar 10 2003, 10:28 PM) |
| anybody have a w code thats not 0000-000B? |
YES - UK, v1.1.
W 0000-0013
X 0000-002D
Y 00A8-4800
Z 0000-0000
its working, but am i safe for future, or is it one of those mod detected codes or are you unsure atm?
Post by: sidewinder33 on May 19, 2005, 11:37:00 PM
skiguy the 8a error is the same thing that herbtv is going through, the only thing ive seen that has ever fixed the problem is by getting a new eeprom. its not really a fix bt it can work, if it doesnt then something in your xbox isnt right, whats wrong is anybodies guess.
Post by: AndyBroke on May 21, 2005, 02:16:00 PM
looks like MS has got a new anti hacking tool
Post by: sidewinder33 on May 22, 2005, 01:18:00 AM
Post by: ludicrous50 on May 23, 2005, 03:02:00 PM
Post by: sidewinder33 on May 23, 2005, 04:11:00 PM
Post by: ludicrous50 on May 23, 2005, 05:51:00 PM
Post by: ludicrous50 on May 26, 2005, 12:38:00 PM
Post by: sidewinder33 on May 26, 2005, 03:47:00 PM
Post by: Fuzzy on March 15, 2003, 08:30:00 AM
Post by: ericgandhi on May 27, 2005, 10:58:00 AM
W: 0000 - 000B
X: 0001 - 8005
Y: 00C2 - 0380
Z: 0000 - 0000
Post by: ericgandhi on May 27, 2005, 11:53:00 AM
Post by: sidewinder33 on May 27, 2005, 06:17:00 PM
Post by: ericgandhi on May 28, 2005, 11:13:00 AM
QUOTE(sidewinder33 @ May 27 2005, 09:28 PM)
that could be a problem, the c2 error tells us that something isnt matching what it thinks it needs, but i dont know if the controller board that you're speaking of does anything other than just make connections, you knwo not like when the xbox boots up it doesnt run to the board and ask for its id. I think its just prettymuch wires, but then again it could be a smart board, who knows. do you have a backup of your eeprom before it gave you the c2 error?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ericgandhi on May 29, 2005, 04:45:00 PM
-
i took my HD out and put my old one back in but it didnt do anything. what exactly should i do? im not sure what to do about this C2 error. thanks in advance.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TwigFigure on June 04, 2005, 04:06:00 PM
-
You'lll likely need a new HDD. I don't think it matters if it's stock or not.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 04, 2005, 07:51:00 PM
-
your xyz codes are all the numbers they give you the first four and the last four, the c2 error is more than likely from the eeprom, read the first post on this thread to see some solutions, If you didn't change your banned hdd out then you probably got banned again. the mtu is on your router that has nothing to do with your hdd, anyways until i see your full xyz codes im gonna say you need a new hdd, and maybe a new eeprom, post your full xyz codes and we'll see what is the problem.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bigpopaz69 on June 04, 2005, 08:40:00 PM
-
thouse are all the codes except the 1.00.5971.01 code
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 04, 2005, 10:23:00 PM
-
The c2 error isnt a bad thing, have you tried using the enigmah video switcher, to switch the video mode or have you checked to see if the eeprom had the same dvd region? check all of them also have you changed anything other than your hdd and eeprom? i.e. dvd, and bit of hardware other than the hdd.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 05, 2005, 12:00:00 PM
-
before you start trying to get on live you need to change your hdd if you get on with your old banned one then you'll get banned again. you need to change it to pal and then back to ntsc not just load ntsc, also make sure that the dvd region adn all the other regions with the eeprom match where you are.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: astrophong on June 05, 2005, 06:24:00 PM
-
I have an XBox where it won't let me connect to Live, but doesn't give me the modified hardware/software error.
The box was never connected to Live before the installation of the new hard drive and mod chip (or after). I used Norton Ghost to clone the original drive to a WD 120G drive.
I then used Config Magic to lock the drive and EvoX to create the F: drive (via format command).
I'm in the US and my region settings are set to NTSC - Region 1, which should be correct.
Everything looks kosher, but I still can't connect to live when I launch with my mod chip switched off.
My WXYZ codes are as follows:
0000 - 000B (W)
0000 - 000D (X)
008A - 0F80 (Y)
AFFF - 0018 (Z)
As far as my Gamer Tag goes, I was logged into it a while back when I accidently logged onto Live with a XBox I had just modded (forgot to turn off auto connect - damn the luck). I don't know if this is a factor or if using a new GT would help.
I'm open to any good ideas, if anyone has any suggestions. I was thinking about restoring my old EEPROM and redoing the drive, but I didn't see how that would help. I'm also stuck not knowing if my drive is married to my Serial Number...
thnx
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 05, 2005, 06:37:00 PM
-
damn man the 8a is a toughy to solve the only thing ive ever seen resolve it is a new eeprom. Since you have an eeprom backup try restoring that first, the 8a is a typical corrupted eeprom message. The gamertag can easily get you banned. If your using a flagged gamertag with a lagre hdd on live then its a ban. If your gt is flagged then m$ scans your hdd for size, if its not stock 8-10 gig then its a ban. But the 8a error isnt a ban, try restoring your eeprom ,if that doesnt wokr try a new eeprom.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: astrophong on June 05, 2005, 07:47:00 PM
-
Post by: ericgandhi on May 29, 2005, 04:45:00 PM
Post by: TwigFigure on June 04, 2005, 04:06:00 PM
Post by: sidewinder33 on June 04, 2005, 07:51:00 PM
Post by: bigpopaz69 on June 04, 2005, 08:40:00 PM
Post by: sidewinder33 on June 04, 2005, 10:23:00 PM
Post by: sidewinder33 on June 05, 2005, 12:00:00 PM
Post by: astrophong on June 05, 2005, 06:24:00 PM
The box was never connected to Live before the installation of the new hard drive and mod chip (or after). I used Norton Ghost to clone the original drive to a WD 120G drive.
I then used Config Magic to lock the drive and EvoX to create the F: drive (via format command).
I'm in the US and my region settings are set to NTSC - Region 1, which should be correct.
Everything looks kosher, but I still can't connect to live when I launch with my mod chip switched off.
My WXYZ codes are as follows:
0000 - 000B (W)
0000 - 000D (X)
008A - 0F80 (Y)
AFFF - 0018 (Z)
As far as my Gamer Tag goes, I was logged into it a while back when I accidently logged onto Live with a XBox I had just modded (forgot to turn off auto connect - damn the luck). I don't know if this is a factor or if using a new GT would help.
I'm open to any good ideas, if anyone has any suggestions. I was thinking about restoring my old EEPROM and redoing the drive, but I didn't see how that would help. I'm also stuck not knowing if my drive is married to my Serial Number...
thnx
Post by: sidewinder33 on June 05, 2005, 06:37:00 PM
Post by: astrophong on June 05, 2005, 07:47:00 PM
QUOTE(sidewinder33 @ Jun 5 2005, 08:48 PM)
Since you have an eeprom backup try restoring that first, the 8a is a typical corrupted eeprom message.-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 06, 2005, 12:52:00 AM
-
i believe either is fine, the eeprom wont effect your hdd. well if you got banned and your hdd isnt stock then you will need to register a new gt. If you cant get on live then you cant register a new gt i believe. use configure magic to restore it and see what it says but. If you still have your banned hdd in then you need to change that out before you login.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 07, 2005, 02:29:00 AM
-
from the looks of it your ping time is the problem you have 65535ms where as it should be under 100ms, everything else looks good. are you using dialup or a router? that has to be one of the highest ping times ive ever seen, it probably is timing out,
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 08, 2005, 02:08:00 AM
-
haha, ya i should have warned you about that the pal format doesnt work all that well an ntsc format tv's. Hmmm if that didnt work, have you checked to see if the dvd region and all that mombo jumbo is where it should be?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mitsu50 on March 17, 2003, 12:03:00 PM
-
well looks like i've been banned, dont know how, i never go online with my chip enabled. can anyone else verify they were banned with there mod disabled? anyway here are my numbers:
x: 0000-F001
y: 00A8-6860
z: 8015-1917
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 17, 2003, 12:10:00 PM
-
banned, you must have accidently connected somehow (even without knowing, maybe a game trying to download something with your cable in)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mitsu50 on March 17, 2003, 01:19:00 PM
-
i must have been S-faced....cause i sure as hell dont remember. must have been when my friend brought over unreal, and we played. the chip must not have been off, and i though it was. oh well Config magic to the rescue!!!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: phantazma1 on March 18, 2003, 10:44:00 AM
-
here's my codes
W 0000-000B
X 0000-F001
Y 00A8-4860
Z 0000-0000
not banned with multibios TSOP
-
Title: Help for XYZ Live codes - See if you are banned
Post by: RiceCake on March 18, 2003, 03:24:00 PM
-
Got some news:
I was at home using my Xbox and got the 000B for the W code.
I headed over to a freinds and had to edit the Gateway and IP settings.
I now have 0015 for W (?).
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 18, 2003, 04:23:00 PM
-
um, did you have different routers or what? whats the difference between the two setups
-
Title: Help for XYZ Live codes - See if you are banned
Post by: HeLiuM on March 18, 2003, 06:40:00 PM
-
maybe it shows that your routers mac address matches the one previously used? if live can even check that..
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 22, 2005, 10:13:00 PM
-
double post
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 22, 2005, 10:15:00 PM
-
The easiest solution since the video mode switching didnt work is just to get a new eeprom. Have you changed any hardware on your xbox? Before you buy a new eeprom try restoring your eeprom from a backup, then if that doesnt work buy a new eeprom.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 23, 2005, 01:49:00 AM
-
from what i know reformatting the hdd incorrectly can give you the c2 error what did you use to do it, what process what program. On the first page of this thread there is a way given to explain how a guy reformatted his hdd and got it to work read it and give it a try. Form what it sounds like it has to be your hdd, when you reformatted you might not have done it completely right.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Inforne Complex on June 23, 2005, 10:43:00 AM
-
Post by: sidewinder33 on June 06, 2005, 12:52:00 AM
Post by: sidewinder33 on June 07, 2005, 02:29:00 AM
Post by: sidewinder33 on June 08, 2005, 02:08:00 AM
Post by: mitsu50 on March 17, 2003, 12:03:00 PM
x: 0000-F001
y: 00A8-6860
z: 8015-1917
Post by: Fuzzy on March 17, 2003, 12:10:00 PM
| QUOTE (mitsu50 @ Mar 17 2003, 04:03 PM) |
| well looks like i've been banned, dont know how, i never go online with my chip enabled. can anyone else verify they were banned with there mod disabled? anyway here are my numbers: x: 0000-F001 y: 00A8-6860 z: 8015-1917 |
banned, you must have accidently connected somehow (even without knowing, maybe a game trying to download something with your cable in)
Post by: mitsu50 on March 17, 2003, 01:19:00 PM
| QUOTE (Fuzzy @ Mar 17 2003, 09:10 PM) | ||
banned, you must have accidently connected somehow (even without knowing, maybe a game trying to download something with your cable in) |
i must have been S-faced....cause i sure as hell dont remember. must have been when my friend brought over unreal, and we played. the chip must not have been off, and i though it was. oh well Config magic to the rescue!!!
Post by: phantazma1 on March 18, 2003, 10:44:00 AM
W 0000-000B
X 0000-F001
Y 00A8-4860
Z 0000-0000
not banned with multibios TSOP
Post by: RiceCake on March 18, 2003, 03:24:00 PM
I was at home using my Xbox and got the 000B for the W code.
I headed over to a freinds and had to edit the Gateway and IP settings.
I now have 0015 for W (?).
Post by: Fuzzy on March 18, 2003, 04:23:00 PM
Post by: HeLiuM on March 18, 2003, 06:40:00 PM
Post by: sidewinder33 on June 22, 2005, 10:13:00 PM
Post by: sidewinder33 on June 22, 2005, 10:15:00 PM
Post by: sidewinder33 on June 23, 2005, 01:49:00 AM
Post by: Inforne Complex on June 23, 2005, 10:43:00 AM
QUOTE(sidewinder33 @ Jun 23 2005, 04:00 AM)
from what i know reformatting the hdd incorrectly can give you the c2 error what did you use to do it, what process what program. On the first page of this thread there is a way given to explain how a guy reformatted his hdd and got it to work read it and give it a try. Form what it sounds like it has to be your hdd, when you reformatted you might not have done it completely right.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 23, 2005, 11:37:00 AM
-
Hmm.. that's a good possibility I assume. I did it through the EvoX cd. Is this a no-go as far as formatting the hard drive? I'm wondering is their a way to fix without re-formatting? I have games on the harddrive I would like to keep but I can re-download if needed. I have the saves.
As far as i know the only way is to reformat, what chip do you have? you can just ftp all your stuff over to your comp then reformat and ftp it back. Its really easy if you have an ftp set up and enopugh room on your comp.
I have seen the dvd rom make that error. Im not sure how to fix it though, try geting your old dvd rom back and try that, or maybe someone else can help you with the dvd rom.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 23, 2005, 01:32:00 PM
-
hhmm, the cd should have worked in the first place. when you reformat it should wipe everything off your hdd. And when you ftp the stuff back it will be just as it was before, but hopefully without the error. I personally have an xenium chip and I used the operating system to upgrade my hdd, it formatted, and transfered all my old files from my old hdd to my new one, Thats why im not so sure how to reformat it, incorrectly. Lets just try the ftping your stuff out then reformatting with the evox cd and then puting your stuff back on. If either lord vader or lord magnus could help you with the best way i'm sure that either or both know the best way.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 24, 2005, 12:43:00 PM
-
as far as i know the evox cd should reformat it correctly, unless the hdd is messed up it should work.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on June 24, 2005, 12:53:00 PM
-
I agree, if you are running the retail keranl with a stock hdd, and it still gives you the error I dont see what can be the problem,
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Inforne Complex on June 25, 2005, 03:05:00 PM
-
Hmmm.. I just got off the phone with MS Tech Support. They took me all the way to the supervisor and he said the service is acting like I am not online and can't reach MS, yet the other part of the codes.. the IC and MT and all, show that I am online and am connecting. He says the codes contradict themselves and the only way he has ever seen any like this are on modified boxes. I told him mine wasn't and acted stupid of course but he said my codes could be the result of getting the "modified" error and trying to switch things up on the console to fix what gave me the code to begin with. By then though, my xbox is no longer gonna be at risk of banning so I don't get the code but it is still logged as being banned on the Xbox Live server so it won't let me on. This was his only guess but I know he is wrong and just doesn't want to tell me how to fix the eeprom or what is wrong because he wants to believe I don't have it modded. I also learned that he told me, after I told him I had heard the C2 code could mean a hardware mismatch, that the people on the forums were pretty much right about that. Good call there. He did tell me though they recently an even newer banning method has been instituted so that, any xbox that is banned will require you to get an entirely new box. Apparently he says it blocks the ENTIRE xbox and all parts. Take that for what it's worth. I am back to square one on the my codes though. I know I must be really close to fixing it... I just don't know how I need to fix it to get back on Live. If any of you know anything please let me know.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on June 25, 2005, 06:51:00 PM
-
Hi mate, I got your message.
Since you have the c2 code, there are specific procedures you can follow. Sidewinder already mentioned all of them.
Reformat but don't install Live, just go to complete stock. Slayer's disk should do the job perfectly fine.
Also, even though you said your eeprom is flashed correclty, try reflashing it.
And just to test things out, if you still can get ahold to that DVD drive, put it in and see what happens.
Like you were told, c2 is a hardware mismatch... so, going back to what you had could be a good choice.
Another thing... and I think this is your most viable solution, would be using a different eeprom, since it's been widely seen on this forums that some eeproms will just not work with certain boxes.
Sorry I couldn't help much after all. If I was in your shoes, I'd try to put back my DVD drive and see what happens, if I get the same code, definitely try a new eeprom, and for that Zodiiak is the man to see at the Buy & Sell forum.
Good luck.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Inforne Complex on June 25, 2005, 08:16:00 PM
-
Post by: sidewinder33 on June 23, 2005, 11:37:00 AM
QUOTE
Hmm.. that's a good possibility I assume. I did it through the EvoX cd. Is this a no-go as far as formatting the hard drive? I'm wondering is their a way to fix without re-formatting? I have games on the harddrive I would like to keep but I can re-download if needed. I have the saves.
As far as i know the only way is to reformat, what chip do you have? you can just ftp all your stuff over to your comp then reformat and ftp it back. Its really easy if you have an ftp set up and enopugh room on your comp.
QUOTE
I only changed the HDD and the DVD rom drive. I changed the HDD back but still no go. My feind has my DVD rom drive, do you think that the DVD rom drive is making the hardware error?
I have seen the dvd rom make that error. Im not sure how to fix it though, try geting your old dvd rom back and try that, or maybe someone else can help you with the dvd rom.
Post by: sidewinder33 on June 23, 2005, 01:32:00 PM
Post by: sidewinder33 on June 24, 2005, 12:43:00 PM
Post by: sidewinder33 on June 24, 2005, 12:53:00 PM
Post by: Inforne Complex on June 25, 2005, 03:05:00 PM
Post by: Lord Magnus on June 25, 2005, 06:51:00 PM
Since you have the c2 code, there are specific procedures you can follow. Sidewinder already mentioned all of them.
Reformat but don't install Live, just go to complete stock. Slayer's disk should do the job perfectly fine.
Also, even though you said your eeprom is flashed correclty, try reflashing it.
And just to test things out, if you still can get ahold to that DVD drive, put it in and see what happens.
Like you were told, c2 is a hardware mismatch... so, going back to what you had could be a good choice.
Another thing... and I think this is your most viable solution, would be using a different eeprom, since it's been widely seen on this forums that some eeproms will just not work with certain boxes.
Sorry I couldn't help much after all. If I was in your shoes, I'd try to put back my DVD drive and see what happens, if I get the same code, definitely try a new eeprom, and for that Zodiiak is the man to see at the Buy & Sell forum.
Good luck.
Post by: Inforne Complex on June 25, 2005, 08:16:00 PM
QUOTE(Lord Magnus @ Jun 25 2005, 09:02 PM)
Hi mate, I got your message.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MikesTooLz on March 20, 2003, 10:22:00 AM
-
i dont think they banned people durring the beta because that is one of the features they were testing. and had a limited number of testers. lol you dont wanna ban all your testers.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on June 27, 2005, 12:09:00 PM
-
Post by: MikesTooLz on March 20, 2003, 10:22:00 AM
Post by: Lord Magnus on June 27, 2005, 12:09:00 PM
QUOTE(Inforne Complex @ Jun 26 2005, 04:27 AM)
What dvd drive do you mean? I have the orignial one in it right now. I also got my newest eeprom from Zodiiak already so it should be working...hmm. How can I re-install it back to retail without live? Even on retail mine comes with Live already on it. Is there anything you know of I can try or is it possible the eeprom I got was bad and I will need to get another from Zodiiak?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: G0t M4xx 21 on June 27, 2005, 12:20:00 PM
-
hmm they may be right about the "new banning technique"
I have been on Live with my 200gb hdd since May with no problems, I have never logged onto Live with my mod on (I can't), and not messed with the eeprom, hdd, or anyhting else.
Yesterday, I was banned. i got a new eeprom from my stash of em, reflashed, and I was back on.
This morning, I was banned again.
W: 0000 0008
X: 0000 F001
Y: 00A8 6840
Z: 8015 190D
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on June 27, 2005, 12:29:00 PM
-
Post by: G0t M4xx 21 on June 27, 2005, 12:20:00 PM
I have been on Live with my 200gb hdd since May with no problems, I have never logged onto Live with my mod on (I can't), and not messed with the eeprom, hdd, or anyhting else.
Yesterday, I was banned. i got a new eeprom from my stash of em, reflashed, and I was back on.
This morning, I was banned again.
W: 0000 0008
X: 0000 F001
Y: 00A8 6840
Z: 8015 190D
Post by: Lord Magnus on June 27, 2005, 12:29:00 PM
QUOTE(G0t M4xx 21 @ Jun 27 2005, 08:31 PM)
hmm they may be right about the "new banning technique"
-
Title: Help for XYZ Live codes - See if you are banned
Post by: cshiz on June 27, 2005, 06:49:00 PM
-
my x3 modded x box with stock hard drive wont connect to live and it has the c2 in the first section of the y code and my eeprom said on liveinfo that the hdd is a fujitsu but it is really a western digital and the serial # and model # are different. my question is to anyone who can help i want to know if i could change it in configmagic and it would work on live or if i changed the info the hdd would not be readable
-
Title: Help for XYZ Live codes - See if you are banned
Post by: G0t M4xx 21 on June 27, 2005, 10:11:00 PM
-
Post by: cshiz on June 27, 2005, 06:49:00 PM
Post by: G0t M4xx 21 on June 27, 2005, 10:11:00 PM
QUOTE(Lord Magnus @ Jun 27 2005, 08:40 PM)
Yeap, definitely banned.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on June 28, 2005, 05:35:00 PM
-
Post by: Lord Magnus on June 28, 2005, 05:35:00 PM
QUOTE(Inforne Complex @ Jun 28 2005, 12:36 AM)
Sorry to ask again but it doesn't say "restore to stock" anywhere that I see. I only see "RESTORE RETAIL XBOX HD TO FACTORY" which I am pretty sure I have tried. Nothing has the option of with or without xbox live? Can you guide me on where to go to on the menu? Thanks.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on June 29, 2005, 01:36:00 PM
-
Post by: Lord Magnus on June 29, 2005, 01:36:00 PM
QUOTE(Inforne Complex @ Jun 29 2005, 09:32 AM)
I have a 1.4 xbox and when I use that option it simply restores the dash my xbox came with, which has Xbox Live already installed and ready to go. Any other ideas?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Inforne Complex on July 01, 2005, 10:33:00 PM
-
No more replys? :-\
-
Title: Help for XYZ Live codes - See if you are banned
Post by: RiceCake on March 21, 2003, 05:33:00 AM
-
I think I figured out the W.
When at my house my Xbox runs through a switch, it runs on 100Mbps Full-Duplex. At my friends house it doesn't go through the backbone, but rather straight into the cable modem, and runs at 10Mbps Half-Duplex.
I figured this out yesterday, when I saw my 000B, but after running it through a 10Mbps Half-Duplex hub, I got 0015.
Edit: Heh, I don't use a router.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Inforne Complex on July 03, 2005, 10:17:00 PM
-
No hope?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on July 04, 2005, 01:14:00 AM
-
Post by: Inforne Complex on July 01, 2005, 10:33:00 PM
Post by: RiceCake on March 21, 2003, 05:33:00 AM
When at my house my Xbox runs through a switch, it runs on 100Mbps Full-Duplex. At my friends house it doesn't go through the backbone, but rather straight into the cable modem, and runs at 10Mbps Half-Duplex.
I figured this out yesterday, when I saw my 000B, but after running it through a 10Mbps Half-Duplex hub, I got 0015.
Edit: Heh, I don't use a router.
Post by: Inforne Complex on July 03, 2005, 10:17:00 PM
Post by: Lord Magnus on July 04, 2005, 01:14:00 AM
QUOTE(Inforne Complex @ Jul 4 2005, 06:28 AM)
No hope?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 04, 2005, 12:18:00 PM
-
lord he already is using a new eeprom, and zodiiak hasnt been much help, We worked on this for about a week on aim. He could try a third eeprom, but I suggested that he might try getting an xbox off ebay for cheap. THe new eeprom is definately the cheapest but it also might not work. Hes getting desperate, since he's been having this problem for a week or two now, The only thing keeping him sane is xlink, hahahah I cant believe that we cant get this one.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on July 05, 2005, 12:38:00 AM
-
So, third EEPROM and no love ?
Insane... I still believe new (hopefully compatible and working) eeprom is his best shot... or... new xbox... but if you put in the scale... EEPROM = 10 bucks... XBOX = 119 bucks (if used).
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 05, 2005, 12:53:00 AM
-
I agree, but the odds of it working arent that good. I would try it just because its not 120$ investment, and it could work. Ive seen people with these same codes but most could be fixed with a simple eeprom switch, but this would be the third eeprom, Its just to complicated its probably something we just cant see but is right in front of us.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on July 05, 2005, 01:14:00 AM
-
c2 can be a bitch, we already know that.
What have you guys tried so far?
As far as I know, you have three options in this case:
1- Video mode switch.
2- EEPROM change.
3- New xbox.
Of course... #3 does not sound appealing at all.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 05, 2005, 10:10:00 AM
-
weve tried both the first two options along with a total reformat of his hdd, What I think it could be is a incorrectly formatted hdd thats not broken to the point that it wont work but to the point that it knows its wrong, but weve reformatted so i dont know if that could still be a problem. other than the long reformat, the slayer reformat should work.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on July 05, 2005, 11:21:00 AM
-
I don't know if a bad HD will cause a c2 error.
But to make sure the HD is fine, or not. Have him unlock and install the HD in his computer and check it for bad sectors and such.
There are several free programs out there that will do the job perfectly fine. It will take a long time though, but if he has already spent 2 weeks trying to get it to work, then 1 more day won't do that much more damage, and we can start the "elimination process" as well.
Keep me posted.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mikl on March 21, 2003, 05:33:00 PM
-
I think i was banned
here s my XYZ ' s code
X.0000-F001
Y.00A8-6860
Z.8015-1918
Can someone confirm i m banned before i change my eeprom..?
Thanks
-
Title: Help for XYZ Live codes - See if you are banned
Post by: LumbraX on March 21, 2003, 06:03:00 PM
-
Yup your banned. 6 is in the 2'nd part of the Y code. :-(
Remeber to use ConfigMagic Final when flashing a new EEPRom.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 21, 2003, 06:18:00 PM
-
thx for picking that one up for me
-
Title: Help for XYZ Live codes - See if you are banned
Post by: pk_synths on July 07, 2005, 07:06:00 PM
-
I have the same issue and it's driving me up the wall for 2 weeks now. Same xyz codes too.
0000-000B
0000-F001
00C2-03E0
Stock HD
Used the same XBox for Live in the past
After I installed SPIce I've never been online with chip on or off (until I actually tried getting on 2 weeks ago with the chip off - XBox wasnt even plugged into a network before than)
I have reformatted my drive in the past (6x now :/ )
Tried the NTSC/PAL switch
Made sure all EEPROM info corresponds to the box
All original hardware
Only wierd thing I have noticed is that when I used my XBox before I used to have access to the f: and g: drive on my stock HD (almost 90% sure) and now I dont have access to either of them. All "0"ed out. I believe they "0"ed after I reformated my drive the first time.
I downloaded X-World install disk last week and sorta translated some blurb about XBox Live (It's in German) and it said Live needs to be installed on the F: drive. Not entirely sure if this is right or not but it would make sense. So no f: drive than NO XBOX LIVE.
Most of the posts I've read regarding the 00c2 - 03e0 errors seem to involve reformatting the HD at one point or another.
These are just hunches but are the f: and g: drives accessible on the stock drives on a newly modded xbox??? If so anyway to get them back??
Hope any of this helps.
-PK
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 07, 2005, 11:57:00 PM
-
the f and g dirve are invisible when your retail bios are running. All the stock drive knows is c,d, and e. You live data should be on the c drive anyway have you tried a new eeprom? On a newly moded xbox you have to set the f and g drives up if you dont then they dont exist on your hdd.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 08, 2005, 04:29:00 PM
-
slowly but surely we are beating the c2 error.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: monkeyflungpoo on July 12, 2005, 08:25:00 PM
-
My XYZ CODE
1.00.5659.03
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z : 0000 - 0000
UL: 0 Kb DL: 0 Kb
L: 0 ms (0 ms) P: 0 / 0
can someone tell me if i am banned
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 13, 2005, 01:03:00 AM
-
you arent banned. Since the last two guys have had the exact same codes we'll try the exact same thing that fixed them, Get a new eeprom. hhahaha thats the only thing that has ever fixed this error. If the new eeprom doesnt work then ask for another one like a trade. Sometimes the eeproms that they give get messed up from when they are pulled, to when they get to you. It should just be as easy as getting a new eeprom though.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: herbtv on July 13, 2005, 12:39:00 PM
-
they (MS) is definitely doing something. without making any changes and playing on live for a few months all of the sudden i was banned or more correctly "live not found". i tried different things like relocking, switching back to my old DVD player, changing regions, taking all the non stock files off the drive (I was using the original drive to get on live). i went and bought a new stock xbox from the store to test and it went through like butter. then tried my modded one again and no luck. i have since bought a cheap used xbox and plan to use it for live.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Chux on July 13, 2005, 01:23:00 PM
-
From what I understand now, if you've been banned before, they're looking at your HDD, if it's not stock, you're banned again, that being said I just got a new eeprom from Zodiiak, and a new stock seagate HDD. When I get home, I'll test it out.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 13, 2005, 01:35:00 PM
-
inforne you could have run into a problem with eeprom crowding. thatis zodiiak mistakenly sends the eeprom to a couple ppl and eventually when they all get onlive they all get banned since the marriage theory is borken with every xbox, and the original one is probably banned because you cant get an eeprom off an xbox with out modding it a little.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: petermac on July 14, 2005, 03:39:00 PM
-
i didnt read all 57 pages so if this is a new code please let me know, this is what happened
i transfered the TriIIWiII (which was created and used on a stock hard drive, for 2 weeks)account to my 160gb modded xbox,played halo2 for one day, now i check today and i am banned, gettin modified xbox error, i had a new eeprom(might not have been a virgin maybe), and a new hd never used before, now my 160 gig is and the eeprom is banned, what a waste, is there anything i can do to stop from having to get a new hd? (i calling MS and makin somethin up) im sick of this horseshit, i followed the marriage theory completely.
I am getting modified xbox error.
codes are
X:0000-F001
Y:00A8-6840
Z:8015-190D
Could this be hard drive scaning in action, the account i transfered was not flagged, but it was on a stock hd xbox with another account that was flagged,could this be it?
Does M$ link gamertags together and flag them in a group of whatever gamertag is on your xbox is flagged?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 14, 2005, 04:44:00 PM
-
hmm no this is definately not a new code, but you raise an interestion point about scannig nor flagging grouped gt's. It could have been your eeprom. You can tell if your gt's are flagged, so that is always a possibility. no you'll need a new hdd and eeprom. Sry. But like i said before this could be a new technique. Makes sense, in logic, Modder has two gt's mods on one plays normal o nthe other. Just an Idea.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: noise on July 19, 2005, 03:30:00 AM
-
Poop, Live has stopped working
I bought an Xecutor 3CE, fitted and installed a slightly larger harddrive.
Everything worked, installed Slayer 2.6, everything worked ok, except after a number of months XBMC and Avalaunch started playing up.
Decided to re-install from scracth, re-downloaded Slayer 2.6 and installed. x-box wouldn't boot into Evox (didn't unlock the HDD before i re-installed, don't know if that effected things?), forgot how to get into X3 bios setup so played around with loads of setting trying to get the thing to boot into evox, Unlocking HDD, moving files around, etc. Nothing worked till i googled how to get in to the X3 Live setup.
Re-installed Slayer 2.6 (unlocked the HDD first this time) everything works fine, all except X-Box Live
It just wont connect to the Live server
Get's IP addy, DNS, etc but stops on the the last bit.
Did the XYZ thing and got:
1.00.5640.01
W: 0000-0015
X: 0000-F001
Y: 00C2-03E0
Z: 0000-0000
Read up on this forum, googled a bit and saw it was a hardware mismatch problem.
Tried engimah, that didn't work.
have tried locking and unlocking the HDD with various different programs (X3 backup bios), Avalaunch, Config Manager) and none of them work.
Anybody think of anything else to try?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: noise on July 19, 2005, 02:54:00 PM
-
That means you have a hardware mismatch on your xbox. it doesn't mean your banned.
I have the same code, see above post.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 19, 2005, 05:47:00 PM
-
hey guys we here at the scene have come to the conclusion that this is a corrupted eeprom, if you have a backup try restoring it, if that doesnt work, then get a new eeprom. These are the only 2 ways to fix this problem that we know of. good luck guys
-
Title: Help for XYZ Live codes - See if you are banned
Post by: noise on July 19, 2005, 11:52:00 PM
-
OK. cheers.
A guy at work said he can do me a copy of his eeprom, as he has 2 xboxes
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 20, 2005, 01:42:00 AM
-
Post by: sidewinder33 on July 04, 2005, 12:18:00 PM
I cant believe that we cant get this one.
Post by: Lord Magnus on July 05, 2005, 12:38:00 AM
Insane... I still believe new (hopefully compatible and working) eeprom is his best shot... or... new xbox... but if you put in the scale... EEPROM = 10 bucks... XBOX = 119 bucks (if used).
Post by: sidewinder33 on July 05, 2005, 12:53:00 AM
Post by: Lord Magnus on July 05, 2005, 01:14:00 AM
What have you guys tried so far?
As far as I know, you have three options in this case:
1- Video mode switch.
2- EEPROM change.
3- New xbox.
Of course... #3 does not sound appealing at all.
Post by: sidewinder33 on July 05, 2005, 10:10:00 AM
Post by: Lord Magnus on July 05, 2005, 11:21:00 AM
But to make sure the HD is fine, or not. Have him unlock and install the HD in his computer and check it for bad sectors and such.
There are several free programs out there that will do the job perfectly fine. It will take a long time though, but if he has already spent 2 weeks trying to get it to work, then 1 more day won't do that much more damage, and we can start the "elimination process" as well.
Keep me posted.
Post by: mikl on March 21, 2003, 05:33:00 PM
here s my XYZ ' s code
X.0000-F001
Y.00A8-6860
Z.8015-1918
Can someone confirm i m banned before i change my eeprom..?
Thanks
Post by: LumbraX on March 21, 2003, 06:03:00 PM
Remeber to use ConfigMagic Final when flashing a new EEPRom.
Post by: Fuzzy on March 21, 2003, 06:18:00 PM
| QUOTE (LumbraX @ Mar 21 2003, 10:03 PM) |
| Yup your banned. 6 is in the 2'nd part of the Y code. :-( Remeber to use ConfigMagic Final when flashing a new EEPRom. |
thx for picking that one up for me
Post by: pk_synths on July 07, 2005, 07:06:00 PM
0000-000B
0000-F001
00C2-03E0
Stock HD
Used the same XBox for Live in the past
After I installed SPIce I've never been online with chip on or off (until I actually tried getting on 2 weeks ago with the chip off - XBox wasnt even plugged into a network before than)
I have reformatted my drive in the past (6x now :/ )
Tried the NTSC/PAL switch
Made sure all EEPROM info corresponds to the box
All original hardware
Only wierd thing I have noticed is that when I used my XBox before I used to have access to the f: and g: drive on my stock HD (almost 90% sure) and now I dont have access to either of them. All "0"ed out. I believe they "0"ed after I reformated my drive the first time.
I downloaded X-World install disk last week and sorta translated some blurb about XBox Live (It's in German) and it said Live needs to be installed on the F: drive. Not entirely sure if this is right or not but it would make sense. So no f: drive than NO XBOX LIVE.
Most of the posts I've read regarding the 00c2 - 03e0 errors seem to involve reformatting the HD at one point or another.
These are just hunches but are the f: and g: drives accessible on the stock drives on a newly modded xbox??? If so anyway to get them back??
Hope any of this helps.
