Post by: FallsInc on June 20, 2004, 02:07:00 AM
we need info.
Post by: MrSelfDestruct on June 23, 2004, 08:47:00 PM
- If you're behind a proxy, you can configure it in the Options Manager too.
It's in "Network options > HTTP options > HTTP proxy"
My xbox's IP on the network is 192.168.8.20, so I put that IP in Network options > HTTP options > HTTP proxy under "HTTP proxy (host:port)(char):"
I saved my options and that still didnt fix the problem. I cant figure out how to get this thing connected to the internet for the life of me. I looked, and there is also no .ini or .xml config file. Any help would be greatly appreciated, because I cant find a FAQ anywhere
Post by: mrRobinson on June 24, 2004, 06:41:00 AM
It doesn't have an .ini or .xml cause it will use the IP settings from the last dash you loaded. So make sure the settings in your dash (esp DNS) are set up correctly for you to access the internet.
Post by: RcbUK on June 25, 2004, 09:23:00 AM
Post by: fezzman on June 25, 2004, 09:26:00 AM
| QUOTE (RcbUK @ Jun 25 2004, 06:23 PM) |
| Have you got a direct download link for this please? |
I don't think you'll find a direct link for this. Just hop onto #xbins and get it.
Post by: RcbUK on June 25, 2004, 09:48:00 AM
| QUOTE (fezzman @ Jun 25 2004, 06:26 PM) |
| I don't think you'll find a direct link for this. Just hop onto #xbins and get it. |
PM'ed, please reply
Post by: damickman on June 25, 2004, 04:35:00 PM
Post by: Mullacy on June 25, 2004, 06:12:00 PM
Post by: RcbUK on June 27, 2004, 05:11:00 AM
Post by: Bocaj22 on June 28, 2004, 06:08:00 AM
Post by: mrRobinson on June 28, 2004, 09:42:00 AM
| QUOTE (Infared @ Jun 27 2004, 08:53 AM) |
| my question: i think my dns is not set up properly. do i use the dns of my main connection to internet or something else? |
Yea you can use it from your main internet connection. run an ipconfig /all on your pc or view your dns whatever way you know how and use those same settings for your xbox.
Post by: BlaCkAdDa on June 29, 2004, 09:49:00 PM
Any settings /switches I'm missing
Post by: ysbox on June 30, 2004, 01:01:00 AM
| QUOTE (BlaCkAdDa @ Jun 30 2004, 06:49 AM) |
| Can mouse work via a hub with kb on same port? I got logitech duo and they both go on same port (only way they can go as it's 1 usb plug to IR device) , like some other apps, kb appears fine but mouse was a no go.. Any settings /switches I'm missing |
People reported them not working.
Keyboard/mouse support in the XDK librairies is rather basic (it is here primarily for debugging), it is clearly stated in the doc that not all devices will work.
And I can't do much about that.
Setting up a bridge means making your PC with 2 NICs act as a "merger" between 2 networks. The whole bridge has 1 common config (IP, subnet mask...) and it relays traffic from one network to the other as they were the same.
And sorry, I said I'd try to make a quick-fix release last week, but then I decided to rewrite the async DNS lookup engine first. Shouldn't take ages.
Post by: Spectracide on July 01, 2004, 03:34:00 PM
edit: nevermind. it was fixed with nkpatcher5, which runs debug code
Post by: BlaCkAdDa on July 19, 2004, 10:15:00 PM
| QUOTE (ysbox @ Jun 30 2004, 09:04 AM) |
| People reported them not working. Keyboard/mouse support in the XDK librairies is rather basic (it is here primarily for debugging), it is clearly stated in the doc that not all devices will work. And I can't do much about that. |
Hey thanks for clearing that up. Bummer for me as that was one of the reasons I bought it ... back when they were over $200
... oh well that'll teach me for making foolish purchases.