xboxscene.org forums

OG Xbox Forums => Software Forums => Xbox Bioses => Topic started by: Psilocybe on May 24, 2004, 02:06:00 PM

Title: How To Update My Bios?
Post by: Psilocybe on May 24, 2004, 02:06:00 PM
you could try flashing from the xbox itself with flashX (xecuter flash program)
Title: How To Update My Bios?
Post by: Llamma on May 26, 2004, 08:01:00 AM
set the mod to 1mb mode and unprotected

user posted image
Title: How To Update My Bios?
Post by: biglips31 on May 26, 2004, 08:23:00 AM
i HAVE TRIED THAT A MILLION TIMES..

wHEN YOU SAY UNPROTECTED HOWEVER, i AM ASSUMING YOU ARE
TALKING ABOUT SWITCH 4? i HAVE TIRED ON & OFF..

i HAVE EVERY CONFIG.. ON THAT SCREEN... i HAVE A PRINTOUT OF THAT WITH ABOUT 20 NOTES ON IT THAT I HAVE TIRED....

THANKS...

Title: How To Update My Bios?
Post by: Psilocybe on May 26, 2004, 10:44:00 AM
switch 4 on = unprotected, 123 off means 1 meg mode
switch 4 on = unprotected, 123 off means 1 meg mode
Title: How To Update My Bios?
Post by: Psilocybe on May 26, 2004, 03:38:00 PM
somehthing has happend to the chip
i would definately check all the cables you have on the inside for secure connections on not only the soldering points but the different cables including your mini ide cable to the programmer port