-PK
Post by: sidewinder33 on July 07, 2005, 11:57:00 PM
Post by: sidewinder33 on July 08, 2005, 04:29:00 PM
Post by: monkeyflungpoo on July 12, 2005, 08:25:00 PM
1.00.5659.03
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z : 0000 - 0000
UL: 0 Kb DL: 0 Kb
L: 0 ms (0 ms) P: 0 / 0
can someone tell me if i am banned
Post by: sidewinder33 on July 13, 2005, 01:03:00 AM
Post by: herbtv on July 13, 2005, 12:39:00 PM
Post by: Chux on July 13, 2005, 01:23:00 PM
Post by: sidewinder33 on July 13, 2005, 01:35:00 PM
Post by: petermac on July 14, 2005, 03:39:00 PM
i transfered the TriIIWiII (which was created and used on a stock hard drive, for 2 weeks)account to my 160gb modded xbox,played halo2 for one day, now i check today and i am banned, gettin modified xbox error, i had a new eeprom(might not have been a virgin maybe), and a new hd never used before, now my 160 gig is and the eeprom is banned, what a waste, is there anything i can do to stop from having to get a new hd? (i calling MS and makin somethin up) im sick of this horseshit, i followed the marriage theory completely.
I am getting modified xbox error.
codes are
X:0000-F001
Y:00A8-6840
Z:8015-190D
Could this be hard drive scaning in action, the account i transfered was not flagged, but it was on a stock hd xbox with another account that was flagged,could this be it?
Does M$ link gamertags together and flag them in a group of whatever gamertag is on your xbox is flagged?
Post by: sidewinder33 on July 14, 2005, 04:44:00 PM
Post by: noise on July 19, 2005, 03:30:00 AM
I bought an Xecutor 3CE, fitted and installed a slightly larger harddrive.
Everything worked, installed Slayer 2.6, everything worked ok, except after a number of months XBMC and Avalaunch started playing up.
Decided to re-install from scracth, re-downloaded Slayer 2.6 and installed. x-box wouldn't boot into Evox (didn't unlock the HDD before i re-installed, don't know if that effected things?), forgot how to get into X3 bios setup so played around with loads of setting trying to get the thing to boot into evox, Unlocking HDD, moving files around, etc. Nothing worked till i googled how to get in to the X3 Live setup.
Re-installed Slayer 2.6 (unlocked the HDD first this time) everything works fine, all except X-Box Live
It just wont connect to the Live server
Get's IP addy, DNS, etc but stops on the the last bit.
Did the XYZ thing and got:
1.00.5640.01
W: 0000-0015
X: 0000-F001
Y: 00C2-03E0
Z: 0000-0000
Read up on this forum, googled a bit and saw it was a hardware mismatch problem.
Tried engimah, that didn't work.
have tried locking and unlocking the HDD with various different programs (X3 backup bios), Avalaunch, Config Manager) and none of them work.
Anybody think of anything else to try?
Post by: noise on July 19, 2005, 02:54:00 PM
I have the same code, see above post.
Post by: sidewinder33 on July 19, 2005, 05:47:00 PM
Post by: noise on July 19, 2005, 11:52:00 PM
A guy at work said he can do me a copy of his eeprom, as he has 2 xboxes
Post by: sidewinder33 on July 20, 2005, 01:42:00 AM
QUOTE(q8_berserk @ Jul 19 2005, 09:29 PM)
i'll go to shop and i'll see what ican do
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lord Magnus on July 20, 2005, 02:01:00 AM
-
Also make sure your friend didn't take that box on Live
-
Title: Help for XYZ Live codes - See if you are banned
Post by: noise on July 20, 2005, 09:51:00 AM
-
Hmm. I'll have to ask him, see what version he's got. should see him tomorrow night.
He deffinatley hasn't used it online though, or so he told me
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 20, 2005, 11:46:00 AM
-
Post by: Lord Magnus on July 20, 2005, 02:01:00 AM
Post by: noise on July 20, 2005, 09:51:00 AM
He deffinatley hasn't used it online though, or so he told me
Post by: sidewinder33 on July 20, 2005, 11:46:00 AM
QUOTE(q8_berserk @ Jul 20 2005, 07:47 AM)
kuwait hot like hell 
buts ok with me XD
-
Title: Help for XYZ Live codes - See if you are banned
Post by: noise on July 20, 2005, 02:18:00 PM
-
In order to boot into the normal xbox dash, you will need to have the HDD locked.
If you try to boot the xbox into MS dash while the HDD is unlocked, you will just get an error.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Brizzzer on July 21, 2005, 10:59:00 PM
-
Ok, I bought a new eeprom cause I put a new HD in after I have already been on live. But it won't connect.
W:0000-000B
X:0000-F001
Y:00C2-0062
Z:0000-0000
I already know 00C2 means hardware mismatch. But, another thing I noticed is that that HDkey is all 0's when I got it. Its never been on live before. And the xbox was modded and had the M$ dash files removed to prevent it happening. Its a v1.1 eeprom.
Thanks for any help at all.
P.S. Do I change the video settings to PAL > Reboot > Then Change to NTSC > Reboot?
EDIT: Forgot to ask something.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 22, 2005, 03:42:00 AM
-
Your code is one that will be fixed by using the enigmah video switcher. I didnt rebooot mine i just went from nstc to pal then back ot ntsc and it worked just fine. If you do reboot your screen will be really messed up like you would have to find your way back by counting. That should fix it. If you ever want to put your m$ dash back on you can just use a live enabled game, then log in ( with your ethernet cable out so there is no way to connect to live) but thats if you want the dash back. Hmmm the hdd key shouldnt be all zeros but if it works dnt fix it.
ya your gonna need a new eeprom to fix the error. taking off all your stuff doesnt do anything. Just get a new eeprom and it should work for you.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Brizzzer on July 22, 2005, 03:47:00 AM
-
I did the video trick. I redid my new drive and a couple other things and nothing works. Mabey I missed a step i all this I don't know. But any other ideas would be really greatfull.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 22, 2005, 03:54:00 AM
-
did you get enigmah video switcher? Because i had that exact code and the video mode switch did it. Maybe your hddkey is whats giving you the error, but if your xbox couldnt unlock it then you wouldnt be able to run the dash to even get the error. hhmm If you have any backups of your eeprom you could restore them. If that doesnt work i would really try the videomode again, just because the next oprion is to try a new eeprom.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 24, 2005, 03:22:00 PM
-
the guy at the shop is wrong. bios are for your modchip, eeproms are for your regular xbox. Go to the buy/sell/trade forum just below the live forum, and buy an eeprom. Its a saved file that is in a .bin form. This is all done online you dont actually get anything other than a file. dont listen to this guy at the shop he obviously has no idea what hes talking about.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: deltaqueue on July 26, 2005, 01:55:00 PM
-
I just flashed a virgin eeprom (correct version and everything) with the addition of my new hard drive. I followed ALL of the instructions in config magic (including locking the hdd after it all), but am now banned because of hardware modification.. I played on live all last night and it worked, but came home this afternoon to network troubles, and thus my banning. Here are my codes
1.00.5971.01
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 190D
L: 0 ms (0 ms)
So, according to the 6 on the Y I'm toast... Correct me if I'm wrong, but since my gamertag is flagged now, I can ONLY play on my stock hdd?
Also, does anyone have ANY idea why I would have been banned in the first place? I have auto-log in disabled, and my mod chip was off both times I logged in. I can't seem to figure out why I was banned.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: deltaqueue on July 26, 2005, 04:52:00 PM
-
correct... I think they have scanners now
If ANYONE has successfully updated their eeprom and hdd, please post about it. I'd like to hear some variation in results.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 26, 2005, 05:59:00 PM
-
They have always been able to detect a big hdd, Im betting you guys had flagged gt's. A flagged gt can occur from bad feedback, cheating, and pretty much anything that doesnt comply with their tos. When you have a flagged gt you get a hdd scan and if its not a stock sized hdd then you get banned. Now because of all the banning their are more ppl than eeproms, so multiple people log in n the same eeprom, and that results in a ban since it breaks marriage theory.
correct... I think they have scanners now sad.gif
I have seen lots here on the scene, the biggest thing that keep banning people is bc they dont follow the rules of getting back on, they get a large hdd, a new eeprom and they use their old gt, and they get banned. They've always had scanners but they dont use them unless your gt is flagged.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: The Third Man on July 26, 2005, 06:26:00 PM
-
buts ok with me XDPost by: noise on July 20, 2005, 02:18:00 PM
If you try to boot the xbox into MS dash while the HDD is unlocked, you will just get an error.
Post by: Brizzzer on July 21, 2005, 10:59:00 PM
W:0000-000B
X:0000-F001
Y:00C2-0062
Z:0000-0000
I already know 00C2 means hardware mismatch. But, another thing I noticed is that that HDkey is all 0's when I got it. Its never been on live before. And the xbox was modded and had the M$ dash files removed to prevent it happening. Its a v1.1 eeprom.
Thanks for any help at all.
P.S. Do I change the video settings to PAL > Reboot > Then Change to NTSC > Reboot?
EDIT: Forgot to ask something.
Post by: sidewinder33 on July 22, 2005, 03:42:00 AM
QUOTE
Ok, I bought a new eeprom cause I put a new HD in after I have already been on live. But it won't connect.
W:0000-000B
X:0000-F001
Y:00C2-0062
Z:0000-0000
I already know 00C2 means hardware mismatch. But, another thing I noticed is that that HDkey is all 0's when I got it. Its never been on live before. And the xbox was modded and had the M$ dash files removed to prevent it happening. Its a v1.1 eeprom.
Thanks for any help at all.
P.S. Do I change the video settings to PAL > Reboot > Then Change to NTSC > Reboot?
EDIT: Forgot to ask something.
W:0000-000B
X:0000-F001
Y:00C2-0062
Z:0000-0000
I already know 00C2 means hardware mismatch. But, another thing I noticed is that that HDkey is all 0's when I got it. Its never been on live before. And the xbox was modded and had the M$ dash files removed to prevent it happening. Its a v1.1 eeprom.
Thanks for any help at all.
P.S. Do I change the video settings to PAL > Reboot > Then Change to NTSC > Reboot?
EDIT: Forgot to ask something.
Your code is one that will be fixed by using the enigmah video switcher. I didnt rebooot mine i just went from nstc to pal then back ot ntsc and it worked just fine. If you do reboot your screen will be really messed up like you would have to find your way back by counting. That should fix it. If you ever want to put your m$ dash back on you can just use a live enabled game, then log in ( with your ethernet cable out so there is no way to connect to live) but thats if you want the dash back. Hmmm the hdd key shouldnt be all zeros but if it works dnt fix it.
QUOTE
i remove the evox and apps and the modchip :/
so i only have xbox dashboard
and i get this shity error sleep.gif"
i'll go to the shop and tell him to give me new eeprom
i hope he understand what i mean XD
so i only have xbox dashboard
and i get this shity error sleep.gif"
i'll go to the shop and tell him to give me new eeprom
i hope he understand what i mean XD
ya your gonna need a new eeprom to fix the error. taking off all your stuff doesnt do anything. Just get a new eeprom and it should work for you.
Post by: Brizzzer on July 22, 2005, 03:47:00 AM
Post by: sidewinder33 on July 22, 2005, 03:54:00 AM
Post by: sidewinder33 on July 24, 2005, 03:22:00 PM
Post by: deltaqueue on July 26, 2005, 01:55:00 PM
1.00.5971.01
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 190D
L: 0 ms (0 ms)
So, according to the 6 on the Y I'm toast... Correct me if I'm wrong, but since my gamertag is flagged now, I can ONLY play on my stock hdd?
Also, does anyone have ANY idea why I would have been banned in the first place? I have auto-log in disabled, and my mod chip was off both times I logged in. I can't seem to figure out why I was banned.
Post by: deltaqueue on July 26, 2005, 04:52:00 PM
If ANYONE has successfully updated their eeprom and hdd, please post about it. I'd like to hear some variation in results.
Post by: sidewinder33 on July 26, 2005, 05:59:00 PM
QUOTE
Maybe MS can now detect upgraded hard drives?
They have always been able to detect a big hdd, Im betting you guys had flagged gt's. A flagged gt can occur from bad feedback, cheating, and pretty much anything that doesnt comply with their tos. When you have a flagged gt you get a hdd scan and if its not a stock sized hdd then you get banned. Now because of all the banning their are more ppl than eeproms, so multiple people log in n the same eeprom, and that results in a ban since it breaks marriage theory.
correct... I think they have scanners now sad.gif
QUOTE
If ANYONE has successfully updated their eeprom and hdd, please post about it. I'd like to hear some variation in results.
I have seen lots here on the scene, the biggest thing that keep banning people is bc they dont follow the rules of getting back on, they get a large hdd, a new eeprom and they use their old gt, and they get banned. They've always had scanners but they dont use them unless your gt is flagged.
Post by: The Third Man on July 26, 2005, 06:26:00 PM
QUOTE(pastudan @ Jul 26 2005, 07:03 PM)
I seem to have the same problem. Yesterday I was playing everything fine, like I normally do, and today I come back and im banned. Before I always know why I am getting banned, like playing with the chip on or something. This time I have no idea why I got banned. To the best of my knowledge my gamertag is not flagged. Maybe MS can now detect upgraded hard drives?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 26, 2005, 07:19:00 PM
-
wow with a stocker. We've almost ruled out that they scan for contents bc there have been several people that log in got the au with stock hd's and lots of unsigned code and they are still on. The only reason they could have caught you is because of your modchip, but your 100% sure that is never went on live with it on. Do you have younger siblings that like to push buttons? or kids that like to push buttons. that sucks man.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: deltaqueue on July 26, 2005, 07:20:00 PM
-
Post by: sidewinder33 on July 26, 2005, 07:19:00 PM
Post by: deltaqueue on July 26, 2005, 07:20:00 PM
QUOTE(sidewinder33 @ Jul 26 2005, 08:10 PM)
They have always been able to detect a big hdd, Im betting you guys had flagged gt's. A flagged gt can occur from bad feedback, cheating, and pretty much anything that doesnt comply with their tos. When you have a flagged gt you get a hdd scan and if its not a stock sized hdd then you get banned. Now because of all the banning their are more ppl than eeproms, so multiple people log in n the same eeprom, and that results in a ban since it breaks marriage theory.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: The Third Man on July 27, 2005, 05:19:00 AM
-
Post by: The Third Man on July 27, 2005, 05:19:00 AM
QUOTE(sidewinder33 @ Jul 26 2005, 10:30 PM)
wow with a stocker. We've almost ruled out that they scan for contents bc there have been several people that log in got the au with stock hd's and lots of unsigned code and they are still on. The only reason they could have caught you is because of your modchip, but your 100% sure that is never went on live with it on. Do you have younger siblings that like to push buttons? or kids that like to push buttons. that sucks man.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Frosty Freeze on July 30, 2005, 10:44:00 AM
-
ok this may be a really lame question...........
but how can you tell if you have been banned or are just having network problems?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on July 30, 2005, 01:04:00 PM
-
Post by: Frosty Freeze on July 30, 2005, 10:44:00 AM
but how can you tell if you have been banned or are just having network problems?
Post by: sidewinder33 on July 30, 2005, 01:04:00 PM
QUOTE(Frosty Freeze @ Jul 30 2005, 09:55 AM)
ok this may be a really lame question...........
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ukred11 on March 31, 2003, 01:59:00 PM
-
fuzzy can u help plz?
until last thursday i could connect without ne problems to live
now i cant
even put my orignal hdd back in my xbox to c if that would work but 2 no avail
here r the xy&z codes for both hdd
60 gig
x: 0000 - 000B
Y: 0088 - 1C00
Z: 0000 - 0000
original hdd
x: 0000 - 000B
y: 00C2 - 0380
z: 0000 - 0000
i just want to get back on 2 live
ne help is most welcome
tia
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on March 31, 2003, 03:49:00 PM
-
wtf is up with your codes lol. The first one looks like something that ive seen before where you cant access but its not banned. It looks like your going to have to flash your eeprom anyway. Sorry bud
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ukred11 on March 31, 2003, 11:57:00 PM
-
cheers for the fuzzy
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ukred11 on April 02, 2003, 11:13:00 AM
-
thanks for the help fuzzy
just to let u know i'm back on live
problem was with my isp & some ip addys that they had been allocated
& ms not being able to process them right
back up & working now
cheers
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on April 02, 2003, 11:37:00 AM
-
hmm, maybe that has something to do with whats going on, whos your isp?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ukred11 on April 02, 2003, 01:50:00 PM
-
blueyonder on a 1meg connection
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on April 02, 2003, 05:51:00 PM
-
hmm, still trying to figure out what those codes mean, ive heard them so many times before when people cant connect but im pretty sure its not banned (as you have proved)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: pira on October 06, 2005, 09:19:00 AM
-
Hi Guys! This is my setting. I have to Xbox, each one have a mods chip, DUOX2 & Xenium Ice.
1.00.5971.01
w: 0000-000B
x: 0000-F009
y: 00C2-03E0
z: 0000-0000
l: 0ms (0ms)
p:0/0
DuoX2, original drive Seagate ST310014ACE
Thks for your Help! Pira
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Statecowboy on October 06, 2005, 09:21:00 AM
-
Post by: ukred11 on March 31, 2003, 01:59:00 PM
until last thursday i could connect without ne problems to live
now i cant
even put my orignal hdd back in my xbox to c if that would work but 2 no avail
here r the xy&z codes for both hdd
60 gig
x: 0000 - 000B
Y: 0088 - 1C00
Z: 0000 - 0000
original hdd
x: 0000 - 000B
y: 00C2 - 0380
z: 0000 - 0000
i just want to get back on 2 live
ne help is most welcome
tia
Post by: Fuzzy on March 31, 2003, 03:49:00 PM
| QUOTE (ukred11 @ Mar 31 2003, 05:59 PM) |
| fuzzy can u help plz? until last thursday i could connect without ne problems to live now i cant even put my orignal hdd back in my xbox to c if that would work but 2 no avail here r the xy&z codes for both hdd 60 gig x: 0000 - 000B Y: 0088 - 1C00 Z: 0000 - 0000 original hdd x: 0000 - 000B y: 00C2 - 0380 z: 0000 - 0000 i just want to get back on 2 live ne help is most welcome tia |
wtf is up with your codes lol. The first one looks like something that ive seen before where you cant access but its not banned. It looks like your going to have to flash your eeprom anyway. Sorry bud
Post by: ukred11 on March 31, 2003, 11:57:00 PM
Post by: ukred11 on April 02, 2003, 11:13:00 AM
just to let u know i'm back on live
problem was with my isp & some ip addys that they had been allocated
& ms not being able to process them right
back up & working now
cheers
Post by: Fuzzy on April 02, 2003, 11:37:00 AM
| QUOTE (ukred11 @ Apr 2 2003, 03:13 PM) |
| thanks for the help fuzzy just to let u know i'm back on live problem was with my isp & some ip addys that they had been allocated & ms not being able to process them right back up & working now cheers |
hmm, maybe that has something to do with whats going on, whos your isp?
Post by: ukred11 on April 02, 2003, 01:50:00 PM
Post by: Fuzzy on April 02, 2003, 05:51:00 PM
| QUOTE (ukred11 @ Apr 2 2003, 05:50 PM) |
| blueyonder on a 1meg connection |
hmm, still trying to figure out what those codes mean, ive heard them so many times before when people cant connect but im pretty sure its not banned (as you have proved)
Post by: pira on October 06, 2005, 09:19:00 AM
1.00.5971.01
w: 0000-000B
x: 0000-F009
y: 00C2-03E0
z: 0000-0000
l: 0ms (0ms)
p:0/0
DuoX2, original drive Seagate ST310014ACE
Thks for your Help! Pira
Post by: Statecowboy on October 06, 2005, 09:21:00 AM
QUOTE(sidewinder33 @ Jul 30 2005, 03:15 PM)
you can tell you banned by the y line of code if you have a 5 in the second set like this Y:xxxx-6xxx your banned anything else is a network prob or software prob.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on October 06, 2005, 07:35:00 PM
-
Post by: sidewinder33 on October 06, 2005, 07:35:00 PM
QUOTE(pira @ Oct 6 2005, 08:30 AM)
Hi Guys! This is my setting. I have to Xbox, each one have a mods chip, DUOX2 & Xenium Ice.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: killah2k3 on April 04, 2003, 03:39:00 AM
-
hey all i got a matrix on mode 3 .... this is my XYZ code .... im in canada
W:0000-000B
X:0000-F001
Y:00A8-4840
Z:0000-0000
the matrix is enabled when i go to xbox live tab
and it says xbox live connected....
does this mean i am not bannned ?
HD is also a 30gig one locked
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bearauto on April 04, 2003, 08:39:00 AM
-
Yeah, accessing the LIVE tab while the modchip is activated will get you banned...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: psibob84 on April 04, 2003, 03:06:00 PM
-
running an X2 Pro which is always disabled when running original games, also have no live enabled games on my hd so they cant phone home.
All settings are manually entered and the xbox is NOT banned
X:0000-000D
Y:00A8-4800
Z:0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on April 05, 2003, 07:09:00 AM
-
I just noticed, the update added a few new valid codes and changed around some meanings..im working on it, im workin on it...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: LafferUSA on November 01, 2005, 03:41:00 PM
-
1.00.5971.01
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z: 0000 - 0000
L: 0 ms (0 ms)
P: 0/0
-------------------------------
1.00.5971.01
MT: 1 (0015 - 00F0)
IC: 1 (0015 - 00F0)
NT: 0
Do I have that unsolvable issue?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on November 01, 2005, 05:52:00 PM
-
00C2 (Almost Definitely) FINAL INFO:
By Cutriss
It is my guess (and much of the user-posted evidence supports this) that when people are using ConfigMagic to lock their HDs, they are either doing so incorrectly, or there may be an underlying problem in ConfigMagic.
If your Xbox is banned and you successfully connect to Live, you will always get a message saying that your connection is dropped because of modified hardware or software.
If you simply get the message "Xbox Live not found", then check your XYZ settings. Specifically, we're looking at row Y, the third and fourth characters. If these say "C1", "C2", "C3", or "8A" (NOT A8!), then you have a hardware mismatch problem with your EEPROM. Typically, you'll also see "AFFF" or "0000" in the first half of Z as well. This most frequently arises from people modifying their EEPROM settings so that they can play PAL software on an NTSC Xbox, or vice versa.
harrytasker points out that using the Enigmah PAL-NTSC switcher can possibly restore this:
If this fails, the best way to fix this problem is to backup everything on your HD and start the HD locking/prepping procedure all over again, using your old EvoX backups (YOU DO HAVE THESE, RIGHT?), and ATAPWD/HDDUNLOCK/LiveInfo. Don't forget to copy your Live account to a memory card. Once you've completed this procedure, copy your Live account back, and try to connect to Live. You should connect successfully.
You do *not* need to replace your EEPROM because of a C1/C2/C3/8A error.
And the moral of the story? Quit mucking around with your region settings.
Z. The last row (a.k.a Z) has to do with packets and trashed responses. The first 4 numbers deal with response on whether is banned, will be banned, or is not banned. The last 4 numbers are a combo. The first two (19 generally) have to do with which live region your in (dont ask) the second two have to do with packet receiving. D is no packets, C is two packets one trashed, 17 is trashed but readable packet. 0000 is any amount of none trashed packets.
A good code should look something like this:
X: 0000-F021
Y: 00A8-4840
Z: 0000-0000
You Cannot Change Your XYZ Codes!
And even if you could it would do nothing!
This is what I have deciphered and I believe it is 99.9% correct. I hope it is of some use to Zander, Opjose, Undead, and others. Thanks for your time
How To Get Your XYZ Info.
ATTENTION, THIS TUTORIAL ASSUMES YOU HAVE ALREADY FULLY INSTALLED XBOX LIVE!
1.Turn off your modchip and go to the Xbox Dashboard.
2.Click on the Xbox Live Tab.
3.Go to Network Connections.
4.Wait for the Green Lights (or red X'es depending on your setup) to load.
5.Once they load highlight the help button.
6.Over the help button press the Y button.
7.An X code a Y code and a Z code will come up along with more packet data including upload and download speed.
8.Take note of these Numbers.
9.Post results in Xyz Code, Uncoded on the Xbox-Scene forums in the Xbox Live section
On another note,
Some people do not get this. I am going to have to say this for everyone who does not listen to a thing me, kickace, or opjose (or undead or etc) says.
Changing your XYZ Codes will do nothing. The XYZ codes are codes that deliver information about your system in data format. They do not relate to anything about being banned, they only tell you if you are or will be banned. People dont understand. CHANGING YOUR XYZ CODES WILL NOT UNBAN YOU EVEN IF YOU FIGURED OUT HOW i hope this helpes opjose and undead answer all the posts about people wanting to change their xyz codes.
Editing Your Eeprom Will Give You A Bad Code And Will Not UnBan You!
-Fuzzy (yes i realize i have typed this before but noone sees it because its in the middle of the xyz post.
Thanks To Shanafan, Cutriss, Opjose, Undead, and all the others who are working to make it easier to not get banned and help if you are!-
Title: Help for XYZ Live codes - See if you are banned
Post by: Icculus on November 26, 2002, 09:10:00 PM
-
great job fuzzy...i look forward to getting started with live when i get it tommorrow. i'll let you know the results of the connection test.
This post has been edited by Icculus: Nov 27 2002, 05:10 AM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: pride on November 26, 2002, 09:43:00 PM
-
ok mr fuzzy riddle me this then!
i edited my eeprom for the fuck of it and put in different values in for serial, online key, mac address & hd key and my X Y & Z are
X: 0000-F001
Y: 00C2-01E4
Z: AFFF-0018
the numbers are checksums brought up from the eeprom somehow but i don't know yet.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Oger on November 26, 2002, 10:35:00 PM
-
very nice man man...
ill try and fudge with numbers this weekend
-
Title: Help for XYZ Live codes - See if you are banned
Post by: emoney on November 26, 2002, 11:15:00 PM
-
never been modded xbox...
all settings automatic...
X: 0000 - F001
Y: 00A8 - 4860
Z: 8015 - 1917
dns manually entered...
X: 0000 - F009
Y: 00A8 - 4860
Z: 8015 - 1917
ip and dns manually entered...
X: 0000 - 000D
Y: 00A8 - 4800
Z: 0000 - 0000
mess with the ip address so it can't find ip...
X: 8001 - 0605
Y: 0000 - 0000
Z: 0000 - 0000
mess with dns server so it can't find it (ip manually entered)...
X: 0000 - 000D
Y: 008C - 0000
Z: 0000 - 274C
mess with dns server so it can't find it (ip automaticly found)...
X: 0000 - F009
Y: 008C - 0060
Z: 0000 - 274C
everything automatic, but block necessary ports so live can't be found on router...
X: 0000 - F001
Y: 0088 - 1C60
Z: 8015 - 1917
there ya go.. use this info as you will
-
Title: Help for XYZ Live codes - See if you are banned
Post by: The One on November 27, 2003, 07:51:00 AM
-
Wassup Everybody?
I'm from Amsterdam (The Netherlands) and I have a Chameleon Chip 1.5.
Like many of you, I accidently went online with the chip. Only my problem was that I went online with my old harddisk (I have a 120Gb installed now). So I don't know wether the chip was on or off. And I don't know if the following stats say that I'm banned....
Her are my stats when I press Y
1.00.4920.01
X:0000-F001
Y:00C2-03E0
Z:8015-1917
UL: 0 Kb DL: 0 Kb
L: 0 ms (0 ms) P: 0/0
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 27, 2003, 08:30:00 AM
-
Try reflashing the same eeprom your using now and report back.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: camblonie on November 27, 2002, 11:17:00 AM
-
Nice job guys. It seems like there is some hope here but not much interest from the hardcore hackers?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Danny-B- on November 28, 2003, 03:11:00 PM
-
I`m soo pissed off , i just bought rainbow six 3 and tried to log onto xbox live (chip disabled) and got a "Xbox Live Not Found" error modified xbox error
as far as i am aware xbox live hasnt been activated whilst the mod chip has been enabled, could the new games have mod chip detection built in ?
anyway if you still are reviewing codes
V1.0 xbox using a Xecutor 2.2 pro, bios 4979_06 , evox 3921
have played xbox live for at least 6 months with a mod chip inside my box (disabled of course)
Retail Hdd
512k dl 256k up ADSL tiscali ISP internet connection
strange enough i have codes
1.00.5659.03
W:0000 - 000B
X :0000 - F001
Y :00A8 - 6860 <-what a surprise a 6
Z :8015 - 190D
by the way every setting is on Auto
I really dont know how my xbox was detected, all i know is that i started up with rainbow 6 3 in and bang goes my xbox live
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 28, 2003, 07:34:00 PM
-
http://xbox-scene.co...prom-change.php Theres one right out of the tuts section, you could have looked. Theres also configmagic 2 which is a great eeprom flasher and all around lock unlock tool.
And sorry danny b your banned, but thanks for the codes.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 27, 2002, 05:55:00 PM
-
C2 and AFFF mean major difficulty within the system processor. Thats about all i know about those codes right now. Thanks for all your help, im looking into this more.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 27, 2002, 06:50:00 PM
-
By the way, some xboxes will have differnces in the letters, it depends on the date the box was bought, where it was bought, and how long it has been modded (while being banned)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: wildbill on November 29, 2003, 01:12:00 PM
-
Here are my Codes:
W 0000 - 000B
X 0000 - F001
Y 00C2 - 01A4
Z AFFF - 0018
I have an Xbox Version 1.5 with an DMS X B.I.T. Mod. I know I am not blocked because I was never able to create an account with M$. I keep getting a error saying unable to find Xbox Live. I know all my network settings are correct (they have been checked 100s of times). The only thing I can come up with is that it is my EEPROM. When I installed the Mod and new BIOS=Evox M7 and Evolution 3921. This install was done using Slayers Evox V2.5. I went in to the program Config Majic to check my Mac address and acidently changed my S/N to 01010101010 buy telling it to load from the system or something like that. When I couldn't get it back I manualy input the correct information, but as you can see I am not able to connect to Xbox Live.
Mabe you can help me in recovering from my errors.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: CZECH on November 29, 2003, 01:17:00 PM
-
Cutriss thanx for the offer of help....I am looking for a tutorial that is for Windows XP...I need one that explains what to do in order to LOCK the drive...I dont care about anything else but getting this drive locked...If there is anyone in the Los Angeles area that wants to try it let me know otherwise I would greatly appreciate a step by step
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Icculus on November 27, 2002, 09:16:00 PM
-
Hmmm....modded xbox. Matrix that has been in mode 1 since i installed live this morning. Which, btw, is running fine.
0000-F001
00A8-4860
8015-1917
This is the same thing as emoney's original xbox. Therefore 8015 does not equal ban? Cause due to 4860, it should mean that my box is unmodded? hmmm....somethings not right.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 29, 2003, 04:36:00 PM
-
You want to lock it? Just use configmagic 2 (usual places)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: cbworks2000 on November 29, 2003, 06:35:00 PM
-
Since I cant Update to the newdash I thought maybe my box was baned. (ive never played live since my box has been modded+never had it hooked up to the internet) Everytime I log into xboxlive it says i need to update.... I hit ok.....Next thing i get is a mesg sayin "Unable to continue due to tecnicul difficulties please try again latter. So here is my x, y, z coeds of when the cat5 cable is unpluged. (I cant load live cause when i plue the cable in it says i need a update, NO OPTION)
x:8000-0011
y:0000-0000
z:0000-0000
Any Ideas of how I can update?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 30, 2003, 08:59:00 AM
-
Oh sorry, i just had the feeling the problem had been taken care of and this was something new *embarrassed*
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Auslander on November 30, 2003, 11:18:00 AM
-
having the exact same problem (same XYZ codes) with a 1.0 xbox, using an X2.1 Lite chip.
Tried reloading the eeprom with config magic, didn't help. Codes didn't change.
ANy other suggestions?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 28, 2002, 09:56:00 AM
-
no i said 4860 means mod has not been detected/banned.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 02, 2003, 09:29:00 AM
-
Hmm, I know it may be a little annoying but its for the sake of science. Would you try swapping back your other HD to see if your codes change...it would be a great help. If you do post the codes. If the other hard drive doesnt change anything, i might be able to hook you up with an eeprom for the service.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: neejoh on December 04, 2003, 06:56:00 AM
-
X: 0000-000B
Y: 00A8-6800
Z: 8015-190D
1.00.5659.03
Getting an Error Modified Error
XBOX 1.0 PAL Disable switch for Matrix
-
Title: Help for XYZ Live codes - See if you are banned
Post by: thepro8 on December 04, 2003, 08:44:00 PM
-
W: 0000-000b
X: 0000-f021
Y: 00c2-03E0
Z: 0000-0000
I'm using xbox v1.0 got banned, replaced eeprom and this is what I got. I am using a x2 lite, but it's turned off. The EEPROM I bought was originally PAL, but I changed it to NTSC. I can't figure out what's wrong. I actually have some of this info in one other post, but i thought it would be good here since this is a more proper place.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: blind187 on December 06, 2003, 02:42:00 AM
-
Heres my XYZ's:
W: 0000-000b
X: 0000-F001
Y: 00A8-4860
Z: 0000-0000
Version 1.1 PAL , X2 lite , 160gb samsung hard drive , auto ip configuration
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 06, 2003, 04:14:00 PM
-
Yea thats a real odd one. Curtiss did discover that had something to do with non-matching data or something similar to that. Could we have some more info?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 07, 2003, 08:40:00 AM
-
Im sorry i have to yell but
DONT EDIT YOUR EEPROM UNLESS CHANGING THE REGION
I have recieved 20 Pms in the last two days from people with c codes and when i ask for details, they're like "i changed my hdkey to get unbanned"
STOP EDITING YOUR EEPROM, AND IF YOU SCREW IT UP, NO I WILL NOT HELP YOU
Sorry once again to be so blunt
EDIT: The first thread has been updated and if you havent read it in a while you might want to go back and do so (btw Cutriss i added you to the thanks list on the bottom)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 07, 2003, 12:05:00 PM
-
Oops, went back and i missed that and sorry, curtiss cutriss...very similar, fixing and fixing.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 08, 2003, 02:52:00 PM
-
Also please do not PM me and post in the thread. Id prefer if i recieved no pms. All things can be answered more efficiently in the thread.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cutriss on December 08, 2003, 03:11:00 PM
-
I need some info on the order of things.
1. Bought the box in/from Japan.
2. Modded it.
3. Upgraded the HD successfully.
And then later...
4. Changed EEPROM region to US.
Is that right?
I'm thinking that you might have try this:
1. Change your EEPROM region back to Japan.
2. Back up in EvoX (get your EEPROM.bin)
3. Unlock the HD.
4. Change the settings in the EEPROM.
5. Lock the HD again with the changed EEPROM.
6. NOW update the EEPROM on the Xbox.
See how that goes.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 01, 2002, 09:59:00 AM
-
*Bump*
-
Title: Help for XYZ Live codes - See if you are banned
Post by: crazyj0202 on December 14, 2003, 06:33:00 PM
-
You stated that
If I do have the data, how do i fix it??
By the way, my xyz is
X:0000 F001
Y:00C2 03E0
Z:0000 0000
Im not sure if I am banned or not. When ever I try to connect to Live on the last tab it says XBOX Live cannot be found. I dont know if i accidentally messes my eeprom up or what, I have a backup of it so that is why I asked above.
Does my xyz appear to be banned?
The 00C2 is what threw me off because it said that it could be due to unmatching data.
I didnt know if I am banned or it I just have some network settings wrong, or if my eeprom is messed up.
