xboxscene.org forums

Off Topic Forums => Other Platforms => GameCube , Dreamcast & others => Topic started by: EvilWays on October 11, 2004, 01:11:00 AM

Title: Interesting...
Post by: EvilWays on October 11, 2004, 01:11:00 AM

I don't know if this has been brought up before, but something like this would probably help loads with the GC modding scene, particularly the info in the last paragraph.

Title: Interesting...
Post by: el_diablo on October 12, 2004, 02:51:00 AM

i can switch my pal cube to ntsc :)
its quite easy to do.
its harder getting the damn thing apart.

Title: Interesting...
Post by: EvilWays on October 12, 2004, 09:49:00 PM

Title: Interesting...
Post by: Trisman on October 13, 2004, 03:22:00 AM

It's relativly simple to do that.  The region of the cube is set by which pinsa are soldered on the cpu.  All you have to do is solder some wires to the back of it, and put a switch in the middle.  It's like unlocking the multipliers on an amd.  I saw a diagram somewhere that showed which pins did what, but I don't know where it made off to.

Title: Interesting...
Post by: EvilWays on October 13, 2004, 03:52:00 AM

Hmm...sounds like fun.

Title: Interesting...
Post by: el_diablo on October 13, 2004, 06:56:00 AM

if you take off the heat sink, if u look on the side futher away from the front you will see 2 resistors and room for a 3rd. bridge where the third would go and your mod is done :)

This post has been edited by el_diablo on Oct 13 2004, 01:57 PM

Title: Interesting...
Post by: EvilWays on October 14, 2004, 02:30:00 PM

That wouldn't happen to be R6 would it? If that is, then that's the US/Japan mod I know of.

Title: Interesting...
Post by: el_diablo on October 15, 2004, 05:55:00 AM

i cant remember, havent opened my cube for a while.
but thats how i did mine