Thanks for the help.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Weable on December 15, 2003, 02:32:00 PM
-
Interestingly if I go back to my original Xbox HD, I get a message indicating "modifed hardware" and the following XYZ indicating a ban:
X:0000 F001
Y:00A8 6860
Z:8015 190D
If I go back to my 120 Gig HD, I get a message indicating "Xbox Live not found" and the following XYZ:
X:0000 F001
Y:00C2 03E0
Z:0000 0000
Any thoughts? Is my box banned or not?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Weable on December 15, 2003, 02:38:00 PM
-
Interestingly if I go back to my original Xbox HD, I get a message indicating "modifed hardware" and the following XYZ indicating a ban:
X:0000 F001
Y:00A8 6860
Z:8015 190D
If I go back to my 120 Gig HD, I get a message indicating "Xbox Live not found" and the following XYZ:
X:0000 F001
Y:00C2 03E0
Z:0000 0000
Any thoughts? Is my box banned or not?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Orangey on December 16, 2003, 05:55:00 PM
-
Here are My Numbers. From what I read all of the previous 28 pages, I Shoudn't Be Banned... Let Me Know If I Am
X: 0000-F001
Y: 00A8-4860
Z: 0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Orangey on December 17, 2003, 12:23:00 PM
-
If your "Y" Code is "6840" for the Second Half. Your Banned, Somehow you accidentally went into XBOX Live with the Chip On...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 18, 2003, 03:15:00 PM
-
Yea your pretty permanently blocked unless you flash yourself a non-banned eeprom. Most times people dont even notice they log on with their chip on (its usually that damn live aware crap). Sorry man. Be more careful next time (only plug in your net-cable when your sure your chip is off or your sure the game your playing isnt live aware.)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 20, 2003, 10:39:00 AM
-
No your not banned, as for being tagged it was determined that the previous method was wrong and as of yet we have no information on how to find out if you are tagged. But like i said, your codse look fine for now.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 03, 2002, 06:46:00 PM
-
*Bump* Just an update, This is for all newbs
IF YOUR SECOND Y CODE BEGINS WITH A 6 YOU ARE BANNED. SO FAR NOONE TO BE BANNED HAS EVER HAD ANYTHING OTHERWISE. THIS IS THE EASIEST WAY TO TELL.
I would appreciate if some more people (banned and not) posted their codes.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 03, 2002, 06:02:00 PM
-
indeed i will have to work on 8015 thanks.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 03, 2002, 06:03:00 PM
-
WHOA! thanks dude ill check this sh!t out. (I NEED MORE POSTS LIKE THIS PEOPLE)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: quisp on December 03, 2002, 09:22:00 PM
-
For what it's worth,
Enigmah'ed box, banned, manual IP settings:
X: 0000 - 000D
Y: 00A8 - 6800
Z: 8015 - 190D
with auto IP settings:
X: 0000 - F009
Y: 00A8 - 6820
Z: 8015 - 190D
BTW - I was fine during the beta2 period with a mod enabled - it wasn't till retail that I got banned, even though by then I had installed an off-switch. Is this generally the story, or weren't some people banned during beta? I'm wondering why I wasn't. Sorry if I've missed this buried in the threads.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: undead on December 04, 2002, 02:25:00 AM
-
for what it's worth...
Messed up Serial, MAC, Online Key and HDD Key...
---------------------------------------------
Internet Connection Online - All Auto
X: 0000 - F001
Y: 00C2 - 01C4
Z: AFFF - 0018
Router cable unplugged (offline) - All Auto
X: 0000 - F001
Y: 00C3 - 0040
Z: 0000 - 274C
Internet Connection Online, xbox and kerberos Ports Blocked (dns resolves, but nothing else)
X: 0000 - F001
Y: 00C2 - 03C0
Z: 0000 - 0000
Valid Serial, MAC, Online Key, Only Messed up HDD Key...
-------------------------------------------------------------------------
Internet Connection Online - All Auto
X: 0000 - F001
Y: 00C2 - 01C4
Z: AFFF - 0018
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Penfoldian on December 24, 2003, 08:38:00 AM
-
am i banned,
W 0000 000B
X 0001 8005
Y 00A8 4800
Z 0000 0000
i accidently went on for a min or two with the mod on...
what u think?
Btw it still connects but can play games at the mo, i'm still investigating
-
Title: Help for XYZ Live codes - See if you are banned
Post by: xdrei on December 04, 2002, 02:47:00 PM
-
Enigma'd xbox before i installed startup disc, since before installing live enigma has always been out of the xbox. Works on Live fine (i traded my original banned xbox with a friend who wasn't gonna buy live).
so no mod chip in, there used to be one (enigmah), and xbox live works:
X:0000-F001
y:00A8-4860
Z:8015-1917
although i have 8015 on z, i'm not banned because it works (hopefully it doesn't mean they are waiting to ban me)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: exoxe on December 26, 2003, 10:34:00 AM
-
I'm still curious as to where to get the XYZ information. The directions on the first page just don't add up to what I'm seeing on my screen.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 26, 2003, 12:41:00 PM
-
How so? Any Specific problems or things you dont see?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: cbworks2000 on December 26, 2003, 01:38:00 PM
-
ROFL, I really dont think someone is going to give up a epprom for free.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: tcar on December 26, 2003, 02:44:00 PM
-
I'm thinking changing the HD's around isn't going to help
To make this work again what ID's do I need? just a new valid S/N...?
Thanks
Luke
-
Title: Help for XYZ Live codes - See if you are banned
Post by: dexthageek on December 26, 2003, 04:11:00 PM
-
I got Rainbow Six 3 yesterday for christmas Xbox Live has been working great for aprox 4 months with a modded xbox, well now I get that damn "Modified Hardware or Software" error.
Here are my codes
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 190D
There is a cash converters about 30minutes from my house, I think im just gonna pick up a used Xbox from there and use it only for Xbox Live.....
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 26, 2003, 06:19:00 PM
-
*Tcar stop spamming the thread and learn to edit*
Guys remember this is very important
On new games you dont have to click the live tab to get banned. The live aware games check for your modchip too. Always unplug your cable when playing any live game ever unless your chip is off and never go the the main page with your chip on
-
Title: Help for XYZ Live codes - See if you are banned
Post by: scoobster on December 04, 2002, 05:32:00 PM
-
I knew there was something boxside, this smells like real progress, way to go fuzzy
-
Title: Help for XYZ Live codes - See if you are banned
Post by: admiralj on December 26, 2003, 07:30:00 PM
-
so not withstanding flashing with a new eeprom, is there any way to recover from an "Xbox live not found" y:00c2 message when connecting to Live?
The ONLY thing i have done with an xbox that is generating this message is install a 120gb wd HDD in it. It has a bioxx v4, but it has always been disabled when booting to the ms dash. Someone in this forum said that it may have something to do with the way the hdd was locked - I used config magic... i'll try it with atapwd to see if that matters at all.
suggestions as to what i should do if that doesnt work would be greatly appreciated.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on December 04, 2002, 05:19:00 PM
-
im working on 8015, right now it seems to have to do with (dum dum dum) the first 16 bytes of your eeprom!!!! (aka hdkey) thanks to all you (especially undead for F*king everything up for me hehe) ill get cracking and keep posting!!!! (for once i feel like im really helping something. I could be the modders xyz decoder! MS has one, why cant we! lol )
-
Title: Help for XYZ Live codes - See if you are banned
Post by: PhReaK on December 27, 2003, 03:20:00 AM
-
these are my codes
Xbox 1.1 with xecuter 2.0 lite with switches, upgraded 40gb hd, theoretically not banned, ip configured manually, dns automatic, still have to create an account:
W: 0000-000B
X: 0001-8005
Y: 008C-0000
Z: 0000-274C
i just want to know if everything is ok, will let you have the codes after i create my account
-
Title: Help for XYZ Live codes - See if you are banned
Post by: jamminj606 on December 04, 2002, 10:17:00 PM
-
Here are my xyz numbers on a multibios tsop flash and a switch(its been flashed a few times with different bios). I'm using 4034 standard bios for live and evox2.5 ybox for mod fun. All setting are the auto defaults.
I've been running live for a week now with no problems(keeping my fingers crossed) I only use it under the 4034 bios for online play with retail games.
X: 0000-F001
Y: 00A8-4860
Z: 8015-1919
This post has been edited by jamminj606: Dec 5 2002, 06:20 AM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: tcar on December 28, 2003, 12:18:00 PM
-
New EEPROM Installed and Live is now working.
While fiddling with this I found out the following:
1. If you use a static IP in the MS Dash and you have XBOX MediaPlayer also configured with a static IP the XBMP IP, Subnet and gateway is updated on the MS Dash (DNS does not seem to be effected). Is this correct! So I would also suggest that you either supply the wrong gateway or use a DHCP (UPDATE: Unable to test as XBMP running under EVOX when using DHCP causes XBMP to crash and with use static IP - maybe someone else can test) under XBMP, as if you accidentally open the MS Dash you would instantly be connected to live and banned.
2. Even supplying the wrong DNS addresses doesnt seem to stop the XBOX from connecting to live the only way to stop live connectivity is to supply the wrong gateway or remove the cable.
So this could now lead to think why I had a problem as the day before I was banned I had changed the XBMP gateway to be valid and then enter the MS Dash (the gateway kept changing and I didnt understand why). I was able to play on live the following day in the morning, but in the evening I was then banned. I also had configured auto-login as DISABLED and Controlled PIN enabled when accessing Live these didnt appear to stop me from being banned. This is the only way I can explain why I was banned unless something else had happened
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Webstarr on December 29, 2003, 04:24:00 AM
-
Quick Question...
What if you cannont get to your XYZ codes because when u click on the xbox live tab it says it has to update but when it tries to update, it says i cant connect? am i banned?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: AnThRaX on December 29, 2003, 06:59:00 AM
-
I have a contest im holding in my BST thread its best reason for why they need it or they could be chosen at random also giving away free subscribtion codes for live. Check it out. I choose winners every day or 2 at midnight
Post by: killah2k3 on April 04, 2003, 03:39:00 AM
W:0000-000B
X:0000-F001
Y:00A8-4840
Z:0000-0000
the matrix is enabled when i go to xbox live tab
and it says xbox live connected....
does this mean i am not bannned ?
HD is also a 30gig one locked
Post by: bearauto on April 04, 2003, 08:39:00 AM
| QUOTE (killah2k3 @ Apr 4 2003, 03:39 AM) |
| hey all i got a matrix on mode 3 .... this is my XYZ code .... im in canada W:0000-000B X:0000-F001 Y:00A8-4840 Z:0000-0000 the matrix is enabled when i go to xbox live tab and it says xbox live connected.... does this mean i am not bannned ? HD is also a 30gig one locked |
Yeah, accessing the LIVE tab while the modchip is activated will get you banned...
Post by: psibob84 on April 04, 2003, 03:06:00 PM
All settings are manually entered and the xbox is NOT banned
X:0000-000D
Y:00A8-4800
Z:0000-0000
Post by: Fuzzy on April 05, 2003, 07:09:00 AM
Post by: LafferUSA on November 01, 2005, 03:41:00 PM
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z: 0000 - 0000
L: 0 ms (0 ms)
P: 0/0
-------------------------------
1.00.5971.01
MT: 1 (0015 - 00F0)
IC: 1 (0015 - 00F0)
NT: 0
Do I have that unsolvable issue?
Post by: sidewinder33 on November 01, 2005, 05:52:00 PM
QUOTE(LafferUSA @ Nov 1 2005, 03:52 PM)
1.00.5971.01
-
Title: Help for XYZ Live codes - See if you are banned
Post by: LafferUSA on November 02, 2005, 03:03:00 PM
-
How does the EEPROM get corrupted, and can I reflash it with ConfigMagic?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: killah2k3 on April 05, 2003, 09:48:00 AM
-
after 2 days ... banned
W:0000-000B
X:0000-F001
Y:00a8-6840
z:8015 - 190D
looks like most of em
now gonna flash other eeprom hehe
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on November 02, 2005, 07:13:00 PM
-
Its never been concluded on why it get corrupted, and yes you use configure magic to reflash it.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: LafferUSA on November 02, 2005, 11:58:00 PM
-
Alright I got a new eeprom, but when I try to change it, I can't. I use ConfigMagic. And here is what happens.
I follow these exactly...
-Move the EEPROM.BIN file into that DATA directory, overwriting the EEPROM.BIN file that is already there.
-Load up Configmagic.
-Select "LOAD XBOX EEPROM" in the menu.
-Select "UNLOCK HD" in the menu.
-Load the EEPROM.BIN file in the DATA directory by choosing "LOAD EEPROM FROM .BIN FILE"
-Now, select "UPDATE XBOX EEPROM" in the menu.
-In the menu, select "LOAD XBOX EEPROM". You will notice your EEPROM is now different! Success
-Select "LOCK HD" from the menu.
At the end when I hit LOAD XBOX EEPROM, it goes back to my original EEROM. The keys are different before when I hit UPDATE XBOX EEPROM. But as soon as I hit LOAD XBOX EEPROM my original goes back. So I just lock it and go back to normal.
What the hell is wrong. I tried about 3 new EEPROMs.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: celare on November 06, 2005, 01:23:00 PM
-
Hi, just thought I'd chip in here. I was getting the Y: 00C2 code in various forms with various eeprom.bin files I tried. It turned out the problem was that I was loading the eeprom.bin file in ConfigMagic, then editing it and then flashing it. This always resulted in a 00C2 code. What I had to do to get it working was open the eeprom.bin file and then flash it WITHOUT MAKING ANY CHANGES, then load it from the Xbox and edit it before finally reflashing it. It seems you can't make on the fly edits to an eeprom unless you've already flashed the eeprom in its unaltered state. The Enigmah video switching didn't help in any of my 00C2 cases. Hope that helps someone out.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on April 05, 2003, 06:38:00 PM
-
yea nothin new here, banned
-
Title: Help for XYZ Live codes - See if you are banned
Post by: M@rtin on April 08, 2003, 01:56:00 AM
-
I haven't signed up for Live yet (get the pack tomorrow), but I thought I'd check to make sure I can at least get to the signup part first... I thought that I might be banned as someone (not me!) ran the live update from Unreal Championship and it tried to connect but came up with "Xbox Live not found" - at the time I didn't have a switch fitted.
So over the weekend, I got a switch put in and tried again... I have a Netgear MR314 wireless router which needs a little configuration - check this link for some help with getting connected: http://www.ugvxfaq.pwp.blueyonder.co.uk/livefaq.htm - basically there are workarounds for certain routers such as mine...
Anyway to cut a long story short, it eventually worked and and I got to the signup screen Going back to the network setup, I get these codes:
W: 0000-000B
X: 0000-000D
Y: 00AB-4800
Z: 0000-0000
This is with a Pal xbox, lpc cheapmod, retail HD with evox bios/apps loaded, and the switch off. Connection through netgear router as mentioned, manual IP/DNS settings, xbox IP added as DMZ server in router config... hopefully that's all the info you need?!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: rasstar on December 07, 2005, 11:27:00 AM
-
Man the C2 error is driving me nuts. i never made any changes to any of the eeproms. My original eeprom was banned from live and when i try a new eeprom I get xbox live not found and it shows the c2 error. I also installed a new hard drive. I tried multiple eeproms with the same result.
is there any solution to this problem? Anyone have any ides on what i can do?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on December 10, 2005, 10:17:00 PM
-
Alright I got a new eeprom, but when I try to change it, I can't. I use ConfigMagic. And here is what happens.
I follow these exactly...
-Move the EEPROM.BIN file into that DATA directory, overwriting the EEPROM.BIN file that is already there.
-Load up Configmagic.
-Select "LOAD XBOX EEPROM" in the menu.
-Select "UNLOCK HD" in the menu.
-Load the EEPROM.BIN file in the DATA directory by choosing "LOAD EEPROM FROM .BIN FILE"
-Now, select "UPDATE XBOX EEPROM" in the menu.
-In the menu, select "LOAD XBOX EEPROM". You will notice your EEPROM is now different! Success
-Select "LOCK HD" from the menu.
At the end when I hit LOAD XBOX EEPROM, it goes back to my original EEROM. The keys are different before when I hit UPDATE XBOX EEPROM. But as soon as I hit LOAD XBOX EEPROM my original goes back. So I just lock it and go back to normal.
What the hell is wrong. I tried about 3 new EEPROMs.
Do you have a backup of you old eeprom on your hdd? If you do it might explain this. Other than that I can't tell you what to do. I mnot all that familiar with configure magic. I use my chip os to do all my mucking.
Thought I'd add my comments, basically was having trouble and getting this:
My codes are:
W:0000 000B
X:0000 F009
Y: 00C2 01E4
Z:AFFF 0618
L: 0ms (0ms)
P: 0/0
have xenium, but loading retail bios.
Did a restore setting from backup and hey presto worked. Think I had tinkered with regions settings for DVD.
Ah, gotta love those crazy backups, this is an example of just how sensitive eeproms are.
Here are my codes
W 0000 - 000B
X:00c2 - 03C0
Y:00C2 - 03C0
Z: 0000 - 0000
l: 0 MS (0 MS)
The first thing I would suggest is reflash your eeprom from your backup. if you dont have one then just about the only fix is to get a new eeprom.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on December 12, 2005, 11:54:00 AM
-
I got a new eeprom from Xodiiak and it gave the same error. Got another eeprom from a friend who never use Live and it worked.
hhhmm odd xodiiak or zodiiak? Zodiiak is one of the most trusted eeprom sellers on the scene. I'm sure if you told him that it didnt work he would have gladly given you another. good that you got back on live. Make sure that you save a backup right now. this will save you many headaches later on if your like me and you f with shit.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: allstar1710 on December 12, 2005, 01:30:00 PM
-
Ok, here are my codes:
For the first window (W,X,Y,Z codes):
W: 0000-000B
X: 0000-F001
Y: 00C2-01E4
Z: AFFF-0018
L: 0 ms (0 ms)
For the second window:
MT:1 (0015-00F0)
IC:1 (0015-00F0)
NT:0
I have a new HDD and a new eeprom in that made those numbers come up.
I used configmagic to put them this eeprom in. Is there a problem with how the HDD was locked, or is it another problem that is fixable?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: rasstar on December 12, 2005, 02:15:00 PM
-
Where did you get the eeprom? I feel the reason we receive the error is because the eeprom is married to another hard drive. It has nothing to do with editing because I never edited mines and i got that error. Or it could be something with config magic but I tried other flashing apps and i got the same error. Seem as if no one can figure it out.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sidewinder33 on December 12, 2005, 04:52:00 PM
-
from my understanding and this may not be correct anymore, but editing the eeprom almost always messes it up. one thing a lot of eeprom resellers do is take one eeprom and try to edit it, sometimes i guess it works but from what we see most of the time it doesnt.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: allstar1710 on December 12, 2005, 07:57:00 PM
-
I bought my eeprom from gazeddy who is another seller on here.
I have not edited my eeprom and I've followed all of the instructions for how to put it in.
I am going to try and use another HDD locker and see if that fixes my problem.
Any other suggestions though?
I don't really want to pay for another new eeprom, but if I don't have a choice then I guess I will.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: rasstar on December 12, 2005, 11:01:00 PM
-
There is nothign you can do but get another eeprom. None of those things work ...using another HDD locker will not solve the problem but go ahead and try. Email the seller and have him send you another eeprom.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: M@rtin on April 09, 2003, 04:16:00 PM
-
OK, the pack arrived today and guess what? "xbox live not found" - DAMN!!! My XYZ codes haven't changed though, so does that mean I'm not banned or what?? Majorly confused now
-
Title: Help for XYZ Live codes - See if you are banned
Post by: deadline123 on December 20, 2005, 03:59:00 PM
-
Well here are my codes...i was using a softmod and was using unleashX as my dash. I was coldbooting to get on live and i wasnt cheating or anything i was just lazy to restore the ms dash when i wasnted to go back on live. It was working fine for over 2 weeks. I tried to sign on today and i get the good old "you may have modified hardware or software" message.
X:0000-F001
Y:00A8-6860
Z:8015-190D
I'm pretty sure im banned..but i'm kinda new to all this eeprom stuff and if anybody would like to help me out , i'd really appreciate it..just kinda fill me in on what i need to do/get to get back on live....thanks
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Hitcher on December 22, 2005, 02:26:00 PM
-
I've not been able to connect to Live for a few days now and the Troubleshooter keeps saying it can't find it.
So I checked my XYZ numbers and they are as follows -
X:0000-F001
Y:008A-0FE0
Z:AFFF-0018
Looking at the first post it appears there's a hardware conflict but how do I fix this?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: allstar17107 on December 22, 2005, 06:21:00 PM
-
Deadline, you are banned and you need to get a new hdd and eeprom to be able to go back on Live.
Hitcher, I had the C2 problem which I think is like the 8A problem. You probably need to get a new eeprom or try the fixes like Enigmah Videomode switcher or alternate hdd locker (from configmagic)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: juanman on December 27, 2005, 03:27:00 PM
-
v1.6 Halo Le Xbox, never touched, i swear
W: 0000-000B
X: 0000-F001
Y: 00A8-6860
Z: 8015-190D
I know the Y shows the 6860 as being a LPC mod, but i never opened the xbox! i logged out of one account, went to log into another and it shows up as being a moddified xbox when i do the trouble shooter! im like WTF!?!?
its never been touched, i have one xbox that i use for modding, it even has a Live blocking bios so i cant even attempt to get onto live. so i dont know, its bullshit. i need my halo fix.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Avrame on December 27, 2005, 07:14:00 PM
-
v1.1 Xbox, modded with a xbit, haven't had problems with live until today (5 months running, no probs till today)
W: 0000-000B
X: 0000-F001
Y: 00A8-6840
Z: 8015-190D
L: 0 ms (0 ms) P:0/0
After I press "B", a screen comes up
MT: 0 (8007 - 274C)
IC: 0 (8007 - 274C)
NT: 0
I'm getting a moddified xbox alert now...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Avrame on December 27, 2005, 07:44:00 PM
-
You in the USA?
Maybe just my guess... but could xbox be banning all non USA xbox in the USA? Like with my eeprom, it came from overseas, I think france, but I just got a new hdd, flash the eeprom, lock the hdd and it worked for a good 5 months. Perhaps after this xmas, MS is gettiong paranoid with all the 360's floating around, and put up a new wall of security to watch for the import japanese 360's, seeing that they are going for $150, and are well in stock in japan.
As far as I'm concerned, the japanese 360 do play some american games, are alot cheaper for the bundle, and are easy to import, maybe MS doesn't like that, so they are attempting to ban all xboxes in the USA that aren't american made eeproms. The 1.6 Halo LE is a canadian xbox right? And from your claims, it is a virgin... that's my explanation for it so far.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: juanman on December 27, 2005, 10:57:00 PM
-
my Halo Le xbox was purchased at a local Best Buy, no importing what so ever.
i determined it was a 1.6 by the manufacturing date, dash, kernel, and some other stuff.
but yeah, i called customer support, talked to the supervisor, and they said it should be fixed in 48-72 hours.
kinda long since some of my friiends are online playing now on their Xbox's
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Avrame on December 27, 2005, 11:57:00 PM
-
Hmm... well i hope that this problem gets solved for you asap. I understand that I'm not obligated to play on live seeing that I modded my box, but it just pisses me off that it worked for over 5 months up to this point. Well, drop me a line when yours gets online. I have the same XYZ codes as you, and I hope my problem will get fixed as well.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: BansheeTwin350 on December 28, 2005, 08:46:00 AM
-
I too had the same codes:
X 0000-F001
Y 00A8-6840
Z 8015-190D
And it now comes up and says my XBOX is modified. I have been using live for about 3 months now and nothing has changed on my side. I called xbox.com and they said that they did an update on their system at midnight Monday night. Not sure if that is true or the guy I was talking too was full of it. Anybody else have any ideas on what this could be before I go buy another XBOX?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Avrame on December 28, 2005, 06:20:00 PM
-
Yay! my numbers changed, no more modded box error, just communication error
W: 0000-000B
X: 0000-F001
Y: 00A8-4840
Z: 0000-0000
L: 65535 ms (65535 ms) P:0/0
After I press "B", a screen comes up
MT: 0 (8007 - 274C)
IC: 0 (8007 - 274C)
NT: 3
-
Title: Help for XYZ Live codes - See if you are banned
Post by: juanman on December 28, 2005, 07:03:00 PM
-
ill check mine later and post the new ones.
maybe this could help some of you with the 6860 code
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Avrame on December 29, 2005, 04:58:00 AM
-
uh-oh... seems that other people's xbox are getting back on live, however, mine changed back to a modded xbox error... crud.
W: 0000-000B
X: 0000-F001
Y: 00A8-6860
Z: 8015-190D
L: 0 ms (0 ms) P:0/0
After I press "B", a screen comes up
MT: 0 (8007 - 274C)
IC: 0 (8007 - 274C)
NT: 0
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Avrame on December 29, 2005, 09:03:00 AM
-
Hmm... in my opinion, for you at least... for the mean time, you COULD always buy one at wal mart or best buy. They'll accept console returns within 30 days, so you can get your fix on the legit console for the time begin, then return it before you leave on break.
As for me, I dunno. My xbox went from the "modded error" to the "connection error", then back the the "modded error" in the course of 2 days. I was tempted to call up MS, but seeing that I had opened my xbox, I have nothing to say in my defense.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on April 11, 2003, 11:51:00 AM
-
codes...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: M@rtin on April 11, 2003, 03:06:00 PM
-
See two posts above... they haven't changed but I've been getting "xbox live not found" ever since the first time I connected.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: nope2dope on January 07, 2006, 09:08:00 PM
-
well it seems as though everyone else is doing it, so I think I'll post mine two. I have modded 6 xbox's and I own two, and my two bros have two in whole. heres my two xbox's xyz's
They are both this... both v1.6, one has x2 and one x3, both have stock hdd, x3 has 80gb with switch.
x:0000-F001
y:00A8-4860
z:0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on January 07, 2006, 11:12:00 PM
-
Holy crap, I wrote this thread 4 years ago and it's still here.
Man, coming back might be more fulfilling than I would expect...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: AirrezzZ on April 14, 2003, 02:39:00 AM
-
Last weekend I was playing Ghost Recon from hdd (chip on) in coop mode (system link). But the first time I started the game I tried to connect to live (by mistake, offcourse). It starts in the online sign in tab and I went there to account selection and selected my account. It tried to connect to live so I canceled it right away but I'm affraid I will get banned the next time I'll connect. Alltough the xbox couldn't possibly connect to live (cause I had a system link to another xbox) I'm afraid the xbox noted the detection of my chip (Xecuter 2 Pro).
I turned off my chip now
- Here are my XYZ codes, I haven't played live since it tried to connect to live with the chip on. (all green lights)
perhaps something important:
I was playing with my XOBX at a friends house, but the XYZ codes are "made" at my place. So the Xbox haven't had power for say half an hour (driving back to my place and reconnecting it)
X 0000-000D
Y 00A8-4800
Z 0000-0000
IP and DNS are set manualy, the rest is disabled (PPPOE and advanced settings)
I live in the Netherlands and got an ADSL basic (756DL x 128UL) connection
- XYZ with IP automatic and DNS manual (all green lights)
X 0000-F009
Y 00A8-4860
Z 0000-0000
- XYZ with IP manual and DNS automatic
got a DNS error
cables connected
IP not confirmed
DNS not resolved
Xbox Live not found
X 0000-0013
Y 0000-0000
Z 0000-0000
- XYZ with IP and DNS automatic (all green lights)
X 0000-F001
Y 00A8-4860
Z 0000-0000
- XYZ with IP and DNS automatic, cable not connected
X 8000-0011
Y 0000-0000
Z 0000-0000
got same XYZ with IP manual DNS automatic
got same XYZ with IP automatic DNS manual
got same XYZ with IP and DNS manual
---------------------------
Looks like I'm not baned (yet)
I haven't read this whole topic so perhaps the following question has been asked and aswered earlier:
Will my xbox remember I tried to connect to live with my chip on even though there was no connection to live (cause I had a systemlink cable to another xbox)??
-
Title: Help for XYZ Live codes - See if you are banned
Post by: nachonut on April 14, 2003, 10:40:00 AM
-
Just because it says xbox live not found, doesn't mean you are banned. I've had problems before with a static ip, try taking that off and connect again. If anything, run the setup from the disc, with a new xbox., sometimes it won't connect to xbox live even if it has the tab
-
Title: Help for XYZ Live codes - See if you are banned
Post by: M@rtin on April 15, 2003, 06:15:00 AM
-
Yeah I thought it could be a temporary problem, but the fact that it was working the day before with exactly the same settings was strange I thought... plus the fact that the "xbox live not found" msg appeared almost immediately after the dns step completed, so it's not like it was looking for a connection and timing out.
In any case, I got a new eeprom today and got on Live no problems, all signed up and playing games - my codes are still the same as before:
W: 0000-000B
X: 0000-000D
Y: 00AB-4800
Z: 0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: A Murder of Crows on February 25, 2006, 09:13:00 PM
-
Help!!!!
X: 0000-F001
Y: 008A-0C62
Z: AFFF-0018
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
NT: 0
Virgin eeprom, new hard drive. Can't c
Problems:
No Live found
no S/N listed
updated eeprom with config magic 1.6 final thru Krayzie's NDure 1.1 Professional Mode.
thanx all
-
Title: Help for XYZ Live codes - See if you are banned
Post by: A Murder of Crows on February 25, 2006, 10:46:00 PM
-
ignore the last one:
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
L: 0 ms (0 ms)
P: 0 / 0
1.00.5971.01
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
NT: 0
S/N is now showing up. Xbox Live not found. No idea as to what to do or where to go next. Contacted Zodiaac about this as it was one of his.
thanx all
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Ndure protagonist on March 03, 2006, 09:18:00 PM
-
A Murder of Crows; although I normally only post re. Ndure, I thought you and/or others might be interested...
As you likely did too, I attempted to find 008A-0FE0 with X-S' pathetic Google search. However, me being me, I then tried Google and one of the corresponding hits (in this very thread) follows:
{8 That's not the only reason I'm sharing though; try to read it without glancing at the next poster's avatar... 8}
http://forums.xbox-scene.com/index.php?act...dpost&p=1862292
{8 Plus, later in that page the same X-S vendor you mentioned supplied the solution to Ghaz ... hmm ... 8}
-
Title: Help for XYZ Live codes - See if you are banned
Post by: b166ir on April 21, 2003, 03:18:00 PM
-
got banned today
here are my codes
i'll just write everything i see
1.00.5335.01
W: 0000 - 000B
X : 0000 - F001
Y : 00A8 - 6820
Z : 8015 - 190D
UL: 0 DL: 0 Kb
L: 0 ms (0ms) P: 0 / 0
-
Title: Help for XYZ Live codes - See if you are banned
Post by: crackz0r on April 21, 2003, 04:18:00 PM
-
hehehe.. when will you kids learn..
-
Title: Help for XYZ Live codes - See if you are banned
Post by: b166ir on April 21, 2003, 04:37:00 PM
-
got a new unbanned eeprom
used eepromer very good program ! very easy to use
now i can go back to live everything works fine
now my codes are
1.00.5335.01
W: 0000 - 000B
X : 0000 - F001
Y : 00A8 - 4860
Z :0000 - 0000
UL: 9765 Kb DL:1154 Kb
L: 157 ms (172 ms) P:20 / 20
-
Title: Help for XYZ Live codes - See if you are banned
Post by: gozer on April 24, 2003, 09:24:00 PM
-
Matrix Mode 3
Evox d.6/2.6
New York City
Locked 120gb Drive
(Not Banned)
Static IP Configuration
x: 0000 000D
y: 00A8 4800
z: 0000 0000
It seems most people with a y: 0000 48** are using evox variant bins (color, different versions, etc)...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: CompFreak07 on June 08, 2006, 06:58:00 PM
-
My xbox says Xbox Live Not Found
Here are my W, X, Y, Z, L, and P codes
W: 0000-000B
X: 0000-F001
Y: 0088-1C40
Z: 0000-0000
L: 0ms(0ms)
P: 0/0
Any Sugegstions?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: LimpNoodle on April 26, 2003, 10:25:00 PM
-
I presume I'm banned.. since I can't even connect with a direct connection from the Xbox to the Cable Modem. FWIW I'm in the UK, using NTL Broadband. All settings below are set to Automatic.
W: 0000 - 0015
X: 0000 - F001
Y: 0088 - 1C60
Z: 0000 - 0000
My Bios details etc are below.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on April 27, 2003, 07:48:00 AM
-
Play around with your settings, if not, reflash your eeprom (the one you have now), if still nothing, new eeprom (report everything to me every step of the way im trying some new stuff)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MD 20I20 on June 29, 2006, 02:45:00 PM
-
rite i am completly confuse i have had 3 accounts on xbox live tha have all been banned i have 2 xbox's and the both come up with 00a8 on the Y thing i am wondering if that is the connection or the xbox. any help please
after reading this topic i am wondering if it is the hard drive in the xbox, the xbox itself, or my connection. i also get the 00A8 code on Y which i think means i am banned but is there anyway to change this
-
Title: Help for XYZ Live codes - See if you are banned
Post by: LimpNoodle on April 28, 2003, 03:43:00 AM
-
Reflashed my eeprom, and sorted out the problem!.. cheers for the help Fuzzy
-
Title: Help for XYZ Live codes - See if you are banned
Post by: killab443 on July 12, 2006, 11:45:00 PM
-
Pulled the following codes from the connection status-
W: 0000 - 0015
X: 0000 - F001
Y: 00C2 - 03C0
Z: 0000 - 0000
MT: 1 (0015 - 00F0)
IC: 1 (0015 - 00F0)
NT: 0
In my connection status my xbox goes threw all steps and it says "xbox live not found" in the last step. I called xbox they said there wasnt a ban on my account. But what else is going on here. I installed evox and thats when my connection stopped working. I am able to ftp and use evox. I even restored it to factory and that did not help the connection
-
Title: Help for XYZ Live codes - See if you are banned
Post by: pricemeista33 on July 16, 2006, 02:39:00 PM
-
Me and my son's box is banned or something. Here are the "xyz" codes as follows:
X:0000-F001
Y:00C2-01E4
Z:AFFF-0018
After trying to go on live there's a message stating that there are technical difficulties and "Xbox Live is not found."
This post has been edited by pricemeista33: Jul 16 2006, 09:40 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: fabbers on July 17, 2006, 02:21:00 PM
-
Not sure if i'm banned won't connect though and states an MTU issue,
X 0400 - F001
Y 00AB - E840
Z 0000 - 0000
L: 0ms
P: 0/0
I'm taking it the latency and p = packets being zero don't bode well either!
Help (IMG:style_emoticons/default/unsure.gif)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: fabbers on July 18, 2006, 01:14:00 AM
-
Not sure if i'm banned won't connect though and states an MTU issue,
X 0400 - F001
Y 00AB - E840
Z 0000 - 0000
L: 0ms
P: 0/0
I'm taking it the latency and p = packets being zero don't bode well either!
Help
D'oh after all my concerns it appears that my default gateway settings on the xbox had changed, the xbox was unplugged for a wekk and when i next used it it prompted for time/date etc. but never double checked the network settings as i thought dhcp would have been fine.
Oh well chalk that one up,
Cheers
fabbers
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Jse on April 28, 2003, 02:05:00 PM
-
ok using a executer 2 chip with on off switch but banned my codes are
w 0000 - 000b
x 0001 - 8025
y 00a8 - 6800
z 8015 - 190d
from what i have gathered as this is like my 10th eeprom is
if you enter the m$ dashboard with the mod on you get banned
even if you dont click on live
ok here is another idead if every on sent a copy of their banned eeproms to a cracker surley he could create a keygen for the serial hdd key and online key which is valid worth a shot
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Chaoswarrior37 on August 15, 2006, 11:50:00 AM
-
I have the Xbox Live not found error, started up about a month ago seemingly without reason.
I have a 1.6 NTSC Xbox with a 160 GB HDD using SP.Ice running X2 BIOS. lol
My account is not banned as I connected on Live with my account on my friend's Xbox without any problem.
I tried using the Enigmah Videomode Switchdisk application to switch it to PAL and then back to NTSC, but all it did was jack up my screen which took forever to revert back to NTSC.
1.00.5971.01
W: 0000 - 000B
X: 0000 - F001
Y: 008A - 0FC0
Z: AFFF - 0018
L: 0ms (0 ms) P: 0 / 0
MT: 1 (0015 - 00F0)
IC: 1 (0015 - 00F0)
NT: 0
-
Title: Help for XYZ Live codes - See if you are banned
Post by: jotavip on August 24, 2006, 02:10:00 AM
-
I am having problems with the xbox live not found error too.
my codes are:
1.00.5971.01
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z: 0000 - 0000
I think is this "C2" that are giving me this error. I tried the ntsc-pal switcher, but no success.
Anyone has any suggestions?
Thanks!!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: theman2004ad on October 18, 2006, 05:26:00 PM
-
Ive been having some strange problems ive never owned a moded xbox and now play on a 360 and xbox live wont let me connect these are my codes if anyone can help
W: 0000-0021
X: 0000-000D
Y: 0C8A-0D80
Z: AFFF-0D16
any help would be great cheers
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Hinotori on May 06, 2003, 09:46:00 AM
-
This is weird, because if it was this way, my XBOX should've been banned since December, when accidentally I let the dashboard execute with the mod on... I wouldn't recommend anyone to try this, but I think that this happened 4 or 5 times, and I'm still enjoying Live!....
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Twagz on December 28, 2006, 03:27:00 PM
-
it fails on IP address and im lost now...
this is the code for ya
W: 0000 - 000B
X: 4000 - 1001
Y: 0000 - 0000
Z: 0000 - 0000
Any help here would be hot
cheers
twagz
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on May 11, 2003, 02:21:00 PM
-
you can go to the dashboard relatively safely (i wouldnt recommend it) but your not always banned.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MadEx on May 11, 2003, 10:13:00 PM
-
I go into the dash and play DVD's often with my modchip on. Matter of fact, the only time I turn my chip off is when I play Live (I leave it on if I'm not playing online). So using the dash with your modchip on doesn't get you banned, as long as you don't use it online.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: BlackRob183 on January 11, 2007, 03:08:00 AM
-
I seem to be having a different problem than everyone else, mine are mostly all Zeros with a few changes (didn't seem to see anyones like this but not sure)
Error Code:
W: 0000-000B
X: 0000-F001
Y: 0000-0000
Z: 0000-0000
That's what happens whenever i try to log onto Live, then I either need to somehow reset my IPs and then it works for a little while again and then after a while it errors out?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TechnoGamer on April 01, 2007, 04:45:00 PM
-
Have softmodded my Xbox with Unleash X. When I go to the network settings in the MS Dashboard. It stops at IP Address. At the bottom it say Xbox Live Not Found. I've been on live before and got banned from Halo 2 Matchmaking. Here are the codes I get:
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 0000-0000
Z: 0000-0000
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
That is with the softmod on, as I get an error 21 if I try to access XBL through an Live enabled game. From coldboot.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bwannon on May 17, 2007, 01:21:00 PM
-
Uh, has MS started banned softmodded 360's?
I all of the sudden can't connect to live, this is the codes test connection gives me for live:
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 6820
Z: 8015 -190D
Any ideas?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: skforty on May 17, 2007, 01:28:00 PM
-
just got some insider info, i think they are going to start banning. I heard about this yesterday. But i dont have all the details yet, what drive and firmware do you have?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bwannon on May 17, 2007, 02:12:00 PM
-
just got some insider info, i think they are going to start banning. I heard about this yesterday. But i dont have all the details yet, what drive and firmware do you have?
Hitachi, Garyopa 2.3 stealth.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: loco502 on May 19, 2007, 02:55:00 PM
-
its a mod ban, time to find a way to change the console's id
-
Title: Help for XYZ Live codes - See if you are banned
Post by: princediabloxp on June 10, 2007, 12:02:00 AM
-
W:0000-000B
X:0000-F001
Y:20A8-4840
Z:8015-1007
what means this code??? ban or not ban???
This post has been edited by princediabloxp: Jun 10 2007, 07:04 AM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sheriff2006 on July 10, 2007, 08:02:00 AM
-
W:0000-000B
X:0000-F001
Y:20A8-4840
Z:8015-1007
what means this code??? ban or not ban???
Not banned. 1007 means "need to update dashboard"
Sheriff
-
Title: Help for XYZ Live codes - See if you are banned
Post by: kipsate on August 17, 2007, 04:38:00 AM
-
Hi i have a modded xbox360 for over a half year now.
When microsoft started to ban 360s i didn't connect to live anymore so i assumed i didn't got banned.
Now i flashed my 360 again with the newest firmware but when i try to connect to live it keeps failing.
my xyz codes are:
x:0000-f001
y:00A8-6820
z:8015-190D
I read some posts and i think i'm banned but i didn't connect to live for a long time however i did update my xbox with the spring update. Am i banned?
thanks a lot for help
-MIchael
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Toxis on August 27, 2007, 08:47:00 AM
-
um.. sorry, I'm new here.. but maybe someone can say, what my error codes mean
x: 0400 - f001
y: 0c88 - 1ceo
z: 0000 - 0000
is my provider playing tricks on me, or am I banned for being a nasty pirate (Aye matey! jarrr)?
thanks in advance
edit: I haven't done any updates lately... so no spring update I think...
This post has been edited by Toxis: Aug 27 2007, 03:48 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: KnobHead on September 04, 2007, 08:47:00 PM
-
Hi There,
Culd you help as I have searched all over the net but no one has the same XYZ Codes I can't connect to live but I don't get the message that I have been booted also in my network connections the xbxlive is wat fails. Im pretty sure I have been booted but before I change the firmware and buy I new 1 for online purpose I want to get a second opinion.
Codes
W: 0000-000B
X: 0000-F0009
Y: 30A8-4840
Z: 0000-0000
Also I have the iXtreme v1.2 Rev3.
Cheers
-
Title: Help for XYZ Live codes - See if you are banned
Post by: angrykid on September 29, 2007, 08:39:00 PM
-
Hi i have a modded xbox360 for over a half year now.
When microsoft started to ban 360s i didn't connect to live anymore so i assumed i didn't got banned.
Now i flashed my 360 again with the newest firmware but when i try to connect to live it keeps failing.
my xyz codes are:
x:0000-f001
y:00A8-6820
z:8015-190D
I read some posts and i think i'm banned but i didn't connect to live for a long time however i did update my xbox with the spring update. Am i banned?
thanks a lot for help
-MIchael
I get those same error codes exactly under xbox live section of the networking tests...
I would love to know what they mean also (if I'm totally screwed or not)
I mean, if I'm banned, big deal... I'll sell the console... haha
-
Title: Help for XYZ Live codes - See if you are banned
Post by: salasarjay on October 11, 2007, 04:15:00 PM
-
hi guys, i have iextreme 1.2 i believe. i was playin my 360 and nhl 08(iwas logged-in in XBL silver) then tried to update rosters and it said i need an xbox live gold to get it.. then i played my demos. then went out for a bit,, then wen i came back to play again it wont ley me connect to XBL then when i tested the XBL connection it failed "MTU" and showed me these code..
w:0000-000B
x:0000-F001
y:0000-0000
z:0000-0000
am i banned? what should i do?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: jacktheman on October 30, 2007, 05:14:00 AM
-
Hi guys, I'm getting this connection error code:
W: 0000-000B
X: 0000-F001
Y: 0C88-1C40
Z: 0000-0000
What does it mean? Thanks in advance.
Jack
EDIT: Nevermind, Xbox Live was down.
This post has been edited by jacktheman: Oct 30 2007, 12:16 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: R3FuG33 on December 04, 2007, 05:36:00 PM
-
Am I banned? To be Banned?
W: 0000 - 000B
X: 0000 - F001
Y: 000A8 - 6840
Z: 8015 - 190D
Thanks for the help guys!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: jimbo james on December 08, 2007, 04:55:00 PM
-
I've got a replacement RRoD 360 here, just tried to connect to Live
Updated, now I can't sign in to Live. Any know what these codes mean?
W 0000-000B
X 0600-F001 (or 0200-F001 depending on test)
Y 2048-4840
Z 0000-0000
Thanks
-
Title: Help for XYZ Live codes - See if you are banned
Post by: wincent on December 09, 2007, 10:38:00 AM
-
hi, i have new main board and dvd-rom in my x360, because was in servis. (3 red led error). i cant connect to xbox live now. can you help me? thx
report:
W: 0000 - 000B
X: 0000 - 002D
Y: 002C - 0380
Z: 0000 - 0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: irishdude199 on March 09, 2008, 11:54:00 PM
-
I need help. I have a xbox 1 with a 250g hard drive and duo x3 mod chip. i play on xbox live with the chip off and i got banned. modded a friends xbox, took his eeprom and flashed it to my xbox and it worked like a charm. 5 months later sign on and i'm banned again. modded a friends xbox, took his eeprom and flashed it to my xbox and got a configuration error code. ive tried messing around with the eeprom alot and i still have my old eeprom, my friends old eeprom, and my other friends virgin eeprom but i cant figure out why i cant get on live. any help would be greatly greatly apeciated.
my error codes are
1.00.5971.01
W:0000-000B
X:0000-F001
Y:00C2-01C4
Z:AFFF-0018
From what i read my eeprom is jacked up but what i don't know is what to do now.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: irishdude199 on March 10, 2008, 08:51:00 PM
-
I just flashed my xbox with the virgin eeprom again without adding or taking away anything and got the same problem but a different code.
W:0000-000B
X:0000-F001
Y:00C2-0042
Z:0000-0000
Plz help!!!! (IMG:style_emoticons/default/huh.gif)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: irishdude199 on March 11, 2008, 11:05:00 AM
-
I tried the enigmah fix last nite on the new eeprom and it came right up on xbox live! thanx everyone.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Timmymna on May 31, 2003, 12:59:00 PM
-
Can anyone help because I've seen this code a few times yet haven't seen any replys to it or missed them
x 0001 - 8005
y 00a8 - 4800
z 0000 - 0000
I have xbox 1.0 I installed a new hd yesterday and decided today to see if I could get Live working.
When I try to play the MotoGP demo I go to sign in, press A on my GamerTag and it comes up with "Your Xbox console cannot to Xbox Live" then gives me the options "Troubleshoot" and "Sign out" When I goto Troubleshoot, all four things come up green, I had my mod chip switched off while it updated and while trying to play. I tried replacing the EEPROM with another from a friend that has never been used on Live before and I still get the same problem.
Can anyone help or tell me what I'm doing wrong please.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sammeh122 on April 17, 2008, 06:31:00 PM
-
ok hey everyone...i have some codes that i havent seen before... on the test everything passes except the xbox live part, and im just wondering what the codes mean.
W 0000-000B
X 0001-8005
Y 0002-0180
Z AFFF-0016
Appreciate the help
-
Title: Help for XYZ Live codes - See if you are banned
Post by: exeter56 on April 20, 2008, 09:38:00 PM
-
Hi there, I'm from the Xbox Live Technical Support Team.
If you failed the Xbox Live test and got a Z code 8015-190D, then it means your console is automatically banned on Xbox Live and that is irreversible. No questions asked.
Z - 0000-0000 is usually just a connection issue. You should try connecting the console directly to a modem or try it at another location (like at a friend's house and more preferably the ISP should be different from what you are using) and check if that would work.
As for the Z code AFFF-0016, we've been getting a lot of calls like these over the past 2-3 weeks now. This issue is currently being investigated. If you are experiencing this issue and you are using a console which was sent back to you from repair (refurbished consoles), try the usual steps like powercycling your console and networking devices; or try a wired, direct connection with your modem (NOT routers and gateways - if you have these and cannot do a direct modem connection, open the ff. ports in your router or gateway: UDP 88, UDP 3074, TCP 3074 and also try enabling UPnP), or try connecting the affected console at a different place and location. If you are still getting the Z: AFFF-0016 status code, please call tech support and when you do, make sure you have the ff. information ready:
- the replacement console's serial number (accessible at settings-console settings-system info)
- the replacement console's console ID (same location)
- service request number/reference number of the console repair that was given to you by the hardware department back then to track the status of your repair (or if you don't have this anymore, at least kindly confirm that you indeed had the console repaired or just provide the serial number for us to track it down).
If all of these requirements are met, the issue would then be escalated to the upper management. You would most likely be asked for callback details so that a supervisor would be able to contact you as for what resolution would be reached regarding this issue.
Good luck!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: viperakos on August 06, 2008, 06:20:00 AM
-
W: 0000-000B
X: 0000-F001
Y: 008A-0FC0
Z: AFFF-0018
Can anyone to help me with this problem codes?How to fix this problem because i search it and i didn't find the solution.(Sorry for my english i don't speak very well the english language.)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: pcw on August 11, 2008, 01:51:00 PM
-
W: 0000-000B
X: 0000-F001
Y: 00C2-03C0
Z: 0000-0000
I've just had my 360 in for repair for 3RROD. My 360 was modded and I didn't even bother flashing it back to factory before sending it in (since the 360 sticker was lost anyway). But MS didn't seem to care that it was modded and replaced the whole thing with a new motherboard and new dvd drive (Benq). It runs more quietly now than before
Anyhow, before I was banned from Live. It said that during the network test. But now when I'm doing the network test it says "Technical Configuration Error. Please contact xbox support.". So I did that but they couldn't figure out what was wrong and wanted me to send the 360 in for service. I rather not do that since I've gone through the hassle of flashing the Benq drive just recently. And just have it sent in for the technicians to figure out that it is banned. What is strange though is that the xbox support didn't mention anything that it was banned or anything even though I gave them my serialnumber and the error codes.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: chrcol on September 29, 2008, 07:41:00 AM
-
hi guys, i have iextreme 1.2 i believe. i was playin my 360 and nhl 08(iwas logged-in in XBL silver) then tried to update rosters and it said i need an xbox live gold to get it.. then i played my demos. then went out for a bit,, then wen i came back to play again it wont ley me connect to XBL then when i tested the XBL connection it failed "MTU" and showed me these code..
w:0000-000B
x:0000-F001
y:0000-0000
z:0000-0000
am i banned? what should i do?
Hi
I got the same message and code exactly.
my scenario.
new xbox360 2 weeks old.
no mod
no flashed drive
no hacks whatsoever if not clear at this point
xbox live worked last week, I discconected the xbox360 for when my parents visited as cable go across settee messy.
today connected backup and got error cannot connect to xbox live.
network test mtu fails with above codes.
I can confirm from pc mtu discovery works, mtu is configured as 1500 on router so it is defenitly not a router problem, same router worked last week as well. For good measure I forwarded ports but made no difference.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: jlett on September 30, 2008, 02:47:00 AM
-
Hi
I got the same message and code exactly.
my scenario.
new xbox360 2 weeks old.
no mod
no flashed drive
no hacks whatsoever if not clear at this point
xbox live worked last week, I discconected the xbox360 for when my parents visited as cable go across settee messy.
today connected backup and got error cannot connect to xbox live.
network test mtu fails with above codes.
I can confirm from pc mtu discovery works, mtu is configured as 1500 on router so it is defenitly not a router problem, same router worked last week as well. For good measure I forwarded ports but made no difference.
Same thing just happend to me for the first time
I also got the exact same code as you, I have tried reseting everything and refreshing my router and everything is perfect.
I have been playing on xbox live everyday for the last 8 months and tonight for some reason it wont let me sign in to xbox live. I'm 100% sure nothing has changed in the last 20 hours so what gives. If it's a down time they would have told us.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Xbox-Warrior on October 03, 2008, 06:57:00 PM
-
I also had this problem but remember people Xbox Live will be down this Monday all day they are preparing for the fall update to come out later on. So it just might be an Xbox Live issue.
What I did was just do the auto config Network part it will say MTU failed then press B to get out and then I turned off my Xbox and back on a few times and it worked for me then.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: TB_88 on June 05, 2003, 11:10:00 AM
-
I hate Xbox media player... (I love it too)
When u wnna go back to the dash it goes to xboxdash.xbe... And evoxx "Reset In game" does not work in it...
But I'm not banned have launched the dash with mod like 10 times... The dash can't connect to live or???
-
Title: Help for XYZ Live codes - See if you are banned
Post by: JJSENS on October 31, 2008, 03:50:00 PM
-
it fails on IP address and im lost now...
this is the code for ya
W: 0000 - 000B
X: 4000 - 1001
Y: 0000 - 0000
Z: 0000 - 0000
Any help here would be hot
cheers
twagz
I have this exact same problem. By exact, I mean the code is exactly the same. Any help would be appreciated.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: CarnageMC on November 01, 2008, 07:00:00 PM
-
for everyone with the error codes:
W: 0000 - 000B
X: 0000 - F001
Y: 0000 - 0000
Z: 0000 - 0000
i had the exact same problem but was able to fix it by changing the NAT setting on my router. so far i haven't gotten the error code again.
This post has been edited by CarnageMC: Nov 2 2008, 02:01 AM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Xiaotjuh on December 08, 2008, 03:50:00 PM
-
I've got error codes
W: 0000-000B
X: 0000-F001
Y: 20A8-48E0
Z: 0000-0000
ID: FFFF-FFFF
Does anyone know what this means? my NAT ports are just open and xbox live works, but soooo slow and my connection just broke when I played Gears of War 2....
-
Title: Help for XYZ Live codes - See if you are banned
Post by: BLazeD on June 13, 2003, 03:31:00 PM
-
I cant see now help button
Do you actually have to have an XBL A/C to do this?
I have the XBL Dash fully installed
-
Title: Help for XYZ Live codes - See if you are banned
Post by: BLazeD on June 14, 2003, 03:49:00 AM
-
Dont know if I am banned, XBL isnt here in New Zealand yet so I cant check.
I might have gone into the XBL screen with my mod on, cant remember
Under COnnect Status I can connect to Xbox Live
Can some analyse this for me?
Xbox v1.0 UK
PC BioXX
1.00.5225.01
W: 0000 - 000B
X: 0000 - 000D
Y: 00A8-4800
Z: 0000 - 0000
P: 20/22
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on June 14, 2003, 05:21:00 PM
-
not banned yet
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Xbox-Savage on June 16, 2003, 10:03:00 AM
-
mod chip on :
W: 0000-000B
X : 0000-F001
Y: 00A8-4860
Z: 0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Nathan561 on June 16, 2003, 12:02:00 PM
-
Hey Fuzzy, great thread:
Am i banned?
1.00.5335.01
W: 0000 - 0015
X: 0000 - F001
Y: 00A8 - 4860
Z: 0000 - 0000
Thanks.. i hope I'm not
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Timmymna on June 17, 2003, 09:25:00 AM
-
x 0001 - 8005
y 00a8 - 4800
z 0000 - 0000
Banned?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: nexgenhalo on June 18, 2003, 06:46:00 AM
-
one question. what about a modded xbox that is not banned?
is it the same?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: maxgeek on June 18, 2003, 09:26:00 AM
-
x 0000 - F001
y 00A8 - 4860
z 0000 - 0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Hijirioni on March 23, 2010, 09:33:00 PM
-
I've got one similar.
W: 0000-0021
X: 0000-F001
Y: 20A8-4840
Z: 0000-0000
ID: FFFF-FFFF
I can go online, I've been able to play Left 4 Dead in a multiplayer game. I think my NAT settings are open (I configured them in my routers settings and turned it's firewall off). The XBOX Live test just says I'm connected, it doesn't display NAT or any errors. But if I press Y to check status I get this error code. I can download demos form the store too. But when I try to use Party, Private Chat, or try to play a game with a specific friend we always get errors. I don't know if the issue is on my end or hers as my xbox is pretty new. I've never had issues with my other systems though. Unfortunately I don't have any other friends available to test with.
I'm connected wirelessly and I haven't tested wired or direct connection.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Rossi NL on June 18, 2003, 03:31:00 PM
-
Modded Xbox, Automatic settings, banned.
From The Netherlands, ADSL (768 kb). Started up with the mod off, got these codes:
W: 0000-0015
X: 0000-F001
Y: 00A8-6820
Z: 8015-190D
I have no idea how to get unbanned again. I saw some messages about Eeprom etc. but I have no clue where to get this or how to use it... Can't I just hard-reset the box or something, like resetting the bios just like on a PC???
-
Title: Help for XYZ Live codes - See if you are banned
Post by: daveofstrength on August 25, 2010, 11:25:00 PM
-
I am also getting a similar message
I own the modern warfare 2 xbox 360 elite
I am using a wired connection.
My xbox live seems to be completely operational and fine, marketplace, games and all
However when i go to test my live connection and press "y" for status i get the following :
Error Status Report
W: 0000 - 000B
X: 0000 - F001
Y: 20A8 - 4840
Z: 0000 - 0000
ID: FFFF - FFFF
I have no clue what this means, i have googled to no end without answers, can someone please help me
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Psychopathic on September 12, 2010, 06:02:00 AM
-
W: 0000 - 000B
X: 0000 - F001
Y: 20AB - 4860
Z: 8007 - 000B
Can somebody tell me what my Z is referring to? I tried searching but haven't seen that code...
This post has been edited by Psychopathic: Sep 12 2010, 01:03 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: lordvader129 on September 16, 2010, 03:57:00 AM
-
W: 0000 - 000B
X: 0000 - F001
Y: 20AB - 4860
Z: 8007 - 000B
Can somebody tell me what my Z is referring to? I tried searching but haven't seen that code...
probably has to do with XBL being shut down for xbox1
-
Title: Help for XYZ Live codes - See if you are banned
Post by: linnx88 on October 26, 2010, 09:13:00 AM
-
How about this:
W: 0000-000B
X: 0000-F001
Y: 008A-0FC0
Z: AFFF-0018
I got this error yesterday and was worried that I might've gotten banned, but all is good.
What I did to fix this was:
1) Go to the xbox live test screen and go into network management.
2) I have a wireless adapter and so I simply selected my connection and typed in the wrong password for my wireless WPA2 connection to disconnect the xbox from the net.
3) Retyped my password and voila, it reconnected to the net and then to Xbox Live with no issues or errors.
(You can probably do the same with a wired connection, I would try changing a few numbers in the DNS or IP setting on the 360, in order for it to disconnect from your network, and then let it autodetect the settings again)
Woohoo! (IMG:style_emoticons/default/pop.gif) (IMG:style_emoticons/default/jester.gif) (IMG:style_emoticons/default/beerchug.gif) (IMG:style_emoticons/default/flamethrower.gif)
This post has been edited by linnx88: Oct 26 2010, 04:15 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: rig8800 on December 15, 2010, 09:03:00 PM
-
CONFUSED!!!!!!!!!!!
W: 0000 - 0021
X: 4000 - 1001
Y: 0000 - 0000
Z: 0000 - 0000
i dont know what to do!!!!!!!!!!!!!!!!!! i need help!!!!!!!!!!!!!!
IT wont let me connect!!!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: lordvader129 on December 16, 2010, 11:02:00 AM
-
CONFUSED!!!!!!!!!!!
W: 0000 - 0021
X: 4000 - 1001
Y: 0000 - 0000
Z: 0000 - 0000
i dont know what to do!!!!!!!!!!!!!!!!!! i need help!!!!!!!!!!!!!!
IT wont let me connect!!!
probably has to do with XBL being shut down for xbox1
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sp1kez on January 16, 2011, 07:32:00 PM
-
I cant connect this is my code, help is appreciated
W: 0000 - 000B
X: 0001 - 8005
Y: 30A8 - 4800
Z: 0000 - 0000
ID: FFFF - FFFF
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Man With A Bag on January 17, 2011, 04:13:00 AM
-
I cant connect this is my code, help is appreciated
W: 0000 - 000B
X: 0001 - 8005
Y: 30A8 - 4800
Z: 0000 - 0000
ID: FFFF - FFFF
Like the man said above; Xbox Live for the original Xbox is no more! It's gone!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sp1kez on January 17, 2011, 09:51:00 AM
-
Like the man said above; Xbox Live for the original Xbox is no more! It's gone!
oops I meant to put this on xbox 360
-
Title: Help for XYZ Live codes - See if you are banned
Post by: lordvader129 on January 18, 2011, 08:53:00 AM
-
http://forums.xbox-scene.com/index.php?showforum=146
-
Title: Help for XYZ Live codes - See if you are banned
Post by: k1701 on January 29, 2011, 06:11:00 PM
-
hello all,
Been trying to connect to Xbox Live,I ran a connection test, it read I was connected to XBL. But I got this error message:
W: 0000-0021
X: 0000-F001
Y: 20A8-4840
Z: 0000-0000
then i got:
W: 0000-0021
X: 0000-F001
Y:20A8-4860
Z:8007-2746
what does this mean?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MaNoLo75 on June 22, 2003, 10:10:00 PM
-
I can't connect to xboxlive, here are my codes :
w:0000-0013
x:0000-000D
y:00C2-0002
z:0000-0000
I'm located in France. Am I banned ?
My xbox is modded with a Matrix and I just reinstalled the original hdd to try the xboxlive.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on June 25, 2003, 04:31:00 PM
-
Ive seen this code before, im still not sure what it means but it looks alot like banned from past experience. Switch up your eeprom, come back, and tell me if it worked. (More c codes please, they remain a mystery Please if you have any info as to what the c code might be [y:00C2 0002] tell me. Especially if you got reconnected with out switching eeproms)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: lili on July 02, 2003, 11:11:00 PM
-
When I modifiled eeprom with maybe invalied OnlineKey and MAC address,
1st Y code shows 00C2.
I'm thinking may appear when checks on XBL reject them.
I switched to my original eeprom, then show below.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on July 07, 2003, 05:58:00 AM
-
hmm, cool
-
Title: Help for XYZ Live codes - See if you are banned
Post by: lili on July 08, 2003, 06:32:00 AM
-
After last post, I tried some.
I wrote disk.bin for my gamer's tag.
then 1st Y code shows 00A8 when I wrote invalid code in EEPROM.
This means maybe my post was wrong.
If somebody can try, please post.
// I wanna get a unbanned eeprom.... If you can send it to me, PM plz.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MadEx on July 08, 2003, 10:11:00 AM
-
Apparently I'm banned...
0000 - F001
00A8 - 6840
8015 - 190D
If anyone has a unbanned EPPROM their not using, please send it this way.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on July 11, 2003, 05:45:00 PM
-
dude, since you already have a banned eeprom do me a favor. Screw up your eeprom in config magic and tell me what your xyz codes are please.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on July 11, 2003, 05:46:00 PM
-
no
-
Title: Help for XYZ Live codes - See if you are banned
Post by: * illusion * on July 29, 2003, 03:21:00 PM
-
1.00.5335.01
W: 0000-000B
X: 0001-8005
Y: 00A8-6800
Z: 8015-190D
Why am I the only one with a W?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ElementXP on August 03, 2003, 10:03:00 PM
-
okay i live in surrey bc canada, and i left for 2 weeks with my xbox, came back and was banned from xbox live. i don't know how or when but i am very careful when i used my xbox with the matrix modchip in mode 3. i have the newest x2 bios and evox dash, and always reset it to disabled mode before going on, how could this have happened. i also use my original hd.
this is what my screen gives me
1.00.5335.01
w: 0000 - 0015
x: 0000 - F001
y:00A8 - 6820
z: 8015 - 190D
how can i get my live to work again, i called there hotline and he said i wasn't banned and he believed me that i hadn't modded my xbox
oh and the error i get is everything is connecting but the last one, says xbox cannot connect to xbox live becasue he it "may" have software or hardware modifications or some shit like that.
i also think i would have a backup of the eeprom from my old harddrive if that is where its from and not the xbox mainboard or something like that.
can some please tell me if im banned or not and how to get this bitch to work, im pretty poor so i can't get another xbox and aswell i can't send my xbox to them for repairs as ITS IN A F**KING COMPUTER TOWER!!!!
thx
-
Title: Help for XYZ Live codes - See if you are banned
Post by: SLuSHIE on August 04, 2003, 08:59:00 AM
-
hey guys....well today i loaded up wolfenstein, and clicked on xbox live with mod on by accident...while it was authenticating, i shut my xbox off as i just noticed it. now i cannot play unreal, ghost recon, wolf, or whacked demo online. but i can still play nfl 2k3 fine online. am i banned or whats going on? my hex values or whatever you call it are:
1.00.5335.01
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 4860
Z: 0000 - 0000
please someone help....is anyone selling an eeprom and can lead me threw how to replace it? damn, i would really appreciate it, and will never forget a favour. im also on irc, on efnet (#xbox, dvd, gamecube, ps2, etc) an op, and i can be trusted if doing business with you.
well the next day, i got the error = "cannot connect to live because might be modified etc" now, how do i find out my X,Y,Z values? i press Y and nothing happens.....and also, how do i obtain an unbanned eeprom from another xbox? (i might be able to get one not for sure tho depends how its done) please someone help. i appreciate all of your help, and your time. thank you. take care
SLuSHIE
-
Title: Help for XYZ Live codes - See if you are banned
Post by: SLuSHIE on August 04, 2003, 09:03:00 AM
-
fuzzy...i live in canada, i think i have a version 1.0 xbox, have X-ecuter 2.2 pro with switch and evox installed, (when mod is on it boots to evox dash, when off boots to ms dash)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: AkumAPRIME on August 06, 2003, 01:14:00 PM
-
I read through this and most of the other pinned thread you wrote fuzzy. I dont know if you need em, but here are my numbers.
X:8000-0011
Y:0000-0000
Z:0000-0000
I thought for sure I was banned, but after reading your thread and seeing no six in my numbers.... Maybe I'm NOT banned!!! woo hoo... Ill have to check. Ill get a live game tonight and test, re post
Not sure if you still check this thread. Hope you do!
ehb
-
Title: Help for XYZ Live codes - See if you are banned
Post by: SLuSHIE on August 10, 2003, 09:59:00 PM
-
nah your not banned
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bigben04 on August 11, 2003, 02:54:00 AM
-
EDIT: I worked through the entire topic and found out that the 6 in the right part of the y-code means that I'm definitely banned, so never mind. If I can do anything to help to 'crack the codes' just let me know.
Hi,
I hope you can help me out here, any help is appreciated. I was pretty sure that I never went online with my modchip on (I use the PC-Bioxx chip), but every game gives me the message "can't connect ... blah ... your software or hardware may have been modified" so I probably made a mistake once.
If I screw up the DNS settings so it can't connect I get the following codes:
w 0000-000b
x 0001-0005
y 0000-0000
z 0000-0000
When I restore them and press Y just before the screen with the error message, I get the following codes:
w 0000-000b
x 0000-000d
y 00a8-6800
z 8015-190d
This probably means I'm banned but I want to be sure about it.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: SLuSHIE on August 11, 2003, 07:57:00 AM
-
yup u r banned
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Soulja545 on August 11, 2003, 04:26:00 PM
-
hey guys i got xbox live a couple days ago and i got a switch to go on xbox live, when i try to connect thorugh my router i get the codes that go like this:, i also get a way, this is the first time for me.. the code is:
W: 0000-000B
X:0000-F001
Y:00C2-0022
Z: 0000-0000
my UL and DL are also O kb, any help would be greatly appreciated, am i banned? im 100% i didnt use mod while connecting, i wasnt even connected to the service yet! any help on what these codes mean? thanks..
-
Title: Help for XYZ Live codes - See if you are banned
Post by: hansiu on August 14, 2003, 05:49:00 AM
-
I got banned (forgot to turn of the chip) and then i got myself a new eeprom. When i try to log on to live with the new eeprom i get the xbox live not available try changing the router settings or additional steps neede by ISP bla, bla, bla. Anyway, here is my xyz code. What do you make of this?
X: 0000 - 000B
Y: 00C2 - 03E0
Z: 0000 - 0000
When i use my old eeprom the xbox connects with live, but i get the hardware mod error, the also indicates banned.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sck on August 14, 2003, 10:34:00 AM
-
If your xbox is banned, will you get a specific message regarding that? I just tried the live option today, just to check if it was working, and now I can't connect (it connected fine all previous times). I had the same settings as someone else mentioned, and all they did was reflash their current eeprom w/ the same one and it fixed the problem. I did the same, but didn't help. My error is xbox live not found w/ network settings errors. Using a Dlink 614+ router.
My codes are as follows:
X: 0000-F001
Y: 0088-1C60
Z: 0000-0000
Is this banned or not? Also, what's the proper way to reflash the original eeprom in configmagic? I unlocked the hd, hit update eeprom, then relocked the drive.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: sck on August 14, 2003, 11:15:00 AM
-
guess I forgot that they were updating live servers today:
At 12:01 a.m. PDT, we will perform routine server maintenance to keep the service running as smoothly as possible. Despite a lot of speculation in online forums and in the press, the upgrade will begin and end on August 14.
heh, guess i'll check back tomorrow
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bho76 on August 18, 2003, 09:13:00 AM
-
my xyz are
x- 0000-f001
y- 00c2-0062
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bho76 on August 18, 2003, 09:15:00 AM
-
oops...
again
x-0000-f001
y- 00c2-0062
z- 0000-0000
does this mean i am banned?? i can't connect at all...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Pr0ph3t on August 29, 2003, 12:57:00 PM
-
X: 8000 - 0011
Y: 0000 - 0000
Z: 0000 - 0000
Banned?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: fewl` on August 30, 2003, 04:08:00 PM
-
Yes your banned, I got the same thing like yours
Cheers mate!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Magiske on August 31, 2003, 05:30:00 AM
-
What about this one..
X: 0000 - f001
Y: 00c2 - 01e4 (seen that before)
Z: 8015 -1917
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fog Dogg on September 01, 2003, 03:12:00 PM
-
Heres my xyz...
X:0000 - F001
Y:00A8 - 4840
Z:0000 - 0000
I am unbaned, using the audio dashboard exploit.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: t0mmyr on September 07, 2003, 01:41:00 PM
-
help! i can't connect anymore and i just got midtown madness 3, i want to try that online bad.
i think i have an xecutor 2lite installed
my codes as followed:
1.00.492.0.1
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 1917
how can i revert the 6860 back to 4860? won't that fix it?, i also have a RAR of a second xbox i purchased for a friend using a new 10gb seagate HD (it was v1.3xbox), that xbox doesnt use xboxlive, can i just copy those HD contents over, or are these numbered stored somewhere on the hardware on my xbox...?? can we reflash the xbox if so?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bloodfist on September 09, 2003, 06:28:00 PM
-
unmodded box, auto settings
X: 0000-F001
Y: 00AB-4840
Z: 0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Dregan on September 10, 2003, 11:31:00 PM
-
Well i guess im only person here that has a X code starting with 0001, i play live all the time, but here are my codes, also i havea x2lite 2.2 chip installed and latest live dash that came out today
W: 0000-000B
X: 0001-8005
Y: 00A8-4800
Z: 0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Airwolf[UKR] on September 11, 2003, 06:49:00 AM
-
i got this numbers:
W: 0000-000B
X: 0000-F001
Y: 00C2-0022
Z: 0000-0000
are they any good???
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Airwolf[UKR] on September 11, 2003, 11:38:00 AM
-
hmmm, it seems that when u have an A8 in ur 1st Y and no 6 in 2nd that you are not banned... however peeps with C in their Y have the XBOX LIVE NOT FOUND Error. i have that same error... i had my chip on, and didnt get banned, cuz i didnt get a ban-notification.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Gamer on September 11, 2003, 02:56:00 PM
-
Sorry chaps, didn't want to read the full 19 pages to check if this info had already been posted. I know the first couple of posts go through this in some detail, but for those who didn't read all that either, this is from M$ website:
Questions and Answers
Q. OK, I understand that my connection to the Internet can have different speeds in each direction. How can I find out how fast my connection is?
A. Simple! Turn on your Xbox without a game disc in it. When you get to the main menu, select the Xbox Live option. Select the Network Setup entry, and then select the Connect option at the bottom. When the Xbox is done checking the connection (successful or not), press Y on your Xbox controller. At the bottom of the window that appears youll see a UL: entry and a DL: entry with a number following each. The UL is your upload speed, or the upstream pipe to the Internet. The DL is your download speed. Both numbers are in kilobits per second.
Q. What do the other numbers on the screen mean?
A. The first codes are just diagnostic codes the Xbox Live team uses. Skip those, and drop down to the L: entry.
The L: entry is latency, or the average lag your Xbox is seeing when connecting to Xbox Live. Bear in mind that the number you see here is measuring the speed of the connection from your Xbox to one of the Xbox datacenters on the West Coast of the U.S.A. If you're connecting from Europe, Japan, or elsewhere in the world, this number is likely to be pretty high. Dont worry, thoughyour game always knows where to find the closest game host or datacenter.
The P: entry is ping, a network term for a test that sends test packets to a location and sees how many get through. A high number (such as 20 of 20) is good; this means that your connection to Xbox Live is good. Dont worry if a few packets get lostthats common. (Remember how the freeway changes suddenly?)
One thing to note is that the latency and ping numbers refer only to your connection to Xbox Live. Your connection to other gamers Xbox consoles could be very different. Good numbers here dont necessarily guarantee a good game with other people, but they help. At least you know that your overall connection to the Internet is working, and that the Xbox Live data being sent to/from your Xbox is being sent reliably.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: psibob84 on September 11, 2003, 04:04:00 PM
-
Ok just updated to XBox live 2.0 and my codes are still the same
X2 pro upgraded 80 gig hd locked with evox x etc loaded onto f drive (eg virgin c and e drives)
xbox going through pc which goes through a router to the internet
X:0000-000D
Y:00A8-4800
Z:0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: The DareDevil on September 12, 2003, 08:28:00 PM
-
My banned xbox:
w: 0000 - 000B
x: 0000 - 000D
y: 00A8 - 6800
z: 8015 - 190D
When you're banned, MS will not renew your subscription, right?
Edit: I blame MotoGP2 for my bannage
-
Title: Help for XYZ Live codes - See if you are banned
Post by: curse_007 on September 13, 2003, 06:09:00 AM
-
w: 0000 - 000B
x: 0000 - 000D
y: 00A8 - 6800
z: 8015 - 190D
I was also banned...had my X2.2lite plus on and it auto connected....
oh well...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: -- on September 15, 2003, 08:47:00 AM
-
I was wondering if I can go on xbox live with this
w:0000-0000
x:8000-0011
y:0000-0000
z:0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: chevrix on September 15, 2003, 08:51:00 AM
-
I had just the same when I had the old dash.
Now I upgraded to live 2.0 my wxyz codes are all zero's.
So if I could connect, you probably also can.
Maybe because we do not have an account yet there are so much zero's in...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Gamer on September 15, 2003, 09:57:00 AM
-
Thats showing that you have not connected to XBLive
-
Title: Help for XYZ Live codes - See if you are banned
Post by: -- on September 15, 2003, 10:26:00 AM
-
ok I'll try then I'll post it again
-
Title: Help for XYZ Live codes - See if you are banned
Post by: -- on September 15, 2003, 12:09:00 PM
-
ok got the new 1
This post has been edited by -<Slayer>-: Sep 15 2003, 07:11 PM
-
Title: Help for XYZ Live codes - See if you are banned
Post by: -- on September 15, 2003, 12:10:00 PM
-
W:0000-0015
X:0000-F001
Y:00A8-4860
Z:0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Gamer on September 15, 2003, 12:20:00 PM
-
Yeah, that's better. 4860 means not banned, and auto settings were used to connect. All is good with that. Thats 100% normal
-
Title: Help for XYZ Live codes - See if you are banned
Post by: -- on September 15, 2003, 12:28:00 PM
-
thax alot for your help
-
Title: Help for XYZ Live codes - See if you are banned
Post by: shanafan on September 15, 2003, 12:55:00 PM
-
Merged with XYZ thread.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mrhahn on September 15, 2003, 02:07:00 PM
-
am i banned ??
x = 0000-f001
y = 00a8-6860
z = 8015-190d
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ThaLikz on September 16, 2003, 06:12:00 AM
-
Am i banned?
I did something very stupid i wanted to play ghost recon so when i was in the menu i needed to make an new account zo i pressed the button to make one suddently it went to the ms dash and there was an menu wich said somethin like this
you are about to subscirbe to xbox live
blablabla
zo you needed to press contineu i dindn't do it when i saw this i pressed imediatly my xbox off.
(by the way at the moment of this i had already xbox live 2.0 and auto connect on)
These are my codes
w:0000-000B
x: 0000-000D
y: 00A8-4800
z: 0000-0000
-
Title: Help for XYZ Live codes - See if you are banned
Post by: zipdoa on September 16, 2003, 03:19:00 PM
-
My xbox was banned while the modchip was off aswell... I guess they have some new software on live 2.0... im running an X-ecuter 2.2 Lite +...
my stuff looks as follows:
1.00.5659.01
W:0000 - 000B
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 190D
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Airwolf[UKR] on September 20, 2003, 06:43:00 AM
-
YYYYYYYESSSSSSSS!!! IM NOT BANNED!!!, i had some errors like xbox live not found, but they all gone now!!! yes yes yes!!! WOOOHOOOO!!!!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Spency234 on September 20, 2003, 08:35:00 AM
-
How about this:
W: 0000-000B
X: 0000-F001
Y: 008A-0FC0
Z: AFFF-0018
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Airwolf[UKR] on September 20, 2003, 10:34:00 AM
-
My xbox live problems are solved now... i had the modchip on the first time and didnt get booted, instead i got XBOX live NOT FOUND error. I had these codes back then:
X:0000-F001
Y:00C2-0022
Z:0000-0000
but after i turned off the modchip i had the following codes:
X:0000-F001
Y:00A8-4860
Z:0000-0000
The only thing i know is that C1/C2 or C3 in your Y code means that you have the xbox live not found error.
good luck to ya all!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: dummie on September 21, 2003, 02:51:00 AM
-
i have the same xbox not found problem am i banned?
X-0001-8005
Y-00C2-0380
Z-0000-0000
hope im not my chip is messed up and i have nothing eles to play that's real. except one.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: dummie on September 21, 2003, 02:52:00 AM
-
and how can i fix it?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: dummie on September 21, 2003, 04:23:00 AM
-
i dont even have my chip in soon as i did a bad flash i took it out and then tryed live.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Airwolf[UKR] on September 21, 2003, 04:31:00 AM
-
oh, you dont have a chip in ur xbox.... hmmm do you have any other things that are not original?? like new HD or anything?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Lost Dream on September 23, 2003, 03:39:00 PM
-
I went online tonight with my chipp switched off, but my eprom left on NTSC, these are my settings
X 0000 - F001
Y 00A8 - 4860
Z 0000 - 0000
Am I banned. If not, does this mean you can play us discs on a pal machine withn the chip switched off?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mpage on September 23, 2003, 05:25:00 PM
-
ok... heres a puzzle for everyone out there. After flashing a new, unbanned eeprom, with everything successful in config magic, I get this set of codes when trying to connect to XBLive.
x: 0000-F001
y: 00C2-0062
z: 0000-0000
The error in network troubleshooter is that XBlive could not be found. The S/N at the top of the troubleshooter is blank, although there is one displayed in config magic.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ocat on October 04, 2003, 04:44:00 AM
-
Excellent question. I have a PAL box and a heap of NTSC games, but no switch on my chip (soon to install one). That would be great if that worked!
As for you been banned, by the the looks of your Y00A8 - 4860, then no, you're not banned.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 15, 2003, 06:08:00 PM
-
Now that im back im going to restart project decode so we can know just as much as MS Instead of asking them, ill gather some developers and well work out a program. Remember, I STILL NEED WXYZ CODES AND INFO. Specifically location, banned status, connection speed, location in us if applicable, and other things you find important. It cant be done without the people!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mrRobinson on October 15, 2003, 07:19:00 PM
-
i'll post my XYZ tomorrow but can't we social engineer these meanings out of Micr0soft somehow? I'll give it a shot tomorrow for the hell of it but this really shouldn't be too closely a guarded secret. I mean it'll help us understand a bit more but not enable us to hack or mod any better or further. Am I understanding this correctly?
EDIT: oh you said, "Now that im back..." but where did you go?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: yrga on October 16, 2003, 02:22:00 PM
-
I've been browsing through all your posts since the beginning, and only thing I can think off to help out guys banned (other than getting a new eeprom), is to buy a new Xbox just for live once the price drops to $99, likely to happen after Christmas season. If the "Holiday Bundle" remains after the season, you will get Live along with the Xbox.. souds great to me and avoids a lot of headaches!
Cheers!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 16, 2003, 02:57:00 PM
-
If you really read this whole thread youd know it has nothing to do with getting unbanned
-
Title: Help for XYZ Live codes - See if you are banned
Post by: shanafan on October 17, 2003, 12:35:00 PM
-
MotoGP 2 is a Live Aware game. Check the pinned topic about Live Aware games.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mrRobinson on October 17, 2003, 12:35:00 PM
-
there is hope... all they need is to get a new eeprom... not a whole new xbox.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MasterMind on October 17, 2003, 07:11:00 PM
-
100.5659.03... South FLA USA
X 0600-F001
Y 00A8-6860
Z 8015-190D
W 0000-000B
BANNED !!!!!!!!!!
Damn auto login got me..
This is taken with the line on plugged in but mod not enabled. Its running through a wireless router A SMC 2408 80211 G router. Firewall is on but ports are open I still inspect packets on way out and in. I changed the XD serial number and rom ser # and still no unban ?? .. Maby it will help ya. I called ms explained that I got box refurb from gamespo# and was fine up tell they installed the live 2 upgrade. then it gave me MSG.. I s/w manager there and was told that in 1-2 weeks I should be able to get on-line and play ?? WTF is this about?? The CSR I s/w said that there have been a few calls in the last cpl of days where there is no mod chip and they were banned ? Perhaps there is a flaw in the system after all. Ill be happy to post if I was actually unbanned or not.. L8trz
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 19, 2003, 04:40:00 PM
-
Thanks man (i need some more W codes because currently i have no idea what they do.)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 20, 2003, 05:27:00 PM
-
Anybody have some different w codes?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ...ranma on October 21, 2003, 02:13:00 PM
-
1.00.5659.03 (Ohio USA)
W:0000-000B
X:0000-000D
Y:00A8-4800
Z:0000-0000
NOT BANNED.
Incidently, I have a copy of the EEPROM from my old xbox with an X1 in it that I sold to a friend that'll never be going on Live (I removed the live option from his MS dash and replaced it with a link back to EVOX)... So I've got an extra eeprom.bin file in case I get FSCKed.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MasterMind on October 21, 2003, 05:45:00 PM
-
ok cant you just change the serial number in the eprom and on the HD with config magic and log in. They ban by the ser # dont they ? if thats the case goto your local store copy the ser# and wala.. ?? hell I am probably wrong and just wishfull thinking. by the way anyone want to part with a non baned prom
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 21, 2003, 06:03:00 PM
-
Random serial numbers dont work and the serial at the store is tightly sealed in the package in a cd case under that scratch off stuff.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ...ranma on October 22, 2003, 04:01:00 AM
-
I think he meant the xbox serial # not the live #.
Don't think changing your live # would work anyway... As the live # is tagged (?) to your live account and as far as we know, MS doesn't ban your account, just your xbox.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mrRobinson on October 22, 2003, 07:29:00 AM
-
yes. they only ban your eeprom right now, not your live account.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 22, 2003, 11:07:00 AM
-
I wonder why they never thought to do that...maybe someone should actually read the terms liscense agreement thing.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mrRobinson on October 22, 2003, 01:08:00 PM
-
i'm sure they thought.... but they still want your money just not from a modded xbox. its all about them protecting their service. they don't need to destroy the mod scene. all they need to do is ensure that if you want to play a live enabled game you need to not be using a modded xbox. which they do for all intents and purposes.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: ldjones48 on October 23, 2003, 12:44:00 AM
-
Ok looks like i wil have to buy a new XBOX
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 23, 2003, 10:39:00 AM
-
Just find a not banned eeprom and flash it
as for the not banning accounts i just realized, if you buy a prebanned box they dont what your account to get banned.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cretin on October 23, 2003, 06:59:00 PM
-
modded xbox
banned
X:0000-F001
Y:00A8-6860
Z:8015-190D
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 24, 2003, 07:40:00 AM
-
w code? (and location)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: yrga on October 24, 2003, 12:27:00 PM
-
And I ask again.... how likely is for ppl to get a new eeprom file?
It sounds fair to me that eventually must banned ppl will have to buy a new Xbox just for Live (wait for price drops after Christmas ).
-
Title: Help for XYZ Live codes - See if you are banned
Post by: mrRobinson on October 25, 2003, 11:50:00 AM
-
getting a new eeprom is not too difficult. I'm not sure why you think it is. if people think its really hard to get one then they didn't put much effort behind it and don't know how to search.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 26, 2003, 08:21:00 AM
-
Dont go around asking though, people dont like it, wait for the opportunity
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 29, 2003, 03:23:00 PM
-
Well your not banned yet. You might become banned though. If those are your codes, it appears everything should be going smoothly (recieving all packets well and not banned)
Does anyone not have a w code thats just b?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on October 30, 2003, 10:33:00 AM
-
Sounds more like a port problem to me or something like that.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: bem69 on November 01, 2003, 04:41:00 AM
-
You were right Fuzzy. My problem is real weird. Xbox Live goes on and off for me now. The only fix for me is to switch off my router and turn it back on again. That wouldn't be a problem as much, but I have to change the config for XBMP everytime this happens (DHCP IP change), which is a pain in the ass. Used to work flawlessly too. Even put the xbox ip in the DMZ field.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 01, 2003, 10:46:00 AM
-
I think he means he forgot it was a backup and tried going on live with it.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 01, 2003, 10:48:00 AM
-
*sorry for double post needed another named quote*
I feel like i know alot about networks and to me all that means is your xbox isnt being dealt an ip right away so when you cycle your router its picking up the xbox. What brand router is it? You might have to set it to automatically pick up new "clients"
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 01, 2003, 12:21:00 PM
-
tres weirdo man (strongbad accent)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 01, 2003, 05:42:00 PM
-
Thats one of those strange codes i cant figure out because a bunch of people have them but we cant be sure if they are banned or if its a network problem. How do you know your banned? Does it stop at Ip, Dns, the other one, or Connection to xbox live?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 01, 2003, 06:00:00 PM
-
oh. well try getting around that (fix your router settings) then report back (its very important you can finally get the info known!)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: uzi rider on November 02, 2003, 10:21:00 AM
-
I thought i read that if you use gamertag from live as profile for Crimson Skies, even playing single player; game will access online for messages from friends list. Ive been very careful not to use harddrive backup when going online. My box was connected to router while playing, and I am sure I didnt log in. But stranger things have happened. About 2 months ago I tried to download content off live with the chip active, but realized right when it connected and I pulled the plug. But I have been using the account for months and just recently got banned. MS reacted very slowly if that was the event that banned my box.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Edge_3 on November 06, 2003, 07:36:00 AM
-
Helpz... peepz...
W 0000 - 000B
X 0000 - 000D
Y 008C - 0000
Z 0000 - 274C
I can't connect.... Been messing with the settings, and before it said XBox Live not found.
Banned? Shouldn't have thought so. I've done nothing to get me banned. Always been Uber careful.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Edge_3 on November 06, 2003, 07:38:00 AM
-
Got it to say Xbox live not found again.
W 0000 - 000B
X 0001 - 8005
Y 0088 - 1C00
Z 0000 - 0000
Any ideas?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 06, 2003, 11:29:00 AM
-
Extremely interesting! Good work! Would you be interested in helping if i do a quick prog to analyze your xyz codes? Im not a programmer im more of a hardware guy so i need some people who know what they're doing. If your a programmer or just interested in working with me on decoding some crap contact me via pm.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Edge_3 on November 06, 2003, 02:27:00 PM
-
Quick update. I rang them up, I'm not banned. The service was down, even though it said it wasnt on the web site. On live now.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: RideBurton164 on November 07, 2003, 06:35:00 PM
-
Ok heres the deal. I have a v1.0 xbox. I fried the original motherboard and purchased a new one, got it all setup again with a 20gb hdd. Busted up the daughter board a while ago so i only had ports 1 and 2 so i finally decided to try and fix it....busted up 1 and 2 also and was forced to buy another daughter board..oops. Anyway, I just bought xbox live and wanted to test it out so i installed it on my sisters unmodded xbox. Works great, love it. However, when i got mine back up and running today, i pop in the starter disc, update the dashboard, and UH OH NETWORK TROUBLESHOOTER..!! Everything checks out, except for unable to reach xbox live at the bottom Now sorry if i missed a post, and if i did please feel free to make fun of me, but somehow I seem to be banned from xbox live, when i've NEVER been on xbox live with my xbox to get banned!! Anyone have any ideas? I'm thinkin crappy eeprom? My xyz is as follows:
W: 0000-000B
X: 0000-F001
Y: 00C2-0022
Z: 0000-0000
or with mac address entered
W: 0000-000B
X: 0000-F021
Y: 00C2-0022
Z: 0000-0000
Thanks for any help guys...
I had wires still installed from an x2 lite that was removed...took those out didnt do anything(as i didnt think it would...)
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 07, 2003, 09:27:00 PM
-
I just get this feeling the c1/c2/c3 has something to do with certian things not matching up like the eeprom data. A lot of people who switch parts around and their eeprom get these codes.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: RideBurton164 on November 07, 2003, 09:33:00 PM
-
so you think new eeprom would fix the problem?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: RideBurton164 on November 08, 2003, 06:13:00 AM
-
processor doing overtime?? that sounds kinda ridiculous....i just bought a new unbanned eeprom, so we'll see how that works. your processor theory seems almost stupid as the processor is integrated into the motherboard...so its not like there would be a conflict between processor and motherboard. only thing that would be diff with a mb swap is dvd drive and hard drive.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: MikeHolliday on November 08, 2003, 10:34:00 AM
-
Damnit, i started Rainbow 6 with the modchip turned on just to test the game out and all of a sudden I see some xbox live menu saying "connecting" I immediately turned the xbox off.
I had been playing Crimson Skies without updating the dashboard (unless it did it without letting me know but nothing seems to have changed so i dont think it ever updated) and all of a sudden last night when i tried to play (three or four days after the rainbow 6 incident) Crimson Skies with mod chip off like i always do it goes to some menu and says i have modified hardware. I guess i'm banned?
W:0000-0008
X:0000-F001
Y:00A8-6860
Z:8015-1900
-
Title: Help for XYZ Live codes - See if you are banned
Post by: RideBurton164 on November 08, 2003, 07:47:00 PM
-
to finish off my problem from a few replys ago....i got new eeprom and it fixed it so I'm guessing 1 the eeprom on the motherboard i bought from the guy was banned, or some of the codes didnt match up, or they were just completely bogus and made up.
as far as your beta issue man...from what ive read, i understand it that beta users who used chips on live during beta, got banned as soon as the installed retail even if they didnt use the chip on retail...but thats just my understanding
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cutriss on November 10, 2003, 10:43:00 AM
-
Well, I've scanned through all the posts in this thread, and I'm busy processing the information down so I can make a definitive list of what each bitflag is.
For now, I can at least disclose the following details:
Having your Live account on an MC or the HD makes no difference.
Setting your connection to 10BaseT or 100BaseTX makes no difference. Your transmission flow settings (Half-duplex / Full-duplex) *will* adjust the W values. I don't know offhand if the Xbox hardware supports Gig-E, and the only place I have access to 1000BaseTX is on our Cisco routers at work, which are heavily monitored, and I don't have a Mac, so I can't check to see if Gigabit Ethernet gives a different value of W. If someone else could check this, that'd be good. Someone way back posted a W: value of 0013, and I don't know what generated that.
Playing around with my connection settings actually gave me a few new values of X:, and I didn't even touch the MAC/PPPoE/Wireless settings.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cutriss on November 10, 2003, 10:57:00 AM
-
Also, the 008C that Ranger 5 reported last week is a DNS issue, because you can get that code just by enabling manual DNS specification, and then entering in bogus values.
The error code doesn't distinguish the reason the DNS server was unreachable (eg - connection rejected/denied from machine). I tried setting it to the Xbox itself, my gateway (which wasn't serving DNS), another IP within the same subnet (where no machine existed), and an IP outside the subnet. All four returned the same error code.
So, Ranger 5 may be banned (he said as much), but his problem now is the network and nothing else.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 10, 2003, 02:31:00 PM
-
When i finally get a hex editor that didnt run out is liscense ill start searching!
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 14, 2003, 05:20:00 PM
-
It could change later on because the live system takes a bit to register everything. The codes are based on responses from the server. If your not recieving the trashed response, it wont say it.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: akula169 on November 17, 2003, 09:01:00 PM
-
Ok, so has anyone found out what the C2 code means?
Here's my problem - I've got two xboxes - one connects, one doesn't - same network - same config - DHCP on my router. Live 2.0 was installed on both - auto-connect was disabled right after I upgraded to 2.0.
The one that isn't working:
It wants to troubleshoot immediately. Upon troubleshooting, it gets an IP, resolves DNS and then immediately hits "Live not found" and pops up this message:
"Your Xbox console cannot communicate with Xbox Live because of technical configuration issues. Please call the Customer Care number listed in your Xbox Instruction Manual for more information."
Here's the XYZ
W: 0000-000B
X: 0000-F001
Y: 00C2-01E4
Z: AFFF-0018
Now, after reading all these posts, I figured something might be up with my EEPROM, since the video mode was changed when I was messing with XBMC. I used a copy of the original EEPROM (from evox backup) to re-do the EEPROM with ConfigMagic - unlocked drive, rewrote EEPROM, Loaded EEPROM, Locked drive. No difference. Still can't find Live.
I'm thinking I'll try swapping the EEPROMS between the two boxes to see if it makes a difference. But that will have to wait until I have more time tomorrow.
Just for kicks, here's the XYZ from the working box:
X: 0000-F001
Y: 00AB-4860
Z: 0000-0000
I'll report my findings on the EEPROM swap tomorrow.
** added info **
Oh - I guess I should mention that I've also recently upgraded my drive from a 120G to a 250G - noticed another post talking about this. However, it is locked - and only a partition 6 - no G drive. Just saw another post talking about this. This may be the root of the problem and caused it stop working, but I haven't tried Live in a couple months, so I don't know if it was working before the drive upgrade.
I'll also swap the drive back to the 120G and see if that does anything as well.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cutriss on November 18, 2003, 05:01:00 PM
-
No, it's not confirmed at all. Other people have 250GB Xboxes on Live and haven't had a problem.
The C2/AFFF code means there's an incongruity between your hardware and your EEPROM data, meaning you may not have locked the drive properly, or something else may be afoot. We haven't managed to get to the bottom of this issue entirely, but every single person I've seen here with a C2 said that the problem went away when they reflashed their EEPROM, or got a new one.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 18, 2003, 05:47:00 PM
-
Skilled work my friend, as for the c2 problem i had recommended before that people reflash and it worked (if you feel im stealing your glory man you can go back and see that i have) but as for the definite answer that the incongruity is there...well...if there were a hats off to you smiley, id be using it here
-
Title: Help for XYZ Live codes - See if you are banned
Post by: akula169 on November 18, 2003, 07:58:00 PM
-
So, are you trying to say that ConfigMagic does not properly support drive locking for 250g drives? It certainly works well enough to get past the boot checks...
Why is it that my the EEPROM I have installed is working fine with a 120, but not with my 250?
I'll try swapping EEPROMS from my other box, but I seriously doubt that it will solve my problem - unless there is something with the box version (1.0, 1.1, etc) that allows ppl to use 137g+ drives on XBL without problems.
I understand you might not have the answers, but I'm just going by the obvious logic here. I don't see a need to go out and get another EEPROM if that really isn't my problem. It looks to be that the system is not happy with *something* that the 250g is saying to the system.
My 250g is a WD2500 - perhaps the other people that have gotten XBL to work have a different model?
Let's try to use my data to help figure out what's wrong here, instead of simply trying to shoot me down and move on...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: CZECH on November 18, 2003, 08:49:00 PM
-
I am having the EXACT same problem as akula69...I also have a Western Digital WD2500 the replaces my WORKING 120(Also a WD)
The 250 shows as locked in both ConfigMagic and my Evox settings
X:0000-F001
Y:00C2-01E4
Z:AFFF-0018
I took my intire C drive from my 120g HDD and loaded it to my 250g HDD w/G drive and I get "Xbox Live Not Found".. When I hook up the 120 everything is cool but when I put the 250 in with the SAME C drive I get the message...The only thing different is the added G drive on the 250 ...Also tried it with a large F with the same results
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cutriss on November 19, 2003, 05:54:00 AM
-
Hey, I'm not blasting anyone here. I'm just saying that it's a bit of a leap of logic to say that since your 250 GB disk doesn't work on Live, nobody else's does.
Read back through the thread - The error codes you guys are getting have been widely stated (as Fuzzy points out), and in all the cases where people have pursued it further, changing the EEPROM fixed the problem. People have gotten C2/AFFF on lower-capacity drives than 250. I think someone even got it with a 40 GB disk, IIRC.
I'm not bagging on the ConfigMagic folks either, but from what I've seen, it's not as foolproof as using ATAPWD and such to lock a drive. Try plugging your old 120 in, do an EvoX backup, and use HDDUnlock/ATAPWD/Ghost to lock the new one.
If I had a bigass drive like that myself, I'd do it, but I just bought a 120 four months ago, and I'm hoping to get a DVD+R over Christmas, so no new HDs for me anytime soon...
-
Title: Help for XYZ Live codes - See if you are banned
Post by: CZECH on November 19, 2003, 04:47:00 PM
-
Where can I get a guide to help me try this...I have Windows XP
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 19, 2003, 05:50:00 PM
-
Search/Tutorials/Google it
-
Title: Help for XYZ Live codes - See if you are banned
Post by: CZECH on November 20, 2003, 11:24:00 PM
-
Bro I have been searching...I cant find UnlockHDD....The only thing on xbins is the SourceCode
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cutriss on November 21, 2003, 12:55:00 PM
-
Are you looking for UnlockHDD or HDDUnlock? Make sure you're looking for the latter, and not the former. And I think it's hosted on this site too, BTW.
I just checked, and indeed it is, as are quite a few of the apps mentioned in that howto. Look in the Tools section.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: CZECH on November 21, 2003, 10:47:00 PM
-
Thanx
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 22, 2003, 06:24:00 AM
-
More *gasp* codes...need *gasp!* more codes *blech*
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cutriss on November 23, 2003, 07:19:00 AM
-
Czech, how did it work? Have you relocked your drive yet?
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Cutriss on November 23, 2003, 12:16:00 PM
-
Czech - Nobody's denying that your HD is locked. I'm saying that your HD may be incorrectly locked.
What problems are you having with DOS?
It's not that we want you to stress over this, but if we can confirm this problem, then we'll have a good idea about why everyone else is getting a C2/AFFF error message.
-
Title: Help for XYZ Live codes - See if you are banned
Post by: Fuzzy on November 26, 2002, 08:08:00 PM
-
IMPORANT: Since this information has been posted a lot has been revised. Reading this will tell you nothing. You are better off browsing towards the middle of the thread. I am leaving this info intact for reference but alot of it has been changed through time.
This is a re-post of my discoveries as a seperate topic.
Ok, ive looked through a lot and here's how its working.
NEW: W Update: The W code changes depending on your "flow" rate half duplex or full duplex. (Special thanks to Cutriss)
X. First of all, the first four numbers of x should always be zeros. They SHOULD always but I haven't seen one that isn't. If it isn't that is most likely not a problem
Y. 00A8 seems to be common among banned and not banned boxes. Now here is where the problem is. Apparently 6860 indicates an LPC mod that is enabled or a non switched non-LPC mod enabled. 6820 means that the system had once had a modchip in it but at the moment is not running. Other wise it should be something like 4840 or 4820.
NEW INFO:
00C2 In your second Y code is almost definitely an unconformity in Eeprom info. This is caused by either editing the eeprom so that parts do not match, or other types of unmatching data (can be caused by replacing parts in the xbox or locking and unlock attempting with different things.) New Info! (Not Confirmed)
Post by: LafferUSA on November 02, 2005, 03:03:00 PM
Post by: killah2k3 on April 05, 2003, 09:48:00 AM
W:0000-000B
X:0000-F001
Y:00a8-6840
z:8015 - 190D
looks like most of em
now gonna flash other eeprom hehe
Post by: sidewinder33 on November 02, 2005, 07:13:00 PM
Post by: LafferUSA on November 02, 2005, 11:58:00 PM
I follow these exactly...
-Move the EEPROM.BIN file into that DATA directory, overwriting the EEPROM.BIN file that is already there.
-Load up Configmagic.
-Select "LOAD XBOX EEPROM" in the menu.
-Select "UNLOCK HD" in the menu.
-Load the EEPROM.BIN file in the DATA directory by choosing "LOAD EEPROM FROM .BIN FILE"
-Now, select "UPDATE XBOX EEPROM" in the menu.
-In the menu, select "LOAD XBOX EEPROM". You will notice your EEPROM is now different! Success
-Select "LOCK HD" from the menu.
At the end when I hit LOAD XBOX EEPROM, it goes back to my original EEROM. The keys are different before when I hit UPDATE XBOX EEPROM. But as soon as I hit LOAD XBOX EEPROM my original goes back. So I just lock it and go back to normal.
What the hell is wrong. I tried about 3 new EEPROMs.
Post by: celare on November 06, 2005, 01:23:00 PM
Post by: Fuzzy on April 05, 2003, 06:38:00 PM
| QUOTE (killah2k3 @ Apr 5 2003, 01:48 PM) |
| after 2 days ... banned W:0000-000B X:0000-F001 Y:00a8-6840 z:8015 - 190D looks like most of em now gonna flash other eeprom hehe |
yea nothin new here, banned
Post by: M@rtin on April 08, 2003, 01:56:00 AM
So over the weekend, I got a switch put in and tried again... I have a Netgear MR314 wireless router which needs a little configuration - check this link for some help with getting connected: http://www.ugvxfaq.pwp.blueyonder.co.uk/livefaq.htm - basically there are workarounds for certain routers such as mine...
Anyway to cut a long story short, it eventually worked and and I got to the signup screen
Going back to the network setup, I get these codes:W: 0000-000B
X: 0000-000D
Y: 00AB-4800
Z: 0000-0000
This is with a Pal xbox, lpc cheapmod, retail HD with evox bios/apps loaded, and the switch off. Connection through netgear router as mentioned, manual IP/DNS settings, xbox IP added as DMZ server in router config... hopefully that's all the info you need?!
Post by: rasstar on December 07, 2005, 11:27:00 AM
is there any solution to this problem? Anyone have any ides on what i can do?
Post by: sidewinder33 on December 10, 2005, 10:17:00 PM
QUOTE(LafferUSA @ Nov 3 2005, 12:05 AM)
Alright I got a new eeprom, but when I try to change it, I can't. I use ConfigMagic. And here is what happens.
I follow these exactly...
-Move the EEPROM.BIN file into that DATA directory, overwriting the EEPROM.BIN file that is already there.
-Load up Configmagic.
-Select "LOAD XBOX EEPROM" in the menu.
-Select "UNLOCK HD" in the menu.
-Load the EEPROM.BIN file in the DATA directory by choosing "LOAD EEPROM FROM .BIN FILE"
-Now, select "UPDATE XBOX EEPROM" in the menu.
-In the menu, select "LOAD XBOX EEPROM". You will notice your EEPROM is now different! Success
-Select "LOCK HD" from the menu.
At the end when I hit LOAD XBOX EEPROM, it goes back to my original EEROM. The keys are different before when I hit UPDATE XBOX EEPROM. But as soon as I hit LOAD XBOX EEPROM my original goes back. So I just lock it and go back to normal.
What the hell is wrong. I tried about 3 new EEPROMs.
Do you have a backup of you old eeprom on your hdd? If you do it might explain this. Other than that I can't tell you what to do. I mnot all that familiar with configure magic. I use my chip os to do all my mucking.
QUOTE(The Keyser @ Nov 6 2005, 09:47 AM)
Thought I'd add my comments, basically was having trouble and getting this:
My codes are:
W:0000 000B
X:0000 F009
Y: 00C2 01E4
Z:AFFF 0618
L: 0ms (0ms)
P: 0/0
have xenium, but loading retail bios.
Did a restore setting from backup and hey presto worked. Think I had tinkered with regions settings for DVD.
Ah, gotta love those crazy backups, this is an example of just how sensitive eeproms are.
QUOTE(rasstar @ Dec 7 2005, 06:14 PM)
Here are my codes
W 0000 - 000B
X:00c2 - 03C0
Y:00C2 - 03C0
Z: 0000 - 0000
l: 0 MS (0 MS)
The first thing I would suggest is reflash your eeprom from your backup. if you dont have one then just about the only fix is to get a new eeprom.
Post by: sidewinder33 on December 12, 2005, 11:54:00 AM
QUOTE(rasstar @ Dec 12 2005, 08:46 AM)
I got a new eeprom from Xodiiak and it gave the same error. Got another eeprom from a friend who never use Live and it worked.
hhhmm odd xodiiak or zodiiak? Zodiiak is one of the most trusted eeprom sellers on the scene. I'm sure if you told him that it didnt work he would have gladly given you another. good that you got back on live. Make sure that you save a backup right now. this will save you many headaches later on if your like me and you f with shit.
Post by: allstar1710 on December 12, 2005, 01:30:00 PM
For the first window (W,X,Y,Z codes):
W: 0000-000B
X: 0000-F001
Y: 00C2-01E4
Z: AFFF-0018
L: 0 ms (0 ms)
For the second window:
MT:1 (0015-00F0)
IC:1 (0015-00F0)
NT:0
I have a new HDD and a new eeprom in that made those numbers come up.
I used configmagic to put them this eeprom in. Is there a problem with how the HDD was locked, or is it another problem that is fixable?
Post by: rasstar on December 12, 2005, 02:15:00 PM
Post by: sidewinder33 on December 12, 2005, 04:52:00 PM
Post by: allstar1710 on December 12, 2005, 07:57:00 PM
I have not edited my eeprom and I've followed all of the instructions for how to put it in.
I am going to try and use another HDD locker and see if that fixes my problem.
Any other suggestions though?
I don't really want to pay for another new eeprom, but if I don't have a choice then I guess I will.
Post by: rasstar on December 12, 2005, 11:01:00 PM
Post by: M@rtin on April 09, 2003, 04:16:00 PM
OK, the pack arrived today and guess what? "xbox live not found" - DAMN!!! My XYZ codes haven't changed though, so does that mean I'm not banned or what?? Majorly confused now
Post by: deadline123 on December 20, 2005, 03:59:00 PM
X:0000-F001
Y:00A8-6860
Z:8015-190D
I'm pretty sure im banned..but i'm kinda new to all this eeprom stuff and if anybody would like to help me out , i'd really appreciate it..just kinda fill me in on what i need to do/get to get back on live....thanks
Post by: Hitcher on December 22, 2005, 02:26:00 PM
So I checked my XYZ numbers and they are as follows -
X:0000-F001
Y:008A-0FE0
Z:AFFF-0018
Looking at the first post it appears there's a hardware conflict but how do I fix this?
Post by: allstar17107 on December 22, 2005, 06:21:00 PM
Hitcher, I had the C2 problem which I think is like the 8A problem. You probably need to get a new eeprom or try the fixes like Enigmah Videomode switcher or alternate hdd locker (from configmagic)
Post by: juanman on December 27, 2005, 03:27:00 PM
W: 0000-000B
X: 0000-F001
Y: 00A8-6860
Z: 8015-190D
I know the Y shows the 6860 as being a LPC mod, but i never opened the xbox! i logged out of one account, went to log into another and it shows up as being a moddified xbox when i do the trouble shooter! im like WTF!?!?
its never been touched, i have one xbox that i use for modding, it even has a Live blocking bios so i cant even attempt to get onto live. so i dont know, its bullshit. i need my halo fix.
Post by: Avrame on December 27, 2005, 07:14:00 PM
W: 0000-000B
X: 0000-F001
Y: 00A8-6840
Z: 8015-190D
L: 0 ms (0 ms) P:0/0
After I press "B", a screen comes up
MT: 0 (8007 - 274C)
IC: 0 (8007 - 274C)
NT: 0
I'm getting a moddified xbox alert now...
Post by: Avrame on December 27, 2005, 07:44:00 PM
QUOTE
v1.6 Halo Le Xbox
You in the USA?
Maybe just my guess... but could xbox be banning all non USA xbox in the USA? Like with my eeprom, it came from overseas, I think france, but I just got a new hdd, flash the eeprom, lock the hdd and it worked for a good 5 months. Perhaps after this xmas, MS is gettiong paranoid with all the 360's floating around, and put up a new wall of security to watch for the import japanese 360's, seeing that they are going for $150, and are well in stock in japan.
As far as I'm concerned, the japanese 360 do play some american games, are alot cheaper for the bundle, and are easy to import, maybe MS doesn't like that, so they are attempting to ban all xboxes in the USA that aren't american made eeproms. The 1.6 Halo LE is a canadian xbox right? And from your claims, it is a virgin... that's my explanation for it so far.
Post by: juanman on December 27, 2005, 10:57:00 PM
i determined it was a 1.6 by the manufacturing date, dash, kernel, and some other stuff.
but yeah, i called customer support, talked to the supervisor, and they said it should be fixed in 48-72 hours.
kinda long since some of my friiends are online playing now on their Xbox's
Post by: Avrame on December 27, 2005, 11:57:00 PM
Post by: BansheeTwin350 on December 28, 2005, 08:46:00 AM
X 0000-F001
Y 00A8-6840
Z 8015-190D
And it now comes up and says my XBOX is modified. I have been using live for about 3 months now and nothing has changed on my side. I called xbox.com and they said that they did an update on their system at midnight Monday night. Not sure if that is true or the guy I was talking too was full of it. Anybody else have any ideas on what this could be before I go buy another XBOX?
Post by: Avrame on December 28, 2005, 06:20:00 PM
W: 0000-000B
X: 0000-F001
Y: 00A8-4840
Z: 0000-0000
L: 65535 ms (65535 ms) P:0/0
After I press "B", a screen comes up
MT: 0 (8007 - 274C)
IC: 0 (8007 - 274C)
NT: 3
Post by: juanman on December 28, 2005, 07:03:00 PM
maybe this could help some of you with the 6860 code
Post by: Avrame on December 29, 2005, 04:58:00 AM
W: 0000-000B
X: 0000-F001
Y: 00A8-6860
Z: 8015-190D
L: 0 ms (0 ms) P:0/0
After I press "B", a screen comes up
MT: 0 (8007 - 274C)
IC: 0 (8007 - 274C)
NT: 0
Post by: Avrame on December 29, 2005, 09:03:00 AM
As for me, I dunno. My xbox went from the "modded error" to the "connection error", then back the the "modded error" in the course of 2 days. I was tempted to call up MS, but seeing that I had opened my xbox, I have nothing to say in my defense.
Post by: Fuzzy on April 11, 2003, 11:51:00 AM
| QUOTE (M@rtin @ Apr 9 2003, 07:16 PM) |
| OK, the pack arrived today and guess what? "xbox live not found" - DAMN!!! My XYZ codes haven't changed though, so does that mean I'm not banned or what?? Majorly confused now |
codes...
Post by: M@rtin on April 11, 2003, 03:06:00 PM
Post by: nope2dope on January 07, 2006, 09:08:00 PM
They are both this... both v1.6, one has x2 and one x3, both have stock hdd, x3 has 80gb with switch.
x:0000-F001
y:00A8-4860
z:0000-0000
Post by: Fuzzy on January 07, 2006, 11:12:00 PM
Man, coming back might be more fulfilling than I would expect...
Post by: AirrezzZ on April 14, 2003, 02:39:00 AM
I turned off my chip now
- Here are my XYZ codes, I haven't played live since it tried to connect to live with the chip on. (all green lights)
perhaps something important:
I was playing with my XOBX at a friends house, but the XYZ codes are "made" at my place. So the Xbox haven't had power for say half an hour (driving back to my place and reconnecting it)
X 0000-000D
Y 00A8-4800
Z 0000-0000
IP and DNS are set manualy, the rest is disabled (PPPOE and advanced settings)
I live in the Netherlands and got an ADSL basic (756DL x 128UL) connection
- XYZ with IP automatic and DNS manual (all green lights)
X 0000-F009
Y 00A8-4860
Z 0000-0000
- XYZ with IP manual and DNS automatic
got a DNS error
cables connected
IP not confirmed
DNS not resolved
Xbox Live not found
X 0000-0013
Y 0000-0000
Z 0000-0000
- XYZ with IP and DNS automatic (all green lights)
X 0000-F001
Y 00A8-4860
Z 0000-0000
- XYZ with IP and DNS automatic, cable not connected
X 8000-0011
Y 0000-0000
Z 0000-0000
got same XYZ with IP manual DNS automatic
got same XYZ with IP automatic DNS manual
got same XYZ with IP and DNS manual
---------------------------
Looks like I'm not baned (yet)
I haven't read this whole topic so perhaps the following question has been asked and aswered earlier:
Will my xbox remember I tried to connect to live with my chip on even though there was no connection to live (cause I had a systemlink cable to another xbox)??
Post by: nachonut on April 14, 2003, 10:40:00 AM
| QUOTE (M@rtin @ Apr 10 2003, 12:16 AM) |
| OK, the pack arrived today and guess what? "xbox live not found" - DAMN!!! My XYZ codes haven't changed though, so does that mean I'm not banned or what?? Majorly confused now |
Just because it says xbox live not found, doesn't mean you are banned. I've had problems before with a static ip, try taking that off and connect again. If anything, run the setup from the disc, with a new xbox., sometimes it won't connect to xbox live even if it has the tab
Post by: M@rtin on April 15, 2003, 06:15:00 AM
| QUOTE (nachonut @ Apr 14 2003, 06:40 PM) |
| Just because it says xbox live not found, doesn't mean you are banned. I've had problems before with a static ip, try taking that off and connect again. If anything, run the setup from the disc, with a new xbox., sometimes it won't connect to xbox live even if it has the tab |
Yeah I thought it could be a temporary problem, but the fact that it was working the day before with exactly the same settings was strange I thought... plus the fact that the "xbox live not found" msg appeared almost immediately after the dns step completed, so it's not like it was looking for a connection and timing out.
In any case, I got a new eeprom today and got on Live no problems, all signed up and playing games - my codes are still the same as before:
W: 0000-000B
X: 0000-000D
Y: 00AB-4800
Z: 0000-0000
Post by: A Murder of Crows on February 25, 2006, 09:13:00 PM
X: 0000-F001
Y: 008A-0C62
Z: AFFF-0018
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
NT: 0
Virgin eeprom, new hard drive. Can't c
Problems:
No Live found
no S/N listed
updated eeprom with config magic 1.6 final thru Krayzie's NDure 1.1 Professional Mode.
thanx all
Post by: A Murder of Crows on February 25, 2006, 10:46:00 PM
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 008A-0FE0
Z: AFFF-0018
L: 0 ms (0 ms)
P: 0 / 0
1.00.5971.01
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
NT: 0
S/N is now showing up. Xbox Live not found. No idea as to what to do or where to go next. Contacted Zodiaac about this as it was one of his.
thanx all
Post by: Ndure protagonist on March 03, 2006, 09:18:00 PM
As you likely did too, I attempted to find 008A-0FE0 with X-S' pathetic Google search. However, me being me, I then tried Google and one of the corresponding hits (in this very thread) follows:
{8 That's not the only reason I'm sharing though; try to read it without glancing at the next poster's avatar... 8}
http://forums.xbox-scene.com/index.php?act...dpost&p=1862292
{8 Plus, later in that page the same X-S vendor you mentioned supplied the solution to Ghaz ... hmm ... 8}
Post by: b166ir on April 21, 2003, 03:18:00 PM
here are my codes
i'll just write everything i see
1.00.5335.01
W: 0000 - 000B
X : 0000 - F001
Y : 00A8 - 6820
Z : 8015 - 190D
UL: 0 DL: 0 Kb
L: 0 ms (0ms) P: 0 / 0
Post by: crackz0r on April 21, 2003, 04:18:00 PM
Post by: b166ir on April 21, 2003, 04:37:00 PM
used eepromer very good program ! very easy to use
now i can go back to live everything works fine
now my codes are
1.00.5335.01
W: 0000 - 000B
X : 0000 - F001
Y : 00A8 - 4860
Z :0000 - 0000
UL: 9765 Kb DL:1154 Kb
L: 157 ms (172 ms) P:20 / 20
Post by: gozer on April 24, 2003, 09:24:00 PM
Evox d.6/2.6
New York City
Locked 120gb Drive
(Not Banned)
Static IP Configuration
x: 0000 000D
y: 00A8 4800
z: 0000 0000
It seems most people with a y: 0000 48** are using evox variant bins (color, different versions, etc)...
Post by: CompFreak07 on June 08, 2006, 06:58:00 PM
Here are my W, X, Y, Z, L, and P codes
W: 0000-000B
X: 0000-F001
Y: 0088-1C40
Z: 0000-0000
L: 0ms(0ms)
P: 0/0
Any Sugegstions?
Post by: LimpNoodle on April 26, 2003, 10:25:00 PM
W: 0000 - 0015
X: 0000 - F001
Y: 0088 - 1C60
Z: 0000 - 0000
My Bios details etc are below.
Post by: Fuzzy on April 27, 2003, 07:48:00 AM
| QUOTE (LimpNoodle @ Apr 27 2003, 02:25 AM) |
| I presume I'm banned.. since I can't even connect with a direct connection from the Xbox to the Cable Modem. FWIW I'm in the UK, using NTL Broadband. All settings below are set to Automatic. W: 0000 - 0015 X: 0000 - F001 Y: 0088 - 1C60 Z: 0000 - 0000 My Bios details etc are below. |
Play around with your settings, if not, reflash your eeprom (the one you have now), if still nothing, new eeprom (report everything to me every step of the way im trying some new stuff)
Post by: MD 20I20 on June 29, 2006, 02:45:00 PM
after reading this topic i am wondering if it is the hard drive in the xbox, the xbox itself, or my connection. i also get the 00A8 code on Y which i think means i am banned but is there anyway to change this
Post by: LimpNoodle on April 28, 2003, 03:43:00 AM
Post by: killab443 on July 12, 2006, 11:45:00 PM
W: 0000 - 0015
X: 0000 - F001
Y: 00C2 - 03C0
Z: 0000 - 0000
MT: 1 (0015 - 00F0)
IC: 1 (0015 - 00F0)
NT: 0
In my connection status my xbox goes threw all steps and it says "xbox live not found" in the last step. I called xbox they said there wasnt a ban on my account. But what else is going on here. I installed evox and thats when my connection stopped working. I am able to ftp and use evox. I even restored it to factory and that did not help the connection
Post by: pricemeista33 on July 16, 2006, 02:39:00 PM
X:0000-F001
Y:00C2-01E4
Z:AFFF-0018
After trying to go on live there's a message stating that there are technical difficulties and "Xbox Live is not found."
This post has been edited by pricemeista33: Jul 16 2006, 09:40 PM
Post by: fabbers on July 17, 2006, 02:21:00 PM
X 0400 - F001
Y 00AB - E840
Z 0000 - 0000
L: 0ms
P: 0/0
I'm taking it the latency and p = packets being zero don't bode well either!
Help (IMG:style_emoticons/default/unsure.gif)
Post by: fabbers on July 18, 2006, 01:14:00 AM
QUOTE(fabbers @ Jul 17 2006, 08:52 PM)
Not sure if i'm banned won't connect though and states an MTU issue,
X 0400 - F001
Y 00AB - E840
Z 0000 - 0000
L: 0ms
P: 0/0
I'm taking it the latency and p = packets being zero don't bode well either!
Help
D'oh after all my concerns it appears that my default gateway settings on the xbox had changed, the xbox was unplugged for a wekk and when i next used it it prompted for time/date etc. but never double checked the network settings as i thought dhcp would have been fine.
Oh well chalk that one up,
Cheers
fabbers
Post by: Jse on April 28, 2003, 02:05:00 PM
w 0000 - 000b
x 0001 - 8025
y 00a8 - 6800
z 8015 - 190d
from what i have gathered as this is like my 10th eeprom is
if you enter the m$ dashboard with the mod on you get banned
even if you dont click on live
ok here is another idead if every on sent a copy of their banned eeproms to a cracker surley he could create a keygen for the serial hdd key and online key which is valid worth a shot
Post by: Chaoswarrior37 on August 15, 2006, 11:50:00 AM
I have a 1.6 NTSC Xbox with a 160 GB HDD using SP.Ice running X2 BIOS. lol
My account is not banned as I connected on Live with my account on my friend's Xbox without any problem.
I tried using the Enigmah Videomode Switchdisk application to switch it to PAL and then back to NTSC, but all it did was jack up my screen which took forever to revert back to NTSC.
1.00.5971.01
W: 0000 - 000B
X: 0000 - F001
Y: 008A - 0FC0
Z: AFFF - 0018
L: 0ms (0 ms) P: 0 / 0
MT: 1 (0015 - 00F0)
IC: 1 (0015 - 00F0)
NT: 0
Post by: jotavip on August 24, 2006, 02:10:00 AM
my codes are:
1.00.5971.01
W: 0000 - 000B
X: 0000 - F001
Y: 00C2 - 03E0
Z: 0000 - 0000
I think is this "C2" that are giving me this error. I tried the ntsc-pal switcher, but no success.
Anyone has any suggestions?
Thanks!!
Post by: theman2004ad on October 18, 2006, 05:26:00 PM
W: 0000-0021
X: 0000-000D
Y: 0C8A-0D80
Z: AFFF-0D16
any help would be great cheers
Post by: Hinotori on May 06, 2003, 09:46:00 AM
| QUOTE (jse @ Apr 28 2003, 11:05 PM) |
| ok using a executer 2 chip with on off switch but banned my codes are w 0000 - 000b x 0001 - 8025 y 00a8 - 6800 z 8015 - 190d from what i have gathered as this is like my 10th eeprom is if you enter the m$ dashboard with the mod on you get banned even if you dont click on live ok here is another idead if every on sent a copy of their banned eeproms to a cracker surley he could create a keygen for the serial hdd key and online key which is valid worth a shot |
This is weird, because if it was this way, my XBOX should've been banned since December, when accidentally I let the dashboard execute with the mod on... I wouldn't recommend anyone to try this, but I think that this happened 4 or 5 times, and I'm still enjoying Live!....
Post by: Twagz on December 28, 2006, 03:27:00 PM
it fails on IP address and im lost now...
this is the code for ya
W: 0000 - 000B
X: 4000 - 1001
Y: 0000 - 0000
Z: 0000 - 0000
Any help here would be hot
cheers
twagz
Post by: Fuzzy on May 11, 2003, 02:21:00 PM
| QUOTE (Hinotori @ May 6 2003, 01:46 PM) | ||
This is weird, because if it was this way, my XBOX should've been banned since December, when accidentally I let the dashboard execute with the mod on... I wouldn't recommend anyone to try this, but I think that this happened 4 or 5 times, and I'm still enjoying Live!.... |
you can go to the dashboard relatively safely (i wouldnt recommend it) but your not always banned.
Post by: MadEx on May 11, 2003, 10:13:00 PM
Post by: BlackRob183 on January 11, 2007, 03:08:00 AM
Error Code:
W: 0000-000B
X: 0000-F001
Y: 0000-0000
Z: 0000-0000
That's what happens whenever i try to log onto Live, then I either need to somehow reset my IPs and then it works for a little while again and then after a while it errors out?
Post by: TechnoGamer on April 01, 2007, 04:45:00 PM
1.00.5971.01
W: 0000-000B
X: 0000-F001
Y: 0000-0000
Z: 0000-0000
MT: 1 (0015-00F0)
IC: 1 (0015-00F0)
That is with the softmod on, as I get an error 21 if I try to access XBL through an Live enabled game. From coldboot.
Post by: bwannon on May 17, 2007, 01:21:00 PM
I all of the sudden can't connect to live, this is the codes test connection gives me for live:
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 6820
Z: 8015 -190D
Any ideas?
Post by: skforty on May 17, 2007, 01:28:00 PM
Post by: bwannon on May 17, 2007, 02:12:00 PM
QUOTE(skforty @ May 17 2007, 03:04 PM)
just got some insider info, i think they are going to start banning. I heard about this yesterday. But i dont have all the details yet, what drive and firmware do you have?
Hitachi, Garyopa 2.3 stealth.
Post by: loco502 on May 19, 2007, 02:55:00 PM
Post by: princediabloxp on June 10, 2007, 12:02:00 AM
X:0000-F001
Y:20A8-4840
Z:8015-1007
what means this code??? ban or not ban???
This post has been edited by princediabloxp: Jun 10 2007, 07:04 AM
Post by: sheriff2006 on July 10, 2007, 08:02:00 AM
QUOTE(princediabloxp @ Jun 10 2007, 07:38 AM)
W:0000-000B
X:0000-F001
Y:20A8-4840
Z:8015-1007
what means this code??? ban or not ban???
Not banned. 1007 means "need to update dashboard"
Sheriff
Post by: kipsate on August 17, 2007, 04:38:00 AM
When microsoft started to ban 360s i didn't connect to live anymore so i assumed i didn't got banned.
Now i flashed my 360 again with the newest firmware but when i try to connect to live it keeps failing.
my xyz codes are:
x:0000-f001
y:00A8-6820
z:8015-190D
I read some posts and i think i'm banned but i didn't connect to live for a long time however i did update my xbox with the spring update. Am i banned?
thanks a lot for help
-MIchael
Post by: Toxis on August 27, 2007, 08:47:00 AM
x: 0400 - f001
y: 0c88 - 1ceo
z: 0000 - 0000
is my provider playing tricks on me, or am I banned for being a nasty pirate (Aye matey! jarrr)?
thanks in advance
edit: I haven't done any updates lately... so no spring update I think...
This post has been edited by Toxis: Aug 27 2007, 03:48 PM
Post by: KnobHead on September 04, 2007, 08:47:00 PM
Culd you help as I have searched all over the net but no one has the same XYZ Codes I can't connect to live but I don't get the message that I have been booted also in my network connections the xbxlive is wat fails. Im pretty sure I have been booted but before I change the firmware and buy I new 1 for online purpose I want to get a second opinion.
Codes
W: 0000-000B
X: 0000-F0009
Y: 30A8-4840
Z: 0000-0000
Also I have the iXtreme v1.2 Rev3.
Cheers
Post by: angrykid on September 29, 2007, 08:39:00 PM
QUOTE(kipsate @ Aug 17 2007, 11:14 AM)
Hi i have a modded xbox360 for over a half year now.
When microsoft started to ban 360s i didn't connect to live anymore so i assumed i didn't got banned.
Now i flashed my 360 again with the newest firmware but when i try to connect to live it keeps failing.
my xyz codes are:
x:0000-f001
y:00A8-6820
z:8015-190D
I read some posts and i think i'm banned but i didn't connect to live for a long time however i did update my xbox with the spring update. Am i banned?
thanks a lot for help
-MIchael
I get those same error codes exactly under xbox live section of the networking tests...
I would love to know what they mean also (if I'm totally screwed or not)
I mean, if I'm banned, big deal... I'll sell the console... haha
Post by: salasarjay on October 11, 2007, 04:15:00 PM
w:0000-000B
x:0000-F001
y:0000-0000
z:0000-0000
am i banned? what should i do?
Post by: jacktheman on October 30, 2007, 05:14:00 AM
W: 0000-000B
X: 0000-F001
Y: 0C88-1C40
Z: 0000-0000
What does it mean? Thanks in advance.
Jack
EDIT: Nevermind, Xbox Live was down.
This post has been edited by jacktheman: Oct 30 2007, 12:16 PM
Post by: R3FuG33 on December 04, 2007, 05:36:00 PM
W: 0000 - 000B
X: 0000 - F001
Y: 000A8 - 6840
Z: 8015 - 190D
Thanks for the help guys!
Post by: jimbo james on December 08, 2007, 04:55:00 PM
Updated, now I can't sign in to Live. Any know what these codes mean?
W 0000-000B
X 0600-F001 (or 0200-F001 depending on test)
Y 2048-4840
Z 0000-0000
Thanks
Post by: wincent on December 09, 2007, 10:38:00 AM
report:
W: 0000 - 000B
X: 0000 - 002D
Y: 002C - 0380
Z: 0000 - 0000
Post by: irishdude199 on March 09, 2008, 11:54:00 PM
my error codes are
1.00.5971.01
W:0000-000B
X:0000-F001
Y:00C2-01C4
Z:AFFF-0018
From what i read my eeprom is jacked up but what i don't know is what to do now.
Post by: irishdude199 on March 10, 2008, 08:51:00 PM
W:0000-000B
X:0000-F001
Y:00C2-0042
Z:0000-0000
Plz help!!!! (IMG:style_emoticons/default/huh.gif)
Post by: irishdude199 on March 11, 2008, 11:05:00 AM
Post by: Timmymna on May 31, 2003, 12:59:00 PM
x 0001 - 8005
y 00a8 - 4800
z 0000 - 0000
I have xbox 1.0 I installed a new hd yesterday and decided today to see if I could get Live working.
When I try to play the MotoGP demo I go to sign in, press A on my GamerTag and it comes up with "Your Xbox console cannot to Xbox Live" then gives me the options "Troubleshoot" and "Sign out" When I goto Troubleshoot, all four things come up green, I had my mod chip switched off while it updated and while trying to play. I tried replacing the EEPROM with another from a friend that has never been used on Live before and I still get the same problem.
Can anyone help or tell me what I'm doing wrong please.
Post by: sammeh122 on April 17, 2008, 06:31:00 PM
W 0000-000B
X 0001-8005
Y 0002-0180
Z AFFF-0016
Appreciate the help
Post by: exeter56 on April 20, 2008, 09:38:00 PM
If you failed the Xbox Live test and got a Z code 8015-190D, then it means your console is automatically banned on Xbox Live and that is irreversible. No questions asked.
Z - 0000-0000 is usually just a connection issue. You should try connecting the console directly to a modem or try it at another location (like at a friend's house and more preferably the ISP should be different from what you are using) and check if that would work.
As for the Z code AFFF-0016, we've been getting a lot of calls like these over the past 2-3 weeks now. This issue is currently being investigated. If you are experiencing this issue and you are using a console which was sent back to you from repair (refurbished consoles), try the usual steps like powercycling your console and networking devices; or try a wired, direct connection with your modem (NOT routers and gateways - if you have these and cannot do a direct modem connection, open the ff. ports in your router or gateway: UDP 88, UDP 3074, TCP 3074 and also try enabling UPnP), or try connecting the affected console at a different place and location. If you are still getting the Z: AFFF-0016 status code, please call tech support and when you do, make sure you have the ff. information ready:
- the replacement console's serial number (accessible at settings-console settings-system info)
- the replacement console's console ID (same location)
- service request number/reference number of the console repair that was given to you by the hardware department back then to track the status of your repair (or if you don't have this anymore, at least kindly confirm that you indeed had the console repaired or just provide the serial number for us to track it down).
If all of these requirements are met, the issue would then be escalated to the upper management. You would most likely be asked for callback details so that a supervisor would be able to contact you as for what resolution would be reached regarding this issue.
Good luck!
Post by: viperakos on August 06, 2008, 06:20:00 AM
X: 0000-F001
Y: 008A-0FC0
Z: AFFF-0018
Can anyone to help me with this problem codes?How to fix this problem because i search it and i didn't find the solution.(Sorry for my english i don't speak very well the english language.)
Post by: pcw on August 11, 2008, 01:51:00 PM
X: 0000-F001
Y: 00C2-03C0
Z: 0000-0000
I've just had my 360 in for repair for 3RROD. My 360 was modded and I didn't even bother flashing it back to factory before sending it in (since the 360 sticker was lost anyway). But MS didn't seem to care that it was modded and replaced the whole thing with a new motherboard and new dvd drive (Benq). It runs more quietly now than before
Anyhow, before I was banned from Live. It said that during the network test. But now when I'm doing the network test it says "Technical Configuration Error. Please contact xbox support.". So I did that but they couldn't figure out what was wrong and wanted me to send the 360 in for service. I rather not do that since I've gone through the hassle of flashing the Benq drive just recently. And just have it sent in for the technicians to figure out that it is banned. What is strange though is that the xbox support didn't mention anything that it was banned or anything even though I gave them my serialnumber and the error codes.
Post by: chrcol on September 29, 2008, 07:41:00 AM
QUOTE(salasarjay @ Oct 11 2007, 11:51 PM)
hi guys, i have iextreme 1.2 i believe. i was playin my 360 and nhl 08(iwas logged-in in XBL silver) then tried to update rosters and it said i need an xbox live gold to get it.. then i played my demos. then went out for a bit,, then wen i came back to play again it wont ley me connect to XBL then when i tested the XBL connection it failed "MTU" and showed me these code..
w:0000-000B
x:0000-F001
y:0000-0000
z:0000-0000
am i banned? what should i do?
Hi
I got the same message and code exactly.
my scenario.
new xbox360 2 weeks old.
no mod
no flashed drive
no hacks whatsoever if not clear at this point
xbox live worked last week, I discconected the xbox360 for when my parents visited as cable go across settee messy.
today connected backup and got error cannot connect to xbox live.
network test mtu fails with above codes.
I can confirm from pc mtu discovery works, mtu is configured as 1500 on router so it is defenitly not a router problem, same router worked last week as well. For good measure I forwarded ports but made no difference.
Post by: jlett on September 30, 2008, 02:47:00 AM
QUOTE(chrcol @ Sep 29 2008, 07:17 AM)
Hi
I got the same message and code exactly.
my scenario.
new xbox360 2 weeks old.
no mod
no flashed drive
no hacks whatsoever if not clear at this point
xbox live worked last week, I discconected the xbox360 for when my parents visited as cable go across settee messy.
today connected backup and got error cannot connect to xbox live.
network test mtu fails with above codes.
I can confirm from pc mtu discovery works, mtu is configured as 1500 on router so it is defenitly not a router problem, same router worked last week as well. For good measure I forwarded ports but made no difference.
Same thing just happend to me for the first time
I also got the exact same code as you, I have tried reseting everything and refreshing my router and everything is perfect.
I have been playing on xbox live everyday for the last 8 months and tonight for some reason it wont let me sign in to xbox live. I'm 100% sure nothing has changed in the last 20 hours so what gives. If it's a down time they would have told us.
Post by: Xbox-Warrior on October 03, 2008, 06:57:00 PM
What I did was just do the auto config Network part it will say MTU failed then press B to get out and then I turned off my Xbox and back on a few times and it worked for me then.
Post by: TB_88 on June 05, 2003, 11:10:00 AM
When u wnna go back to the dash it goes to xboxdash.xbe... And evoxx "Reset In game" does not work in it...
But I'm not banned have launched the dash with mod like 10 times... The dash can't connect to live or???
Post by: JJSENS on October 31, 2008, 03:50:00 PM
QUOTE(Twagz @ Dec 28 2006, 06:27 PM)
it fails on IP address and im lost now...
this is the code for ya
W: 0000 - 000B
X: 4000 - 1001
Y: 0000 - 0000
Z: 0000 - 0000
Any help here would be hot
cheers
twagz
I have this exact same problem. By exact, I mean the code is exactly the same. Any help would be appreciated.
Post by: CarnageMC on November 01, 2008, 07:00:00 PM
W: 0000 - 000B
X: 0000 - F001
Y: 0000 - 0000
Z: 0000 - 0000
i had the exact same problem but was able to fix it by changing the NAT setting on my router. so far i haven't gotten the error code again.
This post has been edited by CarnageMC: Nov 2 2008, 02:01 AM
Post by: Xiaotjuh on December 08, 2008, 03:50:00 PM
W: 0000-000B
X: 0000-F001
Y: 20A8-48E0
Z: 0000-0000
ID: FFFF-FFFF
Does anyone know what this means? my NAT ports are just open and xbox live works, but soooo slow and my connection just broke when I played Gears of War 2....
Post by: BLazeD on June 13, 2003, 03:31:00 PM
Do you actually have to have an XBL A/C to do this?
I have the XBL Dash fully installed
Post by: BLazeD on June 14, 2003, 03:49:00 AM
I might have gone into the XBL screen with my mod on, cant remember
Under COnnect Status I can connect to Xbox Live
Can some analyse this for me?
Xbox v1.0 UK
PC BioXX
1.00.5225.01
W: 0000 - 000B
X: 0000 - 000D
Y: 00A8-4800
Z: 0000 - 0000
P: 20/22
Post by: Fuzzy on June 14, 2003, 05:21:00 PM
| QUOTE (BLazeD @ Jun 14 2003, 07:49 AM) |
| Dont know if I am banned, XBL isnt here in New Zealand yet so I cant check. I might have gone into the XBL screen with my mod on, cant remember Under COnnect Status I can connect to Xbox Live Can some analyse this for me? Xbox v1.0 UK PC BioXX 1.00.5225.01 W: 0000 - 000B X: 0000 - 000D Y: 00A8-4800 Z: 0000 - 0000 P: 20/22 |
not banned yet
Post by: Xbox-Savage on June 16, 2003, 10:03:00 AM
W: 0000-000B
X : 0000-F001
Y: 00A8-4860
Z: 0000-0000
Post by: Nathan561 on June 16, 2003, 12:02:00 PM
Am i banned?
1.00.5335.01
W: 0000 - 0015
X: 0000 - F001
Y: 00A8 - 4860
Z: 0000 - 0000
Thanks.. i hope I'm not
Post by: Timmymna on June 17, 2003, 09:25:00 AM
y 00a8 - 4800
z 0000 - 0000
Banned?
Post by: nexgenhalo on June 18, 2003, 06:46:00 AM
is it the same?
Post by: maxgeek on June 18, 2003, 09:26:00 AM
y 00A8 - 4860
z 0000 - 0000
Post by: Hijirioni on March 23, 2010, 09:33:00 PM
W: 0000-0021
X: 0000-F001
Y: 20A8-4840
Z: 0000-0000
ID: FFFF-FFFF
I can go online, I've been able to play Left 4 Dead in a multiplayer game. I think my NAT settings are open (I configured them in my routers settings and turned it's firewall off). The XBOX Live test just says I'm connected, it doesn't display NAT or any errors. But if I press Y to check status I get this error code. I can download demos form the store too. But when I try to use Party, Private Chat, or try to play a game with a specific friend we always get errors. I don't know if the issue is on my end or hers as my xbox is pretty new. I've never had issues with my other systems though. Unfortunately I don't have any other friends available to test with.
I'm connected wirelessly and I haven't tested wired or direct connection.
Post by: Rossi NL on June 18, 2003, 03:31:00 PM
From The Netherlands, ADSL (768 kb). Started up with the mod off, got these codes:
W: 0000-0015
X: 0000-F001
Y: 00A8-6820
Z: 8015-190D
I have no idea how to get unbanned again. I saw some messages about Eeprom etc. but I have no clue where to get this or how to use it... Can't I just hard-reset the box or something, like resetting the bios just like on a PC???
Post by: daveofstrength on August 25, 2010, 11:25:00 PM
I own the modern warfare 2 xbox 360 elite
I am using a wired connection.
My xbox live seems to be completely operational and fine, marketplace, games and all
However when i go to test my live connection and press "y" for status i get the following :
Error Status Report
W: 0000 - 000B
X: 0000 - F001
Y: 20A8 - 4840
Z: 0000 - 0000
ID: FFFF - FFFF
I have no clue what this means, i have googled to no end without answers, can someone please help me
Post by: Psychopathic on September 12, 2010, 06:02:00 AM
X: 0000 - F001
Y: 20AB - 4860
Z: 8007 - 000B
Can somebody tell me what my Z is referring to? I tried searching but haven't seen that code...
This post has been edited by Psychopathic: Sep 12 2010, 01:03 PM
Post by: lordvader129 on September 16, 2010, 03:57:00 AM
QUOTE(Psychopathic @ Sep 12 2010, 05:02 AM)
W: 0000 - 000B
X: 0000 - F001
Y: 20AB - 4860
Z: 8007 - 000B
Can somebody tell me what my Z is referring to? I tried searching but haven't seen that code...
probably has to do with XBL being shut down for xbox1
Post by: linnx88 on October 26, 2010, 09:13:00 AM
QUOTE(Spency234 @ Sep 20 2003, 03:35 PM) 
How about this:
W: 0000-000B
X: 0000-F001
Y: 008A-0FC0
Z: AFFF-0018
I got this error yesterday and was worried that I might've gotten banned, but all is good.
What I did to fix this was:
1) Go to the xbox live test screen and go into network management.
2) I have a wireless adapter and so I simply selected my connection and typed in the wrong password for my wireless WPA2 connection to disconnect the xbox from the net.
3) Retyped my password and voila, it reconnected to the net and then to Xbox Live with no issues or errors.
(You can probably do the same with a wired connection, I would try changing a few numbers in the DNS or IP setting on the 360, in order for it to disconnect from your network, and then let it autodetect the settings again)
Woohoo! (IMG:style_emoticons/default/pop.gif) (IMG:style_emoticons/default/jester.gif) (IMG:style_emoticons/default/beerchug.gif) (IMG:style_emoticons/default/flamethrower.gif)
This post has been edited by linnx88: Oct 26 2010, 04:15 PM
Post by: rig8800 on December 15, 2010, 09:03:00 PM
W: 0000 - 0021
X: 4000 - 1001
Y: 0000 - 0000
Z: 0000 - 0000
i dont know what to do!!!!!!!!!!!!!!!!!! i need help!!!!!!!!!!!!!!
IT wont let me connect!!!
Post by: lordvader129 on December 16, 2010, 11:02:00 AM
QUOTE(rig8800 @ Dec 15 2010, 10:03 PM)
CONFUSED!!!!!!!!!!!
W: 0000 - 0021
X: 4000 - 1001
Y: 0000 - 0000
Z: 0000 - 0000
i dont know what to do!!!!!!!!!!!!!!!!!! i need help!!!!!!!!!!!!!!
IT wont let me connect!!!
QUOTE(lordvader129 @ Sep 16 2010, 03:57 AM)
probably has to do with XBL being shut down for xbox1
Post by: sp1kez on January 16, 2011, 07:32:00 PM
W: 0000 - 000B
X: 0001 - 8005
Y: 30A8 - 4800
Z: 0000 - 0000
ID: FFFF - FFFF
Post by: Man With A Bag on January 17, 2011, 04:13:00 AM
QUOTE(sp1kez @ Jan 17 2011, 04:32 AM)
I cant connect this is my code, help is appreciated
W: 0000 - 000B
X: 0001 - 8005
Y: 30A8 - 4800
Z: 0000 - 0000
ID: FFFF - FFFF
Like the man said above; Xbox Live for the original Xbox is no more! It's gone!
Post by: sp1kez on January 17, 2011, 09:51:00 AM
QUOTE(Man With A Bag @ Jan 17 2011, 06:13 AM) 
Like the man said above; Xbox Live for the original Xbox is no more! It's gone!
oops I meant to put this on xbox 360
Post by: lordvader129 on January 18, 2011, 08:53:00 AM
Post by: k1701 on January 29, 2011, 06:11:00 PM
Been trying to connect to Xbox Live,I ran a connection test, it read I was connected to XBL. But I got this error message:
W: 0000-0021
X: 0000-F001
Y: 20A8-4840
Z: 0000-0000
then i got:
W: 0000-0021
X: 0000-F001
Y:20A8-4860
Z:8007-2746
what does this mean?
Post by: MaNoLo75 on June 22, 2003, 10:10:00 PM
w:0000-0013
x:0000-000D
y:00C2-0002
z:0000-0000
I'm located in France. Am I banned ?
My xbox is modded with a Matrix and I just reinstalled the original hdd to try the xboxlive.
Post by: Fuzzy on June 25, 2003, 04:31:00 PM
| QUOTE (MaNoLo75 @ Jun 23 2003, 02:10 AM) |
| I can't connect to xboxlive, here are my codes : w:0000-0013 x:0000-000D y:00C2-0002 z:0000-0000 I'm located in France. Am I banned ? My xbox is modded with a Matrix and I just reinstalled the original hdd to try the xboxlive. |
Ive seen this code before, im still not sure what it means but it looks alot like banned from past experience. Switch up your eeprom, come back, and tell me if it worked. (More c codes please, they remain a mystery Please if you have any info as to what the c code might be [y:00C2 0002] tell me. Especially if you got reconnected with out switching eeproms)
Post by: lili on July 02, 2003, 11:11:00 PM
| QUOTE (Fuzzy @ Jun 26 2003, 09:31 AM) | ||
Ive seen this code before, im still not sure what it means but it looks alot like banned from past experience. Switch up your eeprom, come back, and tell me if it worked. (More c codes please, they remain a mystery Please if you have any info as to what the c code might be [y:00C2 0002] tell me. Especially if you got reconnected with out switching eeproms) |
When I modifiled eeprom with maybe invalied OnlineKey and MAC address,
1st Y code shows 00C2.
I'm thinking may appear when checks on XBL reject them.
I switched to my original eeprom, then show below.
Post by: Fuzzy on July 07, 2003, 05:58:00 AM
| QUOTE (lili @ Jul 3 2003, 03:11 AM) | ||||
When I modifiled eeprom with maybe invalied OnlineKey and MAC address, 1st Y code shows 00C2. I'm thinking may appear when checks on XBL reject them. I switched to my original eeprom, then show below. |
hmm, cool
Post by: lili on July 08, 2003, 06:32:00 AM
| QUOTE (Fuzzy @ Jul 7 2003, 10:58 PM) | ||||||
hmm, cool |
After last post, I tried some.
I wrote disk.bin for my gamer's tag.
then 1st Y code shows 00A8 when I wrote invalid code in EEPROM.
This means maybe my post was wrong.
If somebody can try, please post.
// I wanna get a unbanned eeprom.... If you can send it to me, PM plz.
Post by: MadEx on July 08, 2003, 10:11:00 AM
0000 - F001
00A8 - 6840
8015 - 190D
If anyone has a unbanned EPPROM their not using, please send it this way.
Post by: Fuzzy on July 11, 2003, 05:45:00 PM
| QUOTE (MadEx @ Jul 8 2003, 02:11 PM) |
| Apparently I'm banned... 0000 - F001 00A8 - 6840 8015 - 190D If anyone has a unbanned EPPROM their not using, please send it this way. |
dude, since you already have a banned eeprom do me a favor. Screw up your eeprom in config magic and tell me what your xyz codes are please.
Post by: Fuzzy on July 11, 2003, 05:46:00 PM
| QUOTE (Timmymna @ Jun 17 2003, 01:25 PM) |
| x 0001 - 8005 y 00a8 - 4800 z 0000 - 0000 Banned? |
no
Post by: * illusion * on July 29, 2003, 03:21:00 PM
W: 0000-000B
X: 0001-8005
Y: 00A8-6800
Z: 8015-190D
Why am I the only one with a W?
Post by: ElementXP on August 03, 2003, 10:03:00 PM
this is what my screen gives me
1.00.5335.01
w: 0000 - 0015
x: 0000 - F001
y:00A8 - 6820
z: 8015 - 190D
how can i get my live to work again, i called there hotline and he said i wasn't banned and he believed me that i hadn't modded my xbox
oh and the error i get is everything is connecting but the last one, says xbox cannot connect to xbox live becasue he it "may" have software or hardware modifications or some shit like that.
i also think i would have a backup of the eeprom from my old harddrive if that is where its from and not the xbox mainboard or something like that.
can some please tell me if im banned or not and how to get this bitch to work, im pretty poor so i can't get another xbox and aswell i can't send my xbox to them for repairs as ITS IN A F**KING COMPUTER TOWER!!!!
thx
Post by: SLuSHIE on August 04, 2003, 08:59:00 AM
1.00.5335.01
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 4860
Z: 0000 - 0000
please someone help....is anyone selling an eeprom and can lead me threw how to replace it? damn, i would really appreciate it, and will never forget a favour. im also on irc, on efnet (#xbox, dvd, gamecube, ps2, etc) an op, and i can be trusted if doing business with you.
well the next day, i got the error = "cannot connect to live because might be modified etc" now, how do i find out my X,Y,Z values? i press Y and nothing happens.....and also, how do i obtain an unbanned eeprom from another xbox? (i might be able to get one not for sure tho depends how its done) please someone help. i appreciate all of your help, and your time. thank you. take care
SLuSHIE
Post by: SLuSHIE on August 04, 2003, 09:03:00 AM
Post by: AkumAPRIME on August 06, 2003, 01:14:00 PM
X:8000-0011
Y:0000-0000
Z:0000-0000
I thought for sure I was banned, but after reading your thread and seeing no six in my numbers.... Maybe I'm NOT banned!!! woo hoo... Ill have to check. Ill get a live game tonight and test, re post
Not sure if you still check this thread. Hope you do!
ehb
Post by: SLuSHIE on August 10, 2003, 09:59:00 PM
Post by: bigben04 on August 11, 2003, 02:54:00 AM
Hi,
I hope you can help me out here, any help is appreciated. I was pretty sure that I never went online with my modchip on (I use the PC-Bioxx chip), but every game gives me the message "can't connect ... blah ... your software or hardware may have been modified" so I probably made a mistake once.
If I screw up the DNS settings so it can't connect I get the following codes:
w 0000-000b
x 0001-0005
y 0000-0000
z 0000-0000
When I restore them and press Y just before the screen with the error message, I get the following codes:
w 0000-000b
x 0000-000d
y 00a8-6800
z 8015-190d
This probably means I'm banned but I want to be sure about it.
Post by: SLuSHIE on August 11, 2003, 07:57:00 AM
Post by: Soulja545 on August 11, 2003, 04:26:00 PM
hey guys i got xbox live a couple days ago and i got a switch to go on xbox live, when i try to connect thorugh my router i get the codes that go like this:, i also get a way, this is the first time for me.. the code is:
W: 0000-000B
X:0000-F001
Y:00C2-0022
Z: 0000-0000
my UL and DL are also O kb, any help would be greatly appreciated, am i banned? im 100% i didnt use mod while connecting, i wasnt even connected to the service yet! any help on what these codes mean? thanks..
Post by: hansiu on August 14, 2003, 05:49:00 AM
X: 0000 - 000B
Y: 00C2 - 03E0
Z: 0000 - 0000
When i use my old eeprom the xbox connects with live, but i get the hardware mod error, the also indicates banned.
Post by: sck on August 14, 2003, 10:34:00 AM
My codes are as follows:
X: 0000-F001
Y: 0088-1C60
Z: 0000-0000
Is this banned or not? Also, what's the proper way to reflash the original eeprom in configmagic? I unlocked the hd, hit update eeprom, then relocked the drive.
Post by: sck on August 14, 2003, 11:15:00 AM
At 12:01 a.m. PDT, we will perform routine server maintenance to keep the service running as smoothly as possible. Despite a lot of speculation in online forums and in the press, the upgrade will begin and end on August 14.
heh, guess i'll check back tomorrow
Post by: bho76 on August 18, 2003, 09:13:00 AM
x- 0000-f001
y- 00c2-0062
Post by: bho76 on August 18, 2003, 09:15:00 AM
again
x-0000-f001
y- 00c2-0062
z- 0000-0000
does this mean i am banned?? i can't connect at all...
Post by: Pr0ph3t on August 29, 2003, 12:57:00 PM
Y: 0000 - 0000
Z: 0000 - 0000
Banned?
Post by: fewl` on August 30, 2003, 04:08:00 PM
| QUOTE (Pr0ph3t @ Aug 29 2003, 09:57 PM) |
| X: 8000 - 0011 Y: 0000 - 0000 Z: 0000 - 0000 Banned? |
Yes your banned, I got the same thing like yours
Cheers mate!
Post by: Magiske on August 31, 2003, 05:30:00 AM
X: 0000 - f001
Y: 00c2 - 01e4 (seen that before)
Z: 8015 -1917
Post by: Fog Dogg on September 01, 2003, 03:12:00 PM
X:0000 - F001
Y:00A8 - 4840
Z:0000 - 0000
I am unbaned, using the audio dashboard exploit.
Post by: t0mmyr on September 07, 2003, 01:41:00 PM
i think i have an xecutor 2lite installed
my codes as followed:
1.00.492.0.1
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 1917
how can i revert the 6860 back to 4860? won't that fix it?, i also have a RAR of a second xbox i purchased for a friend using a new 10gb seagate HD (it was v1.3xbox), that xbox doesnt use xboxlive, can i just copy those HD contents over, or are these numbered stored somewhere on the hardware on my xbox...?? can we reflash the xbox if so?
Post by: bloodfist on September 09, 2003, 06:28:00 PM
X: 0000-F001
Y: 00AB-4840
Z: 0000-0000
Post by: Dregan on September 10, 2003, 11:31:00 PM
W: 0000-000B
X: 0001-8005
Y: 00A8-4800
Z: 0000-0000
Post by: Airwolf[UKR] on September 11, 2003, 06:49:00 AM
W: 0000-000B
X: 0000-F001
Y: 00C2-0022
Z: 0000-0000
are they any good???
Post by: Airwolf[UKR] on September 11, 2003, 11:38:00 AM
Post by: Gamer on September 11, 2003, 02:56:00 PM
Questions and Answers
Q. OK, I understand that my connection to the Internet can have different speeds in each direction. How can I find out how fast my connection is?
A. Simple! Turn on your Xbox without a game disc in it. When you get to the main menu, select the Xbox Live option. Select the Network Setup entry, and then select the Connect option at the bottom. When the Xbox is done checking the connection (successful or not), press Y on your Xbox controller. At the bottom of the window that appears youll see a UL: entry and a DL: entry with a number following each. The UL is your upload speed, or the upstream pipe to the Internet. The DL is your download speed. Both numbers are in kilobits per second.
Q. What do the other numbers on the screen mean?
A. The first codes are just diagnostic codes the Xbox Live team uses. Skip those, and drop down to the L: entry.
The L: entry is latency, or the average lag your Xbox is seeing when connecting to Xbox Live. Bear in mind that the number you see here is measuring the speed of the connection from your Xbox to one of the Xbox datacenters on the West Coast of the U.S.A. If you're connecting from Europe, Japan, or elsewhere in the world, this number is likely to be pretty high. Dont worry, thoughyour game always knows where to find the closest game host or datacenter.
The P: entry is ping, a network term for a test that sends test packets to a location and sees how many get through. A high number (such as 20 of 20) is good; this means that your connection to Xbox Live is good. Dont worry if a few packets get lostthats common. (Remember how the freeway changes suddenly?)
One thing to note is that the latency and ping numbers refer only to your connection to Xbox Live. Your connection to other gamers Xbox consoles could be very different. Good numbers here dont necessarily guarantee a good game with other people, but they help. At least you know that your overall connection to the Internet is working, and that the Xbox Live data being sent to/from your Xbox is being sent reliably.
Post by: psibob84 on September 11, 2003, 04:04:00 PM
X2 pro upgraded 80 gig hd locked with evox x etc loaded onto f drive (eg virgin c and e drives)
xbox going through pc which goes through a router to the internet
X:0000-000D
Y:00A8-4800
Z:0000-0000
Post by: The DareDevil on September 12, 2003, 08:28:00 PM
w: 0000 - 000B
x: 0000 - 000D
y: 00A8 - 6800
z: 8015 - 190D
When you're banned, MS will not renew your subscription, right?
Edit: I blame MotoGP2 for my bannage
Post by: curse_007 on September 13, 2003, 06:09:00 AM
x: 0000 - 000D
y: 00A8 - 6800
z: 8015 - 190D
I was also banned...had my X2.2lite plus on and it auto connected....
oh well...
Post by: -
w:0000-0000
x:8000-0011
y:0000-0000
z:0000-0000
Post by: chevrix on September 15, 2003, 08:51:00 AM
Now I upgraded to live 2.0 my wxyz codes are all zero's.
So if I could connect, you probably also can.
Maybe because we do not have an account yet there are so much zero's in...
Post by: Gamer on September 15, 2003, 09:57:00 AM
| QUOTE (-<Slayer>- @ Sep 15 2003, 06:47 PM) |
| I was wondering if I can go on xbox live with this w:0000-0000 x:8000-0011 y:0000-0000 z:0000-0000 |
Thats showing that you have not connected to XBLive
Post by: -
Post by: -
This post has been edited by -<Slayer>-: Sep 15 2003, 07:11 PM
Post by: -
W:0000-0015
X:0000-F001
Y:00A8-4860
Z:0000-0000
Post by: Gamer on September 15, 2003, 12:20:00 PM
| QUOTE (-<Slayer>- @ Sep 15 2003, 10:10 PM) |
| W:0000-0015 X:0000-F001 Y:00A8-4860 Z:0000-0000 |
Yeah, that's better. 4860 means not banned, and auto settings were used to connect. All is good with that. Thats 100% normal
Post by: -
Post by: shanafan on September 15, 2003, 12:55:00 PM
Post by: mrhahn on September 15, 2003, 02:07:00 PM
x = 0000-f001
y = 00a8-6860
z = 8015-190d
Post by: ThaLikz on September 16, 2003, 06:12:00 AM
I did something very stupid
i wanted to play ghost recon so when i was in the menu i needed to make an new account zo i pressed the button to make one suddently it went to the ms dash and there was an menu wich said somethin like thisyou are about to subscirbe to xbox live
blablabla
zo you needed to press contineu i dindn't do it when i saw this i pressed imediatly my xbox off.
(by the way at the moment of this i had already xbox live 2.0 and auto connect on)
These are my codes
w:0000-000B
x: 0000-000D
y: 00A8-4800
z: 0000-0000
Post by: zipdoa on September 16, 2003, 03:19:00 PM
my stuff looks as follows:
1.00.5659.01
W:0000 - 000B
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 190D
Post by: Airwolf[UKR] on September 20, 2003, 06:43:00 AM
Post by: Spency234 on September 20, 2003, 08:35:00 AM
W: 0000-000B
X: 0000-F001
Y: 008A-0FC0
Z: AFFF-0018
Post by: Airwolf[UKR] on September 20, 2003, 10:34:00 AM
X:0000-F001
Y:00C2-0022
Z:0000-0000
but after i turned off the modchip i had the following codes:
X:0000-F001
Y:00A8-4860
Z:0000-0000
The only thing i know is that C1/C2 or C3 in your Y code means that you have the xbox live not found error.
good luck to ya all!
Post by: dummie on September 21, 2003, 02:51:00 AM
| QUOTE (Airwolf[UKR] @ Sep 20 2003, 07:34 PM) |
| My xbox live problems are solved now... i had the modchip on the first time and didnt get booted, instead i got XBOX live NOT FOUND error. I had these codes back then: X:0000-F001 Y:00C2-0022 Z:0000-0000 but after i turned off the modchip i had the following codes: X:0000-F001 Y:00A8-4860 Z:0000-0000 The only thing i know is that C1/C2 or C3 in your Y code means that you have the xbox live not found error. good luck to ya all! |
i have the same xbox not found problem am i banned?
X-0001-8005
Y-00C2-0380
Z-0000-0000
hope im not my chip is messed up and i have nothing eles to play that's real. except one.
Post by: dummie on September 21, 2003, 02:52:00 AM
Post by: dummie on September 21, 2003, 04:23:00 AM
Post by: Airwolf[UKR] on September 21, 2003, 04:31:00 AM
Post by: Lost Dream on September 23, 2003, 03:39:00 PM
X 0000 - F001
Y 00A8 - 4860
Z 0000 - 0000
Am I banned. If not, does this mean you can play us discs on a pal machine withn the chip switched off?
Post by: mpage on September 23, 2003, 05:25:00 PM
x: 0000-F001
y: 00C2-0062
z: 0000-0000
The error in network troubleshooter is that XBlive could not be found. The S/N at the top of the troubleshooter is blank, although there is one displayed in config magic.
Post by: ocat on October 04, 2003, 04:44:00 AM
| QUOTE (Lost Dream @ Sep 23 2003, 11:39 PM) |
| I went online tonight with my chipp switched off, but my eprom left on NTSC, these are my settings X 0000 - F001 Y 00A8 - 4860 Z 0000 - 0000 Am I banned. If not, does this mean you can play us discs on a pal machine withn the chip switched off? |
Excellent question. I have a PAL box and a heap of NTSC games, but no switch on my chip (soon to install one). That would be great if that worked!
As for you been banned, by the the looks of your Y00A8 - 4860, then no, you're not banned.
Post by: Fuzzy on October 15, 2003, 06:08:00 PM
Instead of asking them, ill gather some developers and well work out a program. Remember, I STILL NEED WXYZ CODES AND INFO. Specifically location, banned status, connection speed, location in us if applicable, and other things you find important. It cant be done without the people!
Post by: mrRobinson on October 15, 2003, 07:19:00 PM
EDIT: oh you said, "Now that im back..." but where did you go?
Post by: yrga on October 16, 2003, 02:22:00 PM
Cheers!
Post by: Fuzzy on October 16, 2003, 02:57:00 PM
| QUOTE (yrga @ Oct 16 2003, 06:22 PM) |
| I've been browsing through all your posts since the beginning, and only thing I can think off to help out guys banned (other than getting a new eeprom), is to buy a new Xbox just for live once the price drops to $99, likely to happen after Christmas season. If the "Holiday Bundle" remains after the season, you will get Live along with the Xbox.. souds great to me and avoids a lot of headaches! Cheers! |
If you really read this whole thread youd know it has nothing to do with getting unbanned
Post by: shanafan on October 17, 2003, 12:35:00 PM
| QUOTE (scorpion303 @ Oct 16 2003, 07:35 AM) | ||
I do too! |
MotoGP 2 is a Live Aware game. Check the pinned topic about Live Aware games.
Post by: mrRobinson on October 17, 2003, 12:35:00 PM
Post by: MasterMind on October 17, 2003, 07:11:00 PM
X 0600-F001
Y 00A8-6860
Z 8015-190D
W 0000-000B
BANNED !!!!!!!!!!
Damn auto login got me..
This is taken with the line on plugged in but mod not enabled. Its running through a wireless router A SMC 2408 80211 G router. Firewall is on but ports are open I still inspect packets on way out and in. I changed the XD serial number and rom ser # and still no unban ?? .. Maby it will help ya. I called ms explained that I got box refurb from gamespo# and was fine up tell they installed the live 2 upgrade. then it gave me MSG.. I s/w manager there and was told that in 1-2 weeks I should be able to get on-line and play ?? WTF is this about?? The CSR I s/w said that there have been a few calls in the last cpl of days where there is no mod chip and they were banned ? Perhaps there is a flaw in the system after all. Ill be happy to post if I was actually unbanned or not.. L8trz
Post by: Fuzzy on October 19, 2003, 04:40:00 PM
Post by: Fuzzy on October 20, 2003, 05:27:00 PM
Post by: ...ranma on October 21, 2003, 02:13:00 PM
W:0000-000B
X:0000-000D
Y:00A8-4800
Z:0000-0000
NOT BANNED.
Incidently, I have a copy of the EEPROM from my old xbox with an X1 in it that I sold to a friend that'll never be going on Live (I removed the live option from his MS dash and replaced it with a link back to EVOX)... So I've got an extra eeprom.bin file in case I get FSCKed.
Post by: MasterMind on October 21, 2003, 05:45:00 PM
Post by: Fuzzy on October 21, 2003, 06:03:00 PM
| QUOTE (MasterMind @ Oct 21 2003, 09:45 PM) |
| ok cant you just change the serial number in the eprom and on the HD with config magic and log in. They ban by the ser # dont they ? if thats the case goto your local store copy the ser# and wala.. ?? hell I am probably wrong and just wishfull thinking. by the way anyone want to part with a non baned prom |
Random serial numbers dont work and the serial at the store is tightly sealed in the package in a cd case under that scratch off stuff.
Post by: ...ranma on October 22, 2003, 04:01:00 AM
Don't think changing your live # would work anyway... As the live # is tagged (?) to your live account and as far as we know, MS doesn't ban your account, just your xbox.
Post by: mrRobinson on October 22, 2003, 07:29:00 AM
Post by: Fuzzy on October 22, 2003, 11:07:00 AM
| QUOTE (mrRobinson @ Oct 22 2003, 11:29 AM) |
| yes. they only ban your eeprom right now, not your live account. |
I wonder why they never thought to do that...maybe someone should actually read the terms liscense agreement thing.
Post by: mrRobinson on October 22, 2003, 01:08:00 PM
Post by: ldjones48 on October 23, 2003, 12:44:00 AM
Post by: Fuzzy on October 23, 2003, 10:39:00 AM
| QUOTE (ldjones48 @ Oct 23 2003, 04:44 AM) |
| Ok looks like i wil have to buy a new XBOX |
Just find a not banned eeprom and flash it
as for the not banning accounts i just realized, if you buy a prebanned box they dont what your account to get banned.
Post by: Cretin on October 23, 2003, 06:59:00 PM
banned
X:0000-F001
Y:00A8-6860
Z:8015-190D
Post by: Fuzzy on October 24, 2003, 07:40:00 AM
| QUOTE (Cretin @ Oct 23 2003, 10:59 PM) |
| modded xbox banned X:0000-F001 Y:00A8-6860 Z:8015-190D |
w code? (and location)
Post by: yrga on October 24, 2003, 12:27:00 PM
| QUOTE (Fuzzy @ Oct 23 2003, 07:39 PM) | ||
Just find a not banned eeprom and flash it as for the not banning accounts i just realized, if you buy a prebanned box they dont what your account to get banned. |
And I ask again.... how likely is for ppl to get a new eeprom file?
It sounds fair to me that eventually must banned ppl will have to buy a new Xbox just for Live (wait for price drops after Christmas
).
Post by: mrRobinson on October 25, 2003, 11:50:00 AM
Post by: Fuzzy on October 26, 2003, 08:21:00 AM
Post by: Fuzzy on October 29, 2003, 03:23:00 PM
| QUOTE (bem69 @ Oct 29 2003, 01:32 PM) |
| Australian Xbox V1.0 Modded with xecuter lite 2.2 Status : Banned or Unbanned? Problem : Xbox Live not detected Cause (I think): I pressed the eject button on XBMP and it brought me to the dashboard with the error saying the media is not compatible with the xbox. The same one you get if you have a scratched disk. I switched it off quickly when I saw the familiar green dash. Probably 2 secs max. XYZ Codes: 1.00.5659.03 W:0000-000B X: 0000-F001 Y:00A8-4860 Z:0000-0000 Reading this thread, it says that my second Y code must start with a 6 to get banned. I hope my xbox live is still working. Damn xbox mediaplayer. Damn! Any thoughts on my situation? Please? |
Well your not banned yet. You might become banned though. If those are your codes, it appears everything should be going smoothly (recieving all packets well and not banned)
Does anyone not have a w code thats just b?
Post by: Fuzzy on October 30, 2003, 10:33:00 AM
| QUOTE (bem69 @ Oct 29 2003, 11:19 PM) | ||||
Well, if I'm not banned yet, its weird that now I can't connect at all. At least a confirmation that I'm banned would be better than this. Keeps saying Xbox Live not found on the 4th test. |
Sounds more like a port problem to me or something like that.
Post by: bem69 on November 01, 2003, 04:41:00 AM
| QUOTE (Fuzzy @ Oct 30 2003, 08:33 PM) | ||||||
Sounds more like a port problem to me or something like that. |
You were right Fuzzy. My problem is real weird. Xbox Live goes on and off for me now. The only fix for me is to switch off my router and turn it back on again. That wouldn't be a problem as much, but I have to change the config for XBMP everytime this happens (DHCP IP change), which is a pain in the ass. Used to work flawlessly too. Even put the xbox ip in the DMZ field.
Post by: Fuzzy on November 01, 2003, 10:46:00 AM
| QUOTE (bem69 @ Nov 1 2003, 09:43 AM) | ||
How did you get banned exactly? |
I think he means he forgot it was a backup and tried going on live with it.
Post by: Fuzzy on November 01, 2003, 10:48:00 AM
| QUOTE (bem69 @ Nov 1 2003, 09:41 AM) | ||||||||
You were right Fuzzy. My problem is real weird. Xbox Live goes on and off for me now. The only fix for me is to switch off my router and turn it back on again. That wouldn't be a problem as much, but I have to change the config for XBMP everytime this happens (DHCP IP change), which is a pain in the ass. Used to work flawlessly too. Even put the xbox ip in the DMZ field. |
*sorry for double post needed another named quote*
I feel like i know alot about networks and to me all that means is your xbox isnt being dealt an ip right away so when you cycle your router its picking up the xbox. What brand router is it? You might have to set it to automatically pick up new "clients"
Post by: Fuzzy on November 01, 2003, 12:21:00 PM
| QUOTE (bem69 @ Nov 1 2003, 04:09 PM) | ||
I'm using a Netgear RT314 with firmware 3.26. I'm really not sure bout the IP thing, cause that doesn't seem to be the problem. It randomly gets disconnected while I'm playing on Live. Weird really. I set it to DHCP so that it does pickup new clients. Now, I have no problems ftping the xbox and such, but this Xbox Live thing is just crazy. Note: When I get that problem, Ftping or streaming via relax still works. Just xbox live that's being a bitch |
tres weirdo man (strongbad accent)
Post by: Fuzzy on November 01, 2003, 05:42:00 PM
| QUOTE (Ranger_5 @ Nov 1 2003, 05:58 PM) |
| Mine seems odd Ok its a modded Xbox, Banned and i cann't get the DNS server to connect, everything is auto and i put in my MAC and sn W 0000-000B X 0000-F021 Y 008C-0060 Z 0000-2AF9 Hmmm |
Thats one of those strange codes i cant figure out because a bunch of people have them but we cant be sure if they are banned or if its a network problem. How do you know your banned? Does it stop at Ip, Dns, the other one, or Connection to xbox live?
Post by: Fuzzy on November 01, 2003, 06:00:00 PM
| QUOTE (Ranger_5 @ Nov 1 2003, 10:57 PM) |
| Well, it stops at DSN, but before i ACTUALLY could get online and it would say that there was diffivulty and to contact MS and stuff(i was banned) but like now it stops at DNS |
oh. well try getting around that (fix your router settings) then report back (its very important you can finally get the info known!)
Post by: uzi rider on November 02, 2003, 10:21:00 AM
Post by: Edge_3 on November 06, 2003, 07:36:00 AM
W 0000 - 000B
X 0000 - 000D
Y 008C - 0000
Z 0000 - 274C
I can't connect.... Been messing with the settings, and before it said XBox Live not found.
Banned? Shouldn't have thought so. I've done nothing to get me banned. Always been Uber careful.
Post by: Edge_3 on November 06, 2003, 07:38:00 AM
W 0000 - 000B
X 0001 - 8005
Y 0088 - 1C00
Z 0000 - 0000
Any ideas?
Post by: Fuzzy on November 06, 2003, 11:29:00 AM
| QUOTE (Cutriss @ Nov 2 2003, 02:26 AM) | ||||
I thought those codes were C1/C2/C3, not 8C. At any rate, process of elimination says that 8 is providing the same bit that C is having a problem with - These are binary flags, after all. Here's the Y line: 0000 0000 1000 1100 - 0000 0000 0110 0000 For a C1/C2/C3 line, the first half goes like this: 0000 0000 1100 0001 0000 0000 1100 0010 0000 0000 1100 0011 Fuzzy, for this to be most useful, you should break it down to the individual bits. A "6" in the 5th column of Y as opposed to a "4" doesn't mean anything. It's the specific bit that's flipped: ---- ---- ---- ---- - 0100 1000 0110 0000 <--- xxxx-4860 ---- ---- ---- ---- - 0110 1000 0110 0000 <--- xxxx-6860 What I'm getting at is that if this bit is MS_XBOXLIVE_BANNAGE, then a 6 is bannage, as would be a 2, 3, 7, A, B, E, and F. |
Extremely interesting! Good work! Would you be interested in helping if i do a quick prog to analyze your xyz codes? Im not a programmer im more of a hardware guy so i need some people who know what they're doing. If your a programmer or just interested in working with me on decoding some crap contact me via pm.
Post by: Edge_3 on November 06, 2003, 02:27:00 PM
Quick update. I rang them up, I'm not banned. The service was down, even though it said it wasnt on the web site. On live now.
Post by: RideBurton164 on November 07, 2003, 06:35:00 PM
W: 0000-000B
X: 0000-F001
Y: 00C2-0022
Z: 0000-0000
or with mac address entered
W: 0000-000B
X: 0000-F021
Y: 00C2-0022
Z: 0000-0000
Thanks for any help guys...
I had wires still installed from an x2 lite that was removed...took those out didnt do anything(as i didnt think it would...)
Post by: Fuzzy on November 07, 2003, 09:27:00 PM
| QUOTE (Cutriss @ Nov 8 2003, 12:26 AM) | ||
This is interesting. Other people with the "6" banned code actually get a message stating that they're operating modified equipment. The people with the C1/C2/C3 codes don't get that message. They just get a "can't find Xbox Live" error. Not sure why MS would provide some people one banned code and others the other. I think this must be another sort of network error. If someone out there has a C1/C2/C3 box and is competent with a router, do us a favor and do some logging on your connection attempt. See if you can ping the addresses that your Xbox is trying to access. Or, just take a log, send it to me, and I'll see what's what. Also, list your ISP (and whereabouts you live). |
I just get this feeling the c1/c2/c3 has something to do with certian things not matching up like the eeprom data. A lot of people who switch parts around and their eeprom get these codes.
Post by: RideBurton164 on November 07, 2003, 09:33:00 PM
Post by: RideBurton164 on November 08, 2003, 06:13:00 AM
Post by: MikeHolliday on November 08, 2003, 10:34:00 AM
I had been playing Crimson Skies without updating the dashboard (unless it did it without letting me know but nothing seems to have changed so i dont think it ever updated) and all of a sudden last night when i tried to play (three or four days after the rainbow 6 incident) Crimson Skies with mod chip off like i always do it goes to some menu and says i have modified hardware. I guess i'm banned?
W:0000-0008
X:0000-F001
Y:00A8-6860
Z:8015-1900
Post by: RideBurton164 on November 08, 2003, 07:47:00 PM
as far as your beta issue man...from what ive read, i understand it that beta users who used chips on live during beta, got banned as soon as the installed retail even if they didnt use the chip on retail...but thats just my understanding
Post by: Cutriss on November 10, 2003, 10:43:00 AM
For now, I can at least disclose the following details:
Having your Live account on an MC or the HD makes no difference.
Setting your connection to 10BaseT or 100BaseTX makes no difference. Your transmission flow settings (Half-duplex / Full-duplex) *will* adjust the W values. I don't know offhand if the Xbox hardware supports Gig-E, and the only place I have access to 1000BaseTX is on our Cisco routers at work, which are heavily monitored, and I don't have a Mac, so I can't check to see if Gigabit Ethernet gives a different value of W. If someone else could check this, that'd be good. Someone way back posted a W: value of 0013, and I don't know what generated that.
Playing around with my connection settings actually gave me a few new values of X:, and I didn't even touch the MAC/PPPoE/Wireless settings.
Post by: Cutriss on November 10, 2003, 10:57:00 AM
The error code doesn't distinguish the reason the DNS server was unreachable (eg - connection rejected/denied from machine). I tried setting it to the Xbox itself, my gateway (which wasn't serving DNS), another IP within the same subnet (where no machine existed), and an IP outside the subnet. All four returned the same error code.
So, Ranger 5 may be banned (he said as much), but his problem now is the network and nothing else.
Post by: Fuzzy on November 10, 2003, 02:31:00 PM
Post by: Fuzzy on November 14, 2003, 05:20:00 PM
| QUOTE (Devlin @ Nov 13 2003, 02:51 AM) |
| Hopefully, you've laid my mind to rest, I connected (for the first time since Beta) to Xbox Live with my mod-chip enabled using Top Spin, while I was connecting it was taking an age to log into Live so looked down, realised I'd been using DVDX the night before and quickly switched off my Xbox while it was still logging in (must've been 15-20 seconds logging in). I've checked my codes and here are the results: using an Ethernet Router, all settings on automatic I live in England. X: 0000 - F001 Y: 00A8 - 4840 Z: 0000 - 0000 Does that mean I'm safe or will it change later on? *Edit* I forgot to say I have been on Live after that, I realise sometimes it takes a while to get banned but wouldn't my Y code change as soon as it was detected? |
It could change later on because the live system takes a bit to register everything. The codes are based on responses from the server. If your not recieving the trashed response, it wont say it.
Post by: akula169 on November 17, 2003, 09:01:00 PM
Here's my problem - I've got two xboxes - one connects, one doesn't - same network - same config - DHCP on my router. Live 2.0 was installed on both - auto-connect was disabled right after I upgraded to 2.0.
The one that isn't working:
It wants to troubleshoot immediately. Upon troubleshooting, it gets an IP, resolves DNS and then immediately hits "Live not found" and pops up this message:
"Your Xbox console cannot communicate with Xbox Live because of technical configuration issues. Please call the Customer Care number listed in your Xbox Instruction Manual for more information."
Here's the XYZ
W: 0000-000B
X: 0000-F001
Y: 00C2-01E4
Z: AFFF-0018
Now, after reading all these posts, I figured something might be up with my EEPROM, since the video mode was changed when I was messing with XBMC. I used a copy of the original EEPROM (from evox backup) to re-do the EEPROM with ConfigMagic - unlocked drive, rewrote EEPROM, Loaded EEPROM, Locked drive. No difference. Still can't find Live.
I'm thinking I'll try swapping the EEPROMS between the two boxes to see if it makes a difference. But that will have to wait until I have more time tomorrow.
Just for kicks, here's the XYZ from the working box:
X: 0000-F001
Y: 00AB-4860
Z: 0000-0000
I'll report my findings on the EEPROM swap tomorrow.
** added info **
Oh - I guess I should mention that I've also recently upgraded my drive from a 120G to a 250G - noticed another post talking about this. However, it is locked - and only a partition 6 - no G drive. Just saw another post talking about this. This may be the root of the problem and caused it stop working, but I haven't tried Live in a couple months, so I don't know if it was working before the drive upgrade.
I'll also swap the drive back to the 120G and see if that does anything as well.
Post by: Cutriss on November 18, 2003, 05:01:00 PM
The C2/AFFF code means there's an incongruity between your hardware and your EEPROM data, meaning you may not have locked the drive properly, or something else may be afoot. We haven't managed to get to the bottom of this issue entirely, but every single person I've seen here with a C2 said that the problem went away when they reflashed their EEPROM, or got a new one.
Post by: Fuzzy on November 18, 2003, 05:47:00 PM
| QUOTE (Cutriss @ Nov 18 2003, 10:01 PM) |
| No, it's not confirmed at all. Other people have 250GB Xboxes on Live and haven't had a problem. The C2/AFFF code means there's an incongruity between your hardware and your EEPROM data, meaning you may not have locked the drive properly, or something else may be afoot. We haven't managed to get to the bottom of this issue entirely, but every single person I've seen here with a C2 said that the problem went away when they reflashed their EEPROM, or got a new one. |
Skilled work my friend, as for the c2 problem i had recommended before that people reflash and it worked (if you feel im stealing your glory man you can go back and see that i have) but as for the definite answer that the incongruity is there...well...if there were a hats off to you smiley, id be using it here
Post by: akula169 on November 18, 2003, 07:58:00 PM
| QUOTE (Cutriss @ Nov 18 2003, 07:01 PM) |
| No, it's not confirmed at all. Other people have 250GB Xboxes on Live and haven't had a problem. The C2/AFFF code means there's an incongruity between your hardware and your EEPROM data, meaning you may not have locked the drive properly, or something else may be afoot. We haven't managed to get to the bottom of this issue entirely, but every single person I've seen here with a C2 said that the problem went away when they reflashed their EEPROM, or got a new one. |
So, are you trying to say that ConfigMagic does not properly support drive locking for 250g drives? It certainly works well enough to get past the boot checks...
Why is it that my the EEPROM I have installed is working fine with a 120, but not with my 250?
I'll try swapping EEPROMS from my other box, but I seriously doubt that it will solve my problem - unless there is something with the box version (1.0, 1.1, etc) that allows ppl to use 137g+ drives on XBL without problems.
I understand you might not have the answers, but I'm just going by the obvious logic here. I don't see a need to go out and get another EEPROM if that really isn't my problem. It looks to be that the system is not happy with *something* that the 250g is saying to the system.
My 250g is a WD2500 - perhaps the other people that have gotten XBL to work have a different model?
Let's try to use my data to help figure out what's wrong here, instead of simply trying to shoot me down and move on...
Post by: CZECH on November 18, 2003, 08:49:00 PM
The 250 shows as locked in both ConfigMagic and my Evox settings
X:0000-F001
Y:00C2-01E4
Z:AFFF-0018
I took my intire C drive from my 120g HDD and loaded it to my 250g HDD w/G drive and I get "Xbox Live Not Found".. When I hook up the 120 everything is cool but when I put the 250 in with the SAME C drive I get the message...The only thing different is the added G drive on the 250 ...Also tried it with a large F with the same results
Post by: Cutriss on November 19, 2003, 05:54:00 AM
Read back through the thread - The error codes you guys are getting have been widely stated (as Fuzzy points out), and in all the cases where people have pursued it further, changing the EEPROM fixed the problem. People have gotten C2/AFFF on lower-capacity drives than 250. I think someone even got it with a 40 GB disk, IIRC.
I'm not bagging on the ConfigMagic folks either, but from what I've seen, it's not as foolproof as using ATAPWD and such to lock a drive. Try plugging your old 120 in, do an EvoX backup, and use HDDUnlock/ATAPWD/Ghost to lock the new one.
If I had a bigass drive like that myself, I'd do it, but I just bought a 120 four months ago, and I'm hoping to get a DVD+R over Christmas, so no new HDs for me anytime soon...
Post by: CZECH on November 19, 2003, 04:47:00 PM
| QUOTE |
| HDDUnlock/ATAPWD/Ghost to lock the new one. |
Where can I get a guide to help me try this...I have Windows XP
Post by: Fuzzy on November 19, 2003, 05:50:00 PM
Post by: CZECH on November 20, 2003, 11:24:00 PM
Post by: Cutriss on November 21, 2003, 12:55:00 PM
| QUOTE (CZECH @ Nov 21 2003, 09:24 AM) |
| Bro I have been searching...I cant find UnlockHDD....The only thing on xbins is the SourceCode |
Are you looking for UnlockHDD or HDDUnlock? Make sure you're looking for the latter, and not the former. And I think it's hosted on this site too, BTW.
I just checked, and indeed it is, as are quite a few of the apps mentioned in that howto. Look in the Tools section.
Post by: CZECH on November 21, 2003, 10:47:00 PM
Post by: Fuzzy on November 22, 2003, 06:24:00 AM
Post by: Cutriss on November 23, 2003, 07:19:00 AM
Post by: Cutriss on November 23, 2003, 12:16:00 PM
What problems are you having with DOS?
It's not that we want you to stress over this, but if we can confirm this problem, then we'll have a good idea about why everyone else is getting a C2/AFFF error message.
Post by: Fuzzy on November 26, 2002, 08:08:00 PM
This is a re-post of my discoveries as a seperate topic.
Ok, ive looked through a lot and here's how its working.
NEW: W Update: The W code changes depending on your "flow" rate half duplex or full duplex. (Special thanks to Cutriss)
X. First of all, the first four numbers of x should always be zeros. They SHOULD always but I haven't seen one that isn't. If it isn't that is most likely not a problem
Y. 00A8 seems to be common among banned and not banned boxes. Now here is where the problem is. Apparently 6860 indicates an LPC mod that is enabled or a non switched non-LPC mod enabled. 6820 means that the system had once had a modchip in it but at the moment is not running. Other wise it should be something like 4840 or 4820.
NEW INFO:
00C2 In your second Y code is almost definitely an unconformity in Eeprom info. This is caused by either editing the eeprom so that parts do not match, or other types of unmatching data (can be caused by replacing parts in the xbox or locking and unlock attempting with different things.) New Info! (Not Confirmed)
| QUOTE |
| I had the 00C2 code and got the "XBox Live not found" error, however when I prepared my HD using the "long" version of locking (involving using a PC and Norton Ghost to clone the original xbox drive, then using LiveInfo and atalock to lock the HD), the 00C2 code went away, and I have been playing on Live happily ever since (for about 2 weeks now). All these people that have purchased new EEPROMs probably didn't need to. There's another post somewhere in this thread that mentions using the PAL<->NTSC video mode switcher may also alleviate the 00C2 problem. |
00C2 (Almost Definitely) FINAL INFO:
By Cutriss
It is my guess (and much of the user-posted evidence supports this) that when people are using ConfigMagic to lock their HDs, they are either doing so incorrectly, or there may be an underlying problem in ConfigMagic.
If your Xbox is banned and you successfully connect to Live, you will always get a message saying that your connection is dropped because of modified hardware or software.
If you simply get the message "Xbox Live not found", then check your XYZ settings. Specifically, we're looking at row Y, the third and fourth characters. If these say "C1", "C2", "C3", or "8A" (NOT A8!), then you have a hardware mismatch problem with your EEPROM. Typically, you'll also see "AFFF" or "0000" in the first half of Z as well. This most frequently arises from people modifying their EEPROM settings so that they can play PAL software on an NTSC Xbox, or vice versa.
harrytasker points out that using the Enigmah PAL-NTSC switcher can possibly restore this:
| QUOTE |
| I had same problem but i FIXED it like this: I ran my avalaunch and looked at my Hardware settings. It said i had PAL-1 or PAL-I whatever and behind it said: WEIRD So i thought let's use the Enigmah PAL-NTSC switcher, so i did and select PAL, rebooted again and checked hardware again. The WEIRD word was gone so i turned off modchip, rebooted and voila i was able to connect again to the XBOX live. Dont know what went wrong but its working again |
If this fails, the best way to fix this problem is to backup everything on your HD and start the HD locking/prepping procedure all over again, using your old EvoX backups (YOU DO HAVE THESE, RIGHT?), and ATAPWD/HDDUNLOCK/LiveInfo. Don't forget to copy your Live account to a memory card. Once you've completed this procedure, copy your Live account back, and try to connect to Live. You should connect successfully.
You do *not* need to replace your EEPROM because of a C1/C2/C3/8A error.
And the moral of the story? Quit mucking around with your region settings.
Z. The last row (a.k.a Z) has to do with packets and trashed responses. The first 4 numbers deal with response on whether is banned, will be banned, or is not banned. The last 4 numbers are a combo. The first two (19 generally) have to do with which live region your in (dont ask) the second two have to do with packet receiving. D is no packets, C is two packets one trashed, 17 is trashed but readable packet. 0000 is any amount of none trashed packets.
A good code should look something like this:
X: 0000-F021
Y: 00A8-4840
Z: 0000-0000
You Cannot Change Your XYZ Codes!
And even if you could it would do nothing!
This is what I have deciphered and I believe it is 99.9% correct. I hope it is of some use to Zander, Opjose, Undead, and others. Thanks for your time
How To Get Your XYZ Info.
ATTENTION, THIS TUTORIAL ASSUMES YOU HAVE ALREADY FULLY INSTALLED XBOX LIVE!
1.Turn off your modchip and go to the Xbox Dashboard.
2.Click on the Xbox Live Tab.
3.Go to Network Connections.
4.Wait for the Green Lights (or red X'es depending on your setup) to load.
5.Once they load highlight the help button.
6.Over the help button press the Y button.
7.An X code a Y code and a Z code will come up along with more packet data including upload and download speed.
8.Take note of these Numbers.
9.Post results in Xyz Code, Uncoded on the Xbox-Scene forums in the Xbox Live section
On another note,
Some people do not get this. I am going to have to say this for everyone who does not listen to a thing me, kickace, or opjose (or undead or etc) says.
Changing your XYZ Codes will do nothing. The XYZ codes are codes that deliver information about your system in data format. They do not relate to anything about being banned, they only tell you if you are or will be banned. People dont understand. CHANGING YOUR XYZ CODES WILL NOT UNBAN YOU EVEN IF YOU FIGURED OUT HOW i hope this helpes opjose and undead answer all the posts about people wanting to change their xyz codes.
Editing Your Eeprom Will Give You A Bad Code And Will Not UnBan You!
-Fuzzy (yes i realize i have typed this before but noone sees it because its in the middle of the xyz post.
Thanks To Shanafan, Cutriss, Opjose, Undead, and all the others who are working to make it easier to not get banned and help if you are!
Post by: Icculus on November 26, 2002, 09:10:00 PM
This post has been edited by Icculus: Nov 27 2002, 05:10 AM
Post by: pride on November 26, 2002, 09:43:00 PM
i edited my eeprom for the fuck of it and put in different values in for serial, online key, mac address & hd key and my X Y & Z are
X: 0000-F001
Y: 00C2-01E4
Z: AFFF-0018
the numbers are checksums brought up from the eeprom somehow but i don't know yet.
Post by: Oger on November 26, 2002, 10:35:00 PM
ill try and fudge with numbers this weekend
Post by: emoney on November 26, 2002, 11:15:00 PM
all settings automatic...
X: 0000 - F001
Y: 00A8 - 4860
Z: 8015 - 1917
dns manually entered...
X: 0000 - F009
Y: 00A8 - 4860
Z: 8015 - 1917
ip and dns manually entered...
X: 0000 - 000D
Y: 00A8 - 4800
Z: 0000 - 0000
mess with the ip address so it can't find ip...
X: 8001 - 0605
Y: 0000 - 0000
Z: 0000 - 0000
mess with dns server so it can't find it (ip manually entered)...
X: 0000 - 000D
Y: 008C - 0000
Z: 0000 - 274C
mess with dns server so it can't find it (ip automaticly found)...
X: 0000 - F009
Y: 008C - 0060
Z: 0000 - 274C
everything automatic, but block necessary ports so live can't be found on router...
X: 0000 - F001
Y: 0088 - 1C60
Z: 8015 - 1917
there ya go.. use this info as you will
Post by: The One on November 27, 2003, 07:51:00 AM
I'm from Amsterdam (The Netherlands) and I have a Chameleon Chip 1.5.
Like many of you, I accidently went online with the chip. Only my problem was that I went online with my old harddisk (I have a 120Gb installed now). So I don't know wether the chip was on or off. And I don't know if the following stats say that I'm banned....
Her are my stats when I press Y
1.00.4920.01
X:0000-F001
Y:00C2-03E0
Z:8015-1917
UL: 0 Kb DL: 0 Kb
L: 0 ms (0 ms) P: 0/0
Post by: Fuzzy on November 27, 2003, 08:30:00 AM
| QUOTE (The One @ Nov 27 2003, 12:51 PM) |
| Wassup Everybody? I'm from Amsterdam (The Netherlands) and I have a Chameleon Chip 1.5. Like many of you, I accidently went online with the chip. Only my problem was that I went online with my old harddisk (I have a 120Gb installed now). So I don't know wether the chip was on or off. And I don't know if the following stats say that I'm banned.... Her are my stats when I press Y 1.00.4920.01 X:0000-F001 Y:00C2-03E0 Z:8015-1917 UL: 0 Kb DL: 0 Kb L: 0 ms (0 ms) P: 0/0 |
Try reflashing the same eeprom your using now and report back.
Post by: camblonie on November 27, 2002, 11:17:00 AM
Post by: Danny-B- on November 28, 2003, 03:11:00 PM
, i just bought rainbow six 3 and tried to log onto xbox live (chip disabled) and got a "Xbox Live Not Found" error modified xbox erroras far as i am aware xbox live hasnt been activated whilst the mod chip has been enabled, could the new games have mod chip detection built in ?
anyway if you still are reviewing codes
V1.0 xbox using a Xecutor 2.2 pro, bios 4979_06 , evox 3921
have played xbox live for at least 6 months with a mod chip inside my box (disabled of course)
Retail Hdd
512k dl 256k up ADSL tiscali ISP internet connection
strange enough i have codes
1.00.5659.03
W:0000 - 000B
X :0000 - F001
Y :00A8 - 6860 <-what a surprise a 6
Z :8015 - 190D
by the way every setting is on Auto
I really dont know how my xbox was detected, all i know is that i started up with rainbow 6 3 in and bang goes my xbox live
Post by: Fuzzy on November 28, 2003, 07:34:00 PM
| QUOTE (The One @ Nov 27 2003, 01:50 PM) |
| Many Thnxz Fuzzy...but.... how do u reflash it? Is there a tutorial for this? I'm very sorry for me not knowing... |
http://xbox-scene.co...prom-change.php Theres one right out of the tuts section, you could have looked. Theres also configmagic 2 which is a great eeprom flasher and all around lock unlock tool.
And sorry danny b your banned, but thanks for the codes.
Post by: Fuzzy on November 27, 2002, 05:55:00 PM
| QUOTE (pride @ Nov 27 2002, 04:43 AM) |
| ok mr fuzzy riddle me this then! i edited my eeprom for the fuck of it and put in different values in for serial, online key, mac address & hd key and my X Y & Z are X: 0000-F001 Y: 00C2-01E4 Z: AFFF-0018 the numbers are checksums brought up from the eeprom somehow but i don't know yet. |
C2 and AFFF mean major difficulty within the system processor. Thats about all i know about those codes right now. Thanks for all your help, im looking into this more.
Post by: Fuzzy on November 27, 2002, 06:50:00 PM
Post by: wildbill on November 29, 2003, 01:12:00 PM
W 0000 - 000B
X 0000 - F001
Y 00C2 - 01A4
Z AFFF - 0018
I have an Xbox Version 1.5 with an DMS X B.I.T. Mod. I know I am not blocked because I was never able to create an account with M$. I keep getting a error saying unable to find Xbox Live. I know all my network settings are correct (they have been checked 100s of times). The only thing I can come up with is that it is my EEPROM. When I installed the Mod and new BIOS=Evox M7 and Evolution 3921. This install was done using Slayers Evox V2.5. I went in to the program Config Majic to check my Mac address and acidently changed my S/N to 01010101010 buy telling it to load from the system or something like that. When I couldn't get it back I manualy input the correct information, but as you can see I am not able to connect to Xbox Live.
Mabe you can help me in recovering from my errors.
Post by: CZECH on November 29, 2003, 01:17:00 PM
Post by: Icculus on November 27, 2002, 09:16:00 PM
0000-F001
00A8-4860
8015-1917
This is the same thing as emoney's original xbox. Therefore 8015 does not equal ban? Cause due to 4860, it should mean that my box is unmodded? hmmm....somethings not right.
Post by: Fuzzy on November 29, 2003, 04:36:00 PM
| QUOTE (CZECH @ Nov 29 2003, 06:17 PM) |
| Cutriss thanx for the offer of help....I am looking for a tutorial that is for Windows XP...I need one that explains what to do in order to LOCK the drive...I dont care about anything else but getting this drive locked...If there is anyone in the Los Angeles area that wants to try it let me know otherwise I would greatly appreciate a step by step |
You want to lock it? Just use configmagic 2 (usual places)
Post by: cbworks2000 on November 29, 2003, 06:35:00 PM
x:8000-0011
y:0000-0000
z:0000-0000
Any Ideas of how I can update?
Post by: Fuzzy on November 30, 2003, 08:59:00 AM
| QUOTE (CZECH @ Nov 30 2003, 06:03 AM) |
| Fuzz please read akula169 and my selves posts...Already locked with ConfigMagic Beta and Final....Shown as locked in Config AND Evox but obviously NOT locked |
Oh sorry, i just had the feeling the problem had been taken care of and this was something new *embarrassed*
Post by: Auslander on November 30, 2003, 11:18:00 AM
| QUOTE (Fuzzy @ Nov 27 2003, 06:30 PM) | ||
Try reflashing the same eeprom your using now and report back. |
having the exact same problem (same XYZ codes) with a 1.0 xbox, using an X2.1 Lite chip.
Tried reloading the eeprom with config magic, didn't help. Codes didn't change.
ANy other suggestions?
Post by: Fuzzy on November 28, 2002, 09:56:00 AM
Post by: Fuzzy on December 02, 2003, 09:29:00 AM
| QUOTE (Auslander @ Nov 30 2003, 04:18 PM) | ||||
having the exact same problem (same XYZ codes) with a 1.0 xbox, using an X2.1 Lite chip. Tried reloading the eeprom with config magic, didn't help. Codes didn't change. ANy other suggestions? |
Hmm, I know it may be a little annoying but its for the sake of science. Would you try swapping back your other HD to see if your codes change...it would be a great help. If you do post the codes. If the other hard drive doesnt change anything, i might be able to hook you up with an eeprom for the service.
Post by: neejoh on December 04, 2003, 06:56:00 AM
Y: 00A8-6800
Z: 8015-190D
1.00.5659.03
Getting an Error Modified Error
XBOX 1.0 PAL Disable switch for Matrix
Post by: thepro8 on December 04, 2003, 08:44:00 PM
X: 0000-f021
Y: 00c2-03E0
Z: 0000-0000
I'm using xbox v1.0 got banned, replaced eeprom and this is what I got. I am using a x2 lite, but it's turned off. The EEPROM I bought was originally PAL, but I changed it to NTSC. I can't figure out what's wrong. I actually have some of this info in one other post, but i thought it would be good here since this is a more proper place.
Post by: blind187 on December 06, 2003, 02:42:00 AM
W: 0000-000b
X: 0000-F001
Y: 00A8-4860
Z: 0000-0000
Version 1.1 PAL , X2 lite , 160gb samsung hard drive , auto ip configuration
Post by: Fuzzy on December 06, 2003, 04:14:00 PM
| QUOTE (Cutriss @ Dec 5 2003, 10:50 AM) | ||
Does the serial number in the help panel match the one on your Xbox or the one on your EEPROM's prior owner's? Or, does it even show up at all? |
Yea thats a real odd one. Curtiss did discover that had something to do with non-matching data or something similar to that. Could we have some more info?
Post by: Fuzzy on December 07, 2003, 08:40:00 AM
DONT EDIT YOUR EEPROM UNLESS CHANGING THE REGION
I have recieved 20 Pms in the last two days from people with c codes and when i ask for details, they're like "i changed my hdkey to get unbanned"
STOP EDITING YOUR EEPROM, AND IF YOU SCREW IT UP, NO I WILL NOT HELP YOU
Sorry once again to be so blunt
EDIT: The first thread has been updated and if you havent read it in a while you might want to go back and do so (btw Cutriss i added you to the thanks list on the bottom)
Post by: Fuzzy on December 07, 2003, 12:05:00 PM
| QUOTE (Cutriss @ Dec 7 2003, 03:58 PM) |
| Fuzzy, Two things - First, I've been ignoring the name spelling up to now, but if you're crediting me (thanks!), then could you spell my name right? Second - The W code *does* change, based on your flow rate - Half Duplex, or Full Duplex. I posted on P.25 about this, IIRC. |
Oops, went back and i missed that and sorry, curtiss cutriss...very similar, fixing and fixing.
Post by: Fuzzy on December 08, 2003, 02:52:00 PM
Post by: Cutriss on December 08, 2003, 03:11:00 PM
| QUOTE (coopdale @ Dec 8 2003, 11:27 PM) |
| The XBOX was originally NTSC/J, but I've changed to NTSC/U (XBE:1, Region:0) via ConfigMagic. Mod is Matrix with Xecuter2 (4873?, I guess) bios. |
I need some info on the order of things.
1. Bought the box in/from Japan.
2. Modded it.
3. Upgraded the HD successfully.
And then later...
4. Changed EEPROM region to US.
Is that right?
I'm thinking that you might have try this:
1. Change your EEPROM region back to Japan.
2. Back up in EvoX (get your EEPROM.bin)
3. Unlock the HD.
4. Change the settings in the EEPROM.
5. Lock the HD again with the changed EEPROM.
6. NOW update the EEPROM on the Xbox.
See how that goes.
Post by: Fuzzy on December 01, 2002, 09:59:00 AM
Post by: crazyj0202 on December 14, 2003, 06:33:00 PM
| QUOTE |
| 00C2 In your second Y code is almost definitely an unconformity in Eeprom info. This is caused by either editing the eeprom so that parts do not match, or other types of unmatching data (can be caused by replacing parts in the xbox or locking and unlock attempting with different things.) Unless you have the original data you cannot fix this and need a new eeprom |
If I do have the data, how do i fix it??
By the way, my xyz is
X:0000 F001
Y:00C2 03E0
Z:0000 0000
Im not sure if I am banned or not. When ever I try to connect to Live on the last tab it says XBOX Live cannot be found. I dont know if i accidentally messes my eeprom up or what, I have a backup of it so that is why I asked above.
Does my xyz appear to be banned?
The 00C2 is what threw me off because it said that it could be due to unmatching data.
I didnt know if I am banned or it I just have some network settings wrong, or if my eeprom is messed up.
Thanks for the help.
Post by: Weable on December 15, 2003, 02:32:00 PM
X:0000 F001
Y:00A8 6860
Z:8015 190D
If I go back to my 120 Gig HD, I get a message indicating "Xbox Live not found" and the following XYZ:
X:0000 F001
Y:00C2 03E0
Z:0000 0000
Any thoughts? Is my box banned or not?
Post by: Weable on December 15, 2003, 02:38:00 PM
X:0000 F001
Y:00A8 6860
Z:8015 190D
If I go back to my 120 Gig HD, I get a message indicating "Xbox Live not found" and the following XYZ:
X:0000 F001
Y:00C2 03E0
Z:0000 0000
Any thoughts? Is my box banned or not?
Post by: Orangey on December 16, 2003, 05:55:00 PM
X: 0000-F001
Y: 00A8-4860
Z: 0000-0000
Post by: Orangey on December 17, 2003, 12:23:00 PM
If your "Y" Code is "6840" for the Second Half. Your Banned, Somehow you accidentally went into XBOX Live with the Chip On...Post by: Fuzzy on December 18, 2003, 03:15:00 PM
| QUOTE (snicker @ Dec 17 2003, 01:53 AM) |
| I recently installed a modchip with a disable button and I thought it would allow me to run my Xbox normally when disabled and run linux when it was enabled. Well, I went to play Counter-Strike tonight (mod chip disabled) and I get the "could not connect to live because of a software or hardware modification". Does this mean my accountis hosed? Can I buy a new Xbox and use my same account? Also, what if I remove the mod chip...will that allow me to connect bact to XBL or is it one of those "We saw you had one in here at one point in time so your box is permanately blocked" things? The second half of my Y code begins with a 6. |
Yea your pretty permanently blocked unless you flash yourself a non-banned eeprom. Most times people dont even notice they log on with their chip on (its usually that damn live aware crap). Sorry man. Be more careful next time (only plug in your net-cable when your sure your chip is off or your sure the game your playing isnt live aware.)
Post by: Fuzzy on December 20, 2003, 10:39:00 AM
| QUOTE (bigshooter13 @ Dec 20 2003, 01:30 PM) |
| Fuzzy, here are my XYZ. Could you please PM if this is banned or not? I don't have an account yet so I'm curious to know if I'm tagged and will be banned upon activation of an account. Thanks! 1.00.5659.03 w: 0000-000B X: 0000-F001 Y: 00AB-4860 Z: 0000-0000 |
No your not banned, as for being tagged it was determined that the previous method was wrong and as of yet we have no information on how to find out if you are tagged. But like i said, your codse look fine for now.
Post by: Fuzzy on December 03, 2002, 06:46:00 PM
IF YOUR SECOND Y CODE BEGINS WITH A 6 YOU ARE BANNED. SO FAR NOONE TO BE BANNED HAS EVER HAD ANYTHING OTHERWISE. THIS IS THE EASIEST WAY TO TELL.
I would appreciate if some more people (banned and not) posted their codes.
Post by: Fuzzy on December 03, 2002, 06:02:00 PM
| QUOTE (Icculus @ Nov 28 2002, 04:16 AM) |
| Hmmm....modded xbox. Matrix that has been in mode 1 since i installed live this morning. Which, btw, is running fine. 0000-F001 00A8-4860 8015-1917 This is the same thing as emoney's original xbox. Therefore 8015 does not equal ban? Cause due to 4860, it should mean that my box is unmodded? hmmm....somethings not right. |
indeed i will have to work on 8015 thanks.
Post by: Fuzzy on December 03, 2002, 06:03:00 PM
| QUOTE (emoney @ Nov 27 2002, 06:15 AM) |
| never been modded xbox... all settings automatic... X: 0000 - F001 Y: 00A8 - 4860 Z: 8015 - 1917 dns manually entered... X: 0000 - F009 Y: 00A8 - 4860 Z: 8015 - 1917 ip and dns manually entered... X: 0000 - 000D Y: 00A8 - 4800 Z: 0000 - 0000 mess with the ip address so it can't find ip... X: 8001 - 0605 Y: 0000 - 0000 Z: 0000 - 0000 mess with dns server so it can't find it (ip manually entered)... X: 0000 - 000D Y: 008C - 0000 Z: 0000 - 274C mess with dns server so it can't find it (ip automaticly found)... X: 0000 - F009 Y: 008C - 0060 Z: 0000 - 274C everything automatic, but block necessary ports so live can't be found on router... X: 0000 - F001 Y: 0088 - 1C60 Z: 8015 - 1917 there ya go.. use this info as you will |
WHOA! thanks dude ill check this sh!t out. (I NEED MORE POSTS LIKE THIS PEOPLE)
Post by: quisp on December 03, 2002, 09:22:00 PM
Enigmah'ed box, banned, manual IP settings:
X: 0000 - 000D
Y: 00A8 - 6800
Z: 8015 - 190D
with auto IP settings:
X: 0000 - F009
Y: 00A8 - 6820
Z: 8015 - 190D
BTW - I was fine during the beta2 period with a mod enabled - it wasn't till retail that I got banned
, even though by then I had installed an off-switch. Is this generally the story, or weren't some people banned during beta? I'm wondering why I wasn't. Sorry if I've missed this buried in the threads.Post by: undead on December 04, 2002, 02:25:00 AM
Messed up Serial, MAC, Online Key and HDD Key...
---------------------------------------------
Internet Connection Online - All Auto
X: 0000 - F001
Y: 00C2 - 01C4
Z: AFFF - 0018
Router cable unplugged (offline) - All Auto
X: 0000 - F001
Y: 00C3 - 0040
Z: 0000 - 274C
Internet Connection Online, xbox and kerberos Ports Blocked (dns resolves, but nothing else)
X: 0000 - F001
Y: 00C2 - 03C0
Z: 0000 - 0000
Valid Serial, MAC, Online Key, Only Messed up HDD Key...
-------------------------------------------------------------------------
Internet Connection Online - All Auto
X: 0000 - F001
Y: 00C2 - 01C4
Z: AFFF - 0018
Post by: Penfoldian on December 24, 2003, 08:38:00 AM
W 0000 000B
X 0001 8005
Y 00A8 4800
Z 0000 0000
i accidently went on for a min or two with the mod on...
what u think?
Btw it still connects but can play games at the mo, i'm still investigating
Post by: xdrei on December 04, 2002, 02:47:00 PM
so no mod chip in, there used to be one (enigmah), and xbox live works:
X:0000-F001
y:00A8-4860
Z:8015-1917
although i have 8015 on z, i'm not banned because it works (hopefully it doesn't mean they are waiting to ban me)
Post by: exoxe on December 26, 2003, 10:34:00 AM
Post by: Fuzzy on December 26, 2003, 12:41:00 PM
| QUOTE (exoxe @ Dec 26 2003, 03:34 PM) |
| I'm still curious as to where to get the XYZ information. The directions on the first page just don't add up to what I'm seeing on my screen. |
How so? Any Specific problems or things you dont see?
Post by: cbworks2000 on December 26, 2003, 01:38:00 PM
Post by: tcar on December 26, 2003, 02:44:00 PM
To make this work again what ID's do I need? just a new valid S/N...?
Thanks
Luke
Post by: dexthageek on December 26, 2003, 04:11:00 PM
Here are my codes
W: 0000 - 000B
X: 0000 - F001
Y: 00A8 - 6860
Z: 8015 - 190D
There is a cash converters about 30minutes from my house, I think im just gonna pick up a used Xbox from there and use it only for Xbox Live.....
Post by: Fuzzy on December 26, 2003, 06:19:00 PM
Guys remember this is very important
On new games you dont have to click the live tab to get banned. The live aware games check for your modchip too. Always unplug your cable when playing any live game ever unless your chip is off and never go the the main page with your chip on
Post by: scoobster on December 04, 2002, 05:32:00 PM
Post by: admiralj on December 26, 2003, 07:30:00 PM
The ONLY thing i have done with an xbox that is generating this message is install a 120gb wd HDD in it. It has a bioxx v4, but it has always been disabled when booting to the ms dash. Someone in this forum said that it may have something to do with the way the hdd was locked - I used config magic... i'll try it with atapwd to see if that matters at all.
suggestions as to what i should do if that doesnt work would be greatly appreciated.
Post by: Fuzzy on December 04, 2002, 05:19:00 PM
| QUOTE (xdrei @ Dec 4 2002, 09:11 PM) |
| Enigma'd xbox before i installed startup disc, since before installing live enigma has always been out of the xbox. Works on Live fine (i traded my original banned xbox with a friend who wasn't gonna buy live). so no mod chip in, there used to be one (enigmah), and xbox live works: X:0000-F001 y:00A8-4860 Z:8015-1917 although i have 8015 on z, i'm not banned because it works (hopefully it doesn't mean they are waiting to ban me) |
im working on 8015, right now it seems to have to do with (dum dum dum) the first 16 bytes of your eeprom!!!! (aka hdkey) thanks to all you (especially undead for F*king everything up for me hehe) ill get cracking and keep posting!!!! (for once i feel like im really helping something. I could be the modders xyz decoder! MS has one, why cant we! lol
)
Post by: PhReaK on December 27, 2003, 03:20:00 AM
Xbox 1.1 with xecuter 2.0 lite with switches, upgraded 40gb hd, theoretically not banned, ip configured manually, dns automatic, still have to create an account:
W: 0000-000B
X: 0001-8005
Y: 008C-0000
Z: 0000-274C
i just want to know if everything is ok, will let you have the codes after i create my account
Post by: jamminj606 on December 04, 2002, 10:17:00 PM
I've been running live for a week now with no problems(keeping my fingers crossed) I only use it under the 4034 bios for online play with retail games.
X: 0000-F001
Y: 00A8-4860
Z: 8015-1919
This post has been edited by jamminj606: Dec 5 2002, 06:20 AM
Post by: tcar on December 28, 2003, 12:18:00 PM
While fiddling with this I found out the following:
1. If you use a static IP in the MS Dash and you have XBOX MediaPlayer also configured with a static IP the XBMP IP, Subnet and gateway is updated on the MS Dash (DNS does not seem to be effected). Is this correct! So I would also suggest that you either supply the wrong gateway or use a DHCP (UPDATE: Unable to test as XBMP running under EVOX when using DHCP causes XBMP to crash and with use static IP - maybe someone else can test) under XBMP, as if you accidentally open the MS Dash you would instantly be connected to live and banned.
2. Even supplying the wrong DNS addresses doesnt seem to stop the XBOX from connecting to live the only way to stop live connectivity is to supply the wrong gateway or remove the cable.
So this could now lead to think why I had a problem as the day before I was banned I had changed the XBMP gateway to be valid and then enter the MS Dash (the gateway kept changing and I didnt understand why). I was able to play on live the following day in the morning, but in the evening I was then banned. I also had configured auto-login as DISABLED and Controlled PIN enabled when accessing Live these didnt appear to stop me from being banned. This is the only way I can explain why I was banned unless something else had happened
Post by: Webstarr on December 29, 2003, 04:24:00 AM
What if you cannont get to your XYZ codes because when u click on the xbox live tab it says it has to update but when it tries to update, it says i cant connect? am i banned?
Post by: AnThRaX on December 29, 2003, 06:59:00 AM
| QUOTE (cbworks2000 @ Dec 26 2003, 05:38 PM) |
| ROFL, I really dont think someone is going to give up a epprom for free. |
I have a contest im holding in my BST thread its best reason for why they need it or they could be chosen at random also giving away free subscribtion codes for live. Check it out. I choose winners every day or 2 at midnight